Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 2 | /* |
Marcel Ziswiler | 1874cdd | 2019-02-08 18:42:06 +0100 | [diff] [blame] | 3 | * Copyright 2013-2019 Toradex, Inc. |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 4 | * |
| 5 | * Configuration settings for the Toradex Colibri iMX6 |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #ifndef __CONFIG_H |
| 9 | #define __CONFIG_H |
| 10 | |
| 11 | #include "mx6_common.h" |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 12 | |
| 13 | #undef CONFIG_DISPLAY_BOARDINFO |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 14 | |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 15 | #include <asm/arch/imx-regs.h> |
Stefano Babic | 552a848 | 2017-06-29 10:16:06 +0200 | [diff] [blame] | 16 | #include <asm/mach-imx/gpio.h> |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 17 | |
| 18 | #ifdef CONFIG_SPL |
| 19 | #include "imx6_spl.h" |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 20 | #endif |
| 21 | |
| 22 | #define CONFIG_CMDLINE_TAG |
| 23 | #define CONFIG_SETUP_MEMORY_TAGS |
| 24 | #define CONFIG_INITRD_TAG |
| 25 | #define CONFIG_REVISION_TAG |
| 26 | #define CONFIG_SERIAL_TAG |
| 27 | |
| 28 | /* Size of malloc() pool */ |
| 29 | #define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024) |
| 30 | |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 31 | #define CONFIG_MXC_UART |
| 32 | #define CONFIG_MXC_UART_BASE UART1_BASE |
| 33 | |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 34 | /* I2C Configs */ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 35 | #define CONFIG_SYS_I2C_MXC |
Marcel Ziswiler | 6eea69b | 2019-02-08 18:42:12 +0100 | [diff] [blame] | 36 | #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ |
| 37 | #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ |
| 38 | #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 39 | #define CONFIG_SYS_I2C_SPEED 100000 |
Marcel Ziswiler | 6eea69b | 2019-02-08 18:42:12 +0100 | [diff] [blame] | 40 | #define CONFIG_SYS_MXC_I2C3_SPEED 400000 |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 41 | |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 42 | /* MMC Configs */ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 43 | #define CONFIG_FSL_USDHC |
| 44 | #define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
| 45 | #define CONFIG_SYS_FSL_USDHC_NUM 2 |
| 46 | |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 47 | /* Network */ |
| 48 | #define CONFIG_FEC_MXC |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 49 | #define IMX_FEC_BASE ENET_BASE_ADDR |
| 50 | #define CONFIG_FEC_XCV_TYPE RMII |
| 51 | #define CONFIG_ETHPRIME "FEC" |
| 52 | #define CONFIG_FEC_MXC_PHYADDR 1 |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 53 | #define CONFIG_IP_DEFRAG |
| 54 | #define CONFIG_TFTP_BLOCKSIZE 16352 |
| 55 | #define CONFIG_TFTP_TSIZE |
| 56 | |
| 57 | /* USB Configs */ |
| 58 | /* Host */ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 59 | #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 |
| 60 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ |
| 61 | #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
| 62 | #define CONFIG_MXC_USB_FLAGS 0 |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 63 | /* Client */ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 64 | #define CONFIG_USBD_HS |
| 65 | |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 66 | /* Framebuffer and LCD */ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 67 | #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE |
| 68 | #define CONFIG_VIDEO_BMP_RLE8 |
| 69 | #define CONFIG_SPLASH_SCREEN |
| 70 | #define CONFIG_SPLASH_SCREEN_ALIGN |
| 71 | #define CONFIG_BMP_16BPP |
| 72 | #define CONFIG_VIDEO_LOGO |
| 73 | #define CONFIG_VIDEO_BMP_LOGO |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 74 | #define CONFIG_CONSOLE_MUX |
