blob: 4a2729f5ca3f0113be3e02e72f9c427fe02207cc [file] [log] [blame]
Jagan Tekib82a1852019-11-18 16:59:40 +05301// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/* Copyright (c) 2018-2019 SiFive, Inc */
3
4#include "fu540-c000.dtsi"
Pragnesh Patel25d08532020-05-29 11:33:33 +05305#include <dt-bindings/gpio/gpio.h>
Jagan Tekib82a1852019-11-18 16:59:40 +05306
7/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
8#define RTCCLK_FREQ 1000000
9
10/ {
11 #address-cells = <2>;
12 #size-cells = <2>;
13 model = "SiFive HiFive Unleashed A00";
14 compatible = "sifive,hifive-unleashed-a00", "sifive,fu540-c000";
15
16 chosen {
17 stdout-path = "serial0";
18 };
19
20 cpus {
21 timebase-frequency = <RTCCLK_FREQ>;
22 };
23
24 memory@80000000 {
25 device_type = "memory";
26 reg = <0x0 0x80000000 0x2 0x00000000>;
27 };
28
29 soc {
30 };
31
32 hfclk: hfclk {
33 #clock-cells = <0>;
34 compatible = "fixed-clock";
35 clock-frequency = <33333333>;
36 clock-output-names = "hfclk";
37 };
38
39 rtcclk: rtcclk {
40 #clock-cells = <0>;
41 compatible = "fixed-clock";
42 clock-frequency = <RTCCLK_FREQ>;
43 clock-output-names = "rtcclk";
44 };
Pragnesh Patel25d08532020-05-29 11:33:33 +053045 gpio-restart {
46 compatible = "gpio-restart";
47 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
48 };
Jagan Tekib82a1852019-11-18 16:59:40 +053049};
50
51&uart0 {
52 status = "okay";
53};
54
55&uart1 {
56 status = "okay";
57};
58
59&i2c0 {
60 status = "okay";
61};
62
63&qspi0 {
64 status = "okay";
65 flash@0 {
66 compatible = "issi,is25wp256", "jedec,spi-nor";
67 reg = <0>;
68 spi-max-frequency = <50000000>;
69 m25p,fast-read;
70 spi-tx-bus-width = <4>;
71 spi-rx-bus-width = <4>;
72 };
73};
74
75&qspi2 {
76 status = "okay";
77 mmc@0 {
78 compatible = "mmc-spi-slot";
79 reg = <0>;
80 spi-max-frequency = <20000000>;
81 voltage-ranges = <3300 3300>;
82 disable-wp;
83 };
84};
85
86&eth0 {
87 status = "okay";
88 phy-mode = "gmii";
89 phy-handle = <&phy0>;
90 phy0: ethernet-phy@0 {
91 reg = <0>;
92 };
93};
94
95&pwm0 {
96 status = "okay";
97};
98
99&pwm1 {
100 status = "okay";
101};
Pragnesh Patel25d08532020-05-29 11:33:33 +0530102
103&gpio {
104 status = "okay";
105};