blob: 394dcd6801e24bc99f38c7278843b0eec815b468 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Peter Senna Tschudin6b0071c2017-11-06 19:14:11 +00002/*
3 * Copyright 2017 General Electric Company
4 *
5 * Based on board/freescale/mx53loco/mx53loco_video.c:
6 *
7 * Copyright (C) 2012 Freescale Semiconductor, Inc.
8 * Fabio Estevam <fabio.estevam@freescale.com>
Peter Senna Tschudin6b0071c2017-11-06 19:14:11 +00009 */
10
11#include <common.h>
12#include <linux/list.h>
13#include <asm/gpio.h>
14#include <asm/arch/iomux-mx53.h>
15#include <linux/fb.h>
16#include <ipu_pixfmt.h>
17#include <asm/arch/crm_regs.h>
18#include <asm/arch/imx-regs.h>
19#include <asm/io.h>
20#include <pwm.h>
21#include "ppd_gpio.h"
22
23#define MX53PPD_LCD_POWER IMX_GPIO_NR(3, 24)
24
25static struct fb_videomode const nv_spwg = {
26 .name = "NV-SPWGRGB888",
27 .refresh = 60,
28 .xres = 800,
29 .yres = 480,
30 .pixclock = 15384,
31 .left_margin = 16,
32 .right_margin = 210,
33 .upper_margin = 10,
34 .lower_margin = 22,
35 .hsync_len = 30,
36 .vsync_len = 13,
37 .sync = FB_SYNC_EXT,
38 .vmode = FB_VMODE_NONINTERLACED
39};
40
41void setup_iomux_lcd(void)
42{
43 static const iomux_v3_cfg_t lcd_pads[] = {
44 MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
45 MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
46 MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
47 MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
48 MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
49 MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
50 MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
51 MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
52 MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
53 MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
54 MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
55 MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
56 MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
57 MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
58 MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
59 MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
60 MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
61 MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
62 MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
63 MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
64 MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
65 MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
66 MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
67 MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
68 MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
69 MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
70 MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
71 MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
72 };
73
74 imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
75}
76
77static void lcd_enable(void)
78{
79 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
80 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
81
82 /* Set LDB_DI0 as clock source for IPU_DI0 */
83 clrsetbits_le32(&mxc_ccm->cscmr2,
84 MXC_CCM_CSCMR2_DI0_CLK_SEL_MASK,
85 MXC_CCM_CSCMR2_DI0_CLK_SEL(
86 MXC_CCM_CSCMR2_DI0_CLK_SEL_LDB_DI0_CLK));
87
88 /* Turn on IPU LDB DI0 clocks */
89 setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_LDB_DI0(3));
90
91 /* Turn on IPU DI0 clocks */
92 setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_IPU_DI0(3));
93
94 /* Configure LDB */
95 writel(IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
96 IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
97 IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
98 &iomux->gpr[2]);
99
100 /* Enable backlights */
101 pwm_init(1, 0, 0);
102
103 /* duty cycle 5000000ns, period: 5000000ns */
104 pwm_config(1, 5000000, 5000000);
105
106 /* Backlight Power */
107 gpio_direction_output(BACKLIGHT_ENABLE, 1);
108
109 pwm_enable(1);
110}
111
112static int do_lcd_enable(cmd_tbl_t *cmdtp, int flag, int argc,
113 char * const argv[])
114{
115 lcd_enable();
116 return 0;
117}
118
119U_BOOT_CMD(
120 ppd_lcd_enable, 1, 1, do_lcd_enable,
121 "enable PPD LCD",
122 "no parameters"
123);
124
125int board_video_skip(void)
126{
127 int ret;
128
129 ret = ipuv3_fb_init(&nv_spwg, 0, IPU_PIX_FMT_RGB24);
130 if (ret)
131 printf("Display cannot be configured: %d\n", ret);
132
133 return ret;
134}