Peng Fan | fa2f20d | 2017-02-22 16:21:54 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2015-2016 Freescale Semiconductor, Inc. |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 as |
| 6 | * published by the Free Software Foundation. |
| 7 | */ |
| 8 | |
| 9 | #include <dt-bindings/clock/imx7ulp-clock.h> |
| 10 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 11 | #include <dt-bindings/gpio/gpio.h> |
| 12 | #include "skeleton.dtsi" |
| 13 | #include "imx7ulp-pinfunc.h" |
| 14 | |
| 15 | / { |
| 16 | interrupt-parent = <&intc>; |
| 17 | |
| 18 | aliases { |
| 19 | gpio0 = &gpio0; |
| 20 | gpio1 = &gpio1; |
| 21 | gpio2 = &gpio2; |
| 22 | gpio3 = &gpio3; |
| 23 | mmc0 = &usdhc0; |
| 24 | mmc1 = &usdhc1; |
| 25 | serial0 = &lpuart4; |
| 26 | serial1 = &lpuart5; |
| 27 | serial2 = &lpuart6; |
| 28 | serial3 = &lpuart7; |
| 29 | usbphy0 = &usbphy1; |
| 30 | i2c0 = &lpi2c4; |
| 31 | i2c1 = &lpi2c5; |
| 32 | i2c2 = &lpi2c6; |
| 33 | i2c3 = &lpi2c7; |
| 34 | }; |
| 35 | |
| 36 | cpus { |
| 37 | #address-cells = <1>; |
| 38 | #size-cells = <0>; |
| 39 | |
| 40 | cpu0: cpu@0 { |
| 41 | compatible = "arm,cortex-a7"; |
| 42 | device_type = "cpu"; |
| 43 | reg = <0>; |
| 44 | }; |
| 45 | }; |
| 46 | |
| 47 | reserved-memory { |
| 48 | #address-cells = <1>; |
| 49 | #size-cells = <1>; |
| 50 | ranges; |
| 51 | |
| 52 | /* global autoconfigured region for contiguous allocations */ |
| 53 | linux,cma { |
| 54 | compatible = "shared-dma-pool"; |
| 55 | reusable; |
| 56 | size = <0xC000000>; |
| 57 | alignment = <0x2000>; |
| 58 | linux,cma-default; |
| 59 | }; |
| 60 | |
| 61 | rpmsg_reserved: rpmsg@9FFF0000 { |
| 62 | no-map; |
| 63 | reg = <0x9FF00000 0x100000>; |
| 64 | }; |
| 65 | |
| 66 | }; |
| 67 | |
| 68 | intc: interrupt-controller@40021000 { |
| 69 | compatible = "arm,cortex-a7-gic"; |
| 70 | #interrupt-cells = <3>; |
| 71 | interrupt-controller; |
| 72 | reg = <0x40021000 0x1000>, |
| 73 | <0x40022000 0x100>; |
| 74 | }; |
| 75 | |
| 76 | clocks { |
| 77 | #address-cells = <1>; |
| 78 | #size-cells = <0>; |
| 79 | |
| 80 | ckil: clock@0 { |
| 81 | compatible = "fixed-clock"; |
| 82 | #clock-cells = <0>; |
| 83 | clock-frequency = <32768>; |
| 84 | clock-output-names = "ckil"; |
| 85 | }; |
| 86 | |
| 87 | osc: clock@1 { |
| 88 | compatible = "fixed-clock"; |
| 89 | #clock-cells = <0>; |
| 90 | clock-frequency = <24000000>; |
| 91 | clock-output-names = "osc"; |
| 92 | }; |
| 93 | |
| 94 | sirc: clock@2 { |
| 95 | compatible = "fixed-clock"; |
| 96 | #clock-cells = <0>; |
| 97 | clock-frequency = <16000000>; |
| 98 | clock-output-names = "sirc"; |
| 99 | }; |
| 100 | |
| 101 | firc: clock@3 { |
| 102 | compatible = "fixed-clock"; |
| 103 | #clock-cells = <0>; |
| 104 | clock-frequency = <48000000>; |
| 105 | clock-output-names = "firc"; |
| 106 | }; |
| 107 | |
| 108 | upll: clock@4 { |
| 109 | compatible = "fixed-clock"; |
| 110 | #clock-cells = <0>; |
| 111 | clock-frequency = <480000000>; |
| 112 | clock-output-names = "upll"; |
