Marek Vasut | 07133f2 | 2011-11-02 00:29:27 +0000 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> |
| 3 | * |
| 4 | * Loosely based on the old code and Linux's PXA MMC driver |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of the GNU General Public License as |
| 8 | * published by the Free Software Foundation; either version 2 of |
| 9 | * the License, or (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License |
| 17 | * along with this program; if not, write to the Free Software |
| 18 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 19 | * MA 02111-1307 USA |
| 20 | */ |
| 21 | |
| 22 | #include <config.h> |
| 23 | #include <common.h> |
| 24 | #include <malloc.h> |
| 25 | |
| 26 | #include <mmc.h> |
| 27 | #include <asm/errno.h> |
| 28 | #include <asm/arch/hardware.h> |
| 29 | #include <asm/arch/regs-mmc.h> |
| 30 | #include <asm/io.h> |
| 31 | |
| 32 | /* PXAMMC Generic default config for various CPUs */ |
Marek Vasut | abc20ab | 2011-11-26 07:20:07 +0100 | [diff] [blame^] | 33 | #if defined(CONFIG_CPU_PXA25X) |
Marek Vasut | 07133f2 | 2011-11-02 00:29:27 +0000 | [diff] [blame] | 34 | #define PXAMMC_FIFO_SIZE 1 |
| 35 | #define PXAMMC_MIN_SPEED 312500 |
| 36 | #define PXAMMC_MAX_SPEED 20000000 |
| 37 | #define PXAMMC_HOST_CAPS (0) |
Marek Vasut | abc20ab | 2011-11-26 07:20:07 +0100 | [diff] [blame^] | 38 | #elif defined(CONFIG_CPU_PXA27X) |
Marek Vasut | 07133f2 | 2011-11-02 00:29:27 +0000 | [diff] [blame] | 39 | #define PXAMMC_CRC_SKIP |
| 40 | #define PXAMMC_FIFO_SIZE 32 |
| 41 | #define PXAMMC_MIN_SPEED 304000 |
| 42 | #define PXAMMC_MAX_SPEED 19500000 |
| 43 | #define PXAMMC_HOST_CAPS (MMC_MODE_4BIT) |
| 44 | #elif defined(CONFIG_CPU_MONAHANS) |
| 45 | #define PXAMMC_FIFO_SIZE 32 |
| 46 | #define PXAMMC_MIN_SPEED 304000 |
| 47 | #define PXAMMC_MAX_SPEED 26000000 |
| 48 | #define PXAMMC_HOST_CAPS (MMC_MODE_4BIT | MMC_MODE_HS) |
| 49 | #else |
| 50 | #error "This CPU isn't supported by PXA MMC!" |
| 51 | #endif |
| 52 | |
| 53 | #define MMC_STAT_ERRORS \ |
| 54 | (MMC_STAT_RES_CRC_ERROR | MMC_STAT_SPI_READ_ERROR_TOKEN | \ |
| 55 | MMC_STAT_CRC_READ_ERROR | MMC_STAT_TIME_OUT_RESPONSE | \ |
| 56 | MMC_STAT_READ_TIME_OUT | MMC_STAT_CRC_WRITE_ERROR) |
| 57 | |
| 58 | /* 1 millisecond (in wait cycles below it's 100 x 10uS waits) */ |
| 59 | #define PXA_MMC_TIMEOUT 100 |
| 60 | |
| 61 | struct pxa_mmc_priv { |
| 62 | struct pxa_mmc_regs *regs; |
| 63 | }; |
| 64 | |
| 65 | /* Wait for bit to be set */ |
| 66 | static int pxa_mmc_wait(struct mmc *mmc, uint32_t mask) |
| 67 | { |
| 68 | struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv; |
| 69 | struct pxa_mmc_regs *regs = priv->regs; |
| 70 | unsigned int timeout = PXA_MMC_TIMEOUT; |
| 71 | |
| 72 | /* Wait for bit to be set */ |
| 73 | while (--timeout) { |
