Ralph Siemsen | afdfcb1 | 2023-05-12 21:36:57 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: BSD-2-Clause |
| 2 | /* |
| 3 | * Generate Renesas RZ/N1 BootROM header (SPKG) |
| 4 | * (C) Copyright 2022 Schneider Electric |
| 5 | * |
| 6 | * Based on spkg_utility.c |
| 7 | * (C) Copyright 2016 Renesas Electronics Europe Ltd |
| 8 | */ |
| 9 | |
| 10 | #include "imagetool.h" |
| 11 | #include <limits.h> |
| 12 | #include <image.h> |
| 13 | #include <stdarg.h> |
| 14 | #include <stdint.h> |
| 15 | #include <u-boot/crc.h> |
| 16 | #include "renesas_spkgimage.h" |
| 17 | |
| 18 | /* Note: the ordering of the bitfields does not matter */ |
| 19 | struct config_file { |
| 20 | unsigned int version:1; |
| 21 | unsigned int ecc_block_size:2; |
| 22 | unsigned int ecc_enable:1; |
| 23 | unsigned int ecc_scheme:3; |
| 24 | unsigned int ecc_bytes:8; |
| 25 | unsigned int blp_len; |
| 26 | unsigned int padding; |
| 27 | }; |
| 28 | |
| 29 | static struct config_file conf; |
| 30 | |
| 31 | static int check_range(const char *name, int val, int min, int max) |
| 32 | { |
| 33 | if (val < min) { |
| 34 | fprintf(stderr, "Warning: param '%s' adjusted to min %d\n", |
| 35 | name, min); |
| 36 | val = min; |
| 37 | } |
| 38 | |
| 39 | if (val > max) { |
| 40 | fprintf(stderr, "Warning: param '%s' adjusted to max %d\n", |
| 41 | name, max); |
| 42 | val = max; |
| 43 | } |
| 44 | |
| 45 | return val; |
| 46 | } |
| 47 | |
| 48 | static int spkgimage_parse_config_line(char *line, size_t line_num) |
| 49 | { |
| 50 | char *saveptr; |
| 51 | char *delim = "\t "; |
| 52 | char *name = strtok_r(line, delim, &saveptr); |
| 53 | char *val_str = strtok_r(NULL, delim, &saveptr); |
| 54 | int value = atoi(val_str); |
| 55 | |
| 56 | if (!strcmp("VERSION", name)) { |
| 57 | conf.version = check_range(name, value, 1, 15); |
| 58 | } else if (!strcmp("NAND_ECC_ENABLE", name)) { |
| 59 | conf.ecc_enable = check_range(name, value, 0, 1); |
| 60 | } else if (!strcmp("NAND_ECC_BLOCK_SIZE", name)) { |
| 61 | conf.ecc_block_size = check_range(name, value, 0, 2); |
| 62 | } else if (!strcmp("NAND_ECC_SCHEME", name)) { |
| 63 | conf.ecc_scheme = check_range(name, value, 0, 7); |
| 64 | } else if (!strcmp("NAND_BYTES_PER_ECC_BLOCK", name)) { |
| 65 | conf.ecc_bytes = check_range(name, value, 0, 255); |
| 66 | } else if (!strcmp("ADD_DUMMY_BLP", name)) { |
| 67 | conf.blp_len = value ? SPKG_BLP_SIZE : 0; |
| 68 | } else if (!strcmp("PADDING", name)) { |
| 69 | if (strrchr(val_str, 'K')) |
| 70 | value = value * 1024; |
| 71 | else if (strrchr(val_str, 'M')) |
| 72 | value = value * 1024 * 1024; |
| 73 | conf.padding = check_range(name, value, 1, INT_MAX); |
| 74 | } else { |
| 75 | fprintf(stderr, |
Heinrich Schuchardt | 923de76 | 2023-07-04 22:18:09 +0200 | [diff] [blame] | 76 | "config error: unknown keyword on line %zu\n", |
Ralph Siemsen | afdfcb1 | 2023-05-12 21:36:57 -0400 | [diff] [blame] | 77 | line_num); |
| 78 | return -EINVAL; |
| 79 | } |
| 80 | |
| 81 | return 0; |
| 82 | } |
| 83 | |
