blob: 977feec3511cc0f80d8194a38c4e9d86611dd303 [file] [log] [blame]
Jiandong Zheng799e1252014-08-01 20:37:16 -07001/*
2 * Copyright 2014 Broadcom Corporation.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#ifdef BCM_GMAC_DEBUG
8#ifndef DEBUG
9#define DEBUG
10#endif
11#endif
12
13#include <config.h>
14#include <common.h>
15#include <malloc.h>
16#include <net.h>
17#include <asm/io.h>
18#include <phy.h>
19
20#include "bcm-sf2-eth.h"
21#include "bcm-sf2-eth-gmac.h"
22
23#define SPINWAIT(exp, us) { \
24 uint countdown = (us) + 9; \
25 while ((exp) && (countdown >= 10)) {\
26 udelay(10); \
27 countdown -= 10; \
28 } \
29}
30
31static int gmac_disable_dma(struct eth_dma *dma, int dir);
32static int gmac_enable_dma(struct eth_dma *dma, int dir);
33
34/* DMA Descriptor */
35typedef struct {
36 /* misc control bits */
37 uint32_t ctrl1;
38 /* buffer count and address extension */
39 uint32_t ctrl2;
40 /* memory address of the date buffer, bits 31:0 */
41 uint32_t addrlow;
42 /* memory address of the date buffer, bits 63:32 */
43 uint32_t addrhigh;
44} dma64dd_t;
45
46uint32_t g_dmactrlflags;
47
48static uint32_t dma_ctrlflags(uint32_t mask, uint32_t flags)
49{
50 debug("%s enter\n", __func__);
51
52 g_dmactrlflags &= ~mask;
53 g_dmactrlflags |= flags;
54
55 /* If trying to enable parity, check if parity is actually supported */
56 if (g_dmactrlflags & DMA_CTRL_PEN) {
57 uint32_t control;
58
59 control = readl(GMAC0_DMA_TX_CTRL_ADDR);
60 writel(control | D64_XC_PD, GMAC0_DMA_TX_CTRL_ADDR);
61 if (readl(GMAC0_DMA_TX_CTRL_ADDR) & D64_XC_PD) {
62 /*
63 * We *can* disable it, therefore it is supported;
64 * restore control register
65 */
66 writel(control, GMAC0_DMA_TX_CTRL_ADDR);
67 } else {
68 /* Not supported, don't allow it to be enabled */
69 g_dmactrlflags &= ~DMA_CTRL_PEN;
70 }
71 }
72
73 return g_dmactrlflags;
74}
75
76static inline void reg32_clear_bits(uint32_t reg, uint32_t value)
77{
78 uint32_t v = readl(reg);
79 v &= ~(value);
80 writel(v, reg);
81}
82
83static inline void reg32_set_bits(uint32_t reg, uint32_t value)
84{
85 uint32_t v = readl(reg);
86 v |= value;
87 writel(v, reg);
88}
89
90#ifdef BCM_GMAC_DEBUG
91static void dma_tx_dump(struct eth_dma *dma)
92{
93 dma64dd_t *descp = NULL;
94 uint8_t *bufp;
95 int i;
96
97 printf("TX DMA Register:\n");
98 printf("control:0x%x; ptr:0x%x; addrl:0x%x; addrh:0x%x; stat0:0x%x, stat1:0x%x\n",
99 readl(GMAC0_DMA_TX_CTRL_ADDR),
100 readl(GMAC0_DMA_TX_PTR_ADDR),
101 readl(GMAC0_DMA_TX_ADDR_LOW_ADDR),
102 readl(GMAC0_DMA_TX_ADDR_HIGH_ADDR),
103 readl(GMAC0_DMA_TX_STATUS0_ADDR),
104 readl(GMAC0_DMA_TX_STATUS1_ADDR));
105
106 printf("TX Descriptors:\n");
107 for (i = 0; i < TX_BUF_NUM; i++) {
108 descp = (dma64dd_t *)(dma->tx_desc_aligned) + i;
109 printf("ctrl1:0x%08x; ctrl2:0x%08x; addr:0x%x 0x%08x\n",
110 descp->ctrl1, descp->ctrl2,
111 descp->addrhigh, descp->addrlow);
112 }
113
114 printf("TX Buffers:\n");
115 /* Initialize TX DMA descriptor table */
116 for (i = 0; i < TX_BUF_NUM; i++) {
117 bufp = (uint8_t *)(dma->tx_buf + i * TX_BUF_SIZE);
118 printf("buf%d:0x%x; ", i, (uint32_t)bufp);
119 }
120 printf("\n");
121}
122
123static void dma_rx_dump(struct eth_dma *dma)
124{
125 dma64dd_t *descp = NULL;
126 uint8_t *bufp;
127 int i;
128
129 printf("RX DMA Register:\n");
130 printf("control:0x%x; ptr:0x%x; addrl:0x%x; addrh:0x%x; stat0:0x%x, stat1:0x%x\n",
131 readl(GMAC0_DMA_RX_CTRL_ADDR),
132 readl(GMAC0_DMA_RX_PTR_ADDR),
133 readl(GMAC0_DMA_RX_ADDR_LOW_ADDR),
134 readl(GMAC0_DMA_RX_ADDR_HIGH_ADDR),
135 readl(GMAC0_DMA_RX_STATUS0_ADDR),
136 readl(GMAC0_DMA_RX_STATUS1_ADDR));
137
