blob: e45ba584e0236750dd81cebecdead38c220456bb [file] [log] [blame]
Fabian Vogt46025582016-09-26 14:26:47 +02001#include <dt-bindings/pinctrl/bcm2835.h>
2#include <dt-bindings/clock/bcm2835.h>
3#include <dt-bindings/clock/bcm2835-aux.h>
4#include <dt-bindings/gpio/gpio.h>
5
Alexander Graf409f05f2017-10-04 14:39:16 +02006/* firmware-provided startup stubs live here, where the secondary CPUs are
7 * spinning.
8 */
9/memreserve/ 0x00000000 0x00001000;
10
Fabian Vogt46025582016-09-26 14:26:47 +020011/* This include file covers the common peripherals and configuration between
12 * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
13 * bcm2835.dtsi and bcm2836.dtsi.
14 */
15
16/ {
17 compatible = "brcm,bcm2835";
18 model = "BCM2835";
19 interrupt-parent = <&intc>;
20 #address-cells = <1>;
21 #size-cells = <1>;
22
23 chosen {
24 bootargs = "earlyprintk console=ttyAMA0";
25 };
26
Alexander Graf409f05f2017-10-04 14:39:16 +020027 thermal-zones {
28 cpu_thermal: cpu-thermal {
29 polling-delay-passive = <0>;
30 polling-delay = <1000>;
31
32 thermal-sensors = <&thermal>;
33
34 trips {
35 cpu-crit {
36 temperature = <80000>;
37 hysteresis = <0>;
38 type = "critical";
39 };
40 };
41
42 cooling-maps {
43 };
44 };
45 };
46
Fabian Vogtff5d7ae2016-09-26 14:26:48 +020047 soc: soc {
Fabian Vogt46025582016-09-26 14:26:47 +020048 compatible = "simple-bus";
49 #address-cells = <1>;
50 #size-cells = <1>;
51
52 timer@7e003000 {
53 compatible = "brcm,bcm2835-system-timer";
54 reg = <0x7e003000 0x1000>;
55 interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
56 /* This could be a reference to BCM2835_CLOCK_TIMER,
57 * but we don't have the driver using the common clock
58 * support yet.
59 */
60 clock-frequency = <1000000>;
61 };
62
63 dma: dma@7e007000 {
64 compatible = "brcm,bcm2835-dma";
65 reg = <0x7e007000 0xf00>;
66 interrupts = <1 16>,
67 <1 17>,
68 <1 18>,
69 <1 19>,
70 <1 20>,
71 <1 21>,
72 <1 22>,
73 <1 23>,
74 <1 24>,
75 <1 25>,
76 <1 26>,
77 /* dma channel 11-14 share one irq */
78 <1 27>,
79 <1 27>,
80 <1 27>,
81 <1 27>,
82 /* unused shared irq for all channels */
83 <1 28>;
84 interrupt-names = "dma0",
85 "dma1",
86 "dma2",
87 "dma3",
88 "dma4",
89 "dma5",
90 "dma6",
91 "dma7",
92 "dma8",
93 "dma9",
94 "dma10",
95 "dma11",
96 "dma12",
97 "dma13",
98 "dma14",
99 "dma-shared-all";
100 #dma-cells = <1>;
101 brcm,dma-channel-mask = <0x7f35>;
102 };
103
104 intc: interrupt-controller@7e00b200 {
105 compatible = "brcm,bcm2835-armctrl-ic";
106 reg = <0x7e00b200 0x200>;
107 interrupt-controller;
108 #interrupt-cells = <2>;
109 };
110
111 watchdog@7e100000 {
112 compatible = "brcm,bcm2835-pm-wdt";
113 reg = <0x7e100000 0x28>;
114 };
115
116 clocks: cprman@7e101000 {
117 compatible = "brcm,bcm2835-cprman";
118 #clock-cells = <1>;
119 reg = <0x7e101000 0x2000>;
120
Alexander Graf409f05f2017-10-04 14:39:16 +0200121 /* CPRMAN derives almost everything from the
122 * platform's oscillator. However, the DSI
123 * pixel clocks come from the DSI analog PHY.