| 84 | static int spkgimage_parse_config_file(char *filename) |
| 85 | { |
| 86 | FILE *fcfg; |
| 87 | char line[256]; |
| 88 | size_t line_num = 0; |
| 89 | |
| 90 | fcfg = fopen(filename, "r"); |
| 91 | if (!fcfg) |
| 92 | return -EINVAL; |
| 93 | |
| 94 | while (fgets(line, sizeof(line), fcfg)) { |
| 95 | line_num += 1; |
| 96 | |
| 97 | /* Skip blank lines and comments */ |
| 98 | if (line[0] == '\n' || line[0] == '#') |
| 99 | continue; |
| 100 | |
| 101 | /* Strip any trailing newline */ |
| 102 | line[strcspn(line, "\n")] = 0; |
| 103 | |
| 104 | /* Parse the line */ |
| 105 | if (spkgimage_parse_config_line(line, line_num)) |
| 106 | return -EINVAL; |
| 107 | } |
| 108 | |
| 109 | fclose(fcfg); |
| 110 | |
| 111 | /* Avoid divide-by-zero later on */ |
| 112 | if (!conf.padding) |
| 113 | conf.padding = 1; |
| 114 | |
| 115 | return 0; |
| 116 | } |
| 117 | |
| 118 | static int spkgimage_check_params(struct image_tool_params *params) |
| 119 | { |
| 120 | if (!params->addr) { |
| 121 | fprintf(stderr, "Error: Load Address must be set.\n"); |
| 122 | return -EINVAL; |
| 123 | } |
| 124 | |
| 125 | if (!params->imagename || !params->imagename[0]) { |
| 126 | fprintf(stderr, "Error: Image name must be set.\n"); |
| 127 | return -EINVAL; |
| 128 | } |
| 129 | |
| 130 | if (!params->datafile) { |
| 131 | fprintf(stderr, "Error: Data filename must be set.\n"); |
| 132 | return -EINVAL; |
| 133 | } |
| 134 | |
| 135 | return 0; |
| 136 | } |
| 137 | |
| 138 | static int spkgimage_verify_header(unsigned char *ptr, int size, |
| 139 | struct image_tool_params *param) |
| 140 | { |
| 141 | struct spkg_file *file = (struct spkg_file *)ptr; |
| 142 | struct spkg_hdr *header = (struct spkg_hdr *)ptr; |
| 143 | char marker[4] = SPKG_HEADER_MARKER; |
| 144 | uint32_t payload_length; |
| 145 | uint32_t crc; |
| 146 | uint8_t *crc_buf; |
| 147 | |
| 148 | /* Check the marker bytes */ |
| 149 | if (memcmp(header->marker, marker, 4)) { |
| 150 | fprintf(stderr, "Error: invalid marker bytes\n"); |
| 151 | return -EINVAL; |
| 152 | } |
| 153 | |
| 154 | /* Check the CRC */ |
| 155 | crc = crc32(0, ptr, SPKG_HEADER_SIZE - SPKG_CRC_SIZE); |
| 156 | if (crc != header->crc) { |
| 157 | fprintf(stderr, "Error: invalid header CRC=\n"); |
| 158 | return -EINVAL; |
| 159 | } |
| 160 | |
| 161 | /* Check all copies of header are the same */ |
| 162 | for (int i = 1; i < SPKG_HEADER_COUNT; i++) { |
| 163 | if (memcmp(&header[0], &header[i], SPKG_HEADER_SIZE)) { |
| 164 | fprintf(stderr, "Error: header %d mismatch\n", i); |
| 165 | return -EINVAL; |
| 166 | } |
| 167 | } |
| 168 | |
| 169 | /* Check the payload CRC */ |
| 170 | payload_length = le32_to_cpu(header->payload_length) >> 8; |
| 171 | crc_buf = file->payload + payload_length - SPKG_CRC_SIZE; |
| 172 | crc = crc32(0, file->payload, payload_length - SPKG_CRC_SIZE); |
| 173 | if (crc_buf[0] != (crc & 0xff) || |
| 174 | crc_buf[1] != (crc >> 8 & 0xff) || |
| 175 | crc_buf[2] != (crc >> 16 & 0xff) || |
| 176 | crc_buf[3] != (crc >> 24 & 0xff)) { |
