blob: ed439b1922b1e1903172e2146a86cc6ed3e5f87d [file] [log] [blame]
wdenke2211742002-11-02 23:30:20 +00001/*
2 * (C) Copyright 2000
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
37#define CONFIG_ETX094 1 /* ...on a ETX_094 board */
38
39#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
40#undef CONFIG_8xx_CONS_SMC2
41#undef CONFIG_8xx_CONS_NONE
42#define CONFIG_BAUDRATE 57600
43#if 0
44#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
45#else
46#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
47#endif
48
49#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
50
51#define CONFIG_BOARD_TYPES 1 /* support board types */
52
53#define CONFIG_FLASH_16BIT /* for board with 16bit wide flash */
54#undef SB_ETX094 /* only for SB-Board with 16MB SDRAM */
55#define CONFIG_BOOTP_RANDOM_DELAY /* graceful BOOTP recovery mode */
56
57#define CONFIG_ETHADDR 08:00:06:00:00:00
58
59#ifdef CONFIG_ETHADDR
60#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 /* default MAC can be overwritten once */
61#endif
62
63#undef CONFIG_BOOTARGS
64#define CONFIG_RAMBOOTCOMMAND \
65 "bootp; " \
66 "setenv bootargs root=/dev/ram rw ramdisk_size=4690 " \
67 "U-Boot_version=U-Boot-1.0.x-Date " \
68 "panic=1 " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010069 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
wdenke2211742002-11-02 23:30:20 +000070 "bootm"
71#define CONFIG_NFSBOOTCOMMAND \
72 "bootp; " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010073 "setenv bootargs root=/dev/nfs rw nfsroot=${nfsip}:${rootpath} " \
74 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
wdenke2211742002-11-02 23:30:20 +000075 "bootm"
76#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
77
78#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
79#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
80
81#define CONFIG_WATCHDOG 1 /* watchdog enabled */
82
83#define CONFIG_STATUS_LED 1 /* Status LED enabled */
84
Jon Loeliger5d2ebe12007-07-09 21:16:53 -050085
86/*
87 * BOOTP options
88 */
89#define CONFIG_BOOTP_SUBNETMASK
90#define CONFIG_BOOTP_GATEWAY
91#define CONFIG_BOOTP_HOSTNAME
92#define CONFIG_BOOTP_BOOTPATH
93#define CONFIG_BOOTP_BOOTFILESIZE
wdenke2211742002-11-02 23:30:20 +000094
Jon Loeligerdcaa7152007-07-07 20:56:05 -050095
96/*
97 * Command line configuration.
98 */
99#include <config_cmd_default.h>
100
wdenke2211742002-11-02 23:30:20 +0000101
102/*
103 * Miscellaneous configurable options
104 */
105#define CFG_LONGHELP /* undef to save memory */
106#define CFG_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeligerdcaa7152007-07-07 20:56:05 -0500107#if defined(CONFIG_CMD_KGDB)
wdenke2211742002-11-02 23:30:20 +0000108#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
109#else
110#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
111#endif
112#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
113#define CFG_MAXARGS 16 /* max number of command args */
114#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
115
116#define CFG_MEMTEST_START 0x0300000 /* memtest works on */
117#define CFG_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
118
119#define CFG_LOAD_ADDR 0x100000 /* default load address */
120
121#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
122
123#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
124
125/*
126 * Low Level Configuration Settings
127 * (address mappings, register initial values, etc.)
128 * You should know what you are doing if you make changes here.
129 */
130/*-----------------------------------------------------------------------
131 * Internal Memory Mapped Register
132 */
133#define CFG_IMMR 0xFFF00000
134
135/*-----------------------------------------------------------------------
136 * Definitions for initial stack pointer and data area (in DPRAM)
137 */
138#define CFG_INIT_RAM_ADDR CFG_IMMR
139#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
140#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
141#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
142#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
143
144/*-----------------------------------------------------------------------
145 * Start addresses for the final memory configuration
146 * (Set up by the startup code)
147 * Please note that CFG_SDRAM_BASE _must_ start at 0
148 */
149#define CFG_SDRAM_BASE 0x00000000
150#define CFG_FLASH_BASE 0x40000000
151#ifdef DEBUG
152#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
153#else
154#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
155#endif
156#define CFG_MONITOR_BASE CFG_FLASH_BASE
157#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
158
159/*
160 * For booting Linux, the board info and command line data
161 * have to be in the first 8 MB of memory, since this is
162 * the maximum mapped by the Linux kernel during initialization.