| 74 | if (readl(®s->stat) & mask) |
| 75 | break; |
| 76 | udelay(10); |
| 77 | } |
| 78 | |
| 79 | if (!timeout) |
| 80 | return -ETIMEDOUT; |
| 81 | |
| 82 | return 0; |
| 83 | } |
| 84 | |
| 85 | static int pxa_mmc_stop_clock(struct mmc *mmc) |
| 86 | { |
| 87 | struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv; |
| 88 | struct pxa_mmc_regs *regs = priv->regs; |
| 89 | unsigned int timeout = PXA_MMC_TIMEOUT; |
| 90 | |
| 91 | /* If the clock aren't running, exit */ |
| 92 | if (!(readl(®s->stat) & MMC_STAT_CLK_EN)) |
| 93 | return 0; |
| 94 | |
| 95 | /* Tell the controller to turn off the clock */ |
| 96 | writel(MMC_STRPCL_STOP_CLK, ®s->strpcl); |
| 97 | |
| 98 | /* Wait until the clock are off */ |
| 99 | while (--timeout) { |
| 100 | if (!(readl(®s->stat) & MMC_STAT_CLK_EN)) |
| 101 | break; |
| 102 | udelay(10); |
| 103 | } |
| 104 | |
| 105 | /* The clock refused to stop, scream and die a painful death */ |
| 106 | if (!timeout) |
| 107 | return -ETIMEDOUT; |
| 108 | |
| 109 | /* The clock stopped correctly */ |
| 110 | return 0; |
| 111 | } |
| 112 | |
| 113 | static int pxa_mmc_start_cmd(struct mmc *mmc, struct mmc_cmd *cmd, |
| 114 | uint32_t cmdat) |
| 115 | { |
| 116 | struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv; |
| 117 | struct pxa_mmc_regs *regs = priv->regs; |
| 118 | int ret; |
| 119 | |
| 120 | /* The card can send a "busy" response */ |
| 121 | if (cmd->flags & MMC_RSP_BUSY) |
| 122 | cmdat |= MMC_CMDAT_BUSY; |
| 123 | |
| 124 | /* Inform the controller about response type */ |
| 125 | switch (cmd->resp_type) { |
| 126 | case MMC_RSP_R1: |
| 127 | case MMC_RSP_R1b: |
| 128 | cmdat |= MMC_CMDAT_R1; |
| 129 | break; |
| 130 | case MMC_RSP_R2: |
| 131 | cmdat |= MMC_CMDAT_R2; |
| 132 | break; |
| 133 | case MMC_RSP_R3: |
| 134 | cmdat |= MMC_CMDAT_R3; |
| 135 | break; |
| 136 | default: |
| 137 | break; |
| 138 | } |
| 139 | |
| 140 | /* Load command and it's arguments into the controller */ |
| 141 | writel(cmd->cmdidx, ®s->cmd); |
| 142 | writel(cmd->cmdarg >> 16, ®s->argh); |
| 143 | writel(cmd->cmdarg & 0xffff, ®s->argl); |
| 144 | writel(cmdat, ®s->cmdat); |
| 145 | |
| 146 | /* Start the controller clock and wait until they are started */ |
| 147 | writel(MMC_STRPCL_START_CLK, ®s->strpcl); |
| 148 | |
| 149 | ret = pxa_mmc_wait(mmc, MMC_STAT_CLK_EN); |
| 150 | if (ret) |
| 151 | return ret; |
| 152 | |
| 153 | /* Correct and happy end */ |
| 154 | return 0; |
| 155 | } |
| 156 | |
| 157 | static int pxa_mmc_cmd_done(struct mmc *mmc, struct mmc_cmd *cmd) |
| 158 | { |
| 159 | struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv; |
| 160 | struct pxa_mmc_regs *regs = priv->regs; |
| 161 | uint32_t a, b, c; |
| 162 | int i; |
| 163 | int stat; |
| 164 | |
| 165 | /* Read the controller status */ |
