blob: 14db5ae02c67e0ad10f17e35342d43151502292c [file] [log] [blame]
Joe Hershbergerbd328eb2015-05-12 14:46:24 -05001CONFIG_ARM=y
2CONFIG_ARCH_SUNXI=y
3CONFIG_MACH_SUN6I=y
4CONFIG_DRAM_CLK=360
5CONFIG_DRAM_ZQ=122
Joe Hershbergerc9bb9422015-06-22 16:15:29 -05006CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
7CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
8CONFIG_AXP_GPIO=y
Siarhei Siamashkaaaa6ac52015-01-19 05:23:34 +02009CONFIG_VIDEO_LCD_MODE="x:768,y:1024,depth:18,pclk_khz:66000,le:56,ri:60,up:30,lo:36,hs:64,vs:50,sync:3,vmode:0"
Joe Hershbergerbd328eb2015-05-12 14:46:24 -050010CONFIG_VIDEO_LCD_BL_EN="PA25"
11CONFIG_VIDEO_LCD_BL_PWM="PH13"
Siarhei Siamashkaaaa6ac52015-01-19 05:23:34 +020012CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
Joe Hershbergerbd328eb2015-05-12 14:46:24 -050013CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81"
Joe Hershbergerc9bb9422015-06-22 16:15:29 -050014# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
Joe Hershbergerbd328eb2015-05-12 14:46:24 -050015CONFIG_SPL=y
Tom Riniadad96e2016-04-21 21:37:19 -040016CONFIG_HUSH_PARSER=y
Tom Rini89cb2b52016-04-24 17:29:26 -040017CONFIG_CMD_BOOTZ=y
Joe Hershbergeref0f2f52015-06-22 16:15:30 -050018# CONFIG_CMD_IMLS is not set
19# CONFIG_CMD_FLASH is not set
Tom Rini89cb2b52016-04-24 17:29:26 -040020CONFIG_CMD_MMC=y
Joe Hershbergeref0f2f52015-06-22 16:15:30 -050021# CONFIG_CMD_FPGA is not set
Tom Rini78d1e1d2016-04-22 16:41:25 -040022CONFIG_CMD_DHCP=y
Tom Rini89cb2b52016-04-24 17:29:26 -040023CONFIG_CMD_MII=y
Tom Rini78d1e1d2016-04-22 16:41:25 -040024CONFIG_CMD_PING=y
Tom Rini89cb2b52016-04-24 17:29:26 -040025CONFIG_CMD_EXT2=y
26CONFIG_CMD_EXT4=y
27CONFIG_CMD_FAT=y
28CONFIG_CMD_FS_GENERIC=y
Hans de Goede40117522015-09-30 15:22:42 +020029CONFIG_AXP_DLDO1_VOLT=3300
Bin Meng80df6912015-09-28 05:14:15 -070030CONFIG_USB_MUSB_HOST=y
Siarhei Siamashkaaaa6ac52015-01-19 05:23:34 +020031CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
32CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
33CONFIG_VIDEO_LCD_SPI_CS="PH9"
34CONFIG_VIDEO_LCD_SPI_SCLK="PH10"
35CONFIG_VIDEO_LCD_SPI_MOSI="PH11"
36CONFIG_VIDEO_LCD_SPI_MISO="PH12"