| 113 | }; |
| 114 | |
| 115 | mpll: clock@5 { |
| 116 | compatible = "fixed-clock"; |
| 117 | #clock-cells = <0>; |
| 118 | clock-frequency = <480000000>; |
| 119 | clock-output-names = "mpll"; |
| 120 | }; |
| 121 | }; |
| 122 | |
| 123 | sram: sram@20000000 { |
| 124 | compatible = "fsl,lpm-sram"; |
| 125 | reg = <0x1fffc000 0x4000>; |
| 126 | }; |
| 127 | |
| 128 | ahbbridge0: ahb-bridge0@40000000 { |
| 129 | compatible = "fsl,aips-bus", "simple-bus"; |
| 130 | #address-cells = <1>; |
| 131 | #size-cells = <1>; |
| 132 | reg = <0x40000000 0x800000>; |
| 133 | ranges; |
| 134 | |
| 135 | edma0: dma-controller@40080000 { |
| 136 | #dma-cells = <2>; |
| 137 | compatible = "nxp,imx7ulp-edma"; |
| 138 | reg = <0x40080000 0x2000>, |
| 139 | <0x40210000 0x1000>; |
| 140 | dma-channels = <32>; |
| 141 | interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| 142 | <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, |
| 143 | <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, |
| 144 | <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| 145 | <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| 146 | <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| 147 | <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| 148 | <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| 149 | <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 150 | <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| 151 | <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| 152 | <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| 153 | <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| 154 | <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| 155 | <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| 156 | <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, |
| 157 | <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| 158 | clock-names = "dma", "dmamux0"; |
| 159 | clocks = <&clks IMX7ULP_CLK_DMA1>, <&clks IMX7ULP_CLK_DMA_MUX1>; |
| 160 | }; |
| 161 | |
| 162 | mu: mu@40220000 { |
| 163 | compatible = "fsl,imx7ulp-mu", "fsl,imx6sx-mu"; |
| 164 | reg = <0x40220000 0x1000>; |
| 165 | interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| 166 | <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| 167 | status = "okay"; |
| 168 | }; |
| 169 | |
| 170 | nmi: nmi@40220000 { |
| 171 | compatible = "fsl,imx7ulp-nmi"; |
| 172 | reg = <0x40220000 0x1000>; |
| 173 | interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| 174 | status = "okay"; |
| 175 | }; |
| 176 | |
| 177 | rpmsg: rpmsg{ |
| 178 | compatible = "fsl,imx7ulp-rpmsg"; |
| 179 | memory-region = <&rpmsg_reserved>; |
| 180 | status = "disabled"; |
| 181 | }; |
| 182 | |
| 183 | snvs: snvs@40230000 { |
| 184 | compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; |
| 185 | reg = <0x40230000 0x10000>; |
| 186 | |
| 187 | snvs_rtc: snvs-rtc-lp{ |
| 188 | compatible = "fsl,sec-v4.0-mon-rtc-lp"; |
| 189 | regmap =<&snvs>; |
| 190 | offset = <0x34>; |