| 75 | #define CONFIG_IMX_HDMI |
| 76 | #define CONFIG_IMX_VIDEO_SKIP |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 77 | |
| 78 | /* allow to overwrite serial and ethaddr */ |
| 79 | #define CONFIG_ENV_OVERWRITE |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 80 | |
| 81 | /* Command definition */ |
| 82 | #undef CONFIG_CMD_LOADB |
| 83 | #undef CONFIG_CMD_LOADS |
| 84 | #undef CONFIG_CMD_NFS |
| 85 | #undef CONFIG_CMD_FLASH |
| 86 | |
| 87 | #undef CONFIG_IPADDR |
| 88 | #define CONFIG_IPADDR 192.168.10.2 |
| 89 | #define CONFIG_NETMASK 255.255.255.0 |
| 90 | #undef CONFIG_SERVERIP |
| 91 | #define CONFIG_SERVERIP 192.168.10.1 |
| 92 | |
| 93 | #define CONFIG_LOADADDR 0x12000000 |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 94 | |
Stefan Agner | e85a536 | 2019-02-08 18:42:18 +0100 | [diff] [blame] | 95 | #ifndef CONFIG_SPL_BUILD |
| 96 | #define BOOT_TARGET_DEVICES(func) \ |
| 97 | func(MMC, mmc, 1) \ |
| 98 | func(USB, usb, 0) \ |
| 99 | func(DHCP, dhcp, na) |
| 100 | #include <config_distro_bootcmd.h> |
| 101 | #undef BOOTENV_RUN_NET_USB_START |
| 102 | #define BOOTENV_RUN_NET_USB_START "" |
Bhuvanchandra DV | 84b2ee3 | 2019-02-08 18:42:27 +0100 | [diff] [blame] | 103 | #else /* CONFIG_SPL_BUILD */ |
Stefan Agner | e85a536 | 2019-02-08 18:42:18 +0100 | [diff] [blame] | 104 | #define BOOTENV |
Bhuvanchandra DV | 84b2ee3 | 2019-02-08 18:42:27 +0100 | [diff] [blame] | 105 | #endif /* CONFIG_SPL_BUILD */ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 106 | |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 107 | #define DFU_ALT_EMMC_INFO \ |
| 108 | "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \ |
| 109 | "boot part 0 1;" \ |
| 110 | "rootfs part 0 2;" \ |
Bhuvanchandra DV | 84b2ee3 | 2019-02-08 18:42:27 +0100 | [diff] [blame] | 111 | "zImage fat 0 1;" \ |
| 112 | "imx6dl-colibri-eval-v3.dtb fat 0 1;" \ |
| 113 | "imx6dl-colibri-cam-eval-v3.dtb fat 0 1" |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 114 | |
| 115 | #define EMMC_BOOTCMD \ |
Igor Opaniuk | 0d3912f | 2019-04-15 11:01:57 +0200 | [diff] [blame] | 116 | "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} "\ |
| 117 | "rw,noatime rootfstype=ext4 " \ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 118 | "rootwait\0" \ |
Igor Opaniuk | 0d3912f | 2019-04-15 11:01:57 +0200 | [diff] [blame] | 119 | "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 120 | "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ |
| 121 | "${vidargs}; echo Booting from internal eMMC chip...; " \ |
Igor Opaniuk | 0d3912f | 2019-04-15 11:01:57 +0200 | [diff] [blame] | 122 | "run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \ |
| 123 | "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ |
Bhuvanchandra DV | 84b2ee3 | 2019-02-08 18:42:27 +0100 | [diff] [blame] | 124 | "bootz ${kernel_addr_r} ${dtbparam}\0" \ |
Igor Opaniuk | 0d3912f | 2019-04-15 11:01:57 +0200 | [diff] [blame] | 125 | "emmcbootpart=1\0" \ |
| 126 | "emmcdev=0\0" \ |
| 127 | "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \ |
| 128 | "${fdt_addr_r} ${fdt_file} && " \ |
| 129 | "setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \ |
| 130 | "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \ |
| 131 | "emmcrootpart=2\0" |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 132 | |
| 133 | #define MEM_LAYOUT_ENV_SETTINGS \ |
Stefan Agner | 9af131e | 2017-03-09 17:17:51 -0800 | [diff] [blame] | 134 | "bootm_size=0x10000000\0" \ |
Stefan Agner | ce30382 | 2019-04-09 17:24:10 +0200 | [diff] [blame] | 135 | "fdt_addr_r=0x12100000\0" \ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 136 | "fdt_high=0xffffffff\0" \ |
| 137 | "initrd_high=0xffffffff\0" \ |
| 138 | "kernel_addr_r=0x11000000\0" \ |