138 printf("RX Descriptors:\n");
139 for (i = 0; i < RX_BUF_NUM; i++) {
140 descp = (dma64dd_t *)(dma->rx_desc_aligned) + i;
141 printf("ctrl1:0x%08x; ctrl2:0x%08x; addr:0x%x 0x%08x\n",
142 descp->ctrl1, descp->ctrl2,
143 descp->addrhigh, descp->addrlow);
144 }
145
146 printf("RX Buffers:\n");
147 for (i = 0; i < RX_BUF_NUM; i++) {
148 bufp = dma->rx_buf + i * RX_BUF_SIZE;
149 printf("buf%d:0x%x; ", i, (uint32_t)bufp);
150 }
151 printf("\n");
152}
153#endif
154
155static int dma_tx_init(struct eth_dma *dma)
156{
157 dma64dd_t *descp = NULL;
158 uint8_t *bufp;
159 int i;
160 uint32_t ctrl;
161
162 debug("%s enter\n", __func__);
163
164 /* clear descriptor memory */
165 memset((void *)(dma->tx_desc_aligned), 0,
166 TX_BUF_NUM * sizeof(dma64dd_t));
167 memset(dma->tx_buf, 0, TX_BUF_NUM * TX_BUF_SIZE);
168
169 /* Initialize TX DMA descriptor table */
170 for (i = 0; i < TX_BUF_NUM; i++) {
171 descp = (dma64dd_t *)(dma->tx_desc_aligned) + i;
172 bufp = dma->tx_buf + i * TX_BUF_SIZE;
173 /* clear buffer memory */
174 memset((void *)bufp, 0, TX_BUF_SIZE);
175
176 ctrl = 0;
177 /* if last descr set endOfTable */
178 if (i == (TX_BUF_NUM-1))
179 ctrl = D64_CTRL1_EOT;
180 descp->ctrl1 = ctrl;
181 descp->ctrl2 = 0;
182 descp->addrlow = (uint32_t)bufp;
183 descp->addrhigh = 0;
184 }
185
186 /* flush descriptor and buffer */
187 descp = dma->tx_desc_aligned;
188 bufp = dma->tx_buf;
189 flush_dcache_range((unsigned long)descp,
190 (unsigned long)(descp +
191 sizeof(dma64dd_t) * TX_BUF_NUM));
192 flush_dcache_range((unsigned long)(bufp),
193 (unsigned long)(bufp + TX_BUF_SIZE * TX_BUF_NUM));
194
195 /* initialize the DMA channel */
196 writel((uint32_t)(dma->tx_desc_aligned), GMAC0_DMA_TX_ADDR_LOW_ADDR);
197 writel(0, GMAC0_DMA_TX_ADDR_HIGH_ADDR);
198
199 /* now update the dma last descriptor */
200 writel(((uint32_t)(dma->tx_desc_aligned)) & D64_XP_LD_MASK,
201 GMAC0_DMA_TX_PTR_ADDR);
202
203 return 0;
204}
205
206static int dma_rx_init(struct eth_dma *dma)
207{
208 uint32_t last_desc;
209 dma64dd_t *descp = NULL;
210 uint8_t *bufp;
211 uint32_t ctrl;
212 int i;
213
214 debug("%s enter\n", __func__);
215
216 /* clear descriptor memory */
217 memset((void *)(dma->rx_desc_aligned), 0,
218 RX_BUF_NUM * sizeof(dma64dd_t));
219 /* clear buffer memory */
220 memset(dma->rx_buf, 0, RX_BUF_NUM * RX_BUF_SIZE);
221
222 /* Initialize RX DMA descriptor table */
223 for (i = 0; i < RX_BUF_NUM; i++) {
224 descp = (dma64dd_t *)(dma->rx_desc_aligned) + i;
225 bufp = dma->rx_buf + i * RX_BUF_SIZE;
226 ctrl = 0;
227 /* if last descr set endOfTable */
228 if (i == (RX_BUF_NUM - 1))
229 ctrl = D64_CTRL1_EOT;
230 descp->ctrl1 = ctrl;
231 descp->ctrl2 = RX_BUF_SIZE;
232 descp->addrlow = (uint32_t)bufp;
233 descp->addrhigh = 0;
234
235 last_desc = ((uint32_t)(descp) & D64_XP_LD_MASK)
236 + sizeof(dma64dd_t);
237 }
238
239 descp = dma->rx_desc_aligned;
240 bufp = dma->rx_buf;
241 /* flush descriptor and buffer */
242 flush_dcache_range((unsigned long)descp,
243 (unsigned long)(descp +
244 sizeof(dma64dd_t) * RX_BUF_NUM));
245 flush_dcache_range((unsigned long)(bufp),
246 (unsigned long)(bufp + RX_BUF_SIZE * RX_BUF_NUM));
247
248 /* initailize the DMA channel */
249 writel((uint32_t)descp, GMAC0_DMA_RX_ADDR_LOW_ADDR);
250 writel(0, GMAC0_DMA_RX_ADDR_HIGH_ADDR);
251
252 /* now update the dma last descriptor */
253 writel(last_desc, GMAC0_DMA_RX_PTR_ADDR);
254
255 return 0;
256}
257
258static int dma_init(struct eth_dma *dma)
259{
260 debug(" %s enter\n", __func__);
261
262 /*
263 * Default flags: For backwards compatibility both
264 * Rx Overflow Continue and Parity are DISABLED.
