blob: 52555da4b32ad62e79b89e6cae4403b17c0c8a54 [file] [log] [blame]
Alexaf2cbfd2017-02-06 19:17:34 -08001source "drivers/net/phy/Kconfig"
2
Joe Hershberger05c3e682015-03-22 17:09:10 -05003config DM_ETH
4 bool "Enable Driver Model for Ethernet drivers"
5 depends on DM
6 help
7 Enable driver model for Ethernet.
8
9 The eth_*() interface will be implemented by the UC_ETH class
10 This is currently implemented in net/eth.c
11 Look in include/net.h for details.
Joe Hershberger3ea143a2015-03-22 17:09:13 -050012
13menuconfig NETDEVICES
14 bool "Network device support"
15 depends on NET
Joe Hershbergeref0f2f52015-06-22 16:15:30 -050016 default y if DM_ETH
Joe Hershberger3ea143a2015-03-22 17:09:13 -050017 help
18 You must select Y to enable any network device support
19 Generally if you have any networking support this is a given
20
21 If unsure, say Y
22
23if NETDEVICES
24
Philipp Tomsich449ea2c2017-03-26 18:50:23 +020025config PHY_GIGE
26 bool "Enable GbE PHY status parsing and configuration"
27 help
28 Enables support for parsing the status output and for
29 configuring GbE PHYs (affects the inner workings of some
30 commands and miiphyutil.c).
31
Marek Vasute40095f2016-05-24 23:29:09 +020032config AG7XXX
33 bool "Atheros AG7xxx Ethernet MAC support"
34 depends on DM_ETH && ARCH_ATH79
35 select PHYLIB
36 help
37 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
38 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
39
40
Thomas Chou96fa1e42015-10-22 15:29:11 +080041config ALTERA_TSE
42 bool "Altera Triple-Speed Ethernet MAC support"
43 depends on DM_ETH
44 select PHYLIB
45 help
46 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
47 Please find details on the "Triple-Speed Ethernet MegaCore Function
48 Resource Center" of Altera.
49
Suji Velupillaic89782d2017-07-10 14:05:41 -070050config BCM_SF2_ETH
51 bool "Broadcom SF2 (Starfighter2) Ethernet support"
52 select PHYLIB
53 help
54 This is an abstract framework which provides a generic interface
55 to MAC and DMA management for multiple Broadcom SoCs such as
56 Cygnus, NSP and bcm28155_ap platforms.
57
58config BCM_SF2_ETH_DEFAULT_PORT
59 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
60 depends on BCM_SF2_ETH
61 default 0
62 help
63 Default port number for the Starfighter2 ethernet driver.
64
65config BCM_SF2_ETH_GMAC
66 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
67 depends on BCM_SF2_ETH
68 help
69 This flag enables the ethernet support for Broadcom platforms with
70 GMAC such as Cygnus. This driver is based on the framework provided
71 by the BCM_SF2_ETH driver.
72 Say Y to any bcmcygnus based platforms.
73
Stephen Warrenba4dfef2016-10-21 14:46:47 -060074config DWC_ETH_QOS
75 bool "Synopsys DWC Ethernet QOS device support"
76 depends on DM_ETH
77 select PHYLIB
78 help
79 This driver supports the Synopsys Designware Ethernet QOS (Quality
80 Of Service) IP block. The IP supports many options for bus type,
81 clocking/reset structure, and feature list. This driver currently
82 supports the specific configuration used in NVIDIA's Tegra186 chip,
83 but should be extensible to other combinations quite easily.
84
Simon Glassc294ac52015-08-19 09:33:41 -060085config E1000
86 bool "Intel PRO/1000 Gigabit Ethernet support"
87 help
88 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
89 adapters. For more information on how to identify your adapter, go
90 to the Adapter & Driver ID Guide at:
91
92 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
93
94config E1000_SPI_GENERIC
95 bool "Allow access to the Intel 8257x SPI bus"
96 depends on E1000
97 help
98 Allow generic access to the SPI bus on the Intel 8257x, for
99 example with the "sspi" command.
100
101config E1000_SPI
102 bool "Enable SPI bus utility code"
103 depends on E1000
104 help
105 Utility code for direct access to the SPI bus on Intel 8257x.
106 This does not do anything useful unless you set at least one
107 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
108
109config CMD_E1000
110 bool "Enable the e1000 command"
111 depends on E1000
112 help
113 This enables the 'e1000' management command for E1000 devices. When
114 used on devices with SPI support you can reprogram the EEPROM from
115 U-Boot.
116
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500117config ETH_SANDBOX
118 depends on DM_ETH && SANDBOX
119 default y
120 bool "Sandbox: Mocked Ethernet driver"
121 help
122 This driver simply responds with fake ARP replies and ping
123 replies that are used to verify network stack functionality
124
125 This driver is particularly useful in the test/dm/eth.c tests
126
Joe Hershbergera346ca72015-03-22 17:09:21 -0500127config ETH_SANDBOX_RAW
128 depends on DM_ETH && SANDBOX
129 default y
130 bool "Sandbox: Bridge to Linux Raw Sockets"
131 help
132 This driver is a bridge from the bottom of the network stack
133 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
134 network traffic to be tested from within sandbox. See
135 board/sandbox/README.sandbox for more details.