Fabian Vogt46025582016-09-26 14:26:47 +0200124 */
Alexander Graf409f05f2017-10-04 14:39:16 +0200125 clocks = <&clk_osc>,
126 <&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
127 <&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
Fabian Vogt46025582016-09-26 14:26:47 +0200128 };
129
130 rng@7e104000 {
131 compatible = "brcm,bcm2835-rng";
132 reg = <0x7e104000 0x10>;
133 };
134
Alexander Graf409f05f2017-10-04 14:39:16 +0200135 mailbox: mailbox@7e00b880 {
Fabian Vogt46025582016-09-26 14:26:47 +0200136 compatible = "brcm,bcm2835-mbox";
137 reg = <0x7e00b880 0x40>;
138 interrupts = <0 1>;
139 #mbox-cells = <0>;
140 };
141
142 gpio: gpio@7e200000 {
143 compatible = "brcm,bcm2835-gpio";
144 reg = <0x7e200000 0xb4>;
145 /*
146 * The GPIO IP block is designed for 3 banks of GPIOs.
147 * Each bank has a GPIO interrupt for itself.
148 * There is an overall "any bank" interrupt.
149 * In order, these are GIC interrupts 17, 18, 19, 20.
150 * Since the BCM2835 only has 2 banks, the 2nd bank
151 * interrupt output appears to be mirrored onto the
152 * 3rd bank's interrupt signal.
153 * So, a bank0 interrupt shows up on 17, 20, and
154 * a bank1 interrupt shows up on 18, 19, 20!
155 */
156 interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
157
158 gpio-controller;
159 #gpio-cells = <2>;
160
161 interrupt-controller;
162 #interrupt-cells = <2>;
Alexander Graf409f05f2017-10-04 14:39:16 +0200163
164 /* Defines pin muxing groups according to
165 * BCM2835-ARM-Peripherals.pdf page 102.
166 *
167 * While each pin can have its mux selected
168 * for various functions individually, some
169 * groups only make sense to switch to a
170 * particular function together.
171 */
172 dpi_gpio0: dpi_gpio0 {
173 brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
174 12 13 14 15 16 17 18 19
175 20 21 22 23 24 25 26 27>;
176 brcm,function = <BCM2835_FSEL_ALT2>;
177 };
178 emmc_gpio22: emmc_gpio22 {
179 brcm,pins = <22 23 24 25 26 27>;
180 brcm,function = <BCM2835_FSEL_ALT3>;
181 };
182 emmc_gpio34: emmc_gpio34 {
183 brcm,pins = <34 35 36 37 38 39>;
184 brcm,function = <BCM2835_FSEL_ALT3>;
185 brcm,pull = <BCM2835_PUD_OFF
186 BCM2835_PUD_UP
187 BCM2835_PUD_UP
188 BCM2835_PUD_UP
189 BCM2835_PUD_UP
190 BCM2835_PUD_UP>;
191 };
192 emmc_gpio48: emmc_gpio48 {
193 brcm,pins = <48 49 50 51 52 53>;
194 brcm,function = <BCM2835_FSEL_ALT3>;
195 };
196
197 gpclk0_gpio4: gpclk0_gpio4 {
198 brcm,pins = <4>;
199 brcm,function = <BCM2835_FSEL_ALT0>;
200 };
201 gpclk1_gpio5: gpclk1_gpio5 {
202 brcm,pins = <5>;
203 brcm,function = <BCM2835_FSEL_ALT0>;
204 };
205 gpclk1_gpio42: gpclk1_gpio42 {
206 brcm,pins = <42>;
207 brcm,function = <BCM2835_FSEL_ALT0>;
208 };
209 gpclk1_gpio44: gpclk1_gpio44 {
210 brcm,pins = <44>;
211 brcm,function = <BCM2835_FSEL_ALT0>;
212 };
213 gpclk2_gpio6: gpclk2_gpio6 {
214 brcm,pins = <6>;
215 brcm,function = <BCM2835_FSEL_ALT0>;