265 */
266 dma_ctrlflags(DMA_CTRL_ROC | DMA_CTRL_PEN, 0);
267
268 debug("rx burst len 0x%x\n",
269 (readl(GMAC0_DMA_RX_CTRL_ADDR) & D64_RC_BL_MASK)
270 >> D64_RC_BL_SHIFT);
271 debug("tx burst len 0x%x\n",
272 (readl(GMAC0_DMA_TX_CTRL_ADDR) & D64_XC_BL_MASK)
273 >> D64_XC_BL_SHIFT);
274
275 dma_tx_init(dma);
276 dma_rx_init(dma);
277
278 /* From end of chip_init() */
279 /* enable the overflow continue feature and disable parity */
280 dma_ctrlflags(DMA_CTRL_ROC | DMA_CTRL_PEN /* mask */,
281 DMA_CTRL_ROC /* value */);
282
283 return 0;
284}
285
286static int dma_deinit(struct eth_dma *dma)
287{
288 debug(" %s enter\n", __func__);
289
290 gmac_disable_dma(dma, MAC_DMA_RX);
291 gmac_disable_dma(dma, MAC_DMA_TX);
292
293 free(dma->tx_buf);
294 dma->tx_buf = NULL;
295 free(dma->tx_desc);
296 dma->tx_desc = NULL;
297 dma->tx_desc_aligned = NULL;
298
299 free(dma->rx_buf);
300 dma->rx_buf = NULL;
301 free(dma->rx_desc);
302 dma->rx_desc = NULL;
303 dma->rx_desc_aligned = NULL;
304
305 return 0;
306}
307
308int gmac_tx_packet(struct eth_dma *dma, void *packet, int length)
309{
310 uint8_t *bufp = dma->tx_buf + dma->cur_tx_index * TX_BUF_SIZE;
311
312 /* kick off the dma */
313 size_t len = length;
314 int txout = dma->cur_tx_index;
315 uint32_t flags;
316 dma64dd_t *descp = NULL;
317 uint32_t ctrl;
318 uint32_t last_desc = (((uint32_t)dma->tx_desc_aligned) +
319 sizeof(dma64dd_t)) & D64_XP_LD_MASK;
320 size_t buflen;
321
322 debug("%s enter\n", __func__);
323
324 /* load the buffer */
325 memcpy(bufp, packet, len);
326
327 /* Add 4 bytes for Ethernet FCS/CRC */
328 buflen = len + 4;
329
330 ctrl = (buflen & D64_CTRL2_BC_MASK);
331
332 /* the transmit will only be one frame or set SOF, EOF */
333 /* also set int on completion */
334 flags = D64_CTRL1_SOF | D64_CTRL1_IOC | D64_CTRL1_EOF;
335
336 /* txout points to the descriptor to uset */
337 /* if last descriptor then set EOT */
338 if (txout == (TX_BUF_NUM - 1)) {
339 flags |= D64_CTRL1_EOT;
340 last_desc = ((uint32_t)(dma->tx_desc_aligned)) & D64_XP_LD_MASK;
341 }
342
343 /* write the descriptor */
344 descp = ((dma64dd_t *)(dma->tx_desc_aligned)) + txout;
345 descp->addrlow = (uint32_t)bufp;
346 descp->addrhigh = 0;
347 descp->ctrl1 = flags;
348 descp->ctrl2 = ctrl;
349
350 /* flush descriptor and buffer */
351 flush_dcache_range((unsigned long)descp,
352 (unsigned long)(descp + sizeof(dma64dd_t)));
353 flush_dcache_range((unsigned long)bufp,
354 (unsigned long)(bufp + TX_BUF_SIZE));
355
356 /* now update the dma last descriptor */
357 writel(last_desc, GMAC0_DMA_TX_PTR_ADDR);
358
359 /* tx dma should be enabled so packet should go out */
360
361 /* update txout */
362 dma->cur_tx_index = (txout + 1) & (TX_BUF_NUM - 1);
363
364 return 0;
365}
366
367bool gmac_check_tx_done(struct eth_dma *dma)
368{
369 /* wait for tx to complete */
370 uint32_t intstatus;
371 bool xfrdone = false;
372
373 debug("%s enter\n", __func__);
374
375 intstatus = readl(GMAC0_INT_STATUS_ADDR);
376
377 debug("int(0x%x)\n", intstatus);
378 if (intstatus & (I_XI0 | I_XI1 | I_XI2 | I_XI3)) {
379 xfrdone = true;
380 /* clear the int bits */
381 intstatus &= ~(I_XI0 | I_XI1 | I_XI2 | I_XI3);
382 writel(intstatus, GMAC0_INT_STATUS_ADDR);
383 } else {
384 debug("Tx int(0x%x)\n", intstatus);
385 }
386
387 return xfrdone;
388}
389
390int gmac_check_rx_done(struct eth_dma *dma, uint8_t *buf)
391{
392 void *bufp, *datap;
393 size_t rcvlen = 0, buflen = 0;
394 uint32_t stat0 = 0, stat1 = 0;
395 uint32_t control, offset;
396 uint8_t statbuf[HWRXOFF*2];
397
398 int index, curr, active;
399 dma64dd_t *descp = NULL;
400
401 /* udelay(50); */
402
403 /*
404 * this api will check if a packet has been received.