| 191 | interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| 192 | clock-names = "snvs-rtc"; |
| 193 | clocks = <&clks IMX7ULP_CLK_SNVS>; |
| 194 | }; |
| 195 | }; |
| 196 | |
| 197 | tpm5: tpm@40260000 { |
| 198 | compatible = "fsl,imx7ulp-tpm"; |
| 199 | reg = <0x40260000 0x1000>; |
| 200 | interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| 201 | clocks = <&clks IMX7ULP_CLK_LPTPM5>; |
| 202 | }; |
| 203 | |
| 204 | lpit: 1@40270000 { |
| 205 | compatible = "fsl,imx-lpit"; |
| 206 | reg = <0x40270000 0x1000>; |
| 207 | interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 208 | /* clocks = <&lpclk>;*/ |
| 209 | clocks = <&clks IMX7ULP_CLK_LPIT1>; |
| 210 | assigned-clock-rates = <48000000>; |
| 211 | assigned-clocks = <&clks IMX7ULP_CLK_LPIT1>; |
| 212 | assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>; |
| 213 | }; |
| 214 | |
| 215 | lpi2c4: lpi2c4@402B0000 { |
| 216 | compatible = "fsl,imx7ulp-lpi2c"; |
| 217 | reg = <0x402B0000 0x10000>; |
| 218 | interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 219 | clocks = <&clks IMX7ULP_CLK_LPI2C4>; |
| 220 | clock-names = "ipg"; |
| 221 | assigned-clocks = <&clks IMX7ULP_CLK_LPI2C4>; |
| 222 | assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>; |
| 223 | assigned-clock-rates = <48000000>; |
| 224 | status = "disabled"; |
| 225 | }; |
| 226 | |
| 227 | lpi2c5: lpi2c4@402C0000 { |
| 228 | compatible = "fsl,imx7ulp-lpi2c"; |
| 229 | reg = <0x402C0000 0x10000>; |
| 230 | interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 231 | clocks = <&clks IMX7ULP_CLK_LPI2C5>; |
| 232 | clock-names = "ipg"; |
| 233 | assigned-clocks = <&clks IMX7ULP_CLK_LPI2C5>; |
| 234 | assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>; |
| 235 | assigned-clock-rates = <48000000>; |
| 236 | status = "disabled"; |
| 237 | }; |
| 238 | |
| 239 | lpspi2: lpspi@40290000 { |
| 240 | compatible = "fsl,imx7ulp-spi"; |
| 241 | reg = <0x40290000 0x10000>; |
| 242 | interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 243 | clocks = <&clks IMX7ULP_CLK_LPSPI2>; |
| 244 | clock-names = "ipg"; |
| 245 | assigned-clocks = <&clks IMX7ULP_CLK_LPSPI2>; |
| 246 | assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>; |
| 247 | assigned-clock-rates = <48000000>; |
| 248 | status = "disabled"; |
| 249 | }; |
| 250 | |
| 251 | lpspi3: lpspi@402A0000 { |
| 252 | compatible = "fsl,imx7ulp-spi"; |
| 253 | reg = <0x402A0000 0x10000>; |
| 254 | interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 255 | clocks = <&clks IMX7ULP_CLK_LPSPI3>; |
| 256 | clock-names = "ipg"; |
| 257 | assigned-clocks = <&clks IMX7ULP_CLK_LPSPI3>; |
| 258 | assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>; |
| 259 | assigned-clock-rates = <48000000>; |
| 260 | status = "disabled"; |
| 261 | }; |
| 262 | |
| 263 | lpuart4: serial@402D0000 { |
| 264 | compatible = "fsl,imx7ulp-lpuart"; |
| 265 | reg = <0x402D0000 0x1000>; |
| 266 | interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| 267 | clocks = <&clks IMX7ULP_CLK_LPUART4>; |
