wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 1 | /* |
| 2 | * Driver for NAND support, Rick Bronson |
| 3 | * borrowed heavily from: |
| 4 | * (c) 1999 Machine Vision Holdings, Inc. |
| 5 | * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> |
wdenk | 384cc68 | 2005-04-03 22:35:21 +0000 | [diff] [blame] | 6 | * |
| 7 | * Added 16-bit nand support |
| 8 | * (C) 2004 Texas Instruments |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 9 | */ |
| 10 | |
| 11 | #include <common.h> |
Bartlomiej Sieka | addb2e1 | 2006-03-05 18:57:33 +0100 | [diff] [blame] | 12 | |
| 13 | |
| 14 | #ifndef CFG_NAND_LEGACY |
| 15 | /* |
| 16 | * |
| 17 | * New NAND support |
| 18 | * |
| 19 | */ |
| 20 | #include <common.h> |
| 21 | |
| 22 | #if (CONFIG_COMMANDS & CFG_CMD_NAND) |
| 23 | |
| 24 | #include <command.h> |
| 25 | #include <watchdog.h> |
| 26 | #include <malloc.h> |
| 27 | #include <asm/byteorder.h> |
| 28 | |
| 29 | #ifdef CONFIG_SHOW_BOOT_PROGRESS |
| 30 | # include <status_led.h> |
| 31 | # define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) |
| 32 | #else |
| 33 | # define SHOW_BOOT_PROGRESS(arg) |
| 34 | #endif |
| 35 | |
| 36 | #include <jffs2/jffs2.h> |
| 37 | #include <nand.h> |
| 38 | |
| 39 | extern nand_info_t nand_info[]; /* info for NAND chips */ |
| 40 | |
| 41 | static int nand_dump_oob(nand_info_t *nand, ulong off) |
| 42 | { |
| 43 | return 0; |
| 44 | } |
| 45 | |
| 46 | static int nand_dump(nand_info_t *nand, ulong off) |
| 47 | { |
| 48 | int i; |
| 49 | u_char *buf, *p; |
| 50 | |
| 51 | buf = malloc(nand->oobblock + nand->oobsize); |
| 52 | if (!buf) { |
| 53 | puts("No memory for page buffer\n"); |
| 54 | return 1; |
| 55 | } |
| 56 | off &= ~(nand->oobblock - 1); |
| 57 | i = nand_read_raw(nand, buf, off, nand->oobblock, nand->oobsize); |
| 58 | if (i < 0) { |
| 59 | printf("Error (%d) reading page %08x\n", i, off); |
| 60 | free(buf); |
| 61 | return 1; |
| 62 | } |
| 63 | printf("Page %08x dump:\n", off); |
| 64 | i = nand->oobblock >> 4; p = buf; |
| 65 | while (i--) { |
| 66 | printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x" |
| 67 | " %02x %02x %02x %02x %02x %02x %02x %02x\n", |
| 68 | p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7], |
| 69 | p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15]); |
| 70 | p += 16; |
| 71 | } |
| 72 | puts("OOB:\n"); |
| 73 | i = nand->oobsize >> 3; |
| 74 | while (i--) { |
| 75 | printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x\n", |
| 76 | p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]); |
| 77 | p += 8; |
| 78 | } |
| 79 | free(buf); |
| 80 | |
| 81 | return 0; |
| 82 | } |
| 83 | |
| 84 | /* ------------------------------------------------------------------------- */ |
| 85 | |
| 86 | static void |
| 87 | arg_off_size(int argc, char *argv[], ulong *off, ulong *size, ulong totsize) |
| 88 | { |
| 89 | *off = 0; |
| 90 | *size = 0; |
| 91 | |
| 92 | #if defined(CONFIG_JFFS2_NAND) && defined(CFG_JFFS_CUSTOM_PART) |
| 93 | if (argc >= 1 && strcmp(argv[0], "partition") == 0) { |
| 94 | int part_num; |
| 95 | struct part_info *part; |
| 96 | const char *partstr; |
| 97 | |
| 98 | if (argc >= 2) |
| 99 | partstr = argv[1]; |
| 100 | else |
| 101 | partstr = getenv("partition"); |
| 102 | |
| 103 | if (partstr) |
| 104 | part_num = (int)simple_strtoul(partstr, NULL, 10); |
| 105 | else |
| 106 | part_num = 0; |
| 107 | |
| 108 | part = jffs2_part_info(part_num); |
| 109 | if (part == NULL) { |
| 110 | printf("\nInvalid partition %d\n", part_num); |
| 111 | return; |
| 112 | } |
| 113 | *size = part->size; |
| 114 | *off = (ulong)part->offset; |
| 115 | } else |
| 116 | #endif |
| 117 | { |
| 118 | if (argc >= 1) |
| 119 | *off = (ulong)simple_strtoul(argv[0], NULL, 16); |
| 120 | else |
