blob: 3cae2a08677c38059d39772f1321da77b7501453 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Shaohui Xiee8297342015-10-26 19:47:54 +08002/*
3 * Copyright 2015 Freescale Semiconductor, Inc.
Shaohui Xiee8297342015-10-26 19:47:54 +08004 */
5#include <common.h>
Simon Glass90526e92020-05-10 11:39:56 -06006#include <net.h>
Shaohui Xiee8297342015-10-26 19:47:54 +08007#include <asm/io.h>
8#include <netdev.h>
9#include <fm_eth.h>
10#include <fsl_dtsec.h>
11#include <fsl_mdio.h>
12#include <malloc.h>
13
14#include "../common/fman.h"
15
Masahiro Yamadab75d8dc2020-06-26 15:13:33 +090016int board_eth_init(struct bd_info *bis)
Shaohui Xiee8297342015-10-26 19:47:54 +080017{
18#ifdef CONFIG_FMAN_ENET
19 int i;
20 struct memac_mdio_info dtsec_mdio_info;
21 struct memac_mdio_info tgec_mdio_info;
22 struct mii_dev *dev;
23 u32 srds_s1;
Tom Rini6cc04542022-10-28 20:27:13 -040024 struct ccsr_gur *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
Shaohui Xiee8297342015-10-26 19:47:54 +080025
26 srds_s1 = in_be32(&gur->rcwsr[4]) &
27 FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
28 srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
29
30 dtsec_mdio_info.regs =
31 (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
32
33 dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
34
35 /* Register the 1G MDIO bus */
36 fm_memac_mdio_init(bis, &dtsec_mdio_info);
37
38 tgec_mdio_info.regs =
39 (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
40 tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
41
42 /* Register the 10G MDIO bus */
43 fm_memac_mdio_init(bis, &tgec_mdio_info);
44
45 /* Set the two on-board RGMII PHY address */
46 fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
47 fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
48
49 /* QSGMII on lane B, MAC 1/2/5/6 */
50 fm_info_set_phy_address(FM1_DTSEC1, QSGMII_PORT1_PHY_ADDR);
51 fm_info_set_phy_address(FM1_DTSEC2, QSGMII_PORT2_PHY_ADDR);
52 fm_info_set_phy_address(FM1_DTSEC5, QSGMII_PORT3_PHY_ADDR);
53 fm_info_set_phy_address(FM1_DTSEC6, QSGMII_PORT4_PHY_ADDR);
54
55 switch (srds_s1) {
56 case 0x1455:
57 break;
58 default:
59 printf("Invalid SerDes protocol 0x%x for LS1043ARDB\n",
60 srds_s1);
61 break;
62 }
63
64 dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
Tom Rinicdc5ed82022-11-16 13:10:29 -050065 for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CFG_SYS_NUM_FM1_DTSEC; i++)
Shaohui Xiee8297342015-10-26 19:47:54 +080066 fm_info_set_mdio(i, dev);
67
Vladimir Oltean77b11f72021-09-18 15:32:34 +030068 /* 10GBase-R on lane A, MAC 9 */
Shaohui Xiee8297342015-10-26 19:47:54 +080069 fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
70 dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
71 fm_info_set_mdio(FM1_10GEC1, dev);
72
73 cpu_eth_init(bis);
74#endif
75
76 return pci_eth_init(bis);
77}