| 268 | clock-names = "ipg"; |
| 269 | assigned-clocks = <&clks IMX7ULP_CLK_LPUART4>; |
| 270 | assigned-clock-parents = <&clks IMX7ULP_CLK_OSC>; |
| 271 | assigned-clock-rates = <24000000>; |
| 272 | status = "disabled"; |
| 273 | }; |
| 274 | |
| 275 | lpuart5: serial@402E0000 { |
| 276 | compatible = "fsl,imx7ulp-lpuart"; |
| 277 | reg = <0x402E0000 0x1000>; |
| 278 | interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| 279 | clocks = <&clks IMX7ULP_CLK_LPUART5>; |
| 280 | clock-names = "ipg"; |
| 281 | assigned-clocks = <&clks IMX7ULP_CLK_LPUART5>; |
| 282 | assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>; |
| 283 | assigned-clock-rates = <48000000>; |
| 284 | dmas = <&edma0 0 20>, <&edma0 0 19>; |
| 285 | dma-names = "tx","rx"; |
| 286 | status = "disabled"; |
| 287 | }; |
| 288 | |
| 289 | usbotg1: usb@40330000 { |
| 290 | compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", |
| 291 | "fsl,imx27-usb"; |
| 292 | reg = <0x40330000 0x200>; |
| 293 | interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| 294 | clocks = <&clks IMX7ULP_CLK_USB0>; |
| 295 | fsl,usbphy = <&usbphy1>; |
| 296 | fsl,usbmisc = <&usbmisc1 0>; |
| 297 | ahb-burst-config = <0x0>; |
| 298 | tx-burst-size-dword = <0x8>; |
| 299 | rx-burst-size-dword = <0x8>; |
| 300 | status = "disabled"; |
| 301 | }; |
| 302 | |
| 303 | usbmisc1: usbmisc@40330200 { |
| 304 | #index-cells = <1>; |
| 305 | compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", |
| 306 | "fsl,imx6q-usbmisc"; |
| 307 | reg = <0x40330200 0x200>; |
| 308 | }; |
| 309 | |
| 310 | usbphy1: usbphy@0x40350000 { |
| 311 | compatible = "fsl,imx7ulp-usbphy", |
| 312 | "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; |
| 313 | reg = <0x40350000 0x1000>; |
| 314 | interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 315 | clocks = <&clks IMX7ULP_CLK_USB_PHY>; |
| 316 | nxp,sim = <&sim>; |
| 317 | }; |
| 318 | |
| 319 | usdhc0: usdhc@40370000 { |
| 320 | compatible = "fsl,imx7ulp-usdhc"; |
| 321 | reg = <0x40370000 0x10000>; |
| 322 | interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 323 | clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>, |
| 324 | <&clks IMX7ULP_CLK_NIC1_DIV>, |
| 325 | <&clks IMX7ULP_CLK_USDHC0>; |
| 326 | clock-names ="ipg", "ahb", "per"; |
| 327 | bus-width = <4>; |
| 328 | fsl,tuning-start-tap = <20>; |
| 329 | fsl,tuning-step= <2>; |
| 330 | status = "disabled"; |
| 331 | }; |
| 332 | |
| 333 | usdhc1: usdhc@40380000 { |
| 334 | compatible = "fsl,imx7ulp-usdhc"; |
| 335 | reg = <0x40380000 0x10000>; |
| 336 | interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 337 | clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>, |
| 338 | <&clks IMX7ULP_CLK_NIC1_DIV>, |
| 339 | <&clks IMX7ULP_CLK_USDHC1>; |
| 340 | clock-names ="ipg", "ahb", "per"; |
| 341 | bus-width = <4>; |
| 342 | fsl,tuning-start-tap = <20>; |
| 343 | fsl,tuning-step= <2>; |
| 344 | status = "disabled"; |
| 345 | }; |
| 346 | |