405 * If so it will return the address of the buffer and current
406 * descriptor index will be incremented to the
407 * next descriptor. Once done with the frame the buffer should be
408 * added back onto the descriptor and the lastdscr should be updated
409 * to this descriptor.
410 */
411 index = dma->cur_rx_index;
412 offset = (uint32_t)(dma->rx_desc_aligned);
413 stat0 = readl(GMAC0_DMA_RX_STATUS0_ADDR) & D64_RS0_CD_MASK;
414 stat1 = readl(GMAC0_DMA_RX_STATUS1_ADDR) & D64_RS0_CD_MASK;
415 curr = ((stat0 - offset) & D64_RS0_CD_MASK) / sizeof(dma64dd_t);
416 active = ((stat1 - offset) & D64_RS0_CD_MASK) / sizeof(dma64dd_t);
417
418 /* check if any frame */
419 if (index == curr)
420 return -1;
421
422 debug("received packet\n");
423 debug("expect(0x%x) curr(0x%x) active(0x%x)\n", index, curr, active);
424 /* remove warning */
425 if (index == active)
426 ;
427
428 /* get the packet pointer that corresponds to the rx descriptor */
429 bufp = dma->rx_buf + index * RX_BUF_SIZE;
430
431 descp = (dma64dd_t *)(dma->rx_desc_aligned) + index;
432 /* flush descriptor and buffer */
433 flush_dcache_range((unsigned long)descp,
434 (unsigned long)(descp + sizeof(dma64dd_t)));
435 flush_dcache_range((unsigned long)bufp,
436 (unsigned long)(bufp + RX_BUF_SIZE));
437
438 buflen = (descp->ctrl2 & D64_CTRL2_BC_MASK);
439
440 stat0 = readl(GMAC0_DMA_RX_STATUS0_ADDR);
441 stat1 = readl(GMAC0_DMA_RX_STATUS1_ADDR);
442
443 debug("bufp(0x%x) index(0x%x) buflen(0x%x) stat0(0x%x) stat1(0x%x)\n",
444 (uint32_t)bufp, index, buflen, stat0, stat1);
445
446 dma->cur_rx_index = (index + 1) & (RX_BUF_NUM - 1);
447
448 /* get buffer offset */
449 control = readl(GMAC0_DMA_RX_CTRL_ADDR);
450 offset = (control & D64_RC_RO_MASK) >> D64_RC_RO_SHIFT;
451 rcvlen = *(uint16_t *)bufp;
452
453 debug("Received %d bytes\n", rcvlen);
454 /* copy status into temp buf then copy data from rx buffer */
455 memcpy(statbuf, bufp, offset);
456 datap = (void *)((uint32_t)bufp + offset);
457 memcpy(buf, datap, rcvlen);
458
459 /* update descriptor that is being added back on ring */
460 descp->ctrl2 = RX_BUF_SIZE;
461 descp->addrlow = (uint32_t)bufp;
462 descp->addrhigh = 0;
463 /* flush descriptor */
464 flush_dcache_range((unsigned long)descp,
465 (unsigned long)(descp + sizeof(dma64dd_t)));
466
467 /* set the lastdscr for the rx ring */
468 writel(((uint32_t)descp) & D64_XP_LD_MASK, GMAC0_DMA_RX_PTR_ADDR);
469
470 return (int)rcvlen;
471}
472
473static int gmac_disable_dma(struct eth_dma *dma, int dir)
474{
475 int status;
476
477 debug("%s enter\n", __func__);
478
479 if (dir == MAC_DMA_TX) {
480 /* address PR8249/PR7577 issue */
481 /* suspend tx DMA first */
482 writel(D64_XC_SE, GMAC0_DMA_TX_CTRL_ADDR);
483 SPINWAIT(((status = (readl(GMAC0_DMA_TX_STATUS0_ADDR) &
484 D64_XS0_XS_MASK)) !=
485 D64_XS0_XS_DISABLED) &&
486 (status != D64_XS0_XS_IDLE) &&
487 (status != D64_XS0_XS_STOPPED), 10000);
488
489 /*
490 * PR2414 WAR: DMA engines are not disabled until
491 * transfer finishes
492 */
493 writel(0, GMAC0_DMA_TX_CTRL_ADDR);
494 SPINWAIT(((status = (readl(GMAC0_DMA_TX_STATUS0_ADDR) &
495 D64_XS0_XS_MASK)) !=
496 D64_XS0_XS_DISABLED), 10000);
497