| 121 | *off = 0; |
| 122 | |
| 123 | if (argc >= 2) |
| 124 | *size = (ulong)simple_strtoul(argv[1], NULL, 16); |
| 125 | else |
| 126 | *size = totsize - *off; |
| 127 | |
| 128 | } |
| 129 | |
| 130 | } |
| 131 | |
| 132 | int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) |
| 133 | { |
| 134 | int i, dev, ret; |
| 135 | ulong addr, off, size; |
| 136 | char *cmd, *s; |
| 137 | nand_info_t *nand; |
| 138 | |
| 139 | /* at least two arguments please */ |
| 140 | if (argc < 2) |
| 141 | goto usage; |
| 142 | |
| 143 | cmd = argv[1]; |
| 144 | |
| 145 | if (strcmp(cmd, "info") == 0) { |
| 146 | |
| 147 | putc('\n'); |
| 148 | for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) { |
| 149 | if (nand_info[i].name) |
| 150 | printf("Device %d: %s, sector size %lu KiB\n", |
| 151 | i, nand_info[i].name, |
| 152 | nand_info[i].erasesize >> 10); |
| 153 | } |
| 154 | return 0; |
| 155 | } |
| 156 | |
| 157 | if (strcmp(cmd, "device") == 0) { |
| 158 | |
| 159 | if (argc < 3) { |
| 160 | if ((nand_curr_device < 0) || |
| 161 | (nand_curr_device >= CFG_MAX_NAND_DEVICE)) |
| 162 | puts("\nno devices available\n"); |
| 163 | else |
| 164 | printf("\nDevice %d: %s\n", nand_curr_device, |
| 165 | nand_info[nand_curr_device].name); |
| 166 | return 0; |
| 167 | } |
| 168 | dev = (int)simple_strtoul(argv[2], NULL, 10); |
| 169 | if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) { |
| 170 | puts("No such device\n"); |
| 171 | return 1; |
| 172 | } |
| 173 | printf("Device %d: %s", dev, nand_info[dev].name); |
| 174 | puts("... is now current device\n"); |
| 175 | nand_curr_device = dev; |
| 176 | return 0; |
| 177 | } |
| 178 | |
| 179 | if (strcmp(cmd, "bad") != 0 && strcmp(cmd, "erase") != 0 && |
| 180 | strncmp(cmd, "dump", 4) != 0 && |
| 181 | strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0) |
| 182 | goto usage; |
| 183 | |
| 184 | /* the following commands operate on the current device */ |
| 185 | if (nand_curr_device < 0 || nand_curr_device >= CFG_MAX_NAND_DEVICE || |
| 186 | !nand_info[nand_curr_device].name) { |
| 187 | puts("\nno devices available\n"); |
| 188 | return 1; |
| 189 | } |
| 190 | nand = &nand_info[nand_curr_device]; |
| 191 | |
| 192 | if (strcmp(cmd, "bad") == 0) { |
| 193 | printf("\nDevice %d bad blocks:\n", nand_curr_device); |
| 194 | for (off = 0; off < nand->size; off += nand->erasesize) |
| 195 | if (nand_block_isbad(nand, off)) |
| 196 | printf(" %08x\n", off); |
| 197 | return 0; |
| 198 | } |
| 199 | |
| 200 | if (strcmp(cmd, "erase") == 0) { |
| 201 | arg_off_size(argc - 2, argv + 2, &off, &size, nand->size); |
| 202 | if (off == 0 && size == 0) |
| 203 | return 1; |
| 204 | |
| 205 | printf("\nNAND erase: device %d offset 0x%x, size 0x%x ", |
| 206 | nand_curr_device, off, size); |
| 207 | ret = nand_erase(nand, off, size); |
| 208 | printf("%s\n", ret ? "ERROR" : "OK"); |
| 209 | |
| 210 | return ret == 0 ? 0 : 1; |
| 211 | } |
| 212 | |
| 213 | if (strncmp(cmd, "dump", 4) == 0) { |
| 214 | if (argc < 3) |
| 215 | goto usage; |
| 216 | |
| 217 | s = strchr(cmd, '.'); |
| 218 | off = (int)simple_strtoul(argv[2], NULL, 16); |
| 219 | |
| 220 | if (s != NULL && strcmp(s, ".oob") == 0) |
| 221 | ret = nand_dump_oob(nand, off); |
| 222 | else |
| 223 | ret = nand_dump(nand, off); |
| 224 | |
| 225 | return ret == 0 ? 1 : 0; |
| 226 | |
| 227 | } |
| 228 | |
| 229 | /* read write */ |
| 230 | if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) { |
| 231 | if (argc < 4) |
| 232 | goto usage; |
| 233 | /* |
| 234 | s = strchr(cmd, '.'); |
| 235 | clean = CLEAN_NONE; |
| 236 | if (s != NULL) { |
| 237 | if (strcmp(s, ".jffs2") == 0 || strcmp(s, ".e") == 0 |
| 238 | || strcmp(s, ".i")) |
| 239 | clean = CLEAN_JFFS2; |
| 240 | } |
| 241 | */ |
