Blame - drivers/reset/Kconfig - platform/external/u-boot

blob: 73bbd3069258e688bc42aa839ff3eb8f7afbb87b [file] [log] [blame]

Stephen Warren	89c1e2d	2016-06-17 09:43:58 -0600	[diff] [blame]	1	menu "Reset Controller Support"
				2
				3	config DM_RESET
				4	bool "Enable reset controllers using Driver Model"
				5	depends on DM && OF_CONTROL
				6	help
				7	Enable support for the reset controller driver class. Many hardware
				8	modules are equipped with a reset signal, typically driven by some
				9	reset controller hardware module within the chip. In U-Boot, reset
				10	controller drivers allow control over these reset signals. In some
				11	cases this API is applicable to chips outside the CPU as well,
				12	although driving such reset isgnals using GPIOs may be more
				13	appropriate in this case.
				14
Stephen Warren	4581b71	2016-06-17 09:43:59 -0600	[diff] [blame]	15	config SANDBOX_RESET
				16	bool "Enable the sandbox reset test driver"
				17	depends on DM_MAILBOX && SANDBOX
				18	help
				19	Enable support for a test reset controller implementation, which
				20	simply accepts requests to reset various HW modules without actually
				21	doing anything beyond a little error checking.
				22
Patrice Chotard	584861f	2017-03-22 10:54:03 +0100	[diff] [blame]	23	config STI_RESET
				24	bool "Enable the STi reset"
				25	depends on ARCH_STI
				26	help
				27	Support for reset controllers on STMicroelectronics STiH407 family SoCs.
				28	Say Y if you want to control reset signals provided by system config
				29	block.
				30
Patrice Chotard	23a0641	2017-09-13 18:00:07 +0200	[diff] [blame]	31	config STM32_RESET
				32	bool "Enable the STM32 reset"
Trevor Woerner	71f6354	2020-05-06 08:02:42 -0400	[diff] [blame]	33	depends on ARCH_STM32 \|\| ARCH_STM32MP
Patrice Chotard	23a0641	2017-09-13 18:00:07 +0200	[diff] [blame]	34	help
				35	Support for reset controllers on STMicroelectronics STM32 family SoCs.
Trevor Woerner	1bc5d3a	2020-05-06 08:02:43 -0400	[diff] [blame]	36	This reset driver is compatible with STM32 F4/F7 and H7 SoCs.
Patrice Chotard	23a0641	2017-09-13 18:00:07 +0200	[diff] [blame]	37
Stephen Warren	fe60f06	2016-09-13 10:45:58 -0600	[diff] [blame]	38	config TEGRA_CAR_RESET
				39	bool "Enable Tegra CAR-based reset driver"
				40	depends on TEGRA_CAR
				41	help
				42	Enable support for manipulating Tegra's on-SoC reset signals via
				43	direct register access to the Tegra CAR (Clock And Reset controller).
				44
Stephen Warren	4dd99d1	2016-08-08 11:28:25 -0600	[diff] [blame]	45	config TEGRA186_RESET
				46	bool "Enable Tegra186 BPMP-based reset driver"
				47	depends on TEGRA186_BPMP
				48	help
				49	Enable support for manipulating Tegra's on-SoC reset signals via IPC
				50	requests to the BPMP (Boot and Power Management Processor).
				51
Andreas Dannenberg	65c8a79	2018-08-27 15:57:41 +0530	[diff] [blame]	52	config RESET_TI_SCI
				53	bool "TI System Control Interface (TI SCI) reset driver"
				54	depends on DM_RESET && TI_SCI_PROTOCOL
				55	help
				56	This enables the reset driver support over TI System Control Interface
				57	available on some new TI's SoCs. If you wish to use reset resources
				58	managed by the TI System Controller, say Y here. Otherwise, say N.
				59
Álvaro Fernández Rojas	18393f7	2017-05-03 15:10:21 +0200	[diff] [blame]	60	config RESET_BCM6345
				61	bool "Reset controller driver for BCM6345"
				62	depends on DM_RESET && ARCH_BMIPS
				63	help
				64	Support reset controller on BCM6345.
				65
Masahiro Yamada	4fb96c4	2016-10-08 13:25:31 +0900	[diff] [blame]	66	config RESET_UNIPHIER
				67	bool "Reset controller driver for UniPhier SoCs"
				68	depends on ARCH_UNIPHIER
				69	default y
				70	help
				71	Support for reset controllers on UniPhier SoCs.
				72	Say Y if you want to control reset signals provided by System Control
				73	block, Media I/O block, Peripheral Block.
