blob: 70fab4b0f4e43436e4befb6c2bb860c41bb5e3d8 [file] [log] [blame]
Dirk Behmead9bc8e2009-01-28 21:39:58 +01001/*
Sanjeev Premi741de262011-10-25 06:11:29 +00002 * Configuration settings for the TI OMAP3 EVM board.
3 *
4 * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/
5 *
Dirk Behmead9bc8e2009-01-28 21:39:58 +01006 * Author :
7 * Manikandan Pillai <mani.pillai@ti.com>
8 * Derived from Beagle Board and 3430 SDP code by
9 * Richard Woodruff <r-woodruff2@ti.com>
10 * Syed Mohammed Khasim <khasim@ti.com>
11 *
12 * Manikandan Pillai <mani.pillai@ti.com>
13 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +020014 * SPDX-License-Identifier: GPL-2.0+
Dirk Behmead9bc8e2009-01-28 21:39:58 +010015 */
16
Sanjeev Premi741de262011-10-25 06:11:29 +000017#ifndef __OMAP3EVM_CONFIG_H
18#define __OMAP3EVM_CONFIG_H
19
20#include <asm/arch/cpu.h>
Nishanth Menon987ec582015-03-09 17:12:04 -050021#include <asm/arch/omap.h>
Sanjeev Premi741de262011-10-25 06:11:29 +000022
Sanjeev Premi741de262011-10-25 06:11:29 +000023/* ----------------------------------------------------------------------------
24 * Supported U-boot commands
25 * ----------------------------------------------------------------------------
26 */
Tom Rini1ee6d312012-05-21 11:20:47 +000027#define CONFIG_CMD_ASKENV
28
Sanjeev Premi39708842011-10-25 06:11:30 +000029#define CONFIG_CMD_EXT2
30#define CONFIG_CMD_FAT
31#define CONFIG_CMD_JFFS2
Sanjeev Premi741de262011-10-25 06:11:29 +000032
Sanjeev Premi39708842011-10-25 06:11:30 +000033#define CONFIG_CMD_I2C
34#define CONFIG_CMD_MMC
35#define CONFIG_CMD_NAND
Sanjeev Premi741de262011-10-25 06:11:29 +000036#define CONFIG_CMD_DHCP
37#define CONFIG_CMD_PING
38
Sanjeev Premi741de262011-10-25 06:11:29 +000039/* ----------------------------------------------------------------------------
40 * Supported U-boot features
41 * ----------------------------------------------------------------------------
42 */
43#define CONFIG_SYS_LONGHELP
44#define CONFIG_SYS_HUSH_PARSER
45
46/* Display CPU and Board information */
47#define CONFIG_DISPLAY_CPUINFO
48#define CONFIG_DISPLAY_BOARDINFO
49
50/* Allow to overwrite serial and ethaddr */
51#define CONFIG_ENV_OVERWRITE
52
53/* Add auto-completion support */
54#define CONFIG_AUTO_COMPLETE
55
56/* ----------------------------------------------------------------------------
57 * Supported hardware
58 * ----------------------------------------------------------------------------
59 */
60
61/* MMC */
62#define CONFIG_MMC
63#define CONFIG_GENERIC_MMC
64#define CONFIG_OMAP_HSMMC
Tom Rini673283f2011-11-18 12:48:09 +000065
66/* SPL */
67#define CONFIG_SPL_MMC_SUPPORT
68#define CONFIG_SPL_FAT_SUPPORT
69#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
70#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
Paul Kocialkowskie2ccdf82014-11-08 23:14:55 +010071#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
Guillaume GARDET205b4f32014-10-15 17:53:11 +020072#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
Tom Rini673283f2011-11-18 12:48:09 +000073
74/* Partition tables */
Sanjeev Premi35e3f6d2011-11-16 10:20:50 -050075#define CONFIG_EFI_PARTITION
Tom Rini673283f2011-11-18 12:48:09 +000076#define CONFIG_DOS_PARTITION
Sanjeev Premi741de262011-10-25 06:11:29 +000077
78/* USB
79 *
80 * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
81 * Enable CONFIG_MUSB_UDD for Device functionalities.