| 242 | addr = (ulong)simple_strtoul(argv[2], NULL, 16); |
| 243 | |
| 244 | arg_off_size(argc - 3, argv + 3, &off, &size, nand->size); |
| 245 | if (off == 0 && size == 0) |
| 246 | return 1; |
| 247 | |
| 248 | i = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */ |
| 249 | printf("\nNAND %s: device %d offset %u, size %u ... ", |
| 250 | i ? "read" : "write", nand_curr_device, off, size); |
| 251 | |
| 252 | if (i) |
| 253 | ret = nand_read(nand, off, &size, (u_char *)addr); |
| 254 | else |
| 255 | ret = nand_write(nand, off, &size, (u_char *)addr); |
| 256 | |
| 257 | printf(" %d bytes %s: %s\n", size, |
| 258 | i ? "read" : "written", ret ? "ERROR" : "OK"); |
| 259 | |
| 260 | return ret == 0 ? 0 : 1; |
| 261 | } |
| 262 | usage: |
| 263 | printf("Usage:\n%s\n", cmdtp->usage); |
| 264 | return 1; |
| 265 | } |
| 266 | |
| 267 | U_BOOT_CMD(nand, 5, 1, do_nand, |
| 268 | "nand - NAND sub-system\n", |
| 269 | "info - show available NAND devices\n" |
| 270 | "nand device [dev] - show or set current device\n" |
| 271 | "nand read[.jffs2] - addr off size\n" |
| 272 | "nand write[.jffs2] - addr off size - read/write `size' bytes starting\n" |
| 273 | " at offset `off' to/from memory address `addr'\n" |
| 274 | "nand erase [clean] [off size] - erase `size' bytes from\n" |
| 275 | " offset `off' (entire device if not specified)\n" |
| 276 | "nand bad - show bad blocks\n" |
| 277 | "nand dump[.oob] off - dump page\n" |
| 278 | "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n" |
| 279 | "nand markbad off - mark bad block at offset (UNSAFE)\n" |
| 280 | "nand biterr off - make a bit error at offset (UNSAFE)\n"); |
| 281 | |
| 282 | int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) |
| 283 | { |
| 284 | char *boot_device = NULL; |
| 285 | char *ep; |
| 286 | int dev; |
| 287 | int r; |
| 288 | ulong addr, cnt, offset = 0; |
| 289 | image_header_t *hdr; |
| 290 | nand_info_t *nand; |
| 291 | |
| 292 | switch (argc) { |
| 293 | case 1: |
| 294 | addr = CFG_LOAD_ADDR; |
| 295 | boot_device = getenv("bootdevice"); |
| 296 | break; |
| 297 | case 2: |
| 298 | addr = simple_strtoul(argv[1], NULL, 16); |
| 299 | boot_device = getenv("bootdevice"); |
| 300 | break; |
| 301 | case 3: |
| 302 | addr = simple_strtoul(argv[1], NULL, 16); |
| 303 | boot_device = argv[2]; |
| 304 | break; |
| 305 | case 4: |
| 306 | addr = simple_strtoul(argv[1], NULL, 16); |
| 307 | boot_device = argv[2]; |
| 308 | offset = simple_strtoul(argv[3], NULL, 16); |
| 309 | break; |
| 310 | default: |
| 311 | printf("Usage:\n%s\n", cmdtp->usage); |
| 312 | SHOW_BOOT_PROGRESS(-1); |
| 313 | return 1; |
| 314 | } |
| 315 | |
| 316 | if (!boot_device) { |
| 317 | puts("\n** No boot device **\n"); |
| 318 | SHOW_BOOT_PROGRESS(-1); |
| 319 | return 1; |
| 320 | } |
| 321 | |
| 322 | dev = simple_strtoul(boot_device, &ep, 16); |
| 323 | |
| 324 | if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) { |
| 325 | printf("\n** Device %d not available\n", dev); |
| 326 | SHOW_BOOT_PROGRESS(-1); |
| 327 | return 1; |
| 328 | } |
| 329 | |
| 330 | nand = &nand_info[dev]; |
| 331 | printf("\nLoading from device %d: %s (offset 0x%lx)\n", |
| 332 | dev, nand->name, offset); |
| 333 | |
| 334 | cnt = nand->oobblock; |
| 335 | r = nand_read(nand, offset, &cnt, (u_char *) addr); |
| 336 | if (r) { |
| 337 | printf("** Read error on %d\n", dev); |
| 338 | SHOW_BOOT_PROGRESS(-1); |
| 339 | return 1; |
| 340 | } |
| 341 | |
| 342 | hdr = (image_header_t *) addr; |
| 343 | |
| 344 | if (ntohl(hdr->ih_magic) != IH_MAGIC) { |
| 345 | printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic); |
| 346 | SHOW_BOOT_PROGRESS(-1); |
| 347 | return 1; |
| 348 | } |
| 349 | |
| 350 | print_image_hdr(hdr); |
| 351 | |
| 352 | cnt = (ntohl(hdr->ih_size) + sizeof (image_header_t)); |