136
Simon Glassef48f6d2015-04-05 16:07:34 -0600137config ETH_DESIGNWARE
138 bool "Synopsys Designware Ethernet MAC"
Thomas Chou25af71c2015-12-07 20:53:29 +0800139 select PHYLIB
Simon Glassef48f6d2015-04-05 16:07:34 -0600140 help
141 This MAC is present in SoCs from various vendors. It supports
142 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
143 provide the PHY (physical media interface).
144
Max Filippovf0727122016-08-05 18:26:15 +0300145config ETHOC
146 bool "OpenCores 10/100 Mbps Ethernet MAC"
147 help
148 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
149
Jagan Teki97d29ca2016-10-08 18:00:12 +0530150config FEC_MXC
151 bool "FEC Ethernet controller"
Patrick Bruenn98d62e62016-11-04 11:57:02 +0100152 depends on MX5 || MX6
Jagan Teki97d29ca2016-10-08 18:00:12 +0530153 help
154 This driver supports the 10/100 Fast Ethernet controller for
155 NXP i.MX processors.
156
Tom Rini8dc1b172017-05-26 11:18:53 -0400157config FTMAC100
158 bool "Ftmac100 Ethernet Support"
159 help
160 This MAC is present in Andestech SoCs.
161
Chris Packham7654f622017-08-21 20:17:03 +1200162config MVNETA
163 bool "Marvell Armada 385 network interface support"
164 depends on ARMADA_XP || ARMADA_38X
165 select PHYLIB
166 help
167 This driver supports the network interface units in the
168 Marvell ARMADA XP and 38X SoCs
169
Stefan Roese99d4c6d2016-02-10 07:22:10 +0100170config MVPP2
Stefan Roesee7935c42017-02-15 11:42:59 +0100171 bool "Marvell Armada 375/7K/8K network interface support"
172 depends on ARMADA_375 || ARMADA_8K
Stefan Roese99d4c6d2016-02-10 07:22:10 +0100173 select PHYLIB
174 help
175 This driver supports the network interface units in the
Stefan Roesee7935c42017-02-15 11:42:59 +0100176 Marvell ARMADA 375, 7K and 8K SoCs.
Stefan Roese99d4c6d2016-02-10 07:22:10 +0100177
Wenyou Yangebcb40a2016-11-02 10:06:55 +0800178config MACB
179 bool "Cadence MACB/GEM Ethernet Interface"
180 depends on DM_ETH
181 select PHYLIB
182 help
183 The Cadence MACB ethernet interface is found on many Atmel
184 AT91 and SAMA5 parts. This driver also supports the Cadence
185 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
186 Say Y to include support for the MACB/GEM chip.
187
Bin Mengb68fe152015-08-27 22:25:58 -0700188config PCH_GBE
189 bool "Intel Platform Controller Hub EG20T GMAC driver"
190 depends on DM_ETH && DM_PCI
191 select PHYLIB
192 help
193 This MAC is present in Intel Platform Controller Hub EG20T. It
194 supports 10/100/1000 Mbps operation.
195
Mylène Josserand751b0be2017-04-02 12:59:08 +0200196config RGMII
197 bool "Enable RGMII"
198 help
199 Enable the support of the Reduced Gigabit Media-Independent
200 Interface (RGMII).
201
Bin Meng86e9dc82016-03-21 06:47:41 -0700202config RTL8139
203 bool "Realtek 8139 series Ethernet controller driver"
204 help
205 This driver supports Realtek 8139 series fast ethernet family of
206 PCI chipsets/adapters.
207
Bin Meng0764f242016-03-21 06:47:42 -0700208config RTL8169
209 bool "Realtek 8169 series Ethernet controller driver"
210 help
211 This driver supports Realtek 8169 series gigabit ethernet family of
212 PCI/PCIe chipsets/adapters.
213
Adam Ford8daec2d2017-09-05 15:20:44 -0500214config SMC911X
215 bool "SMSC LAN911x and LAN921x controller driver"
216
217if SMC911X
218
219config SMC911X_BASE
220 hex "SMC911X Base Address"
221 help
222 Define this to hold the physical address
223 of the device (I/O space)
224
225choice
226 prompt "SMC911X bus width"
227 default SMC911X_16_BIT
228
229config SMC911X_32_BIT
230 bool "Enable 32-bit interface"
231
232config SMC911X_16_BIT
233 bool "Enable 16-bit interface"
234 help
235 Define this if data bus is 16 bits. If your processor
236 automatically converts one 32 bit word to two 16 bit
237 words you may also try CONFIG_SMC911X_32_BIT.