Stefan Agner | e85a536 | 2019-02-08 18:42:18 +0100 | [diff] [blame] | 139 | "pxefile_addr_r=0x17100000\0" \ |
Stefan Agner | ce30382 | 2019-04-09 17:24:10 +0200 | [diff] [blame] | 140 | "ramdisk_addr_r=0x12200000\0" \ |
Stefan Agner | e85a536 | 2019-02-08 18:42:18 +0100 | [diff] [blame] | 141 | "scriptaddr=0x17000000\0" |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 142 | |
| 143 | #define NFS_BOOTCMD \ |
| 144 | "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ |
| 145 | "nfsboot=run setup; " \ |
| 146 | "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \ |
| 147 | "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ |
| 148 | "run nfsdtbload; dhcp ${kernel_addr_r} " \ |
Bhuvanchandra DV | 84b2ee3 | 2019-02-08 18:42:27 +0100 | [diff] [blame] | 149 | "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 150 | "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \ |
| 151 | "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0" |
| 152 | |
Bhuvanchandra DV | 84b2ee3 | 2019-02-08 18:42:27 +0100 | [diff] [blame] | 153 | #define SD_BOOTCMD \ |
Igor Opaniuk | 0d3912f | 2019-04-15 11:01:57 +0200 | [diff] [blame] | 154 | "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} rw,noatime " \ |
| 155 | "rootfstype=ext4 rootwait\0" \ |
| 156 | "sdboot=run setup; run sdfinduuid; run set_sdargs; " \ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 157 | "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ |
| 158 | "${vidargs}; echo Booting from SD card; " \ |
Igor Opaniuk | 0d3912f | 2019-04-15 11:01:57 +0200 | [diff] [blame] | 159 | "run sddtbload; load mmc ${sddev}:${sdbootpart} "\ |
| 160 | "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ |
Bhuvanchandra DV | 84b2ee3 | 2019-02-08 18:42:27 +0100 | [diff] [blame] | 161 | "bootz ${kernel_addr_r} ${dtbparam}\0" \ |
Igor Opaniuk | 0d3912f | 2019-04-15 11:01:57 +0200 | [diff] [blame] | 162 | "sdbootpart=1\0" \ |
| 163 | "sddev=1\0" \ |
| 164 | "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \ |
| 165 | "${fdt_addr_r} ${fdt_file} && setenv dtbparam \" - " \ |
| 166 | "${fdt_addr_r}\" && true\0" \ |
| 167 | "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \ |
| 168 | "sdrootpart=2\0" |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 169 | |
| 170 | #define USB_BOOTCMD \ |
Igor Opaniuk | 0d3912f | 2019-04-15 11:01:57 +0200 | [diff] [blame] | 171 | "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} rw,noatime " \ |
| 172 | "rootfstype=ext4 rootwait\0" \ |
| 173 | "usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \ |
| 174 | "setenv bootargs ${defargs} ${setupargs} " \ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 175 | "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ |
Igor Opaniuk | 0d3912f | 2019-04-15 11:01:57 +0200 | [diff] [blame] | 176 | "run usbdtbload; " \ |
| 177 | "load usb ${usbdev}:${usbbootpart} ${kernel_addr_r} " \ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 178 | "${boot_file} && run fdt_fixup && " \ |
Bhuvanchandra DV | 84b2ee3 | 2019-02-08 18:42:27 +0100 | [diff] [blame] | 179 | "bootz ${kernel_addr_r} ${dtbparam}\0" \ |
Igor Opaniuk | 0d3912f | 2019-04-15 11:01:57 +0200 | [diff] [blame] | 180 | "usbbootpart=1\0" \ |
| 181 | "usbdev=0\0" \ |
| 182 | "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \ |
| 183 | "${fdt_addr_r} " \ |
| 184 | "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && " \ |
| 185 | "true\0" \ |
| 186 | "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \ |
| 187 | "usbrootpart=2\0" |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 188 | |
| 189 | #define FDT_FILE "imx6dl-colibri-eval-v3.dtb" |
| 190 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
Stefan Agner | e85a536 | 2019-02-08 18:42:18 +0100 | [diff] [blame] | 191 | BOOTENV \ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 192 | "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ |
