| Oliver Schinagl | 5c7f10f | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 1 | config AXP221_POWER |
| 2 | boolean "axp221 pmic support" |
| 3 | depends on MACH_SUN6I |
| 4 | default y |
| 5 | ---help--- |
| 6 | Say y here to enable support for the axp221 pmic found on most sun6i |
| 7 | (A31) boards. |
| 8 | |
| 9 | config AXP221_DLDO1_VOLT |
| 10 | int "axp221 dldo1 voltage" |
| 11 | depends on AXP221_POWER |
| 12 | default -1 |
| 13 | ---help--- |
| 14 | Set the voltage (mV) to program the axp221 dldo1 at, set to -1 to |
| 15 | disable dldo1. |
| 16 | |
| 17 | config AXP221_DLDO4_VOLT |
| 18 | int "axp221 dldo4 voltage" |
| 19 | depends on AXP221_POWER |
| 20 | default -1 |
| 21 | ---help--- |
| 22 | Set the voltage (mV) to program the axp221 dldo4 at, set to -1 to |
| 23 | disable dldo4. |
| 24 | |
| 25 | config AXP221_ALDO1_VOLT |
| 26 | int "axp221 aldo1 voltage" |
| 27 | depends on AXP221_POWER |
| 28 | default -1 |
| 29 | ---help--- |
| 30 | Set the voltage (mV) to program the axp221 aldo1 at, set to -1 to |
| 31 | disable aldo1. |
| 32 | |
| 33 | config AXP221_ALDO2_VOLT |
| 34 | int "axp221 aldo2 voltage" |
| 35 | depends on AXP221_POWER |
| 36 | default -1 |
| 37 | ---help--- |
| 38 | Set the voltage (mV) to program the axp221 aldo2 at, set to -1 to |
| 39 | disable aldo2. |
| 40 | |
| 41 | config AXP221_ALDO3_VOLT |
| 42 | int "axp221 aldo3 voltage" |
| 43 | depends on AXP221_POWER |
| 44 | default -1 |
| 45 | ---help--- |
| 46 | Set the voltage (mV) to program the axp221 aldo3 at, set to -1 to |
| 47 | disable aldo3. |