| 353 | |
| 354 | r = nand_read(nand, offset, &cnt, (u_char *) addr); |
| 355 | if (r) { |
| 356 | printf("** Read error on %d\n", dev); |
| 357 | SHOW_BOOT_PROGRESS(-1); |
| 358 | return 1; |
| 359 | } |
| 360 | |
| 361 | /* Loading ok, update default load address */ |
| 362 | |
| 363 | load_addr = addr; |
| 364 | |
| 365 | /* Check if we should attempt an auto-start */ |
| 366 | if (((ep = getenv("autostart")) != NULL) && (strcmp(ep, "yes") == 0)) { |
| 367 | char *local_args[2]; |
| 368 | extern int do_bootm(cmd_tbl_t *, int, int, char *[]); |
| 369 | |
| 370 | local_args[0] = argv[0]; |
| 371 | local_args[1] = NULL; |
| 372 | |
| 373 | printf("Automatic boot of image at addr 0x%08lx ...\n", addr); |
| 374 | |
| 375 | do_bootm(cmdtp, 0, 1, local_args); |
| 376 | return 1; |
| 377 | } |
| 378 | return 0; |
| 379 | } |
| 380 | |
| 381 | U_BOOT_CMD(nboot, 4, 1, do_nandboot, |
| 382 | "nboot - boot from NAND device\n", "loadAddr dev\n"); |
| 383 | |
| 384 | |
| 385 | #endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ |
| 386 | |
| 387 | #else /* CFG_NAND_LEGACY */ |
| 388 | /* |
| 389 | * |
| 390 | * Legacy NAND support - to be phased out |
| 391 | * |
| 392 | */ |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 393 | #include <command.h> |
| 394 | #include <malloc.h> |
| 395 | #include <asm/io.h> |
wdenk | a3d991b | 2004-04-15 21:48:45 +0000 | [diff] [blame] | 396 | #include <watchdog.h> |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 397 | |
| 398 | #ifdef CONFIG_SHOW_BOOT_PROGRESS |
| 399 | # include <status_led.h> |
| 400 | # define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) |
| 401 | #else |
| 402 | # define SHOW_BOOT_PROGRESS(arg) |
| 403 | #endif |
| 404 | |
Bartlomiej Sieka | addb2e1 | 2006-03-05 18:57:33 +0100 | [diff] [blame] | 405 | #if (CONFIG_COMMANDS & CFG_CMD_NAND) |
| 406 | #include <linux/mtd/nand_legacy.h> |
| 407 | #if 0 |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 408 | #include <linux/mtd/nand_ids.h> |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 409 | #include <jffs2/jffs2.h> |
Bartlomiej Sieka | addb2e1 | 2006-03-05 18:57:33 +0100 | [diff] [blame] | 410 | #endif |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 411 | |
wdenk | 1f4bb37 | 2003-07-27 00:21:01 +0000 | [diff] [blame] | 412 | #ifdef CONFIG_OMAP1510 |
| 413 | void archflashwp(void *archdata, int wp); |
| 414 | #endif |
| 415 | |
| 416 | #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) |
| 417 | |
wdenk | a43278a | 2003-09-11 19:48:06 +0000 | [diff] [blame] | 418 | #undef NAND_DEBUG |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 419 | #undef PSYCHO_DEBUG |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 420 | |
| 421 | /* ****************** WARNING ********************* |
| 422 | * When ALLOW_ERASE_BAD_DEBUG is non-zero the erase command will |
| 423 | * erase (or at least attempt to erase) blocks that are marked |
| 424 | * bad. This can be very handy if you are _sure_ that the block |
| 425 | * is OK, say because you marked a good block bad to test bad |
| 426 | * block handling and you are done testing, or if you have |
| 427 | * accidentally marked blocks bad. |
| 428 | * |
| 429 | * Erasing factory marked bad blocks is a _bad_ idea. If the |
| 430 | * erase succeeds there is no reliable way to find them again, |
| 431 | * and attempting to program or erase bad blocks can affect |
| 432 | * the data in _other_ (good) blocks. |
| 433 | */ |
| 434 | #define ALLOW_ERASE_BAD_DEBUG 0 |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 435 | |
| 436 | #define CONFIG_MTD_NAND_ECC /* enable ECC */ |
wdenk | 1f4bb37 | 2003-07-27 00:21:01 +0000 | [diff] [blame] | 437 | #define CONFIG_MTD_NAND_ECC_JFFS2 |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 438 | |