| 347 | wdog1: wdog@403D0000 { |
| 348 | compatible = "fsl,imx7ulp-wdt"; |
| 349 | reg = <0x403D0000 0x10000>; |
| 350 | interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| 351 | clocks = <&clks IMX7ULP_CLK_WDG1>; |
| 352 | assigned-clocks = <&clks IMX7ULP_CLK_WDG1>; |
| 353 | assigned-clocks-parents = <&clks IMX7ULP_CLK_FIRC>; |
| 354 | /* |
| 355 | * As the 1KHz LPO clock rate is not trimed,the actually clock |
| 356 | * is about 667Hz, so the init timeout 60s should set 40*1000 |
| 357 | * in the TOVAL register. |
| 358 | */ |
| 359 | timeout-sec = <40>; |
| 360 | }; |
| 361 | |
| 362 | wdog2: wdog@40430000 { |
| 363 | compatible = "fsl,imx7ulp-wdt"; |
| 364 | reg = <0x40430000 0x10000>; |
| 365 | interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| 366 | clocks = <&clks IMX7ULP_CLK_WDG2>; |
| 367 | assigned-clocks = <&clks IMX7ULP_CLK_WDG2>; |
| 368 | assigned-clocks-parents = <&clks IMX7ULP_CLK_FIRC>; |
| 369 | timeout-sec = <40>; |
| 370 | }; |
| 371 | |
| 372 | clks: scg1@403E0000 { |
| 373 | compatible = "fsl,imx7ulp-scg1"; |
| 374 | reg = <0x403E0000 0x10000>; |
| 375 | clocks = <&ckil>, <&osc>, <&sirc>, |
| 376 | <&firc>, <&upll>, <&mpll>; |
| 377 | clock-names = "ckil", "osc", "sirc", |
| 378 | "firc", "upll", "mpll"; |
| 379 | #clock-cells = <1>; |
| 380 | assigned-clocks = <&clks IMX7ULP_CLK_LPTPM5>, |
| 381 | <&clks IMX7ULP_CLK_USDHC1>; |
| 382 | assigned-clock-parents = <&clks IMX7ULP_CLK_OSC>, |
| 383 | <&clks IMX7ULP_CLK_NIC1_DIV>; |
| 384 | }; |
| 385 | |
| 386 | pcc2: pcc2@403F0000 { |
| 387 | compatible = "fsl,imx7ulp-pcc2"; |
| 388 | reg = <0x403F0000 0x10000>; |
| 389 | }; |
| 390 | |
| 391 | pmc1: pmc1@40400000 { |
| 392 | compatible = "fsl,imx7ulp-pmc1"; |
| 393 | reg = <0x40400000 0x1000>; |
| 394 | }; |
| 395 | |
| 396 | smc1: smc1@40410000 { |
| 397 | compatible = "fsl,imx7ulp-smc1"; |
| 398 | reg = <0x40410000 0x1000>; |
| 399 | }; |
| 400 | |
| 401 | }; |
| 402 | |
| 403 | ahbbridge1: ahb-bridge1@40800000 { |
| 404 | compatible = "fsl,aips-bus", "simple-bus"; |
| 405 | #address-cells = <1>; |
| 406 | #size-cells = <1>; |
| 407 | reg = <0x40800000 0x800000>; |
| 408 | ranges; |
| 409 | |
| 410 | lpi2c6: lpi2c6@40A40000 { |
| 411 | compatible = "fsl,imx7ulp-lpi2c"; |
| 412 | reg = <0x40A40000 0x10000>; |
| 413 | interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 414 | clocks = <&clks IMX7ULP_CLK_LPI2C6>; |
| 415 | clock-names = "ipg"; |
| 416 | assigned-clocks = <&clks IMX7ULP_CLK_LPI2C6>; |
| 417 | assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>; |
| 418 | assigned-clock-rates = <48000000>; |
| 419 | status = "disabled"; |
| 420 | }; |
| 421 | |
| 422 | lpi2c7: lpi2c7@40A50000 { |
| 423 | compatible = "fsl,imx7ulp-lpi2c"; |
| 424 | reg = <0x40A50000 0x10000>; |
| 425 | interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 426 | clocks = <&clks IMX7ULP_CLK_LPI2C7>; |
| 427 | clock-names = "ipg"; |
| 428 | assigned-clocks = <&clks IMX7ULP_CLK_LPI2C7>; |