216 };
217 gpclk2_gpio43: gpclk2_gpio43 {
218 brcm,pins = <43>;
219 brcm,function = <BCM2835_FSEL_ALT0>;
220 };
221
222 i2c0_gpio0: i2c0_gpio0 {
223 brcm,pins = <0 1>;
224 brcm,function = <BCM2835_FSEL_ALT0>;
225 };
226 i2c0_gpio28: i2c0_gpio28 {
227 brcm,pins = <28 29>;
228 brcm,function = <BCM2835_FSEL_ALT0>;
229 };
230 i2c0_gpio44: i2c0_gpio44 {
231 brcm,pins = <44 45>;
232 brcm,function = <BCM2835_FSEL_ALT1>;
233 };
234 i2c1_gpio2: i2c1_gpio2 {
235 brcm,pins = <2 3>;
236 brcm,function = <BCM2835_FSEL_ALT0>;
237 };
238 i2c1_gpio44: i2c1_gpio44 {
239 brcm,pins = <44 45>;
240 brcm,function = <BCM2835_FSEL_ALT2>;
241 };
242 i2c_slave_gpio18: i2c_slave_gpio18 {
243 brcm,pins = <18 19 20 21>;
244 brcm,function = <BCM2835_FSEL_ALT3>;
245 };
246
247 jtag_gpio4: jtag_gpio4 {
248 brcm,pins = <4 5 6 12 13>;
Henry Zhanga8798a62017-12-18 00:13:30 -0800249 brcm,function = <BCM2835_FSEL_ALT5>;
Alexander Graf409f05f2017-10-04 14:39:16 +0200250 };
251 jtag_gpio22: jtag_gpio22 {
252 brcm,pins = <22 23 24 25 26 27>;
253 brcm,function = <BCM2835_FSEL_ALT4>;
254 };
255
256 pcm_gpio18: pcm_gpio18 {
257 brcm,pins = <18 19 20 21>;
258 brcm,function = <BCM2835_FSEL_ALT0>;
259 };
260 pcm_gpio28: pcm_gpio28 {
261 brcm,pins = <28 29 30 31>;
262 brcm,function = <BCM2835_FSEL_ALT2>;
263 };
264
265 pwm0_gpio12: pwm0_gpio12 {
266 brcm,pins = <12>;
267 brcm,function = <BCM2835_FSEL_ALT0>;
268 };
269 pwm0_gpio18: pwm0_gpio18 {
270 brcm,pins = <18>;
271 brcm,function = <BCM2835_FSEL_ALT5>;
272 };
273 pwm0_gpio40: pwm0_gpio40 {
274 brcm,pins = <40>;
275 brcm,function = <BCM2835_FSEL_ALT0>;
276 };
277 pwm1_gpio13: pwm1_gpio13 {
278 brcm,pins = <13>;
279 brcm,function = <BCM2835_FSEL_ALT0>;
280 };
281 pwm1_gpio19: pwm1_gpio19 {
282 brcm,pins = <19>;
283 brcm,function = <BCM2835_FSEL_ALT5>;
284 };
285 pwm1_gpio41: pwm1_gpio41 {
286 brcm,pins = <41>;
287 brcm,function = <BCM2835_FSEL_ALT0>;
288 };
289 pwm1_gpio45: pwm1_gpio45 {
290 brcm,pins = <45>;
291 brcm,function = <BCM2835_FSEL_ALT0>;
292 };
293
294 sdhost_gpio48: sdhost_gpio48 {
295 brcm,pins = <48 49 50 51 52 53>;
296 brcm,function = <BCM2835_FSEL_ALT0>;
297 };
298
299 spi0_gpio7: spi0_gpio7 {
300 brcm,pins = <7 8 9 10 11>;
301 brcm,function = <BCM2835_FSEL_ALT0>;
302 };
303 spi0_gpio35: spi0_gpio35 {
304 brcm,pins = <35 36 37 38 39>;
305 brcm,function = <BCM2835_FSEL_ALT0>;
306 };
307 spi1_gpio16: spi1_gpio16 {
308 brcm,pins = <16 17 18 19 20 21>;
309 brcm,function = <BCM2835_FSEL_ALT4>;
310 };
311 spi2_gpio40: spi2_gpio40 {
312 brcm,pins = <40 41 42 43 44 45>;
313 brcm,function = <BCM2835_FSEL_ALT4>;
314 };
315
316 uart0_gpio14: uart0_gpio14 {
317 brcm,pins = <14 15>;
318 brcm,function = <BCM2835_FSEL_ALT0>;
319 };
320 /* Separate from the uart0_gpio14 group
321 * because it conflicts with spi1_gpio16, and
322 * people often run uart0 on the two pins
323 * without flow control.