498 /* wait for the last transaction to complete */
499 udelay(2);
500
501 status = (status == D64_XS0_XS_DISABLED);
502 } else {
503 /*
504 * PR2414 WAR: DMA engines are not disabled until
505 * transfer finishes
506 */
507 writel(0, GMAC0_DMA_RX_CTRL_ADDR);
508 SPINWAIT(((status = (readl(GMAC0_DMA_RX_STATUS0_ADDR) &
509 D64_RS0_RS_MASK)) !=
510 D64_RS0_RS_DISABLED), 10000);
511
512 status = (status == D64_RS0_RS_DISABLED);
513 }
514
515 return status;
516}
517
518static int gmac_enable_dma(struct eth_dma *dma, int dir)
519{
520 uint32_t control;
521
522 debug("%s enter\n", __func__);
523
524 if (dir == MAC_DMA_TX) {
525 dma->cur_tx_index = 0;
526
527 /*
528 * These bits 20:18 (burstLen) of control register can be
529 * written but will take effect only if these bits are
530 * valid. So this will not affect previous versions
531 * of the DMA. They will continue to have those bits set to 0.
532 */
533 control = readl(GMAC0_DMA_TX_CTRL_ADDR);
534
535 control |= D64_XC_XE;
536 if ((g_dmactrlflags & DMA_CTRL_PEN) == 0)
537 control |= D64_XC_PD;
538
539 writel(control, GMAC0_DMA_TX_CTRL_ADDR);
540
541 /* initailize the DMA channel */
542 writel((uint32_t)(dma->tx_desc_aligned),
543 GMAC0_DMA_TX_ADDR_LOW_ADDR);
544 writel(0, GMAC0_DMA_TX_ADDR_HIGH_ADDR);
545 } else {
546 dma->cur_rx_index = 0;
547
548 control = (readl(GMAC0_DMA_RX_CTRL_ADDR) &
549 D64_RC_AE) | D64_RC_RE;
550
551 if ((g_dmactrlflags & DMA_CTRL_PEN) == 0)
552 control |= D64_RC_PD;
553
554 if (g_dmactrlflags & DMA_CTRL_ROC)
555 control |= D64_RC_OC;
556
557 /*
558 * These bits 20:18 (burstLen) of control register can be
559 * written but will take effect only if these bits are
560 * valid. So this will not affect previous versions
561 * of the DMA. They will continue to have those bits set to 0.
562 */
563 control &= ~D64_RC_BL_MASK;
564 /* Keep default Rx burstlen */
565 control |= readl(GMAC0_DMA_RX_CTRL_ADDR) & D64_RC_BL_MASK;
566 control |= HWRXOFF << D64_RC_RO_SHIFT;
567
568 writel(control, GMAC0_DMA_RX_CTRL_ADDR);
569
570 /*
571 * the rx descriptor ring should have
572 * the addresses set properly;
573 * set the lastdscr for the rx ring
574 */
575 writel(((uint32_t)(dma->rx_desc_aligned) +
576 (RX_BUF_NUM - 1) * RX_BUF_SIZE) &
577 D64_XP_LD_MASK, GMAC0_DMA_RX_PTR_ADDR);
578 }
579
580 return 0;
581}
582
583bool gmac_mii_busywait(unsigned int timeout)
584{
585 uint32_t tmp = 0;
586
587 while (timeout > 10) {
588 tmp = readl(GMAC_MII_CTRL_ADDR);
589 if (tmp & (1 << GMAC_MII_BUSY_SHIFT)) {
590 udelay(10);
591 timeout -= 10;
592 } else {
593 break;
594 }
595 }
596 return tmp & (1 << GMAC_MII_BUSY_SHIFT);
597}
598
599int gmac_miiphy_read(const char *devname, unsigned char phyaddr,
600 unsigned char reg, unsigned short *value)
601{
602 uint32_t tmp = 0;
603
604 (void)devname;
605
606 /* Busy wait timeout is 1ms */
607 if (gmac_mii_busywait(1000)) {
608 error("%s: Prepare MII read: MII/MDIO busy\n", __func__);
609 return -1;
610 }
611
612 /* Read operation */
613 tmp = GMAC_MII_DATA_READ_CMD;
614 tmp |= (phyaddr << GMAC_MII_PHY_ADDR_SHIFT) |
615 (reg << GMAC_MII_PHY_REG_SHIFT);
616 debug("MII read cmd 0x%x, phy 0x%x, reg 0x%x\n", tmp, phyaddr, reg);
617 writel(tmp, GMAC_MII_DATA_ADDR);