Bartlomiej Sieka | addb2e1 | 2006-03-05 18:57:33 +0100 | [diff] [blame] | 439 | /* bits for nand_legacy_rw() `cmd'; or together as needed */ |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 440 | #define NANDRW_READ 0x01 |
| 441 | #define NANDRW_WRITE 0x00 |
| 442 | #define NANDRW_JFFS2 0x02 |
wdenk | a3d991b | 2004-04-15 21:48:45 +0000 | [diff] [blame] | 443 | #define NANDRW_JFFS2_SKIP 0x04 |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 444 | |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 445 | /* |
Bartlomiej Sieka | addb2e1 | 2006-03-05 18:57:33 +0100 | [diff] [blame] | 446 | * Imports from nand_legacy.c |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 447 | */ |
Bartlomiej Sieka | addb2e1 | 2006-03-05 18:57:33 +0100 | [diff] [blame] | 448 | extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; |
| 449 | extern int curr_device; |
| 450 | extern int nand_legacy_erase(struct nand_chip *nand, size_t ofs, |
| 451 | size_t len, int clean); |
| 452 | extern int nand_legacy_rw(struct nand_chip *nand, int cmd, size_t start, |
| 453 | size_t len, size_t *retlen, u_char *buf); |
| 454 | extern void nand_print(struct nand_chip *nand); |
| 455 | extern void nand_print_bad(struct nand_chip *nand); |
| 456 | extern int nand_read_oob(struct nand_chip *nand, size_t ofs, |
| 457 | size_t len, size_t *retlen, u_char *buf); |
| 458 | extern int nand_write_oob(struct nand_chip *nand, size_t ofs, |
| 459 | size_t len, size_t *retlen, const u_char *buf); |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 460 | |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 461 | |
| 462 | int do_nand (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| 463 | { |
| 464 | int rcode = 0; |
| 465 | |
| 466 | switch (argc) { |
| 467 | case 0: |
| 468 | case 1: |
| 469 | printf ("Usage:\n%s\n", cmdtp->usage); |
| 470 | return 1; |
| 471 | case 2: |
wdenk | 8bde7f7 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 472 | if (strcmp(argv[1],"info") == 0) { |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 473 | int i; |
| 474 | |
| 475 | putc ('\n'); |
| 476 | |
| 477 | for (i=0; i<CFG_MAX_NAND_DEVICE; ++i) { |
| 478 | if(nand_dev_desc[i].ChipID == NAND_ChipID_UNKNOWN) |
| 479 | continue; /* list only known devices */ |
| 480 | printf ("Device %d: ", i); |
| 481 | nand_print(&nand_dev_desc[i]); |
| 482 | } |
| 483 | return 0; |
| 484 | |
| 485 | } else if (strcmp(argv[1],"device") == 0) { |
| 486 | if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) { |
| 487 | puts ("\nno devices available\n"); |
| 488 | return 1; |
| 489 | } |
| 490 | printf ("\nDevice %d: ", curr_device); |
| 491 | nand_print(&nand_dev_desc[curr_device]); |
| 492 | return 0; |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 493 | |
| 494 | } else if (strcmp(argv[1],"bad") == 0) { |
| 495 | if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) { |
| 496 | puts ("\nno devices available\n"); |
| 497 | return 1; |
| 498 | } |
| 499 | printf ("\nDevice %d bad blocks:\n", curr_device); |
| 500 | nand_print_bad(&nand_dev_desc[curr_device]); |
| 501 | return 0; |
| 502 | |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 503 | } |
| 504 | printf ("Usage:\n%s\n", cmdtp->usage); |
| 505 | return 1; |
| 506 | case 3: |
| 507 | if (strcmp(argv[1],"device") == 0) { |
| 508 | int dev = (int)simple_strtoul(argv[2], NULL, 10); |
| 509 | |
| 510 | printf ("\nDevice %d: ", dev); |
| 511 | if (dev >= CFG_MAX_NAND_DEVICE) { |
| 512 | puts ("unknown device\n"); |
| 513 | return 1; |
| 514 | } |
| 515 | nand_print(&nand_dev_desc[dev]); |
| 516 | /*nand_print (dev);*/ |
| 517 | |
| 518 | if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) { |
| 519 | return 1; |
| 520 | } |
| 521 | |
