| Tony Dinh | b3f559a | 2023-08-25 20:33:29 -0700 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | / { |
| 3 | mbus@f1000000 { |
| 4 | pciec: pcie@82000000 { |
| 5 | compatible = "marvell,kirkwood-pcie"; |
| 6 | status = "disabled"; |
| 7 | device_type = "pci"; |
| 8 | |
| 9 | #address-cells = <3>; |
| 10 | #size-cells = <2>; |
| 11 | |
| 12 | bus-range = <0x00 0xff>; |
| 13 | |
| 14 | ranges = |
| 15 | <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 |
| 16 | 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 |
| 17 | 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 |
| 18 | 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ |
| 19 | 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ |
| 20 | 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ |
| 21 | 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; |
| 22 | |
| 23 | pcie0: pcie@1,0 { |
| 24 | device_type = "pci"; |
| 25 | assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; |
| 26 | reg = <0x0800 0 0 0 0>; |
| 27 | #address-cells = <3>; |
| 28 | #size-cells = <2>; |
| 29 | #interrupt-cells = <1>; |
| 30 | ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
| 31 | 0x81000000 0 0 0x81000000 0x1 0 1 0>; |
| 32 | bus-range = <0x00 0xff>; |
| 33 | interrupt-names = "intx", "error"; |
| 34 | interrupts = <9>, <44>; |
| 35 | interrupt-map-mask = <0 0 0 7>; |
| 36 | interrupt-map = <0 0 0 1 &pcie0_intc 0>, |
| 37 | <0 0 0 2 &pcie0_intc 1>, |
| 38 | <0 0 0 3 &pcie0_intc 2>, |
| 39 | <0 0 0 4 &pcie0_intc 3>; |
| 40 | marvell,pcie-port = <0>; |
| 41 | marvell,pcie-lane = <0>; |
| 42 | clocks = <&gate_clk 2>; |
| 43 | status = "disabled"; |
| 44 | |
| 45 | pcie0_intc: interrupt-controller { |
| 46 | interrupt-controller; |
| 47 | #interrupt-cells = <1>; |
| 48 | }; |
| 49 | }; |
| 50 | |
| 51 | pcie1: pcie@2,0 { |
| 52 | device_type = "pci"; |
| 53 | assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; |
| 54 | reg = <0x1000 0 0 0 0>; |
| 55 | #address-cells = <3>; |
| 56 | #size-cells = <2>; |
| 57 | #interrupt-cells = <1>; |
| 58 | ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
| 59 | 0x81000000 0 0 0x81000000 0x2 0 1 0>; |
| 60 | bus-range = <0x00 0xff>; |
| 61 | interrupt-names = "intx", "error"; |
| 62 | interrupts = <10>, <45>; |
| 63 | interrupt-map-mask = <0 0 0 7>; |
| 64 | interrupt-map = <0 0 0 1 &pcie1_intc 0>, |
| 65 | <0 0 0 2 &pcie1_intc 1>, |
| 66 | <0 0 0 3 &pcie1_intc 2>, |
| 67 | <0 0 0 4 &pcie1_intc 3>; |
| 68 | marvell,pcie-port = <1>; |
| 69 | marvell,pcie-lane = <0>; |
| 70 | clocks = <&gate_clk 18>; |
| 71 | status = "disabled"; |
| 72 | |
| 73 | pcie1_intc: interrupt-controller { |
| 74 | interrupt-controller; |
| 75 | #interrupt-cells = <1>; |
| 76 | }; |
| 77 | }; |
| 78 | }; |
| 79 | }; |
| 80 | ocp@f1000000 { |
| 81 | |
| 82 | pinctrl: pin-controller@10000 { |
| 83 | compatible = "marvell,88f6282-pinctrl"; |
| 84 | |
| 85 | pmx_sata0: pmx-sata0 { |
| 86 | marvell,pins = "mpp5", "mpp21", "mpp23"; |
| 87 | marvell,function = "sata0"; |
| 88 | }; |
| 89 | pmx_sata1: pmx-sata1 { |
| 90 | marvell,pins = "mpp4", "mpp20", "mpp22"; |
| 91 | marvell,function = "sata1"; |
| 92 | }; |
| 93 | |
| 94 | /* |
| 95 | * Default I2C1 pinctrl setting on mpp36/mpp37, |
| 96 | * overwrite marvell,pins on board level if required. |
| 97 | */ |
| 98 | pmx_twsi1: pmx-twsi1 { |
| 99 | marvell,pins = "mpp36", "mpp37"; |
| 100 | marvell,function = "twsi1"; |
| 101 | }; |
| 102 | |
| 103 | pmx_sdio: pmx-sdio { |
| 104 | marvell,pins = "mpp12", "mpp13", "mpp14", |
| 105 | "mpp15", "mpp16", "mpp17"; |
| 106 | marvell,function = "sdio"; |
| 107 | }; |
| 108 | }; |
| 109 | |
| 110 | thermal: thermal@10078 { |
| 111 | compatible = "marvell,kirkwood-thermal"; |
| 112 | reg = <0x10078 0x4>; |
| 113 | status = "okay"; |
| 114 | }; |
| 115 | |
| 116 | rtc: rtc@10300 { |
| 117 | compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; |
| 118 | reg = <0x10300 0x20>; |
| 119 | interrupts = <53>; |
| 120 | clocks = <&gate_clk 7>; |
| 121 | }; |
| 122 | |
| 123 | i2c1: i2c@11100 { |
| 124 | compatible = "marvell,mv64xxx-i2c"; |
| 125 | reg = <0x11100 0x20>; |
| 126 | #address-cells = <1>; |
| 127 | #size-cells = <0>; |
| 128 | interrupts = <32>; |
| 129 | clock-frequency = <100000>; |
| 130 | clocks = <&gate_clk 7>; |
| 131 | pinctrl-0 = <&pmx_twsi1>; |
| 132 | pinctrl-names = "default"; |
| 133 | status = "disabled"; |
| 134 | }; |
| 135 | |
| 136 | sata: sata@80000 { |
| 137 | compatible = "marvell,orion-sata"; |
| 138 | reg = <0x80000 0x5000>; |
| 139 | interrupts = <21>; |
| 140 | clocks = <&gate_clk 14>, <&gate_clk 15>; |
| 141 | clock-names = "0", "1"; |
| 142 | phys = <&sata_phy0>, <&sata_phy1>; |
| 143 | phy-names = "port0", "port1"; |
| 144 | status = "disabled"; |
| 145 | }; |
| 146 | |
| 147 | sdio: mvsdio@90000 { |
| 148 | compatible = "marvell,orion-sdio"; |
| 149 | reg = <0x90000 0x200>; |
| 150 | interrupts = <28>; |
| 151 | clocks = <&gate_clk 4>; |
| 152 | pinctrl-0 = <&pmx_sdio>; |
| 153 | pinctrl-names = "default"; |
| 154 | bus-width = <4>; |
| 155 | cap-sdio-irq; |
| 156 | cap-sd-highspeed; |
| 157 | cap-mmc-highspeed; |
| 158 | status = "disabled"; |
| 159 | }; |
| 160 | }; |
| 161 | }; |