324 */
325 uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
326 brcm,pins = <16 17>;
327 brcm,function = <BCM2835_FSEL_ALT3>;
328 };
329 uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
330 brcm,pins = <30 31>;
331 brcm,function = <BCM2835_FSEL_ALT3>;
332 };
333 uart0_gpio32: uart0_gpio32 {
334 brcm,pins = <32 33>;
335 brcm,function = <BCM2835_FSEL_ALT3>;
336 };
337 uart0_gpio36: uart0_gpio36 {
338 brcm,pins = <36 37>;
339 brcm,function = <BCM2835_FSEL_ALT2>;
340 };
341 uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
342 brcm,pins = <38 39>;
343 brcm,function = <BCM2835_FSEL_ALT2>;
344 };
345
346 uart1_gpio14: uart1_gpio14 {
347 brcm,pins = <14 15>;
348 brcm,function = <BCM2835_FSEL_ALT5>;
349 };
350 uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
351 brcm,pins = <16 17>;
352 brcm,function = <BCM2835_FSEL_ALT5>;
353 };
354 uart1_gpio32: uart1_gpio32 {
355 brcm,pins = <32 33>;
356 brcm,function = <BCM2835_FSEL_ALT5>;
357 };
358 uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
359 brcm,pins = <30 31>;
360 brcm,function = <BCM2835_FSEL_ALT5>;
361 };
362 uart1_gpio40: uart1_gpio40 {
363 brcm,pins = <40 41>;
364 brcm,function = <BCM2835_FSEL_ALT5>;
365 };
366 uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
367 brcm,pins = <42 43>;
368 brcm,function = <BCM2835_FSEL_ALT5>;
369 };
Fabian Vogt46025582016-09-26 14:26:47 +0200370 };
371
372 uart0: serial@7e201000 {
373 compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
374 reg = <0x7e201000 0x1000>;
375 interrupts = <2 25>;
376 clocks = <&clocks BCM2835_CLOCK_UART>,
377 <&clocks BCM2835_CLOCK_VPU>;
378 clock-names = "uartclk", "apb_pclk";
379 arm,primecell-periphid = <0x00241011>;
380 };
381
Alexander Graf409f05f2017-10-04 14:39:16 +0200382 sdhost: mmc@7e202000 {
383 compatible = "brcm,bcm2835-sdhost";
384 reg = <0x7e202000 0x100>;
385 interrupts = <2 24>;
386 clocks = <&clocks BCM2835_CLOCK_VPU>;
387 dmas = <&dma 13>;
388 dma-names = "rx-tx";
389 status = "disabled";
390 };
391
Fabian Vogt46025582016-09-26 14:26:47 +0200392 i2s: i2s@7e203000 {
393 compatible = "brcm,bcm2835-i2s";
394 reg = <0x7e203000 0x20>,
395 <0x7e101098 0x02>;
396
397 dmas = <&dma 2>,
398 <&dma 3>;
399 dma-names = "tx", "rx";
400 status = "disabled";
401 };
402
403 spi: spi@7e204000 {
404 compatible = "brcm,bcm2835-spi";
405 reg = <0x7e204000 0x1000>;
406 interrupts = <2 22>;
407 clocks = <&clocks BCM2835_CLOCK_VPU>;
408 #address-cells = <1>;
409 #size-cells = <0>;
410 status = "disabled";
411 };
412
413 i2c0: i2c@7e205000 {
414 compatible = "brcm,bcm2835-i2c";
415 reg = <0x7e205000 0x1000>;
416 interrupts = <2 21>;
417 clocks = <&clocks BCM2835_CLOCK_VPU>;
418 #address-cells = <1>;
419 #size-cells = <0>;
420 status = "disabled";
421 };
422
423 pixelvalve@7e206000 {
424 compatible = "brcm,bcm2835-pixelvalve0";
425 reg = <0x7e206000 0x100>;
