Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 2 | /* |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 3 | * Copyright 2017 Beckhoff Automation GmbH & Co. KG |
| 4 | * based on imx53-qsb.dts |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | #include "imx53.dtsi" |
| 9 | |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 10 | / { |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 11 | model = "Beckhoff CX9020 Embedded PC"; |
| 12 | compatible = "bhf,cx9020", "fsl,imx53"; |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 13 | |
| 14 | chosen { |
| 15 | stdout-path = &uart2; |
| 16 | }; |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 17 | |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 18 | memory@70000000 { |
| 19 | device_type = "memory"; |
| 20 | reg = <0x70000000 0x20000000>, |
| 21 | <0xb0000000 0x20000000>; |
| 22 | }; |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 23 | |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 24 | display-0 { |
| 25 | #address-cells =<1>; |
| 26 | #size-cells = <0>; |
| 27 | compatible = "fsl,imx-parallel-display"; |
| 28 | interface-pix-fmt = "rgb24"; |
| 29 | pinctrl-names = "default"; |
| 30 | pinctrl-0 = <&pinctrl_ipu_disp0>; |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 31 | |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 32 | port@0 { |
| 33 | reg = <0>; |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 34 | |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 35 | display0_in: endpoint { |
| 36 | remote-endpoint = <&ipu_di0_disp0>; |
| 37 | }; |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 38 | }; |
| 39 | |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 40 | port@1 { |
| 41 | reg = <1>; |
Steffen Dirkwinkel | 9c2b1b0 | 2019-10-23 07:40:40 +0200 | [diff] [blame] | 42 | |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 43 | display0_out: endpoint { |
| 44 | remote-endpoint = <&tfp410_in>; |
| 45 | }; |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 46 | }; |
| 47 | }; |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 48 | |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 49 | dvi-connector { |
| 50 | compatible = "dvi-connector"; |
| 51 | ddc-i2c-bus = <&i2c2>; |
| 52 | digital; |
| 53 | |
| 54 | port { |
| 55 | dvi_connector_in: endpoint { |
| 56 | remote-endpoint = <&tfp410_out>; |
| 57 | }; |
| 58 | }; |
| 59 | }; |
| 60 | |
| 61 | dvi-converter { |
| 62 | compatible = "ti,tfp410"; |
| 63 | |
| 64 | ports { |
| 65 | #address-cells = <1>; |
| 66 | #size-cells = <0>; |
| 67 | |
| 68 | port@0 { |
| 69 | reg = <0>; |
| 70 | |
| 71 | tfp410_in: endpoint { |
| 72 | remote-endpoint = <&display0_out>; |
| 73 | }; |
| 74 | }; |
| 75 | |
| 76 | port@1 { |
| 77 | reg = <1>; |
| 78 | |
| 79 | tfp410_out: endpoint { |
| 80 | remote-endpoint = <&dvi_connector_in>; |
| 81 | }; |
| 82 | }; |
| 83 | }; |
| 84 | }; |
| 85 | |
| 86 | leds { |
| 87 | compatible = "gpio-leds"; |
| 88 | |
| 89 | pwr-r { |
| 90 | gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| 91 | default-state = "off"; |
| 92 | }; |
| 93 | |
| 94 | pwr-g { |
| 95 | gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; |
| 96 | default-state = "on"; |
| 97 | }; |
| 98 | |
| 99 | pwr-b { |
| 100 | gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| 101 | default-state = "off"; |
| 102 | }; |
| 103 | |
| 104 | sd1-b { |
| 105 | linux,default-trigger = "mmc0"; |
| 106 | gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; |
| 107 | }; |
| 108 | |
| 109 | sd2-b { |
| 110 | linux,default-trigger = "mmc1"; |
| 111 | gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; |
| 112 | }; |
| 113 | }; |
| 114 | |
| 115 | regulator-3p2v { |
| 116 | compatible = "regulator-fixed"; |
| 117 | regulator-name = "3P2V"; |
| 118 | regulator-min-microvolt = <3200000>; |
| 119 | regulator-max-microvolt = <3200000>; |
| 120 | regulator-always-on; |
| 121 | }; |
| 122 | |
| 123 | reg_usb_vbus: regulator-vbus { |
| 124 | compatible = "regulator-fixed"; |
| 125 | regulator-name = "usb_vbus"; |
| 126 | regulator-min-microvolt = <5000000>; |
| 127 | regulator-max-microvolt = <5000000>; |
| 128 | gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; |
| 129 | enable-active-high; |
| 130 | }; |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 131 | }; |
| 132 | |
Patrick Bruenn | 7e04b4c | 2019-01-03 07:54:34 +0100 | [diff] [blame] | 133 | &esdhc1 { |
| 134 | pinctrl-names = "default"; |
| 135 | pinctrl-0 = <&pinctrl_esdhc1>; |
| 136 | cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; |
| 137 | bus-width = <4>; |
| 138 | status = "okay"; |
| 139 | }; |
| 140 | |
| 141 | &esdhc2 { |
| 142 | pinctrl-names = "default"; |
| 143 | pinctrl-0 = <&pinctrl_esdhc2>; |
| 144 | cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| 145 | bus-width = <4>; |
| 146 | status = "okay"; |
| 147 | }; |
| 148 | |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 149 | &fec { |
| 150 | pinctrl-names = "default"; |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 151 | pinctrl-0 = <&pinctrl_fec>; |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 152 | phy-mode = "rmii"; |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 153 | phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 154 | status = "okay"; |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 155 | }; |
| 156 | |
| 157 | &i2c2 { |
| 158 | pinctrl-names = "default"; |
| 159 | pinctrl-0 = <&pinctrl_i2c2>; |
| 160 | status = "okay"; |
| 161 | }; |
| 162 | |
| 163 | &ipu_di0_disp0 { |
| 164 | remote-endpoint = <&display0_in>; |
| 165 | }; |
| 166 | |
| 167 | &uart2 { |
| 168 | pinctrl-names = "default"; |
| 169 | pinctrl-0 = <&pinctrl_uart2>; |
| 170 | fsl,dte-mode; |
