David Wu | 8fb3268 | 2019-07-11 10:37:14 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * (C) Copyright 2019 Rockchip Electronics Co., Ltd |
| 4 | */ |
| 5 | |
| 6 | #include <common.h> |
| 7 | #include <dm.h> |
Simon Glass | f7ae49f | 2020-05-10 11:40:05 -0600 | [diff] [blame] | 8 | #include <log.h> |
David Wu | 8fb3268 | 2019-07-11 10:37:14 +0200 | [diff] [blame] | 9 | #include <dm/pinctrl.h> |
| 10 | #include <regmap.h> |
| 11 | #include <syscon.h> |
Simon Glass | cd93d62 | 2020-05-10 11:40:13 -0600 | [diff] [blame] | 12 | #include <linux/bitops.h> |
David Wu | 8fb3268 | 2019-07-11 10:37:14 +0200 | [diff] [blame] | 13 | |
| 14 | #include "pinctrl-rockchip.h" |
| 15 | |
| 16 | static struct rockchip_mux_route_data px30_mux_route_data[] = { |
| 17 | { |
| 18 | /* cif-d2m0 */ |
| 19 | .bank_num = 2, |
| 20 | .pin = 0, |
| 21 | .func = 1, |
| 22 | .route_offset = 0x184, |
| 23 | .route_val = BIT(16 + 7), |
| 24 | }, { |
| 25 | /* cif-d2m1 */ |
| 26 | .bank_num = 3, |
| 27 | .pin = 3, |
| 28 | .func = 3, |
| 29 | .route_offset = 0x184, |
| 30 | .route_val = BIT(16 + 7) | BIT(7), |
| 31 | }, { |
| 32 | /* pdm-m0 */ |
| 33 | .bank_num = 3, |
| 34 | .pin = 22, |
| 35 | .func = 2, |
| 36 | .route_offset = 0x184, |
| 37 | .route_val = BIT(16 + 8), |
| 38 | }, { |
| 39 | /* pdm-m1 */ |
| 40 | .bank_num = 2, |
| 41 | .pin = 22, |
| 42 | .func = 1, |
| 43 | .route_offset = 0x184, |
| 44 | .route_val = BIT(16 + 8) | BIT(8), |
| 45 | }, { |
| 46 | /* uart2-rxm0 */ |
| 47 | .bank_num = 1, |
| 48 | .pin = 27, |
| 49 | .func = 2, |
| 50 | .route_offset = 0x184, |
| 51 | .route_val = BIT(16 + 10), |
| 52 | }, { |
| 53 | /* uart2-rxm1 */ |
| 54 | .bank_num = 2, |
| 55 | .pin = 14, |
| 56 | .func = 2, |
| 57 | .route_offset = 0x184, |
| 58 | .route_val = BIT(16 + 10) | BIT(10), |
| 59 | }, { |
| 60 | /* uart3-rxm0 */ |
| 61 | .bank_num = 0, |
| 62 | .pin = 17, |
| 63 | .func = 2, |
| 64 | .route_offset = 0x184, |
| 65 | .route_val = BIT(16 + 9), |
| 66 | }, { |
| 67 | /* uart3-rxm1 */ |
| 68 | .bank_num = 1, |
| 69 | .pin = 15, |
| 70 | .func = 2, |
| 71 | .route_offset = 0x184, |
| 72 | .route_val = BIT(16 + 9) | BIT(9), |
| 73 | }, |
| 74 | }; |
| 75 | |
| 76 | static int px30_set_mux(struct rockchip_pin_bank *bank, int pin, int mux) |
| 77 | { |
| 78 | struct rockchip_pinctrl_priv *priv = bank->priv; |
| 79 | int iomux_num = (pin / 8); |
| 80 | struct regmap *regmap; |
| 81 | int reg, ret, mask, mux_type; |
| 82 | u8 bit; |
| 83 | u32 data, route_reg, route_val; |
| 84 | |
| 85 | regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU) |
| 86 | ? priv->regmap_pmu : priv->regmap_base; |
| 87 | |
| 88 | /* get basic quadrupel of mux registers and the correct reg inside */ |
| 89 | mux_type = bank->iomux[iomux_num].type; |
| 90 | reg = bank->iomux[iomux_num].offset; |
| 91 | reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask); |
| 92 | |
| 93 | if (bank->route_mask & BIT(pin)) { |
| 94 | if (rockchip_get_mux_route(bank, pin, mux, &route_reg, |
| 95 | &route_val)) { |
| 96 | ret = regmap_write(regmap, route_reg, route_val); |
| 97 | if (ret) |