| 522 | curr_device = dev; |
| 523 | |
| 524 | puts ("... is now current device\n"); |
| 525 | |
| 526 | return 0; |
| 527 | } |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 528 | else if (strcmp(argv[1],"erase") == 0 && strcmp(argv[2], "clean") == 0) { |
| 529 | struct nand_chip* nand = &nand_dev_desc[curr_device]; |
| 530 | ulong off = 0; |
| 531 | ulong size = nand->totlen; |
| 532 | int ret; |
| 533 | |
| 534 | printf ("\nNAND erase: device %d offset %ld, size %ld ... ", |
| 535 | curr_device, off, size); |
| 536 | |
Bartlomiej Sieka | addb2e1 | 2006-03-05 18:57:33 +0100 | [diff] [blame] | 537 | ret = nand_legacy_erase (nand, off, size, 1); |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 538 | |
| 539 | printf("%s\n", ret ? "ERROR" : "OK"); |
| 540 | |
| 541 | return ret; |
| 542 | } |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 543 | |
| 544 | printf ("Usage:\n%s\n", cmdtp->usage); |
| 545 | return 1; |
| 546 | default: |
| 547 | /* at least 4 args */ |
| 548 | |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 549 | if (strncmp(argv[1], "read", 4) == 0 || |
| 550 | strncmp(argv[1], "write", 5) == 0) { |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 551 | ulong addr = simple_strtoul(argv[2], NULL, 16); |
| 552 | ulong off = simple_strtoul(argv[3], NULL, 16); |
| 553 | ulong size = simple_strtoul(argv[4], NULL, 16); |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 554 | int cmd = (strncmp(argv[1], "read", 4) == 0) ? |
| 555 | NANDRW_READ : NANDRW_WRITE; |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 556 | int ret, total; |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 557 | char* cmdtail = strchr(argv[1], '.'); |
| 558 | |
| 559 | if (cmdtail && !strncmp(cmdtail, ".oob", 2)) { |
| 560 | /* read out-of-band data */ |
| 561 | if (cmd & NANDRW_READ) { |
| 562 | ret = nand_read_oob(nand_dev_desc + curr_device, |
Wolfgang Denk | 77ddac9 | 2005-10-13 16:45:02 +0200 | [diff] [blame] | 563 | off, size, (size_t *)&total, |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 564 | (u_char*)addr); |
| 565 | } |
| 566 | else { |
| 567 | ret = nand_write_oob(nand_dev_desc + curr_device, |
Wolfgang Denk | 77ddac9 | 2005-10-13 16:45:02 +0200 | [diff] [blame] | 568 | off, size, (size_t *)&total, |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 569 | (u_char*)addr); |
| 570 | } |
| 571 | return ret; |
| 572 | } |
| 573 | else if (cmdtail && !strncmp(cmdtail, ".jffs2", 2)) |
| 574 | cmd |= NANDRW_JFFS2; /* skip bad blocks */ |
wdenk | a3d991b | 2004-04-15 21:48:45 +0000 | [diff] [blame] | 575 | else if (cmdtail && !strncmp(cmdtail, ".jffs2s", 2)) { |
| 576 | cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */ |
| 577 | if (cmd & NANDRW_READ) |
| 578 | cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */ |
| 579 | } |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 580 | #ifdef SXNI855T |
| 581 | /* need ".e" same as ".j" for compatibility with older units */ |
| 582 | else if (cmdtail && !strcmp(cmdtail, ".e")) |
| 583 | cmd |= NANDRW_JFFS2; /* skip bad blocks */ |
| 584 | #endif |
stroese | a842a6d | 2004-12-16 17:45:46 +0000 | [diff] [blame] | 585 | #ifdef CFG_NAND_SKIP_BAD_DOT_I |
| 586 | /* need ".i" same as ".jffs2s" for compatibility with older units (esd) */ |
| 587 | /* ".i" for image -> read skips bad block (no 0xff) */ |
Stefan Roese | 9bcf2ab | 2005-08-12 16:46:35 +0200 | [diff] [blame] | 588 | else if (cmdtail && !strcmp(cmdtail, ".i")) { |
stroese | a842a6d | 2004-12-16 17:45:46 +0000 | [diff] [blame] | 589 | cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */ |
| 590 | if (cmd & NANDRW_READ) |
| 591 | cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */ |
Stefan Roese | 9bcf2ab | 2005-08-12 16:46:35 +0200 | [diff] [blame] | 592 | } |