426 interrupts = <2 13>; /* pwa0 */
427 };
428
429 pixelvalve@7e207000 {
430 compatible = "brcm,bcm2835-pixelvalve1";
431 reg = <0x7e207000 0x100>;
432 interrupts = <2 14>; /* pwa1 */
433 };
434
Alexander Graf409f05f2017-10-04 14:39:16 +0200435 dsi0: dsi@7e209000 {
436 compatible = "brcm,bcm2835-dsi0";
437 reg = <0x7e209000 0x78>;
438 interrupts = <2 4>;
439 #address-cells = <1>;
440 #size-cells = <0>;
441 #clock-cells = <1>;
442
443 clocks = <&clocks BCM2835_PLLA_DSI0>,
444 <&clocks BCM2835_CLOCK_DSI0E>,
445 <&clocks BCM2835_CLOCK_DSI0P>;
446 clock-names = "phy", "escape", "pixel";
447
448 clock-output-names = "dsi0_byte",
449 "dsi0_ddr2",
450 "dsi0_ddr";
451
452 };
453
454 thermal: thermal@7e212000 {
455 compatible = "brcm,bcm2835-thermal";
456 reg = <0x7e212000 0x8>;
457 clocks = <&clocks BCM2835_CLOCK_TSENS>;
458 #thermal-sensor-cells = <0>;
459 status = "disabled";
460 };
461
Fabian Vogt46025582016-09-26 14:26:47 +0200462 aux: aux@0x7e215000 {
463 compatible = "brcm,bcm2835-aux";
464 #clock-cells = <1>;
465 reg = <0x7e215000 0x8>;
466 clocks = <&clocks BCM2835_CLOCK_VPU>;
467 };
468
469 uart1: serial@7e215040 {
470 compatible = "brcm,bcm2835-aux-uart";
471 reg = <0x7e215040 0x40>;
472 interrupts = <1 29>;
473 clocks = <&aux BCM2835_AUX_CLOCK_UART>;
474 status = "disabled";
475 };
476
477 spi1: spi@7e215080 {
478 compatible = "brcm,bcm2835-aux-spi";
479 reg = <0x7e215080 0x40>;
480 interrupts = <1 29>;
481 clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
482 #address-cells = <1>;
483 #size-cells = <0>;
484 status = "disabled";
485 };
486
487 spi2: spi@7e2150c0 {
488 compatible = "brcm,bcm2835-aux-spi";
489 reg = <0x7e2150c0 0x40>;
490 interrupts = <1 29>;
491 clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
492 #address-cells = <1>;
493 #size-cells = <0>;
494 status = "disabled";
495 };
496
497 pwm: pwm@7e20c000 {
498 compatible = "brcm,bcm2835-pwm";
499 reg = <0x7e20c000 0x28>;
500 clocks = <&clocks BCM2835_CLOCK_PWM>;
501 assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
502 assigned-clock-rates = <10000000>;
503 #pwm-cells = <2>;
504 status = "disabled";
505 };
506
507 sdhci: sdhci@7e300000 {
508 compatible = "brcm,bcm2835-sdhci";
509 reg = <0x7e300000 0x100>;
510 interrupts = <2 30>;
511 clocks = <&clocks BCM2835_CLOCK_EMMC>;
512 status = "disabled";
513 };
514
515 hvs@7e400000 {
516 compatible = "brcm,bcm2835-hvs";
517 reg = <0x7e400000 0x6000>;
518 interrupts = <2 1>;
519 };
520
Alexander Graf409f05f2017-10-04 14:39:16 +0200521 dsi1: dsi@7e700000 {
522 compatible = "brcm,bcm2835-dsi1";
523 reg = <0x7e700000 0x8c>;
524 interrupts = <2 12>;
525 #address-cells = <1>;
526 #size-cells = <0>;
527 #clock-cells = <1>;
528
529 clocks = <&clocks BCM2835_PLLD_DSI1>,
530 <&clocks BCM2835_CLOCK_DSI1E>,
531 <&clocks BCM2835_CLOCK_DSI1P>;
532 clock-names = "phy", "escape", "pixel";