618
619 if (gmac_mii_busywait(1000)) {
620 error("%s: MII read failure: MII/MDIO busy\n", __func__);
621 return -1;
622 }
623
624 *value = readl(GMAC_MII_DATA_ADDR) & 0xffff;
625 debug("MII read data 0x%x\n", *value);
626 return 0;
627}
628
629int gmac_miiphy_write(const char *devname, unsigned char phyaddr,
630 unsigned char reg, unsigned short value)
631{
632 uint32_t tmp = 0;
633
634 (void)devname;
635
636 /* Busy wait timeout is 1ms */
637 if (gmac_mii_busywait(1000)) {
638 error("%s: Prepare MII write: MII/MDIO busy\n", __func__);
639 return -1;
640 }
641
642 /* Write operation */
643 tmp = GMAC_MII_DATA_WRITE_CMD | (value & 0xffff);
644 tmp |= ((phyaddr << GMAC_MII_PHY_ADDR_SHIFT) |
645 (reg << GMAC_MII_PHY_REG_SHIFT));
646 debug("MII write cmd 0x%x, phy 0x%x, reg 0x%x, data 0x%x\n",
647 tmp, phyaddr, reg, value);
648 writel(tmp, GMAC_MII_DATA_ADDR);
649
650 if (gmac_mii_busywait(1000)) {
651 error("%s: MII write failure: MII/MDIO busy\n", __func__);
652 return -1;
653 }
654
655 return 0;
656}
657
658void gmac_init_reset(void)
659{
660 debug("%s enter\n", __func__);
661
662 /* set command config reg CC_SR */
663 reg32_set_bits(UNIMAC0_CMD_CFG_ADDR, CC_SR);
664 udelay(GMAC_RESET_DELAY);
665}
666
667void gmac_clear_reset(void)
668{
669 debug("%s enter\n", __func__);
670
671 /* clear command config reg CC_SR */
672 reg32_clear_bits(UNIMAC0_CMD_CFG_ADDR, CC_SR);
673 udelay(GMAC_RESET_DELAY);
674}
675
676static void gmac_enable_local(bool en)
677{
678 uint32_t cmdcfg;
679
680 debug("%s enter\n", __func__);
681
682 /* read command config reg */
683 cmdcfg = readl(UNIMAC0_CMD_CFG_ADDR);
684
685 /* put mac in reset */
686 gmac_init_reset();
687
688 cmdcfg |= CC_SR;
689
690 /* first deassert rx_ena and tx_ena while in reset */
691 cmdcfg &= ~(CC_RE | CC_TE);
692 /* write command config reg */
693 writel(cmdcfg, UNIMAC0_CMD_CFG_ADDR);
694
695 /* bring mac out of reset */
696 gmac_clear_reset();
697
698 /* if not enable exit now */
699 if (!en)
700 return;
701
702 /* enable the mac transmit and receive paths now */
703 udelay(2);
704 cmdcfg &= ~CC_SR;
705 cmdcfg |= (CC_RE | CC_TE);
706
707 /* assert rx_ena and tx_ena when out of reset to enable the mac */
708 writel(cmdcfg, UNIMAC0_CMD_CFG_ADDR);
709
710 return;
711}
712
713int gmac_enable(void)
714{
715 gmac_enable_local(1);
716
717 /* clear interrupts */
718 writel(I_INTMASK, GMAC0_INT_STATUS_ADDR);
719 return 0;
720}
721
722int gmac_disable(void)
723{
724 gmac_enable_local(0);
725 return 0;
726}
727
728int gmac_set_speed(int speed, int duplex)
729{
730 uint32_t cmdcfg;
731 uint32_t hd_ena;
732 uint32_t speed_cfg;
733
734 hd_ena = duplex ? 0 : CC_HD;
735 if (speed == 1000) {
736 speed_cfg = 2;
737 } else if (speed == 100) {
738 speed_cfg = 1;
739 } else if (speed == 10) {
740 speed_cfg = 0;
741 } else {
742 error("%s: Invalid GMAC speed(%d)!\n", __func__, speed);
743 return -1;
744 }
745
746 cmdcfg = readl(UNIMAC0_CMD_CFG_ADDR);
747 cmdcfg &= ~(CC_ES_MASK | CC_HD);
748 cmdcfg |= ((speed_cfg << CC_ES_SHIFT) | hd_ena);
749
750 printf("Change GMAC speed to %dMB\n", speed);
751 debug("GMAC speed cfg 0x%x\n", cmdcfg);
752 writel(cmdcfg, UNIMAC0_CMD_CFG_ADDR);
753
754 return 0;