| 166 | stat = readl(®s->stat); |
| 167 | |
| 168 | /* |
| 169 | * Linux says: |
| 170 | * Did I mention this is Sick. We always need to |
| 171 | * discard the upper 8 bits of the first 16-bit word. |
| 172 | */ |
| 173 | a = readl(®s->res) & 0xffff; |
| 174 | for (i = 0; i < 4; i++) { |
| 175 | b = readl(®s->res) & 0xffff; |
| 176 | c = readl(®s->res) & 0xffff; |
| 177 | cmd->response[i] = (a << 24) | (b << 8) | (c >> 8); |
| 178 | a = c; |
| 179 | } |
| 180 | |
| 181 | /* The command response didn't arrive */ |
| 182 | if (stat & MMC_STAT_TIME_OUT_RESPONSE) |
| 183 | return -ETIMEDOUT; |
| 184 | else if (stat & MMC_STAT_RES_CRC_ERROR && cmd->flags & MMC_RSP_CRC) { |
| 185 | #ifdef PXAMMC_CRC_SKIP |
| 186 | if (cmd->flags & MMC_RSP_136 && cmd->response[0] & (1 << 31)) |
| 187 | printf("Ignoring CRC, this may be dangerous!\n"); |
| 188 | else |
| 189 | #endif |
| 190 | return -EILSEQ; |
| 191 | } |
| 192 | |
| 193 | /* The command response was successfully read */ |
| 194 | return 0; |
| 195 | } |
| 196 | |
| 197 | static int pxa_mmc_do_read_xfer(struct mmc *mmc, struct mmc_data *data) |
| 198 | { |
| 199 | struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv; |
| 200 | struct pxa_mmc_regs *regs = priv->regs; |
| 201 | uint32_t len; |
| 202 | uint32_t *buf = (uint32_t *)data->dest; |
| 203 | int size; |
| 204 | int ret; |
| 205 | |
| 206 | len = data->blocks * data->blocksize; |
| 207 | |
| 208 | while (len) { |
| 209 | /* The controller has data ready */ |
| 210 | if (readl(®s->i_reg) & MMC_I_REG_RXFIFO_RD_REQ) { |
| 211 | size = min(len, PXAMMC_FIFO_SIZE); |
| 212 | len -= size; |
| 213 | size /= 4; |
| 214 | |
| 215 | /* Read data into the buffer */ |
| 216 | while (size--) |
| 217 | *buf++ = readl(®s->rxfifo); |
| 218 | |
| 219 | } |
| 220 | |
| 221 | if (readl(®s->stat) & MMC_STAT_ERRORS) |
| 222 | return -EIO; |
| 223 | } |
| 224 | |
| 225 | /* Wait for the transmission-done interrupt */ |
| 226 | ret = pxa_mmc_wait(mmc, MMC_STAT_DATA_TRAN_DONE); |
| 227 | if (ret) |
| 228 | return ret; |
| 229 | |
| 230 | return 0; |
| 231 | } |
| 232 | |
| 233 | static int pxa_mmc_do_write_xfer(struct mmc *mmc, struct mmc_data *data) |
| 234 | { |
| 235 | struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv; |
| 236 | struct pxa_mmc_regs *regs = priv->regs; |
| 237 | uint32_t len; |
| 238 | uint32_t *buf = (uint32_t *)data->src; |
| 239 | int size; |
| 240 | int ret; |
| 241 | |
| 242 | len = data->blocks * data->blocksize; |
| 243 | |
| 244 | while (len) { |
| 245 | /* The controller is ready to receive data */ |
| 246 | if (readl(®s->i_reg) & MMC_I_REG_TXFIFO_WR_REQ) { |
| 247 | size = min(len, PXAMMC_FIFO_SIZE); |
| 248 | len -= size; |
| 249 | size /= 4; |
| 250 | |
| 251 | while (size--) |
| 252 | writel(*buf++, ®s->txfifo); |