| 429 | assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>; |
| 430 | assigned-clock-rates = <48000000>; |
| 431 | status = "disabled"; |
| 432 | }; |
| 433 | |
| 434 | lpuart6: serial@40A60000 { |
| 435 | compatible = "fsl,imx7ulp-lpuart"; |
| 436 | reg = <0x40A60000 0x1000>; |
| 437 | interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 438 | clocks = <&clks IMX7ULP_CLK_LPUART6>; |
| 439 | clock-names = "ipg"; |
| 440 | assigned-clocks = <&clks IMX7ULP_CLK_LPUART6>; |
| 441 | assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>; |
| 442 | assigned-clock-rates = <48000000>; |
| 443 | dmas = <&edma0 0 22>, <&edma0 0 21>; |
| 444 | dma-names = "tx","rx"; |
| 445 | status = "disabled"; |
| 446 | }; |
| 447 | |
| 448 | lpuart7: serial@40A70000 { |
| 449 | compatible = "fsl,imx7ulp-lpuart"; |
| 450 | reg = <0x40A70000 0x1000>; |
| 451 | interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 452 | clocks = <&clks IMX7ULP_CLK_LPUART7>; |
| 453 | clock-names = "ipg"; |
| 454 | assigned-clocks = <&clks IMX7ULP_CLK_LPUART7>; |
| 455 | assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>; |
| 456 | assigned-clock-rates = <50000000>; |
| 457 | dmas = <&edma0 0 24>, <&edma0 0 23>; |
| 458 | dma-names = "tx","rx"; |
| 459 | status = "disabled"; |
| 460 | }; |
| 461 | |
| 462 | lcdif: lcdif@40AA0000 { |
| 463 | compatible = "fsl,imx7ulp-lcdif"; |
| 464 | reg = <0x40aa0000 0x10000>; |
| 465 | interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| 466 | clocks = <&clks IMX7ULP_CLK_DUMMY>, |
| 467 | <&clks IMX7ULP_CLK_LCDIF>, |
| 468 | <&clks IMX7ULP_CLK_DUMMY>; |
| 469 | clock-names = "axi", "pix", "disp_axi"; |
| 470 | status = "disabled"; |
| 471 | }; |
| 472 | |
| 473 | mipi_dsi: mipi_dsi@40A90000 { |
| 474 | compatible = "fsl,imx7ulp-mipi-dsi"; |
| 475 | reg = <0x40A90000 0x10000>; |
| 476 | interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| 477 | clocks = <&clks IMX7ULP_CLK_DSI>; |
| 478 | clock-names = "mipi_dsi_clk"; |
| 479 | sim = <&sim>; |
| 480 | status = "disabled"; |
| 481 | }; |
| 482 | |
| 483 | mmdc: mmdc@40ab0000 { |
| 484 | compatible = "fsl,imx7ulp-mmdc"; |
| 485 | reg = <0x40ab0000 0x4000>; |
| 486 | }; |
| 487 | |
| 488 | pcc3: pcc3@40B30000 { |
| 489 | compatible = "fsl,imx7ulp-pcc3"; |
| 490 | reg = <0x40B30000 0x10000>; |
| 491 | }; |
| 492 | |
| 493 | iomuxc: iomuxc@4103D000 { |
| 494 | compatible = "fsl,imx7ulp-iomuxc-0"; |
| 495 | reg = <0x4103D000 0x1000>; |
| 496 | fsl,mux_mask = <0xf00>; |
| 497 | status = "disabled"; |
| 498 | }; |
| 499 | |
| 500 | iomuxc1: iomuxc1@40ac0000 { |
| 501 | compatible = "fsl,imx7ulp-iomuxc-1"; |
| 502 | reg = <0x40ac0000 0x1000>; |
| 503 | fsl,mux_mask = <0xf00>; |
| 504 | }; |
| 505 | |
| 506 | gpio0: gpio@40ae0000 { |
| 507 | compatible = "fsl,imx7ulp-gpio"; |
| 508 | reg = <0x40ae0000 0x1000 0x400F0000 0x40>; |
| 509 | gpio-controller; |
| 510 | #gpio-cells = <2>; |
| 511 | interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| 512 | interrupt-controller; |
| 513 | #interrupt-cells = <2>; |