Stefan Agner | e85a536 | 2019-02-08 18:42:18 +0100 | [diff] [blame] | 193 | "run distro_bootcmd ; " \ |
| 194 | "usb start ; " \ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 195 | "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ |
Bhuvanchandra DV | 84b2ee3 | 2019-02-08 18:42:27 +0100 | [diff] [blame] | 196 | "boot_file=zImage\0" \ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 197 | "console=ttymxc0\0" \ |
| 198 | "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \ |
| 199 | "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ |
| 200 | EMMC_BOOTCMD \ |
| 201 | "fdt_file=" FDT_FILE "\0" \ |
| 202 | "fdt_fixup=;\0" \ |
| 203 | MEM_LAYOUT_ENV_SETTINGS \ |
| 204 | NFS_BOOTCMD \ |
| 205 | SD_BOOTCMD \ |
Igor Opaniuk | 0d3912f | 2019-04-15 11:01:57 +0200 | [diff] [blame] | 206 | USB_BOOTCMD \ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 207 | "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ |
| 208 | "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ |
| 209 | "flash_eth.img && source ${loadaddr}\0" \ |
| 210 | "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \ |
| 211 | "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ |
| 212 | "source ${loadaddr}\0" \ |
| 213 | "setup=setenv setupargs fec_mac=${ethaddr} " \ |
| 214 | "consoleblank=0 no_console_suspend=1 console=tty1 " \ |
| 215 | "console=${console},${baudrate}n8\0 " \ |
| 216 | "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ |
| 217 | "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \ |
| 218 | "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ |
| 219 | "source ${loadaddr}\0" \ |
| 220 | "splashpos=m,m\0" \ |
| 221 | "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \ |
| 222 | "video=mxcfb1:off fbmem=8M\0 " |
| 223 | |
| 224 | /* Miscellaneous configurable options */ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 225 | #undef CONFIG_SYS_CBSIZE |
| 226 | #define CONFIG_SYS_CBSIZE 1024 |
| 227 | #undef CONFIG_SYS_MAXARGS |
| 228 | #define CONFIG_SYS_MAXARGS 48 |
| 229 | |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 230 | #define CONFIG_SYS_MEMTEST_START 0x10000000 |
| 231 | #define CONFIG_SYS_MEMTEST_END 0x10010000 |
| 232 | #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 |
| 233 | |
| 234 | #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
| 235 | |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 236 | /* Physical Memory Map */ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 237 | #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |
| 238 | |
| 239 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM |
| 240 | #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
| 241 | #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
| 242 | |
| 243 | #define CONFIG_SYS_INIT_SP_OFFSET \ |
| 244 | (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| 245 | #define CONFIG_SYS_INIT_SP_ADDR \ |
| 246 | (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) |
| 247 | |
Masahiro Yamada | e856bdc | 2017-02-11 22:43:54 +0900 | [diff] [blame] | 248 | /* environment organization */ |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 249 | #define CONFIG_ENV_SIZE (8 * 1024) |
| 250 | |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 251 | #if defined(CONFIG_ENV_IS_IN_MMC) |
| 252 | /* Environment in eMMC, before config block at the end of 1st "boot sector" */ |
| 253 | #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ |
| 254 | CONFIG_TDX_CFG_BLOCK_OFFSET) |
| 255 | #define CONFIG_SYS_MMC_ENV_DEV 0 |
| 256 | #define CONFIG_SYS_MMC_ENV_PART 1 |
| 257 | #endif |
| 258 | |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 259 | #define CONFIG_CMD_TIME |
| 260 | |
Max Krummenacher | a02d517 | 2016-11-30 19:43:09 +0100 | [diff] [blame] | 261 | #endif /* __CONFIG_H */ |