| 253 | |
| 254 | if (min(len, PXAMMC_FIFO_SIZE) < 32) |
| 255 | writel(MMC_PRTBUF_BUF_PART_FULL, ®s->prtbuf); |
| 256 | } |
| 257 | |
| 258 | if (readl(®s->stat) & MMC_STAT_ERRORS) |
| 259 | return -EIO; |
| 260 | } |
| 261 | |
| 262 | /* Wait for the transmission-done interrupt */ |
| 263 | ret = pxa_mmc_wait(mmc, MMC_STAT_DATA_TRAN_DONE); |
| 264 | if (ret) |
| 265 | return ret; |
| 266 | |
| 267 | /* Wait until the data are really written to the card */ |
| 268 | ret = pxa_mmc_wait(mmc, MMC_STAT_PRG_DONE); |
| 269 | if (ret) |
| 270 | return ret; |
| 271 | |
| 272 | return 0; |
| 273 | } |
| 274 | |
| 275 | static int pxa_mmc_request(struct mmc *mmc, struct mmc_cmd *cmd, |
| 276 | struct mmc_data *data) |
| 277 | { |
| 278 | struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv; |
| 279 | struct pxa_mmc_regs *regs = priv->regs; |
| 280 | uint32_t cmdat = 0; |
| 281 | int ret; |
| 282 | |
| 283 | /* Stop the controller */ |
| 284 | ret = pxa_mmc_stop_clock(mmc); |
| 285 | if (ret) |
| 286 | return ret; |
| 287 | |
| 288 | /* If we're doing data transfer, configure the controller accordingly */ |
| 289 | if (data) { |
| 290 | writel(data->blocks, ®s->nob); |
| 291 | writel(data->blocksize, ®s->blklen); |
| 292 | /* This delay can be optimized, but stick with max value */ |
| 293 | writel(0xffff, ®s->rdto); |
| 294 | cmdat |= MMC_CMDAT_DATA_EN; |
| 295 | if (data->flags & MMC_DATA_WRITE) |
| 296 | cmdat |= MMC_CMDAT_WRITE; |
| 297 | } |
| 298 | |
| 299 | /* Run in 4bit mode if the card can do it */ |
| 300 | if (mmc->bus_width == 4) |
| 301 | cmdat |= MMC_CMDAT_SD_4DAT; |
| 302 | |
| 303 | /* Execute the command */ |
| 304 | ret = pxa_mmc_start_cmd(mmc, cmd, cmdat); |
| 305 | if (ret) |
| 306 | return ret; |
| 307 | |
| 308 | /* Wait until the command completes */ |
| 309 | ret = pxa_mmc_wait(mmc, MMC_STAT_END_CMD_RES); |
| 310 | if (ret) |
| 311 | return ret; |
| 312 | |
| 313 | /* Read back the result */ |
| 314 | ret = pxa_mmc_cmd_done(mmc, cmd); |
| 315 | if (ret) |
| 316 | return ret; |
| 317 | |
| 318 | /* In case there was a data transfer scheduled, do it */ |
| 319 | if (data) { |
| 320 | if (data->flags & MMC_DATA_WRITE) |
| 321 | pxa_mmc_do_write_xfer(mmc, data); |
| 322 | else |
| 323 | pxa_mmc_do_read_xfer(mmc, data); |
| 324 | } |
| 325 | |
| 326 | return 0; |
| 327 | } |
| 328 | |
| 329 | static void pxa_mmc_set_ios(struct mmc *mmc) |
| 330 | { |
| 331 | struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv; |
| 332 | struct pxa_mmc_regs *regs = priv->regs; |
| 333 | uint32_t tmp; |
| 334 | uint32_t pxa_mmc_clock; |
| 335 | |
| 336 | if (!mmc->clock) { |
| 337 | pxa_mmc_stop_clock(mmc); |
| 338 | return; |
| 339 | } |
| 340 | |
| 341 | /* PXA3xx can do 26MHz with special settings. */ |