| 177 | fprintf(stderr, "Error: invalid payload CRC\n"); |
| 178 | return -EINVAL; |
| 179 | } |
| 180 | |
| 181 | return 0; |
| 182 | } |
| 183 | |
| 184 | static void spkgimage_print_header(const void *ptr, |
| 185 | struct image_tool_params *image) |
| 186 | { |
| 187 | const struct spkg_hdr *h = ptr; |
| 188 | uint32_t offset = le32_to_cpu(h->execution_offset); |
| 189 | |
| 190 | printf("Image type\t: Renesas SPKG Image\n"); |
| 191 | printf("Marker\t\t: %c%c%c%c\n", |
| 192 | h->marker[0], h->marker[1], h->marker[2], h->marker[3]); |
| 193 | printf("Version\t\t: %d\n", h->version); |
| 194 | printf("ECC\t\t: "); |
| 195 | if (h->ecc & 0x20) |
| 196 | printf("Scheme %d, Block size %d, Strength %d\n", |
| 197 | h->ecc_scheme, (h->ecc >> 1) & 3, h->ecc_bytes); |
| 198 | else |
| 199 | printf("Not enabled\n"); |
| 200 | printf("Payload length\t: %d\n", le32_to_cpu(h->payload_length) >> 8); |
| 201 | printf("Load address\t: 0x%08x\n", le32_to_cpu(h->load_address)); |
| 202 | printf("Execution offset: 0x%08x (%s mode)\n", offset & ~1, |
| 203 | offset & 1 ? "THUMB" : "ARM"); |
| 204 | printf("Header checksum\t: 0x%08x\n", le32_to_cpu(h->crc)); |
| 205 | } |
| 206 | |
| 207 | /* |
| 208 | * This is the same as the macro version in include/kernel.h. |
| 209 | * However we cannot include that header, because for host tools, |
| 210 | * it ends up pulling in the host /usr/include/linux/kernel.h, |
| 211 | * which lacks the definition of roundup(). |
| 212 | */ |
| 213 | static inline uint32_t roundup(uint32_t x, uint32_t y) |
| 214 | { |
| 215 | return ((x + y - 1) / y) * y; |
| 216 | } |
| 217 | |
| 218 | static int spkgimage_vrec_header(struct image_tool_params *params, |
| 219 | struct image_type_params *tparams) |
| 220 | { |
| 221 | struct stat s; |
| 222 | struct spkg_file *out_buf; |
| 223 | |
| 224 | /* Parse the config file */ |
| 225 | if (spkgimage_parse_config_file(params->imagename)) { |
| 226 | fprintf(stderr, "Error parsing config file\n"); |
| 227 | exit(EXIT_FAILURE); |
| 228 | } |
| 229 | |
| 230 | /* Get size of input data file */ |
| 231 | if (stat(params->datafile, &s)) { |
| 232 | fprintf(stderr, "Could not stat data file: %s: %s\n", |
| 233 | params->datafile, strerror(errno)); |
| 234 | exit(EXIT_FAILURE); |
| 235 | } |
| 236 | params->orig_file_size = s.st_size; |
| 237 | |
| 238 | /* Determine size of resulting SPKG file */ |
| 239 | uint32_t header_len = SPKG_HEADER_SIZE * SPKG_HEADER_COUNT; |
| 240 | uint32_t payload_len = conf.blp_len + s.st_size + SPKG_CRC_SIZE; |
| 241 | uint32_t total_len = header_len + payload_len; |
| 242 | |
| 243 | /* Round up to next multiple of padding size */ |
| 244 | uint32_t padded_len = roundup(total_len, conf.padding); |
| 245 | |
| 246 | /* Number of padding bytes to add */ |
| 247 | conf.padding = padded_len - total_len; |
| 248 | |
| 249 | /* Fixup payload_len to include padding bytes */ |
| 250 | payload_len += conf.padding; |
| 251 | |
| 252 | /* Prepare the header */ |
| 253 | struct spkg_hdr header = { |