| 171 | status = "okay"; |
Patrick Bruenn | 98d62e6 | 2016-11-04 11:57:02 +0100 | [diff] [blame] | 172 | }; |
Steffen Dirkwinkel | ba1444e | 2019-10-23 07:40:41 +0200 | [diff] [blame] | 173 | |
| 174 | &usbh1 { |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 175 | vbus-supply = <®_usb_vbus>; |
Steffen Dirkwinkel | ba1444e | 2019-10-23 07:40:41 +0200 | [diff] [blame] | 176 | phy_type = "utmi"; |
| 177 | status = "okay"; |
| 178 | }; |
| 179 | |
| 180 | &usbotg { |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 181 | dr_mode = "peripheral"; |
Steffen Dirkwinkel | ba1444e | 2019-10-23 07:40:41 +0200 | [diff] [blame] | 182 | status = "okay"; |
| 183 | }; |
Marcel Ziswiler | 10f4f3f | 2022-10-22 23:59:40 +0200 | [diff] [blame] | 184 | |
| 185 | &vpu { |
| 186 | status = "okay"; |
| 187 | }; |
| 188 | |
| 189 | &iomuxc { |
| 190 | pinctrl-names = "default"; |
| 191 | pinctrl-0 = <&pinctrl_hog>; |
| 192 | |
| 193 | pinctrl_hog: hoggrp { |
| 194 | fsl,pins = < |
| 195 | MX53_PAD_GPIO_0__CCM_CLKO 0x1c4 |
| 196 | MX53_PAD_GPIO_16__I2C3_SDA 0x1c4 |
| 197 | MX53_PAD_EIM_D22__GPIO3_22 0x1c4 |
| 198 | MX53_PAD_EIM_D23__GPIO3_23 0x1e4 |
| 199 | MX53_PAD_EIM_D24__GPIO3_24 0x1e4 |
| 200 | >; |
| 201 | }; |
| 202 | |
| 203 | pinctrl_esdhc1: esdhc1grp { |
| 204 | fsl,pins = < |
| 205 | MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 |
| 206 | MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 |
| 207 | MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 |
| 208 | MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 |
| 209 | MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 |
| 210 | MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 |
| 211 | MX53_PAD_GPIO_1__ESDHC1_CD 0x1c4 |
| 212 | MX53_PAD_EIM_D17__GPIO3_17 0x1e4 |
| 213 | MX53_PAD_GPIO_3__GPIO1_3 0x1c4 |
| 214 | >; |
| 215 | }; |
| 216 | |
| 217 | pinctrl_esdhc2: esdhc2grp { |
| 218 | fsl,pins = < |
| 219 | MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 |
| 220 | MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 |
| 221 | MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 |
| 222 | MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 |
| 223 | MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 |
| 224 | MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 |
| 225 | MX53_PAD_GPIO_4__ESDHC2_CD 0x1e4 |
| 226 | MX53_PAD_EIM_D20__GPIO3_20 0x1e4 |
| 227 | MX53_PAD_GPIO_8__GPIO1_8 0x1c4 |
| 228 | >; |
| 229 | }; |
| 230 | |
| 231 | pinctrl_fec: fecgrp { |
| 232 | fsl,pins = < |
| 233 | MX53_PAD_FEC_MDC__FEC_MDC 0x4 |
| 234 | MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc |
| 235 | MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 |
| 236 | MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 |
| 237 | MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 |
| 238 | MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 |
| 239 | MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 |
| 240 | MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 |
| 241 | MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 |
| 242 | MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 |
| 243 | >; |
| 244 | }; |
| 245 | |
| 246 | pinctrl_i2c2: i2c2grp { |
| 247 | fsl,pins = < |
| 248 | MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 |
| 249 | MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 |
| 250 | >; |
| 251 | }; |
| 252 | |
| 253 | pinctrl_ipu_disp0: ipudisp0grp { |
| 254 | fsl,pins = < |
| 255 | MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5 |
| 256 | MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5 |
| 257 | MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5 |
| 258 | MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5 |
| 259 | MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 0x5 |
| 260 | MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5 |
| 261 | MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5 |
| 262 | MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5 |
| 263 | MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5 |
| 264 | MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5 |
| 265 | MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5 |
| 266 | MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5 |
| 267 | MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5 |
| 268 | MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5 |
| 269 | MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5 |
| 270 | MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5 |
| 271 | MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5 |
| 272 | MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5 |
| 273 | MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5 |
| 274 | MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5 |
| 275 | MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5 |
| 276 | MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5 |
| 277 | MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5 |
| 278 | MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5 |
| 279 | MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5 |
| 280 | MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5 |
| 281 | MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5 |
| 282 | MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5 |
| 283 | MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5 |
| 284 | >; |
| 285 | }; |
| 286 | |
| 287 | pinctrl_uart2: uart2grp { |
| 288 | fsl,pins = < |
| 289 | MX53_PAD_EIM_D26__UART2_RXD_MUX 0x1e4 |
| 290 | MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4 |
| 291 | MX53_PAD_EIM_D28__UART2_RTS 0x1e4 |
| 292 | MX53_PAD_EIM_D29__UART2_CTS 0x1e4 |
| 293 | >; |
| 294 | }; |
| 295 | }; |