238
239endchoice
240endif #SMC911X
241
Mylène Josserand4d43d062017-04-02 12:59:03 +0200242config SUN7I_GMAC
243 bool "Enable Allwinner GMAC Ethernet support"
244 help
245 Enable the support for Sun7i GMAC Ethernet controller
246
Mylène Josserandabc3e4d2017-04-02 12:59:07 +0200247config SUN4I_EMAC
248 bool "Allwinner Sun4i Ethernet MAC support"
249 depends on DM_ETH
Artturi Alm6270a3f2017-11-08 05:08:58 +0200250 select PHYLIB
Mylène Josserandabc3e4d2017-04-02 12:59:07 +0200251 help
252 This driver supports the Allwinner based SUN4I Ethernet MAC.
253
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530254config SUN8I_EMAC
255 bool "Allwinner Sun8i Ethernet MAC support"
256 depends on DM_ETH
257 select PHYLIB
Philipp Tomsich449ea2c2017-03-26 18:50:23 +0200258 select PHY_GIGE
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530259 help
260 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
261 It can be found in H3/A64/A83T based SoCs and compatible with both
Tom Rini7131d2d2017-02-20 09:38:03 -0500262 External and Internal PHYs.
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530263
Michal Simek338a5f22015-12-09 16:54:42 +0100264config XILINX_AXIEMAC
265 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
266 select PHYLIB
267 select MII
268 bool "Xilinx AXI Ethernet"
269 help
270 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
271
Michal Simek3229c862015-12-11 09:41:49 +0100272config XILINX_EMACLITE
Zubair Lutfullah Kakakhel2f1f05f2016-07-27 12:25:09 +0100273 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
Michal Simek3229c862015-12-11 09:41:49 +0100274 select PHYLIB
275 select MII
276 bool "Xilinx Ethernetlite"
277 help
278 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
279
Michal Simek596e5782015-11-30 14:34:52 +0100280config ZYNQ_GEM
281 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
Michal Simek7bccc752015-12-11 09:14:31 +0100282 select PHYLIB
Michal Simek596e5782015-11-30 14:34:52 +0100283 bool "Xilinx Ethernet GEM"
284 help
Michal Simekc9428102015-12-09 16:53:52 +0100285 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
Michal Simek596e5782015-11-30 14:34:52 +0100286
Purna Chandra Mandal23e75782016-01-28 15:30:21 +0530287config PIC32_ETH
288 bool "Microchip PIC32 Ethernet Support"
289 depends on DM_ETH && MACH_PIC32
290 select PHYLIB
291 help
292 This driver implements 10/100 Mbps Ethernet and MAC layer for
293 Microchip PIC32 microcontrollers.
294
Sjoerd Simons0125bcf2017-01-11 11:46:11 +0100295config GMAC_ROCKCHIP
296 bool "Rockchip Synopsys Designware Ethernet MAC"
297 depends on DM_ETH && ETH_DESIGNWARE
298 help
299 This driver provides Rockchip SoCs network support based on the
300 Synopsys Designware driver.
301
Marek Vasut8ae51b62017-05-13 15:54:28 +0200302config RENESAS_RAVB
303 bool "Renesas Ethernet AVB MAC"
304 depends on DM_ETH && RCAR_GEN3
305 select PHYLIB
306 help
307 This driver implements support for the Ethernet AVB block in
308 Renesas M3 and H3 SoCs.
309
Christophe Leroyfad51ac2017-07-06 10:33:23 +0200310config MPC8XX_FEC
311 bool "Fast Ethernet Controller on MPC8XX"
312 depends on 8xx
313 select MII
314 help
315 This driver implements support for the Fast Ethernet Controller
316 on MPC8XX
317
318config ETHER_ON_FEC1
319 bool "FEC1"
320 depends on MPC8XX_FEC
321 default y
322
323config FEC1_PHY
324 int "FEC1 PHY"
325 depends on ETHER_ON_FEC1
326 default -1
327 help
328 Define to the hardcoded PHY address which corresponds
329 to the given FEC; i. e.
330 #define CONFIG_FEC1_PHY 4
331 means that the PHY with address 4 is connected to FEC1
332
333 When set to -1, means to probe for first available.
334
335config PHY_NORXERR
336 bool "PHY_NORXERR"
337 depends on ETHER_ON_FEC1
338 default n
339 help
340 The PHY does not have a RXERR line (RMII only).
341 (so program the FEC to ignore it).
342
343config ETHER_ON_FEC2
344 bool "FEC2"
345 depends on MPC8XX_FEC && MPC885
346 default y
347
348config FEC2_PHY
349 int "FEC2 PHY"
350 depends on ETHER_ON_FEC2
351 default -1
352 help
353 Define to the hardcoded PHY address which corresponds
354 to the given FEC; i. e.
355 #define CONFIG_FEC1_PHY 4
356 means that the PHY with address 4 is connected to FEC1
357
358 When set to -1, means to probe for first available.
359
360config FEC2_PHY_NORXERR
361 bool "PHY_NORXERR"
362 depends on ETHER_ON_FEC2
363 default n
364 help
365 The PHY does not have a RXERR line (RMII only).
366 (so program the FEC to ignore it).
367
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500368endif # NETDEVICES