| 254 | .marker = SPKG_HEADER_MARKER, |
| 255 | .version = conf.version, |
| 256 | .ecc = (conf.ecc_enable << 5) | (conf.ecc_block_size << 1), |
| 257 | .ecc_scheme = conf.ecc_scheme, |
| 258 | .ecc_bytes = conf.ecc_bytes, |
| 259 | .payload_length = cpu_to_le32(payload_len << 8), |
| 260 | .load_address = cpu_to_le32(params->addr), |
| 261 | .execution_offset = cpu_to_le32(params->ep - params->addr), |
| 262 | }; |
| 263 | header.crc = crc32(0, (uint8_t *)&header, |
| 264 | sizeof(header) - SPKG_CRC_SIZE); |
| 265 | |
| 266 | /* The SPKG contains 8 copies of the header */ |
| 267 | out_buf = malloc(sizeof(struct spkg_file)); |
| 268 | if (!out_buf) { |
| 269 | fprintf(stderr, "Error: Data filename must be set.\n"); |
| 270 | return -ENOMEM; |
| 271 | } |
| 272 | tparams->hdr = out_buf; |
| 273 | tparams->header_size = sizeof(struct spkg_file); |
| 274 | |
| 275 | /* Fill the SPKG with the headers */ |
| 276 | for (int i = 0; i < SPKG_HEADER_COUNT; i++) |
| 277 | memcpy(&out_buf->header[i], &header, sizeof(header)); |
| 278 | |
| 279 | /* Extra bytes to allocate in the output file */ |
| 280 | return conf.blp_len + conf.padding + 4; |
| 281 | } |
| 282 | |
| 283 | static void spkgimage_set_header(void *ptr, struct stat *sbuf, int ifd, |
| 284 | struct image_tool_params *params) |
| 285 | { |
| 286 | uint8_t *payload = ptr + SPKG_HEADER_SIZE * SPKG_HEADER_COUNT; |
| 287 | uint8_t *file_end = payload + conf.blp_len + params->orig_file_size; |
| 288 | uint8_t *crc_buf = file_end + conf.padding; |
| 289 | uint32_t crc; |
| 290 | |
| 291 | /* Make room for the Dummy BLp header */ |
| 292 | memmove(payload + conf.blp_len, payload, params->orig_file_size); |
| 293 | |
| 294 | /* Fill the SPKG with the Dummy BLp */ |
| 295 | memset(payload, 0x88, conf.blp_len); |
| 296 | |
| 297 | /* |
| 298 | * mkimage copy_file() pads the input file with zeros. |
| 299 | * Replace those zeros with flash friendly one bits. |
| 300 | * The original version skipped the first 4 bytes, |
| 301 | * probably an oversight, but for consistency we |
| 302 | * keep the same behaviour. |
| 303 | */ |
| 304 | if (conf.padding >= 4) |
| 305 | memset(file_end + 4, 0xff, conf.padding - 4); |
| 306 | |
| 307 | /* Add Payload CRC */ |
| 308 | crc = crc32(0, payload, crc_buf - payload); |
| 309 | crc_buf[0] = crc; |
| 310 | crc_buf[1] = crc >> 8; |
| 311 | crc_buf[2] = crc >> 16; |
| 312 | crc_buf[3] = crc >> 24; |
| 313 | } |
| 314 | |
| 315 | static int spkgimage_check_image_types(uint8_t type) |
| 316 | { |
| 317 | return type == IH_TYPE_RENESAS_SPKG ? 0 : -EINVAL; |
| 318 | } |
| 319 | |
| 320 | /* |
| 321 | * spkgimage type parameter definition |
| 322 | */ |
| 323 | U_BOOT_IMAGE_TYPE( |
| 324 | spkgimage, |
| 325 | "Renesas SPKG Image", |
| 326 | 0, |
| 327 | NULL, |
| 328 | spkgimage_check_params, |
| 329 | spkgimage_verify_header, |
| 330 | spkgimage_print_header, |
| 331 | spkgimage_set_header, |
| 332 | NULL, |
| 333 | spkgimage_check_image_types, |
| 334 | NULL, |
| 335 | spkgimage_vrec_header |
| 336 | ); |