755}
756
757int gmac_set_mac_addr(unsigned char *mac)
758{
759 /* set our local address */
760 debug("GMAC: %02x:%02x:%02x:%02x:%02x:%02x\n",
761 mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
762 writel(htonl(*(uint32_t *)mac), UNIMAC0_MAC_MSB_ADDR);
763 writew(htons(*(uint32_t *)&mac[4]), UNIMAC0_MAC_LSB_ADDR);
764
765 return 0;
766}
767
768int gmac_mac_init(struct eth_device *dev)
769{
770 struct eth_info *eth = (struct eth_info *)(dev->priv);
771 struct eth_dma *dma = &(eth->dma);
772
773 uint32_t tmp;
774 uint32_t cmdcfg;
775 int chipid;
776
777 debug("%s enter\n", __func__);
778
779 /* Always use GMAC0 */
780 printf("Using GMAC%d\n", 0);
781
782 /* Reset AMAC0 core */
783 writel(0, AMAC0_IDM_RESET_ADDR);
784 tmp = readl(AMAC0_IO_CTRL_DIRECT_ADDR);
785 /* Set clock */
786 tmp &= ~(1 << AMAC0_IO_CTRL_CLK_250_SEL_SHIFT);
787 tmp |= (1 << AMAC0_IO_CTRL_GMII_MODE_SHIFT);
788 /* Set Tx clock */
789 tmp &= ~(1 << AMAC0_IO_CTRL_DEST_SYNC_MODE_EN_SHIFT);
790 writel(tmp, AMAC0_IO_CTRL_DIRECT_ADDR);
791
792 /* reset gmac */
793 /*
794 * As AMAC is just reset, NO need?
795 * set eth_data into loopback mode to ensure no rx traffic
796 * gmac_loopback(eth_data, TRUE);
797 * ET_TRACE(("%s gmac loopback\n", __func__));
798 * udelay(1);
799 */
800
801 cmdcfg = readl(UNIMAC0_CMD_CFG_ADDR);
802 cmdcfg &= ~(CC_TE | CC_RE | CC_RPI | CC_TAI | CC_HD | CC_ML |
803 CC_CFE | CC_RL | CC_RED | CC_PE | CC_TPI |
804 CC_PAD_EN | CC_PF);
805 cmdcfg |= (CC_PROM | CC_NLC | CC_CFE);
806 /* put mac in reset */
807 gmac_init_reset();
808 writel(cmdcfg, UNIMAC0_CMD_CFG_ADDR);
809 gmac_clear_reset();
810
811 /* enable clear MIB on read */
812 reg32_set_bits(GMAC0_DEV_CTRL_ADDR, DC_MROR);
813 /* PHY: set smi_master to drive mdc_clk */
814 reg32_set_bits(GMAC0_PHY_CTRL_ADDR, PC_MTE);
815
816 /* clear persistent sw intstatus */
817 writel(0, GMAC0_INT_STATUS_ADDR);
818
819 if (dma_init(dma) < 0) {
820 error("%s: GMAC dma_init failed\n", __func__);
821 goto err_exit;
822 }
823
824 chipid = CHIPID;
825 printf("%s: Chip ID: 0x%x\n", __func__, chipid);
826
827 /* set switch bypass mode */
828 tmp = readl(SWITCH_GLOBAL_CONFIG_ADDR);
829 tmp |= (1 << CDRU_SWITCH_BYPASS_SWITCH_SHIFT);
830
831 /* Switch mode */
832 /* tmp &= ~(1 << CDRU_SWITCH_BYPASS_SWITCH_SHIFT); */
833
834 writel(tmp, SWITCH_GLOBAL_CONFIG_ADDR);
835
836 tmp = readl(CRMU_CHIP_IO_PAD_CONTROL_ADDR);
837 tmp &= ~(1 << CDRU_IOMUX_FORCE_PAD_IN_SHIFT);
838 writel(tmp, CRMU_CHIP_IO_PAD_CONTROL_ADDR);
839
840 /* Set MDIO to internal GPHY */
841 tmp = readl(GMAC_MII_CTRL_ADDR);
842 /* Select internal MDC/MDIO bus*/
843 tmp &= ~(1 << GMAC_MII_CTRL_BYP_SHIFT);
844 /* select MDC/MDIO connecting to on-chip internal PHYs */
845 tmp &= ~(1 << GMAC_MII_CTRL_EXT_SHIFT);
846 /*
847 * give bit[6:0](MDCDIV) with required divisor to set
848 * the MDC clock frequency, 66MHZ/0x1A=2.5MHZ
849 */
850 tmp |= 0x1A;
851
852 writel(tmp, GMAC_MII_CTRL_ADDR);
853
854 if (gmac_mii_busywait(1000)) {
855 error("%s: Configure MDIO: MII/MDIO busy\n", __func__);
856 goto err_exit;
857 }
858
859 /* Configure GMAC0 */
860 /* enable one rx interrupt per received frame */
861 writel(1 << GMAC0_IRL_FRAMECOUNT_SHIFT, GMAC0_INTR_RECV_LAZY_ADDR);