				74
Chia-Wei, Wang	b2424cd	2020-10-15 10:25:14 +0800	[diff] [blame]	75	config RESET_AST2500
maxims@google.com	858d497	2017-04-17 12:00:24 -0700	[diff] [blame]	76	bool "Reset controller driver for AST2500 SoCs"
Chia-Wei, Wang	611a28c	2020-10-15 10:25:13 +0800	[diff] [blame]	77	depends on DM_RESET
maxims@google.com	858d497	2017-04-17 12:00:24 -0700	[diff] [blame]	78	default y if ASPEED_AST2500
				79	help
Chia-Wei, Wang	611a28c	2020-10-15 10:25:13 +0800	[diff] [blame]	80	Support for reset controller on AST2500 SoC.
				81	Say Y if you want to control reset signals of different peripherals
				82	through System Control Unit (SCU).
maxims@google.com	858d497	2017-04-17 12:00:24 -0700	[diff] [blame]	83
Chia-Wei, Wang	9fc2108	2020-12-14 13:54:26 +0800	[diff] [blame]	84	config RESET_AST2600
				85	bool "Reset controller driver for AST2600 SoCs"
				86	depends on DM_RESET
				87	default y if ASPEED_AST2600
				88	help
				89	Support for reset controller on AST2600 SoC.
				90	Say Y if you want to control reset signals of different peripherals
				91	through System Control Unit (SCU).
				92
Elaine Zhang	760188c	2017-12-19 18:22:37 +0800	[diff] [blame]	93	config RESET_ROCKCHIP
				94	bool "Reset controller driver for Rockchip SoCs"
				95	depends on DM_RESET && ARCH_ROCKCHIP && CLK
				96	default y
				97	help
				98	Support for reset controller on rockchip SoC. The main limitation
				99	though is that some reset signals, like I2C or MISC reset multiple
				100	devices.
				101
Eugeniy Paltsev	c597e24	2019-10-08 19:29:30 +0300	[diff] [blame]	102	config RESET_HSDK
				103	bool "Synopsys HSDK Reset Driver"
				104	depends on DM_RESET && TARGET_HSDK
				105	default y
				106	help
				107	This enables the reset controller driver for HSDK board.
				108
Neil Armstrong	20367bb	2018-03-29 14:55:25 +0200	[diff] [blame]	109	config RESET_MESON
				110	bool "Reset controller driver for Amlogic Meson SoCs"
				111	depends on DM_RESET && ARCH_MESON
				112	imply REGMAP
				113	default y
				114	help
				115	Support for reset controller on Amlogic Meson SoC.
				116
Dinh Nguyen	2ac7188	2018-04-04 17:18:20 -0500	[diff] [blame]	117	config RESET_SOCFPGA
				118	bool "Reset controller driver for SoCFPGA"
				119	depends on DM_RESET && ARCH_SOCFPGA
				120	default y
				121	help
				122	Support for reset controller on SoCFPGA platform.
				123
Weijie Gao	3e066bc	2018-12-20 16:12:51 +0800	[diff] [blame]	124	config RESET_MEDIATEK
				125	bool "Reset controller driver for MediaTek SoCs"
				126	depends on DM_RESET && ARCH_MEDIATEK && CLK
				127	default y
				128	help
				129	Support for reset controller on MediaTek SoCs.
				130
Weijie Gao	f7ae6b6	2019-09-25 17:45:29 +0800	[diff] [blame]	131	config RESET_MTMIPS
				132	bool "Reset controller driver for MediaTek MIPS platform"
				133	depends on DM_RESET && ARCH_MTMIPS
				134	default y
				135	help
				136	Support for reset controller on MediaTek MIPS platform.
				137
Jagan Teki	99ba430	2019-01-18 22:18:13 +0530	[diff] [blame]	138	config RESET_SUNXI
				139	bool "RESET support for Allwinner SoCs"
				140	depends on DM_RESET && ARCH_SUNXI
				141	default y
				142	help
				143	This enables support for common reset driver for
				144	Allwinner SoCs.
				145
Shawn Guo	f5e6c16	2019-03-20 15:32:39 +0800	[diff] [blame]	146	config RESET_HISILICON
				147	bool "Reset controller driver for HiSilicon SoCs"
				148	depends on DM_RESET
				149	help
				150	Support for reset controller on HiSilicon SoCs.
				151
Patrick Wildt	6300dc4	2019-10-03 16:08:35 +0200	[diff] [blame]	152	config RESET_IMX7
				153	bool "i.MX7/8 Reset Driver"
				154	depends on DM_RESET && (ARCH_MX7 \|\| ARCH_IMX8M)
				155	default y
				156	help
				157	Support for reset controller on i.MX7/8 SoCs.
				158
Sumit Garg	4258827	2022-08-04 19:57:11 +0530	[diff] [blame]	159	config RESET_QCOM
				160	bool "Reset driver for Qualcomm SoCs"
				161	depends on DM_RESET && (ARCH_SNAPDRAGON \|\| ARCH_IPQ40XX)
Robert Marko	8ef7df5	2020-09-10 16:00:02 +0200	[diff] [blame]	162	default y
				163	help
Sumit Garg	4258827	2022-08-04 19:57:11 +0530	[diff] [blame]	164	Support for reset controller on Qualcomm SoCs.
