blob: a3285ebe5cdffed2254b216ce8bb436a37c2f8ed [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Oleksandr G Zhadan8b0044f2015-04-29 16:57:39 -04002/*
3 * Copyright 2013-2015 Arcturus Networks, Inc.
4 * http://www.arcturusnetworks.com/products/ucp1020/
5 * based on board/freescale/p1_p2_rdb_pc/spl.c
6 * original copyright follows:
7 * Copyright 2013 Freescale Semiconductor, Inc.
Oleksandr G Zhadan8b0044f2015-04-29 16:57:39 -04008 */
9
10#include <common.h>
Simon Glass2189d5f2019-11-14 12:57:20 -070011#include <vsprintf.h>
Oleksandr G Zhadan8b0044f2015-04-29 16:57:39 -040012#include <asm/mmu.h>
13#include <asm/immap_85xx.h>
14#include <asm/processor.h>
15#include <fsl_ddr_sdram.h>
16#include <fsl_ddr_dimm_params.h>
17#include <asm/io.h>
18#include <asm/fsl_law.h>
19
20#ifdef CONFIG_SYS_DDR_RAW_TIMING
21#if defined(CONFIG_UCP1020) || defined(CONFIG_UCP1020T1)
22/*
23 * Micron MT41J128M16HA-15E
24 * */
25dimm_params_t ddr_raw_timing = {
26 .n_ranks = 1,
27 .rank_density = 536870912u,
28 .capacity = 536870912u,
29 .primary_sdram_width = 32,
30 .ec_sdram_width = 8,
31 .registered_dimm = 0,
32 .mirrored_dimm = 0,
33 .n_row_addr = 14,
34 .n_col_addr = 10,
35 .n_banks_per_sdram_device = 8,
36 .edc_config = 2,
37 .burst_lengths_bitmask = 0x0c,
38
39 .tckmin_x_ps = 1650,
40 .caslat_x = 0x7e << 4, /* 5,6,7,8,9,10 */
41 .taa_ps = 14050,
42 .twr_ps = 15000,
43 .trcd_ps = 13500,
44 .trrd_ps = 75000,
45 .trp_ps = 13500,
46 .tras_ps = 40000,
47 .trc_ps = 49500,
48 .trfc_ps = 160000,
49 .twtr_ps = 75000,
50 .trtp_ps = 75000,
51 .refresh_rate_ps = 7800000,
52 .tfaw_ps = 30000,
53};
54
55#else
56#error Missing raw timing data for this board
57#endif
58
59int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
60 unsigned int controller_number,
61 unsigned int dimm_number)
62{
63 const char dimm_model[] = "Fixed DDR on board";
64
65 if ((controller_number == 0) && (dimm_number == 0)) {
66 memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
67 memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
68 memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
69 }
70
71 return 0;
72}
73#endif /* CONFIG_SYS_DDR_RAW_TIMING */
74
75#ifdef CONFIG_SYS_DDR_CS0_BNDS
76/* Fixed sdram init -- doesn't use serial presence detect. */
77phys_size_t fixed_sdram(void)
78{
79 sys_info_t sysinfo;
80 char buf[32];
81 size_t ddr_size;
82 fsl_ddr_cfg_regs_t ddr_cfg_regs = {
83 .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
84 .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
85 .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
86#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
87 .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
88 .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
89 .cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2,
90#endif
91 .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3,
92 .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0,
93 .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1,
94 .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2,
95 .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
96 .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
97 .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1,
98 .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2,
99 .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
100 .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL,
101 .ddr_data_init = CONFIG_SYS_DDR_DATA_INIT,
102 .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL,
103 .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
104 .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
105 .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
106 .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
107 .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
108 .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
109 .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
110 .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
111 .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
112 };
113
114 get_sys_info(&sysinfo);
115 printf("Configuring DDR for %s MT/s data rate\n",
116 strmhz(buf, sysinfo.freq_ddrbus));
117
118 ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
119
120 fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
121
122 if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
123 ddr_size, LAW_TRGT_IF_DDR_1) < 0) {
124 printf("ERROR setting Local Access Windows for DDR\n");
125 return 0;
126 };
127
128 return ddr_size;
129}
130#endif
131
132void fsl_ddr_board_options(memctl_options_t *popts,
133 dimm_params_t *pdimm,
134 unsigned int ctrl_num)
135{
136 int i;
137
138 popts->clk_adjust = 6;
139 popts->cpo_override = 0x1f;
140 popts->write_data_delay = 2;
141 popts->half_strength_driver_enable = 1;
142 /* Write leveling override */
143 popts->wrlvl_en = 1;
144 popts->wrlvl_override = 1;
145 popts->wrlvl_sample = 0xf;
146 popts->wrlvl_start = 0x8;
147 popts->trwt_override = 1;
148 popts->trwt = 0;
149
150 if (pdimm->primary_sdram_width == 64)
151 popts->data_bus_width = 0;
152 else if (pdimm->primary_sdram_width == 32)
153 popts->data_bus_width = 1;
154 else
155 printf("Error in DDR bus width configuration!\n");
156
157 for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
158 popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
159 popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
160 }
161}