stroese | a842a6d | 2004-12-16 17:45:46 +0000 | [diff] [blame] | 593 | #endif /* CFG_NAND_SKIP_BAD_DOT_I */ |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 594 | else if (cmdtail) { |
| 595 | printf ("Usage:\n%s\n", cmdtp->usage); |
| 596 | return 1; |
| 597 | } |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 598 | |
| 599 | printf ("\nNAND %s: device %d offset %ld, size %ld ... ", |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 600 | (cmd & NANDRW_READ) ? "read" : "write", |
| 601 | curr_device, off, size); |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 602 | |
Bartlomiej Sieka | addb2e1 | 2006-03-05 18:57:33 +0100 | [diff] [blame] | 603 | ret = nand_legacy_rw(nand_dev_desc + curr_device, cmd, off, size, |
Wolfgang Denk | 77ddac9 | 2005-10-13 16:45:02 +0200 | [diff] [blame] | 604 | (size_t *)&total, (u_char*)addr); |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 605 | |
wdenk | 1f4bb37 | 2003-07-27 00:21:01 +0000 | [diff] [blame] | 606 | printf (" %d bytes %s: %s\n", total, |
wdenk | 998eaae | 2004-04-18 19:43:36 +0000 | [diff] [blame] | 607 | (cmd & NANDRW_READ) ? "read" : "written", |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 608 | ret ? "ERROR" : "OK"); |
| 609 | |
| 610 | return ret; |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 611 | } else if (strcmp(argv[1],"erase") == 0 && |
| 612 | (argc == 4 || strcmp("clean", argv[2]) == 0)) { |
| 613 | int clean = argc == 5; |
| 614 | ulong off = simple_strtoul(argv[2 + clean], NULL, 16); |
| 615 | ulong size = simple_strtoul(argv[3 + clean], NULL, 16); |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 616 | int ret; |
| 617 | |
| 618 | printf ("\nNAND erase: device %d offset %ld, size %ld ... ", |
| 619 | curr_device, off, size); |
| 620 | |
Bartlomiej Sieka | addb2e1 | 2006-03-05 18:57:33 +0100 | [diff] [blame] | 621 | ret = nand_legacy_erase (nand_dev_desc + curr_device, |
| 622 | off, size, clean); |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 623 | |
| 624 | printf("%s\n", ret ? "ERROR" : "OK"); |
| 625 | |
| 626 | return ret; |
| 627 | } else { |
| 628 | printf ("Usage:\n%s\n", cmdtp->usage); |
| 629 | rcode = 1; |
| 630 | } |
| 631 | |
| 632 | return rcode; |
| 633 | } |
| 634 | } |
| 635 | |
wdenk | 0d49839 | 2003-07-01 21:06:45 +0000 | [diff] [blame] | 636 | U_BOOT_CMD( |
| 637 | nand, 5, 1, do_nand, |
wdenk | b0fce99 | 2003-06-29 21:03:46 +0000 | [diff] [blame] | 638 | "nand - NAND sub-system\n", |
| 639 | "info - show available NAND devices\n" |
| 640 | "nand device [dev] - show or set current device\n" |
wdenk | a3d991b | 2004-04-15 21:48:45 +0000 | [diff] [blame] | 641 | "nand read[.jffs2[s]] addr off size\n" |
wdenk | b0fce99 | 2003-06-29 21:03:46 +0000 | [diff] [blame] | 642 | "nand write[.jffs2] addr off size - read/write `size' bytes starting\n" |
| 643 | " at offset `off' to/from memory address `addr'\n" |
| 644 | "nand erase [clean] [off size] - erase `size' bytes from\n" |
| 645 | " offset `off' (entire device if not specified)\n" |
| 646 | "nand bad - show bad blocks\n" |
| 647 | "nand read.oob addr off size - read out-of-band data\n" |
| 648 | "nand write.oob addr off size - read out-of-band data\n" |
| 649 | ); |
| 650 | |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 651 | int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| 652 | { |
| 653 | char *boot_device = NULL; |
| 654 | char *ep; |
| 655 | int dev; |
| 656 | ulong cnt; |
| 657 | ulong addr; |
| 658 | ulong offset = 0; |
| 659 | image_header_t *hdr; |
| 660 | int rcode = 0; |
| 661 | switch (argc) { |
| 662 | case 1: |
| 663 | addr = CFG_LOAD_ADDR; |
| 664 | boot_device = getenv ("bootdevice"); |
| 665 | break; |
| 666 | case 2: |
| 667 | addr = simple_strtoul(argv[1], NULL, 16); |