163 */
164#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
165/*-----------------------------------------------------------------------
166 * FLASH organization
167 */
168#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
169#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
170
171#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
172#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
173
174#define CFG_ENV_IS_IN_FLASH 1
175#ifdef CONFIG_FLASH_16BIT
176#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
177#define CFG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */
178#else
179#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
180#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
181#endif
182
183/*-----------------------------------------------------------------------
184 * Hardware Information Block
185 */
186#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
187#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
188#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
189
190/*-----------------------------------------------------------------------
191 * Cache Configuration
192 */
193#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeligerdcaa7152007-07-07 20:56:05 -0500194#if defined(CONFIG_CMD_KGDB)
wdenke2211742002-11-02 23:30:20 +0000195#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
196#endif
197
198/*-----------------------------------------------------------------------
199 * SYPCR - System Protection Control 11-9
200 * SYPCR can only be written once after reset!
201 *-----------------------------------------------------------------------
202 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
203 */
204#if defined(CONFIG_WATCHDOG)
205#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
206 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
207#else
208#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
209#endif /* CONFIG_WATCHDOG */
210
211/*-----------------------------------------------------------------------
212 * SIUMCR - SIU Module Configuration 11-6
213 *-----------------------------------------------------------------------
214 * PCMCIA config., multi-function pin tri-state
215 */
216#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
217
218/*-----------------------------------------------------------------------
219 * TBSCR - Time Base Status and Control 11-26
220 *-----------------------------------------------------------------------
221 * Clear Reference Interrupt Status, Timebase freezing enabled
222 */
223#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
224
225/*-----------------------------------------------------------------------
226 * RTCSC - Real-Time Clock Status and Control Register 11-27
227 *-----------------------------------------------------------------------
228 */
229#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
230
231/*-----------------------------------------------------------------------
232 * PISCR - Periodic Interrupt Status and Control 11-31
233 *-----------------------------------------------------------------------
234 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
235 */
236#define CFG_PISCR (PISCR_PS | PISCR_PITF)
237
238/*-----------------------------------------------------------------------
239 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
240 *-----------------------------------------------------------------------
241 * Reset PLL lock status sticky bit, timer expired status bit and timer
242 * interrupt status bit - leave PLL multiplication factor unchanged !
243 */
244#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
245
246/*-----------------------------------------------------------------------
247 * SCCR - System Clock and reset Control Register 15-27
248 *-----------------------------------------------------------------------
249 * Set clock output, timebase and RTC source and divider,
250 * power management and some other internal clocks
251 */
252#define SCCR_MASK SCCR_EBDF11
253#define CFG_SCCR (SCCR_TBS | \
254 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
255 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
256 SCCR_DFALCD00)
257
258/*-----------------------------------------------------------------------
259 * PCMCIA stuff
260 *-----------------------------------------------------------------------
261 *
262 */
263#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
264#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
265#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
266#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
267#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
268#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
269#define CFG_PCMCIA_IO_ADDR (0xEC000000)
270#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
271
272/*-----------------------------------------------------------------------
273 *
274 *-----------------------------------------------------------------------
275 *
276 */
wdenke2211742002-11-02 23:30:20 +0000277#define CFG_DER 0
278
279/*
280 * Init Memory Controller:
281 *
282 * BR0/1 and OR0/1 (FLASH)
283 */
284
285#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
286#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
287
288/* used to re-map FLASH both when starting from SRAM or FLASH:
289 * restrict access enough to keep SRAM working (if any)
290 * but not too much to meddle with FLASH accesses
291 */
292#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
293#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
294
295/* FLASH timing: ACS = 11, TRLX = 1, CSNT = 0, SCY = 2, EHTR = 0 */
296#define CFG_OR_TIMING_FLASH (OR_ACS_DIV2 | OR_BI | \
wdenk8bde7f72003-06-27 21:31:46 +0000297 OR_SCY_2_CLK | OR_TRLX )
wdenke2211742002-11-02 23:30:20 +0000298
299#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
300#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
301
302#ifdef CONFIG_FLASH_16BIT /* 16 bit data port */
303#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
304#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
305#else /* 32 bit data port */
306#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32)
307#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32)
308#endif /* CONFIG_FLASH_16BIT */
309
310#define CFG_OR1_REMAP CFG_OR0_REMAP
311#define CFG_OR1_PRELIM CFG_OR0_PRELIM
312
313/*
314 * BR2/3 and OR2/3 (SDRAM)
315 *
316 */
317#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
318#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
319#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
320
321/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
322#define CFG_OR_TIMING_SDRAM 0x00000A00
323
324#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
325#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
326
327#define CFG_OR3_PRELIM CFG_OR2_PRELIM
328#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
329
330/*
331 * Memory Periodic Timer Prescaler
332 */
333
334/* periodic timer for refresh */
335#define CFG_MAMR_PTA 23 /* start with divider for 100 MHz */
336
337/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
338#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
339#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
340
341/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
342#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
343#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
344
345/*
346 * MAMR settings for SDRAM
347 */
348
349/* 8 column SDRAM */
350#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
351 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
352 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X)
353/* 9 column SDRAM */
354#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
355 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
356 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X)
357
358
359/*
360 * Internal Definitions
361 *
362 * Boot Flags
363 */
364#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
365#define BOOTFLAG_WARM 0x02 /* Software reboot */
366
367#endif /* __CONFIG_H */