533
534 clock-output-names = "dsi1_byte",
535 "dsi1_ddr2",
536 "dsi1_ddr";
537
538 status = "disabled";
539 };
540
Fabian Vogt46025582016-09-26 14:26:47 +0200541 i2c1: i2c@7e804000 {
542 compatible = "brcm,bcm2835-i2c";
543 reg = <0x7e804000 0x1000>;
544 interrupts = <2 21>;
545 clocks = <&clocks BCM2835_CLOCK_VPU>;
546 #address-cells = <1>;
547 #size-cells = <0>;
548 status = "disabled";
549 };
550
551 i2c2: i2c@7e805000 {
552 compatible = "brcm,bcm2835-i2c";
553 reg = <0x7e805000 0x1000>;
554 interrupts = <2 21>;
555 clocks = <&clocks BCM2835_CLOCK_VPU>;
556 #address-cells = <1>;
557 #size-cells = <0>;
558 status = "disabled";
559 };
560
Alexander Graf409f05f2017-10-04 14:39:16 +0200561 vec: vec@7e806000 {
562 compatible = "brcm,bcm2835-vec";
563 reg = <0x7e806000 0x1000>;
564 clocks = <&clocks BCM2835_CLOCK_VEC>;
565 interrupts = <2 27>;
566 status = "disabled";
567 };
568
Fabian Vogt46025582016-09-26 14:26:47 +0200569 pixelvalve@7e807000 {
570 compatible = "brcm,bcm2835-pixelvalve2";
571 reg = <0x7e807000 0x100>;
572 interrupts = <2 10>; /* pixelvalve */
573 };
574
575 hdmi: hdmi@7e902000 {
576 compatible = "brcm,bcm2835-hdmi";
577 reg = <0x7e902000 0x600>,
578 <0x7e808000 0x100>;
579 interrupts = <2 8>, <2 9>;
580 ddc = <&i2c2>;
581 clocks = <&clocks BCM2835_PLLH_PIX>,
582 <&clocks BCM2835_CLOCK_HSM>;
583 clock-names = "pixel", "hdmi";
Alexander Graf409f05f2017-10-04 14:39:16 +0200584 dmas = <&dma 17>;
585 dma-names = "audio-rx";
Fabian Vogt46025582016-09-26 14:26:47 +0200586 status = "disabled";
587 };
588
589 usb: usb@7e980000 {
590 compatible = "brcm,bcm2835-usb";
591 reg = <0x7e980000 0x10000>;
592 interrupts = <1 9>;
593 #address-cells = <1>;
594 #size-cells = <0>;
Alexander Graf409f05f2017-10-04 14:39:16 +0200595 clocks = <&clk_usb>;
596 clock-names = "otg";
597 phys = <&usbphy>;
598 phy-names = "usb2-phy";
Fabian Vogt46025582016-09-26 14:26:47 +0200599 };
600
601 v3d: v3d@7ec00000 {
602 compatible = "brcm,bcm2835-v3d";
603 reg = <0x7ec00000 0x1000>;
604 interrupts = <1 10>;
605 };
606
607 vc4: gpu {
608 compatible = "brcm,bcm2835-vc4";
609 };
610 };
611
612 clocks {
613 compatible = "simple-bus";
614 #address-cells = <1>;
615 #size-cells = <0>;
616
617 /* The oscillator is the root of the clock tree. */
618 clk_osc: clock@3 {
619 compatible = "fixed-clock";
620 reg = <3>;
621 #clock-cells = <0>;
622 clock-output-names = "osc";
623 clock-frequency = <19200000>;
624 };
625
Alexander Graf409f05f2017-10-04 14:39:16 +0200626 clk_usb: clock@4 {
627 compatible = "fixed-clock";
628 reg = <4>;
629 #clock-cells = <0>;
630 clock-output-names = "otg";
631 clock-frequency = <480000000>;
632 };
633 };
634
635 usbphy: phy {
636 compatible = "usb-nop-xceiv";
Fabian Vogt46025582016-09-26 14:26:47 +0200637 };
638};
Fabian Vogtff5d7ae2016-09-26 14:26:48 +0200639
640#include "bcm283x-uboot.dtsi"