| 668 | boot_device = getenv ("bootdevice"); |
| 669 | break; |
| 670 | case 3: |
| 671 | addr = simple_strtoul(argv[1], NULL, 16); |
| 672 | boot_device = argv[2]; |
| 673 | break; |
| 674 | case 4: |
| 675 | addr = simple_strtoul(argv[1], NULL, 16); |
| 676 | boot_device = argv[2]; |
| 677 | offset = simple_strtoul(argv[3], NULL, 16); |
| 678 | break; |
| 679 | default: |
| 680 | printf ("Usage:\n%s\n", cmdtp->usage); |
| 681 | SHOW_BOOT_PROGRESS (-1); |
| 682 | return 1; |
| 683 | } |
| 684 | |
| 685 | if (!boot_device) { |
| 686 | puts ("\n** No boot device **\n"); |
| 687 | SHOW_BOOT_PROGRESS (-1); |
| 688 | return 1; |
| 689 | } |
| 690 | |
| 691 | dev = simple_strtoul(boot_device, &ep, 16); |
| 692 | |
| 693 | if ((dev >= CFG_MAX_NAND_DEVICE) || |
| 694 | (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) { |
| 695 | printf ("\n** Device %d not available\n", dev); |
| 696 | SHOW_BOOT_PROGRESS (-1); |
| 697 | return 1; |
| 698 | } |
| 699 | |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 700 | printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n", |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 701 | dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR, |
| 702 | offset); |
| 703 | |
Bartlomiej Sieka | addb2e1 | 2006-03-05 18:57:33 +0100 | [diff] [blame] | 704 | if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset, |
| 705 | SECTORSIZE, NULL, (u_char *)addr)) { |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 706 | printf ("** Read error on %d\n", dev); |
| 707 | SHOW_BOOT_PROGRESS (-1); |
| 708 | return 1; |
| 709 | } |
| 710 | |
| 711 | hdr = (image_header_t *)addr; |
| 712 | |
| 713 | if (ntohl(hdr->ih_magic) == IH_MAGIC) { |
| 714 | |
| 715 | print_image_hdr (hdr); |
| 716 | |
| 717 | cnt = (ntohl(hdr->ih_size) + sizeof(image_header_t)); |
| 718 | cnt -= SECTORSIZE; |
| 719 | } else { |
Wolfgang Denk | dc013d4 | 2006-03-12 01:59:35 +0100 | [diff] [blame] | 720 | printf ("\n** Bad Magic Number 0x%x **\n", ntohl(hdr->ih_magic)); |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 721 | SHOW_BOOT_PROGRESS (-1); |
| 722 | return 1; |
| 723 | } |
| 724 | |
Bartlomiej Sieka | addb2e1 | 2006-03-05 18:57:33 +0100 | [diff] [blame] | 725 | if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, |
| 726 | offset + SECTORSIZE, cnt, NULL, |
| 727 | (u_char *)(addr+SECTORSIZE))) { |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 728 | printf ("** Read error on %d\n", dev); |
| 729 | SHOW_BOOT_PROGRESS (-1); |
| 730 | return 1; |
| 731 | } |
| 732 | |
| 733 | /* Loading ok, update default load address */ |
| 734 | |
| 735 | load_addr = addr; |
| 736 | |
| 737 | /* Check if we should attempt an auto-start */ |
| 738 | if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) { |
| 739 | char *local_args[2]; |
| 740 | extern int do_bootm (cmd_tbl_t *, int, int, char *[]); |
| 741 | |
| 742 | local_args[0] = argv[0]; |
| 743 | local_args[1] = NULL; |
| 744 | |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 745 | printf ("Automatic boot of image at addr 0x%08lx ...\n", addr); |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 746 | |
| 747 | do_bootm (cmdtp, 0, 1, local_args); |
| 748 | rcode = 1; |
| 749 | } |
| 750 | return rcode; |
| 751 | } |
| 752 | |
wdenk | 0d49839 | 2003-07-01 21:06:45 +0000 | [diff] [blame] | 753 | U_BOOT_CMD( |
| 754 | nboot, 4, 1, do_nandboot, |
wdenk | b0fce99 | 2003-06-29 21:03:46 +0000 | [diff] [blame] | 755 | "nboot - boot from NAND device\n", |
| 756 | "loadAddr dev\n" |
| 757 | ); |
| 758 | |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 759 | #endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ |
Bartlomiej Sieka | addb2e1 | 2006-03-05 18:57:33 +0100 | [diff] [blame] | 760 | |
| 761 | #endif /* CFG_NAND_LEGACY */ |