blob: 637fd7d4f89b80bb1c2a08decaa00965f6937e5f [file] [log] [blame]
Wolfgang Denkba94a1b2006-05-30 15:56:48 +02001/*
2 * (C) Copyright 2005-2006
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * (C) Copyright 2003
6 * Martijn de Gouw, Prodrive B.V., martijn.de.gouw@prodrive.nl
7 *
8 * Configuation settings for the IXDPG425 board.
9 *
10 * See file CREDITS for list of people who contributed to this
11 * project.
12 *
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License as
15 * published by the Free Software Foundation; either version 2 of
16 * the License, or (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26 * MA 02111-1307 USA
27 */
28
29#ifndef __CONFIG_H
30#define __CONFIG_H
31
32/*
33 * High Level Configuration Options
34 * (easy to change)
35 */
36#define CONFIG_IXP425 1 /* This is an IXP425 CPU */
37#define CONFIG_IXDPG425 1 /* on an IXDPG425 Board */
38
39#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */
40#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */
41
42/*
43 * Ethernet
44 */
45#define CONFIG_IXP4XX_NPE 1 /* include IXP4xx NPE support */
46#define CONFIG_NET_MULTI 1
47#define CONFIG_PHY_ADDR 5 /* NPE0 PHY address */
48#define CONFIG_HAS_ETH1
49#define CONFIG_PHY1_ADDR 4 /* NPE1 PHY address */
50#define CONFIG_MII 1 /* MII PHY management */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020051#define CONFIG_SYS_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +020052
53/*
54 * Misc configuration options
55 */
56#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
57#define CONFIG_USE_IRQ 1 /* we need IRQ stuff for timer */
Jean-Christophe PLAGNIOL-VILLARDb54384e2009-05-15 23:47:02 +020058#define CONFIG_TIMER_IRQ
Wolfgang Denkba94a1b2006-05-30 15:56:48 +020059
60#define CONFIG_BOOTCOUNT_LIMIT /* support for bootcount limit */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020061#define CONFIG_SYS_BOOTCOUNT_ADDR 0x60003000 /* inside qmrg sram */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +020062
63#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
64#define CONFIG_SETUP_MEMORY_TAGS 1
65#define CONFIG_INITRD_TAG 1
66
67/*
68 * Size of malloc() pool
69 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020070#define CONFIG_SYS_MALLOC_LEN (256 << 10)
Wolfgang Denkba94a1b2006-05-30 15:56:48 +020071
72/* allow to overwrite serial and ethaddr */
73#define CONFIG_ENV_OVERWRITE
74
Jean-Christophe PLAGNIOL-VILLARD930590f2009-01-31 09:10:48 +010075#define CONFIG_IXP_SERIAL
Wolfgang Denkba94a1b2006-05-30 15:56:48 +020076#define CONFIG_BAUDRATE 115200
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020077#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +020078
Wolfgang Denkba94a1b2006-05-30 15:56:48 +020079
Jon Loeliger1d2c6bc2007-07-04 22:32:32 -050080/*
Jon Loeliger7f5c0152007-07-10 09:38:02 -050081 * BOOTP options
82 */
83#define CONFIG_BOOTP_BOOTFILESIZE
84#define CONFIG_BOOTP_BOOTPATH
85#define CONFIG_BOOTP_GATEWAY
86#define CONFIG_BOOTP_HOSTNAME
87
88
89/*
Jon Loeliger1d2c6bc2007-07-04 22:32:32 -050090 * Command line configuration.
91 */
92#include <config_cmd_default.h>
93
94#define CONFIG_CMD_DHCP
95#define CONFIG_CMD_ELF
96#define CONFIG_CMD_NET
97#define CONFIG_CMD_MII
98#define CONFIG_CMD_PING
99
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200100
101#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
102#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
103
104/*
105 * Miscellaneous configurable options
106 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200107#define CONFIG_SYS_LONGHELP /* undef to save memory */
108#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
109#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
110#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
111#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
112#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200113
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200114#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
115#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
116#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200117
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200118#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200119
120 /* valid baudrates */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200121#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200122
123/*
124 * Stack sizes
125 *
126 * The stack sizes are set up in start.S using the settings below
127 */
128#define CONFIG_STACKSIZE (128*1024) /* regular stack */
129#ifdef CONFIG_USE_IRQ
130#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
131#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
132#endif
133
134/***************************************************************
135 * Platform/Board specific defines start here.