| 98 | return ret; |
| 99 | } |
| 100 | } |
| 101 | |
| 102 | data = (mask << (bit + 16)); |
| 103 | data |= (mux & mask) << bit; |
| 104 | ret = regmap_write(regmap, reg, data); |
| 105 | |
| 106 | return ret; |
| 107 | } |
| 108 | |
| 109 | #define PX30_PULL_PMU_OFFSET 0x10 |
| 110 | #define PX30_PULL_GRF_OFFSET 0x60 |
| 111 | #define PX30_PULL_BITS_PER_PIN 2 |
| 112 | #define PX30_PULL_PINS_PER_REG 8 |
| 113 | #define PX30_PULL_BANK_STRIDE 16 |
| 114 | |
| 115 | static void px30_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, |
| 116 | int pin_num, struct regmap **regmap, |
| 117 | int *reg, u8 *bit) |
| 118 | { |
| 119 | struct rockchip_pinctrl_priv *priv = bank->priv; |
| 120 | |
| 121 | /* The first 32 pins of the first bank are located in PMU */ |
| 122 | if (bank->bank_num == 0) { |
| 123 | *regmap = priv->regmap_pmu; |
| 124 | *reg = PX30_PULL_PMU_OFFSET; |
| 125 | } else { |
| 126 | *regmap = priv->regmap_base; |
| 127 | *reg = PX30_PULL_GRF_OFFSET; |
| 128 | |
| 129 | /* correct the offset, as we're starting with the 2nd bank */ |
| 130 | *reg -= 0x10; |
| 131 | *reg += bank->bank_num * PX30_PULL_BANK_STRIDE; |
| 132 | } |
| 133 | |
| 134 | *reg += ((pin_num / PX30_PULL_PINS_PER_REG) * 4); |
| 135 | *bit = (pin_num % PX30_PULL_PINS_PER_REG); |
| 136 | *bit *= PX30_PULL_BITS_PER_PIN; |
| 137 | } |
| 138 | |
| 139 | static int px30_set_pull(struct rockchip_pin_bank *bank, |
| 140 | int pin_num, int pull) |
| 141 | { |
| 142 | struct regmap *regmap; |
| 143 | int reg, ret; |
| 144 | u8 bit, type; |
| 145 | u32 data; |
| 146 | |
| 147 | if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT) |
| 148 | return -ENOTSUPP; |
| 149 | |
| 150 | px30_calc_pull_reg_and_bit(bank, pin_num, ®map, ®, &bit); |
| 151 | type = bank->pull_type[pin_num / 8]; |
| 152 | ret = rockchip_translate_pull_value(type, pull); |
| 153 | if (ret < 0) { |
| 154 | debug("unsupported pull setting %d\n", pull); |
| 155 | return ret; |
| 156 | } |
| 157 | |
| 158 | /* enable the write to the equivalent lower bits */ |
| 159 | data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16); |
| 160 | data |= (ret << bit); |
| 161 | ret = regmap_write(regmap, reg, data); |
| 162 | |
| 163 | return ret; |
| 164 | } |
| 165 | |
| 166 | #define PX30_DRV_PMU_OFFSET 0x20 |
| 167 | #define PX30_DRV_GRF_OFFSET 0xf0 |
| 168 | #define PX30_DRV_BITS_PER_PIN 2 |
| 169 | #define PX30_DRV_PINS_PER_REG 8 |
| 170 | #define PX30_DRV_BANK_STRIDE 16 |
| 171 | |
| 172 | static void px30_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, |
| 173 | int pin_num, struct regmap **regmap, |
| 174 | int *reg, u8 *bit) |
| 175 | { |
| 176 | struct rockchip_pinctrl_priv *priv = bank->priv; |
| 177 | |
| 178 | /* The first 32 pins of the first bank are located in PMU */ |
| 179 | if (bank->bank_num == 0) { |
| 180 | *regmap = priv->regmap_pmu; |
| 181 | *reg = PX30_DRV_PMU_OFFSET; |
| 182 | } else { |
| 183 | *regmap = priv->regmap_base; |
| 184 | *reg = PX30_DRV_GRF_OFFSET; |
| 185 | |
| 186 | /* correct the offset, as we're starting with the 2nd bank */ |
| 187 | *reg -= 0x10; |