Robert Marko	8ef7df5	2020-09-10 16:00:02 +0200	[diff] [blame]	165
Sagar Shrikant Kadam	ed50d3f	2020-07-29 02:36:14 -0700	[diff] [blame]	166	config RESET_SIFIVE
				167	bool "Reset Driver for SiFive SoC's"
Green Wan	70415e1	2021-05-27 06:52:13 -0700	[diff] [blame]	168	depends on DM_RESET && CLK_SIFIVE_PRCI && (TARGET_SIFIVE_UNLEASHED \|\| TARGET_SIFIVE_UNMATCHED)
Sagar Shrikant Kadam	ed50d3f	2020-07-29 02:36:14 -0700	[diff] [blame]	169	default y
				170	help
				171	PRCI module within SiFive SoC's provides mechanism to reset
				172	different hw blocks like DDR, gemgxl. With this driver we leverage
				173	U-Boot's reset framework to reset these hardware blocks.
				174
Yanhong Wang	d13de4f	2023-03-29 11:42:11 +0800	[diff] [blame]	175	config RESET_JH7110
				176	bool "Reset driver for StarFive JH7110 SoC"
				177	depends on DM_RESET && STARFIVE_JH7110
				178	default y
				179	help
				180	Support for reset controller on StarFive
				181	JH7110 SoCs.
				182
				183	config SPL_RESET_JH7110
				184	bool "SPL Reset driver for StarFive JH7110 SoC"
				185	depends on SPL && STARFIVE_JH7110
				186	default y
				187	help
				188	Support for reset controller on StarFive
				189	JH7110 SoCs in SPL.
				190
Sean Anderson	038b13e	2020-06-24 06:41:14 -0400	[diff] [blame]	191	config RESET_SYSCON
				192	bool "Enable generic syscon reset driver support"
				193	depends on DM_RESET
				194	help
				195	Support generic syscon mapped register reset devices.
Nicolas Saenz Julienne	f676eb2	2020-06-29 18:37:23 +0200	[diff] [blame]	196
				197	config RESET_RASPBERRYPI
				198	bool "Raspberry Pi 4 Firmware Reset Controller Driver"
				199	depends on DM_RESET && ARCH_BCM283X
				200	default USB_XHCI_PCI
				201	help
				202	Raspberry Pi 4's co-processor controls some of the board's HW
				203	initialization process, but it's up to Linux to trigger it when
				204	relevant. This driver provides a reset controller capable of
				205	interfacing with RPi4's co-processor and model these firmware
				206	initialization routines as reset lines.
Etienne Carriere	34d76fe	2020-09-09 18:44:06 +0200	[diff] [blame]	207
				208	config RESET_SCMI
				209	bool "Enable SCMI reset domain driver"
				210	select SCMI_FIRMWARE
				211	help
				212	Enable this option if you want to support reset controller
				213	devices exposed by a SCMI agent based on SCMI reset domain
				214	protocol communication with a SCMI server.
Michal Simek	3f123b7	2021-07-30 08:00:10 +0200	[diff] [blame]	215
				216	config RESET_ZYNQMP
T Karthik Reddy	9df5081	2022-07-20 03:59:57 -0600	[diff] [blame]	217	bool "Reset Driver for Xilinx ZynqMP & Versal SoC's"
Michal Simek	3f123b7	2021-07-30 08:00:10 +0200	[diff] [blame]	218	depends on DM_RESET && ZYNQMP_FIRMWARE
				219	help
T Karthik Reddy	9df5081	2022-07-20 03:59:57 -0600	[diff] [blame]	220	Support for reset controller on Xilinx ZynqMP & Versal SoC's. Driver
				221	is only passing request via Xilinx firmware interface to TF-A and PMU
Michal Simek	3f123b7	2021-07-30 08:00:10 +0200	[diff] [blame]	222	firmware.
				223
Keerthy	795b2c4	2022-01-27 13:16:51 +0100	[diff] [blame]	224	config RESET_DRA7
				225	bool "Support for TI's DRA7 Reset driver"
				226	depends on DM_RESET
				227	help
				228	Support for TI DRA7-RESET subsystem. Basic Assert/Deassert
				229	is supported.
Sergiu Moga	6104009	2023-01-04 16:03:18 +0200	[diff] [blame]	230
				231	config RESET_AT91
				232	bool "Enable support for Microchip/Atmel Reset Controller driver"
				233	depends on DM_RESET && ARCH_AT91
				234	help
				235	This enables the Reset Controller driver support for Microchip/Atmel
				236	SoCs. Mainly used to expose assert/deassert methods to other drivers
				237	that require it.
Stephen Warren	89c1e2d	2016-06-17 09:43:58 -0600	[diff] [blame]	238	endmenu