| 342 | if (mmc->clock == 26000000) { |
| 343 | writel(0x7, ®s->clkrt); |
| 344 | return; |
| 345 | } |
| 346 | |
| 347 | /* Set clock to the card the usual way. */ |
| 348 | pxa_mmc_clock = 0; |
| 349 | tmp = mmc->f_max / mmc->clock; |
| 350 | tmp += tmp % 2; |
| 351 | |
| 352 | while (tmp > 1) { |
| 353 | pxa_mmc_clock++; |
| 354 | tmp >>= 1; |
| 355 | } |
| 356 | |
| 357 | writel(pxa_mmc_clock, ®s->clkrt); |
| 358 | } |
| 359 | |
| 360 | static int pxa_mmc_init(struct mmc *mmc) |
| 361 | { |
| 362 | struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv; |
| 363 | struct pxa_mmc_regs *regs = priv->regs; |
| 364 | |
| 365 | /* Make sure the clock are stopped */ |
| 366 | pxa_mmc_stop_clock(mmc); |
| 367 | |
| 368 | /* Turn off SPI mode */ |
| 369 | writel(0, ®s->spi); |
| 370 | |
| 371 | /* Set up maximum timeout to wait for command response */ |
| 372 | writel(MMC_RES_TO_MAX_MASK, ®s->resto); |
| 373 | |
| 374 | /* Mask all interrupts */ |
| 375 | writel(~(MMC_I_MASK_TXFIFO_WR_REQ | MMC_I_MASK_RXFIFO_RD_REQ), |
| 376 | ®s->i_mask); |
| 377 | return 0; |
| 378 | } |
| 379 | |
| 380 | int pxa_mmc_register(int card_index) |
| 381 | { |
| 382 | struct mmc *mmc; |
| 383 | struct pxa_mmc_priv *priv; |
| 384 | uint32_t reg; |
| 385 | int ret = -ENOMEM; |
| 386 | |
| 387 | mmc = malloc(sizeof(struct mmc)); |
| 388 | if (!mmc) |
| 389 | goto err0; |
| 390 | |
| 391 | priv = malloc(sizeof(struct pxa_mmc_priv)); |
| 392 | if (!priv) |
| 393 | goto err1; |
| 394 | |
| 395 | switch (card_index) { |
| 396 | case 0: |
| 397 | priv->regs = (struct pxa_mmc_regs *)MMC0_BASE; |
| 398 | break; |
| 399 | case 1: |
| 400 | priv->regs = (struct pxa_mmc_regs *)MMC1_BASE; |
| 401 | break; |
| 402 | default: |
| 403 | printf("PXA MMC: Invalid MMC controller ID (card_index = %d)\n", |
| 404 | card_index); |
| 405 | goto err2; |
| 406 | } |
| 407 | |
| 408 | mmc->priv = priv; |
| 409 | |
| 410 | sprintf(mmc->name, "PXA MMC"); |
| 411 | mmc->send_cmd = pxa_mmc_request; |
| 412 | mmc->set_ios = pxa_mmc_set_ios; |
| 413 | mmc->init = pxa_mmc_init; |
| 414 | |
| 415 | mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; |
| 416 | mmc->f_max = PXAMMC_MAX_SPEED; |
| 417 | mmc->f_min = PXAMMC_MIN_SPEED; |
| 418 | mmc->host_caps = PXAMMC_HOST_CAPS; |
| 419 | |
| 420 | mmc->b_max = 0; |
| 421 | |
| 422 | #ifndef CONFIG_CPU_MONAHANS /* PXA2xx */ |
| 423 | reg = readl(CKEN); |
| 424 | reg |= CKEN12_MMC; |
| 425 | writel(reg, CKEN); |
| 426 | #else /* PXA3xx */ |
| 427 | reg = readl(CKENA); |
| 428 | reg |= CKENA_12_MMC0 | CKENA_13_MMC1; |
| 429 | writel(reg, CKENA); |
| 430 | #endif |
| 431 | |
| 432 | mmc_register(mmc); |
| 433 | |
| 434 | return 0; |
| 435 | |
| 436 | err2: |
| 437 | free(priv); |
| 438 | err1: |
| 439 | free(mmc); |
| 440 | err0: |
| 441 | return ret; |
| 442 | } |