blob: e5d5c4637b0cd48b3722d7a7235d89a9a5b6689f [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Veli-Pekka Peltolac1393bb2012-07-09 03:14:50 +00002/*
3 * Bluegiga APX4 Development Kit
4 *
5 * Copyright (C) 2012 Bluegiga Technologies Oy
6 *
7 * Authors:
8 * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
9 * Lauri Hintsala <lauri.hintsala@bluegiga.com>
10 *
11 * Based on spl_boot.c:
12 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
13 * on behalf of DENX Software Engineering GmbH
Veli-Pekka Peltolac1393bb2012-07-09 03:14:50 +000014 */
15
16#include <common.h>
17#include <config.h>
18#include <asm/gpio.h>
19#include <asm/io.h>
20#include <asm/arch/iomux-mx28.h>
21#include <asm/arch/imx-regs.h>
22#include <asm/arch/sys_proto.h>
23
24#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
25#define MUX_CONFIG_GPMI (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
26#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
27#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
28
29const iomux_cfg_t iomux_setup[] = {
30 /* DUART */
31 MX28_PAD_PWM0__DUART_RX,
32 MX28_PAD_PWM1__DUART_TX,
33
34 /* LED */
35 MX28_PAD_PWM3__GPIO_3_28,
36
37 /* MMC0 */
38 MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
39 MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
40 MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
41 MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
42 MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
43 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
44 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_NOPULL),
45 MX28_PAD_SSP0_SCK__SSP0_SCK |
46 (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
47
48 /* GPMI NAND */
49 MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
50 MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
51 MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
52 MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
53 MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
54 MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
55 MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
56 MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
57 MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
58 MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
59 MX28_PAD_GPMI_RDN__GPMI_RDN |
60 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
61 MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
62 MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
63 MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
64 MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
65
66 /* FEC0 */
67 MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
68 MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
69 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
70 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
71 MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
72 MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
73 MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
74 MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
75 MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
76
77 /* I2C */
78 MX28_PAD_I2C0_SCL__I2C0_SCL,
79 MX28_PAD_I2C0_SDA__I2C0_SDA,
80
81 /* EMI */
82 MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
83 MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
84 MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
85 MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
86 MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
87 MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
88 MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
89 MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
90 MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
91 MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
92 MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
93 MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
94 MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
95 MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
96 MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
97 MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
98 MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
99 MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
100 MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
101 MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
102 MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
103 MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
104 MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
105 MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
106 MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
107
108 MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
109 MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
110 MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
111 MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
112 MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
113 MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
114 MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
115 MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
116 MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
117 MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
118 MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
119 MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
120 MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
121 MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
122 MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
123 MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
124 MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
125 MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
126 MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
127 MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
128 MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
129 MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
130 MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
131 MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
132};
133
Marek Vasut7b8657e2013-08-31 15:53:44 +0200134void board_init_ll(const uint32_t arg, const uint32_t *resptr)
Veli-Pekka Peltolac1393bb2012-07-09 03:14:50 +0000135{
Marek Vasut7b8657e2013-08-31 15:53:44 +0200136 mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
Veli-Pekka Peltolac1393bb2012-07-09 03:14:50 +0000137
138 /* switch LED on */
139 gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
140}
141
Otavio Salvador1e0cf5c2012-08-05 09:05:32 +0000142void mxs_adjust_memory_params(uint32_t *dram_vals)
Veli-Pekka Peltolac1393bb2012-07-09 03:14:50 +0000143{
144 /*
145 * All address lines are routed from CPU to memory chip.
146 * ADDR_PINS field is set to zero.
147 */
148 dram_vals[0x74 >> 2] = 0x0f02000a;
149
150 /* Used memory has 4 banks. EIGHT_BANK_MODE bit is disabled. */
151 dram_vals[0x7c >> 2] = 0x00000101;
152}