862
863 /* read command config reg */
864 cmdcfg = readl(UNIMAC0_CMD_CFG_ADDR);
865 /* enable 802.3x tx flow control (honor received PAUSE frames) */
866 cmdcfg &= ~CC_RPI;
867 /* enable promiscuous mode */
868 cmdcfg |= CC_PROM;
869 /* Disable loopback mode */
870 cmdcfg &= ~CC_ML;
871 /* set the speed */
872 cmdcfg &= ~(CC_ES_MASK | CC_HD);
873 /* Set to 1Gbps and full duplex by default */
874 cmdcfg |= (2 << CC_ES_SHIFT);
875
876 /* put mac in reset */
877 gmac_init_reset();
878 /* write register */
879 writel(cmdcfg, UNIMAC0_CMD_CFG_ADDR);
880 /* bring mac out of reset */
881 gmac_clear_reset();
882
883 /* set max frame lengths; account for possible vlan tag */
884 writel(PKTSIZE + 32, UNIMAC0_FRM_LENGTH_ADDR);
885
886 return 0;
887
888err_exit:
889 dma_deinit(dma);
890 return -1;
891}
892
893int gmac_add(struct eth_device *dev)
894{
895 struct eth_info *eth = (struct eth_info *)(dev->priv);
896 struct eth_dma *dma = &(eth->dma);
897 void *tmp;
898
899 /*
900 * Desc has to be 16-byte aligned ?
901 * If it is 8-byte aligned by malloc, fail Tx
902 */
903 tmp = malloc(sizeof(dma64dd_t) * TX_BUF_NUM + 8);
904 if (tmp == NULL) {
905 printf("%s: Failed to allocate TX desc Buffer\n", __func__);
906 return -1;
907 }
908
909 dma->tx_desc = (void *)tmp;
910 dma->tx_desc_aligned = (void *)(((uint32_t)tmp) & (~0xf));
911 debug("TX Descriptor Buffer: %p; length: 0x%x\n",
912 dma->tx_desc_aligned, sizeof(dma64dd_t) * TX_BUF_NUM);
913
914 tmp = malloc(TX_BUF_SIZE * TX_BUF_NUM);
915 if (tmp == NULL) {
916 printf("%s: Failed to allocate TX Data Buffer\n", __func__);
917 free(dma->tx_desc);
918 return -1;
919 }
920 dma->tx_buf = (uint8_t *)tmp;
921 debug("TX Data Buffer: %p; length: 0x%x\n",
922 dma->tx_buf, TX_BUF_SIZE * TX_BUF_NUM);
923
924 /* Desc has to be 16-byte aligned ? */
925 tmp = malloc(sizeof(dma64dd_t) * RX_BUF_NUM + 8);
926 if (tmp == NULL) {
927 printf("%s: Failed to allocate RX Descriptor\n", __func__);
928 free(dma->tx_desc);
929 free(dma->tx_buf);
930 return -1;
931 }
932 dma->rx_desc = tmp;
933 dma->rx_desc_aligned = (void *)(((uint32_t)tmp) & (~0xf));
934 debug("RX Descriptor Buffer: %p, length: 0x%x\n",
935 dma->rx_desc_aligned, sizeof(dma64dd_t) * RX_BUF_NUM);
936
937 tmp = malloc(RX_BUF_SIZE * RX_BUF_NUM);
938 if (tmp == NULL) {
939 printf("%s: Failed to allocate RX Data Buffer\n", __func__);
940 free(dma->tx_desc);
941 free(dma->tx_buf);
942 free(dma->rx_desc);
943 return -1;
944 }
945 dma->rx_buf = tmp;
946 debug("RX Data Buffer: %p; length: 0x%x\n",
947 dma->rx_buf, RX_BUF_SIZE * RX_BUF_NUM);
948
949 g_dmactrlflags = 0;
950
951 eth->phy_interface = PHY_INTERFACE_MODE_GMII;
952
953 dma->tx_packet = gmac_tx_packet;
954 dma->check_tx_done = gmac_check_tx_done;
955
956 dma->check_rx_done = gmac_check_rx_done;
957
958 dma->enable_dma = gmac_enable_dma;
959 dma->disable_dma = gmac_disable_dma;
960
961 eth->miiphy_read = gmac_miiphy_read;
962 eth->miiphy_write = gmac_miiphy_write;
963
964 eth->mac_init = gmac_mac_init;
965 eth->disable_mac = gmac_disable;
966 eth->enable_mac = gmac_enable;
967 eth->set_mac_addr = gmac_set_mac_addr;
968 eth->set_mac_speed = gmac_set_speed;
969
970 return 0;
971}