82 */
83#define CONFIG_USB_OMAP3
84#define CONFIG_MUSB_HCD
85/* #define CONFIG_MUSB_UDC */
86
Tom Rini673283f2011-11-18 12:48:09 +000087/* NAND SPL */
88#define CONFIG_SPL_NAND_SIMPLE
89#define CONFIG_SPL_NAND_SUPPORT
Scott Wood6f2f01b2012-09-20 19:09:07 -050090#define CONFIG_SPL_NAND_BASE
91#define CONFIG_SPL_NAND_DRIVERS
92#define CONFIG_SPL_NAND_ECC
Tom Rini673283f2011-11-18 12:48:09 +000093#define CONFIG_SYS_NAND_5_ADDR_CYCLE
94#define CONFIG_SYS_NAND_PAGE_COUNT 64
95#define CONFIG_SYS_NAND_PAGE_SIZE 2048
96#define CONFIG_SYS_NAND_OOBSIZE 64
97#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
98#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
99#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
100 10, 11, 12, 13}
101#define CONFIG_SYS_NAND_ECCSIZE 512
102#define CONFIG_SYS_NAND_ECCBYTES 3
pekon gupta3f719062013-11-18 19:03:01 +0530103#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
Tom Rini673283f2011-11-18 12:48:09 +0000104#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
105#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
106
Sanjeev Premi741de262011-10-25 06:11:29 +0000107/* -----------------------------------------------------------------------------
Sanjeev Premi39708842011-10-25 06:11:30 +0000108 * Include common board configuration
Sanjeev Premi741de262011-10-25 06:11:29 +0000109 * -----------------------------------------------------------------------------
110 */
Sanjeev Premi39708842011-10-25 06:11:30 +0000111#include "omap3_evm_common.h"
Sanjeev Premiee8e2252011-10-25 06:11:28 +0000112
113/* -----------------------------------------------------------------------------
114 * Default environment
115 * -----------------------------------------------------------------------------
Tom Rixfccc0fc2009-06-28 12:52:31 -0500116 */
Tom Rini2e4b8b52012-05-21 11:20:45 +0000117#define CONFIG_BOOTDELAY 3
Sanjeev Premi136cf922009-05-15 23:48:37 +0200118
Dirk Behmead9bc8e2009-01-28 21:39:58 +0100119#define CONFIG_EXTRA_ENV_SETTINGS \
120 "loadaddr=0x82000000\0" \
Ajay Kumar Gupta73c86402009-11-04 15:58:23 -0600121 "usbtty=cdc_acm\0" \
Vaibhav Hiremathdcc4f382011-09-03 21:42:35 -0400122 "mmcdev=0\0" \
Sanjeev Premieffeda52011-09-23 05:25:28 +0000123 "console=ttyO0,115200n8\0" \
Dirk Behmead9bc8e2009-01-28 21:39:58 +0100124 "mmcargs=setenv bootargs console=${console} " \
125 "root=/dev/mmcblk0p2 rw " \
126 "rootfstype=ext3 rootwait\0" \
127 "nandargs=setenv bootargs console=${console} " \
128 "root=/dev/mtdblock4 rw " \
129 "rootfstype=jffs2\0" \
Vaibhav Hiremathdcc4f382011-09-03 21:42:35 -0400130 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
Dirk Behmead9bc8e2009-01-28 21:39:58 +0100131 "bootscript=echo Running bootscript from mmc ...; " \
Wolfgang Denk74de7ae2009-04-01 23:34:12 +0200132 "source ${loadaddr}\0" \
Vaibhav Hiremathdcc4f382011-09-03 21:42:35 -0400133 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
Dirk Behmead9bc8e2009-01-28 21:39:58 +0100134 "mmcboot=echo Booting from mmc ...; " \
135 "run mmcargs; " \
136 "bootm ${loadaddr}\0" \
137 "nandboot=echo Booting from nand ...; " \
138 "run nandargs; " \
139 "onenand read ${loadaddr} 280000 400000; " \
140 "bootm ${loadaddr}\0" \
141
142#define CONFIG_BOOTCOMMAND \
Andrew Bradford66968112012-10-01 05:06:52 +0000143 "mmc dev ${mmcdev}; if mmc rescan; then " \
Dirk Behmead9bc8e2009-01-28 21:39:58 +0100144 "if run loadbootscript; then " \
145 "run bootscript; " \
146 "else " \
147 "if run loaduimage; then " \
148 "run mmcboot; " \
149 "else run nandboot; " \
150 "fi; " \
151 "fi; " \
152 "else run nandboot; fi"
153
Sanjeev Premi741de262011-10-25 06:11:29 +0000154#endif /* __OMAP3EVM_CONFIG_H */