| 514 | gpio-ranges = <&iomuxc1 0 0 32>; |
| 515 | }; |
| 516 | |
| 517 | gpio1: gpio@40af0000 { |
| 518 | compatible = "fsl,imx7ulp-gpio"; |
| 519 | reg = <0x40af0000 0x1000 0x400F0040 0x40>; |
| 520 | gpio-controller; |
| 521 | #gpio-cells = <2>; |
| 522 | interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| 523 | interrupt-controller; |
| 524 | #interrupt-cells = <2>; |
| 525 | gpio-ranges = <&iomuxc1 0 32 32>; |
| 526 | }; |
| 527 | |
| 528 | gpio2: gpio@40b00000 { |
| 529 | compatible = "fsl,imx7ulp-gpio"; |
| 530 | reg = <0x40b00000 0x1000 0x400F0080 0x40>; |
| 531 | gpio-controller; |
| 532 | #gpio-cells = <2>; |
| 533 | interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 534 | interrupt-controller; |
| 535 | #interrupt-cells = <2>; |
| 536 | gpio-ranges = <&iomuxc1 0 64 32>; |
| 537 | }; |
| 538 | |
| 539 | gpio3: gpio@40b10000 { |
| 540 | compatible = "fsl,imx7ulp-gpio"; |
| 541 | reg = <0x40b10000 0x1000 0x400F00c0 0x40>; |
| 542 | gpio-controller; |
| 543 | #gpio-cells = <2>; |
| 544 | interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| 545 | interrupt-controller; |
| 546 | #interrupt-cells = <2>; |
| 547 | gpio-ranges = <&iomuxc1 0 96 32>; |
| 548 | }; |
| 549 | |
| 550 | pmc0: pmc0@410a1000 { |
| 551 | compatible = "fsl,imx7ulp-pmc0"; |
| 552 | reg = <0x410a1000 0x1000>; |
| 553 | }; |
| 554 | |
| 555 | sim: sim@410a3000 { |
| 556 | compatible = "fsl,imx7ulp-sim", "syscon"; |
| 557 | reg = <0x410a3000 0x1000>; |
| 558 | }; |
| 559 | |
| 560 | qspi1: qspi@410A5000 { |
| 561 | #address-cells = <1>; |
| 562 | #size-cells = <0>; |
| 563 | compatible = "fsl,imx7ulp-qspi"; |
| 564 | reg = <0x410A5000 0x10000>, <0xC0000000 0x10000000>; |
| 565 | reg-names = "QuadSPI", "QuadSPI-memory"; |
| 566 | interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| 567 | clocks = <&clks IMX7ULP_CLK_DUMMY>, |
| 568 | <&clks IMX7ULP_CLK_DUMMY>; |
| 569 | clock-names = "qspi_en", "qspi"; |
| 570 | status = "disabled"; |
| 571 | }; |
| 572 | |
| 573 | gpu: gpu@41800000 { |
| 574 | compatible = "fsl,imx6q-gpu"; |
| 575 | reg = <0x41800000 0x80000>, <0x41880000 0x80000>, |
| 576 | <0x60000000 0x40000000>, <0x0 0x4000000>; |
| 577 | reg-names = "iobase_3d", "iobase_2d", |
| 578 | "phys_baseaddr", "contiguous_mem"; |
| 579 | interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, |
| 580 | <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| 581 | interrupt-names = "irq_3d", "irq_2d"; |
| 582 | clocks = <&clks IMX7ULP_CLK_GPU3D>, |
| 583 | <&clks IMX7ULP_CLK_NIC1_DIV>, |
| 584 | <&clks IMX7ULP_CLK_GPU_DIV>, |
| 585 | <&clks IMX7ULP_CLK_GPU2D>, |
| 586 | <&clks IMX7ULP_CLK_NIC1_DIV>, |
| 587 | <&clks IMX7ULP_CLK_NIC1_DIV>; |
| 588 | clock-names = "gpu3d_clk", "gpu3d_shader_clk", |
| 589 | "gpu3d_axi_clk", "gpu2d_clk", |
| 590 | "gpu2d_shader_clk", "gpu2d_axi_clk"; |
| 591 | }; |
| 592 | }; |
| 593 | |
| 594 | imx_ion { |
| 595 | compatible = "fsl,mxc-ion"; |
| 596 | fsl,heap-id = <0>; |
| 597 | }; |
| 598 | }; |