136 ***************************************************************/
137
138/*-----------------------------------------------------------------------
139 * Default configuration (environment varibles...)
140 *----------------------------------------------------------------------*/
141#define CONFIG_PREBOOT "echo;" \
Wolfgang Denk32bf3d12008-03-03 12:16:44 +0100142 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200143 "echo"
144
145#undef CONFIG_BOOTARGS
146
147#define CONFIG_EXTRA_ENV_SETTINGS \
148 "netdev=eth0\0" \
149 "hostname=ixdpg425\0" \
150 "nfsargs=setenv bootargs root=/dev/nfs rw " \
151 "nfsroot=${serverip}:${rootpath}\0" \
152 "ramargs=setenv bootargs root=/dev/ram rw\0" \
153 "addip=setenv bootargs ${bootargs} " \
154 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
155 ":${hostname}:${netdev}:off panic=1\0" \
156 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
157 "flash_nfs=run nfsargs addip addtty;" \
158 "bootm ${kernel_addr}\0" \
159 "flash_self=run ramargs addip addtty;" \
160 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
161 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
162 "bootm\0" \
163 "rootpath=/opt/eldk/arm\0" \
164 "bootfile=/tftpboot/ixdpg425/uImage\0" \
165 "kernel_addr=50080000\0" \
166 "ramdisk_addr=50200000\0" \
167 "load=tftp 100000 /tftpboot/ixdpg425/u-boot.bin\0" \
168 "update=protect off 50000000 5003ffff;era 50000000 5003ffff;" \
169 "cp.b 100000 50000000 40000;" \
170 "setenv filesize;saveenv\0" \
Detlev Zundeld8ab58b2008-03-06 16:45:53 +0100171 "upd=run load update\0" \
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200172 ""
173#define CONFIG_BOOTCOMMAND "run net_nfs"
174
175/*
176 * Physical Memory Map
177 */
178#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 banks of DRAM */
179#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
180#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
181
182#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */
183#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */
184#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */
185#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */
186
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200187#define CONFIG_SYS_DRAM_BASE 0x00000000
188#define CONFIG_SYS_DRAM_SIZE 0x01000000
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200189
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200190#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
191#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
192#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200193
194/*
195 * Expansion bus settings
196 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200197#define CONFIG_SYS_EXP_CS0 0xbcd23c42
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200198
199/*
200 * SDRAM settings
201 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200202#define CONFIG_SYS_SDR_CONFIG 0x18
203#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
204#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200205
206/*
207 * FLASH and environment organization
208 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200209#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
210#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200211
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200212#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200213#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200214#define CONFIG_ENV_IS_IN_FLASH 1
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200215
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200216#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
217#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200218
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200219#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200220
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200221#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200222
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200223#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
224#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200225
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200226#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200227
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200228#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
229#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
230#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200231
232/* Address and size of Redundant Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200233#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
234#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200235
236/*
237 * GPIO settings
238 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200239#define CONFIG_SYS_GPIO_PCI_INTA_N 6
240#define CONFIG_SYS_GPIO_PCI_INTB_N 7
241#define CONFIG_SYS_GPIO_SWITCH_RESET_N 8
242#define CONFIG_SYS_GPIO_SLIC_RESET_N 13
243#define CONFIG_SYS_GPIO_PCI_CLK 14
244#define CONFIG_SYS_GPIO_EXTBUS_CLK 15
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200245
246/*
247 * Cache Configuration
248 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200249#define CONFIG_SYS_CACHELINE_SIZE 32
Wolfgang Denkba94a1b2006-05-30 15:56:48 +0200250
251#endif /* __CONFIG_H */