| 188 | *reg += bank->bank_num * PX30_DRV_BANK_STRIDE; |
| 189 | } |
| 190 | |
| 191 | *reg += ((pin_num / PX30_DRV_PINS_PER_REG) * 4); |
| 192 | *bit = (pin_num % PX30_DRV_PINS_PER_REG); |
| 193 | *bit *= PX30_DRV_BITS_PER_PIN; |
| 194 | } |
| 195 | |
| 196 | static int px30_set_drive(struct rockchip_pin_bank *bank, |
| 197 | int pin_num, int strength) |
| 198 | { |
| 199 | struct regmap *regmap; |
| 200 | int reg, ret; |
| 201 | u32 data, rmask_bits, temp; |
| 202 | u8 bit; |
| 203 | int drv_type = bank->drv[pin_num / 8].drv_type; |
| 204 | |
| 205 | px30_calc_drv_reg_and_bit(bank, pin_num, ®map, ®, &bit); |
| 206 | ret = rockchip_translate_drive_value(drv_type, strength); |
| 207 | if (ret < 0) { |
| 208 | debug("unsupported driver strength %d\n", strength); |
| 209 | return ret; |
| 210 | } |
| 211 | |
| 212 | switch (drv_type) { |
| 213 | case DRV_TYPE_IO_1V8_3V0_AUTO: |
| 214 | case DRV_TYPE_IO_3V3_ONLY: |
| 215 | rmask_bits = ROCKCHIP_DRV_3BITS_PER_PIN; |
| 216 | switch (bit) { |
| 217 | case 0 ... 12: |
| 218 | /* regular case, nothing to do */ |
| 219 | break; |
| 220 | case 15: |
| 221 | /* |
| 222 | * drive-strength offset is special, as it is spread |
| 223 | * over 2 registers, the bit data[15] contains bit 0 |
| 224 | * of the value while temp[1:0] contains bits 2 and 1 |
| 225 | */ |
| 226 | data = (ret & 0x1) << 15; |
| 227 | temp = (ret >> 0x1) & 0x3; |
| 228 | |
| 229 | data |= BIT(31); |
| 230 | ret = regmap_write(regmap, reg, data); |
| 231 | if (ret) |
| 232 | return ret; |
| 233 | |
| 234 | temp |= (0x3 << 16); |
| 235 | reg += 0x4; |
| 236 | ret = regmap_write(regmap, reg, temp); |
| 237 | |
| 238 | return ret; |
| 239 | case 18 ... 21: |
| 240 | /* setting fully enclosed in the second register */ |
| 241 | reg += 4; |
| 242 | bit -= 16; |
| 243 | break; |
| 244 | default: |
| 245 | debug("unsupported bit: %d for pinctrl drive type: %d\n", |
| 246 | bit, drv_type); |
| 247 | return -EINVAL; |
| 248 | } |
| 249 | break; |
| 250 | case DRV_TYPE_IO_DEFAULT: |
| 251 | case DRV_TYPE_IO_1V8_OR_3V0: |
| 252 | case DRV_TYPE_IO_1V8_ONLY: |
| 253 | rmask_bits = ROCKCHIP_DRV_BITS_PER_PIN; |
| 254 | break; |
| 255 | default: |
| 256 | debug("unsupported pinctrl drive type: %d\n", |
| 257 | drv_type); |
| 258 | return -EINVAL; |
| 259 | } |
| 260 | |
| 261 | /* enable the write to the equivalent lower bits */ |
| 262 | data = ((1 << rmask_bits) - 1) << (bit + 16); |
| 263 | data |= (ret << bit); |
| 264 | ret = regmap_write(regmap, reg, data); |
| 265 | |
| 266 | return ret; |
| 267 | } |
| 268 | |
| 269 | #define PX30_SCHMITT_PMU_OFFSET 0x38 |
| 270 | #define PX30_SCHMITT_GRF_OFFSET 0xc0 |
| 271 | #define PX30_SCHMITT_PINS_PER_PMU_REG 16 |
| 272 | #define PX30_SCHMITT_BANK_STRIDE 16 |
| 273 | #define PX30_SCHMITT_PINS_PER_GRF_REG 8 |
| 274 | |
| 275 | static int px30_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank, |
| 276 | int pin_num, |
| 277 | struct regmap **regmap, |
| 278 | int *reg, u8 *bit) |
| 279 | { |
| 280 | struct rockchip_pinctrl_priv *priv = bank->priv; |
| 281 | int pins_per_reg; |
| 282 | |
| 283 | if (bank->bank_num == 0) { |
| 284 | *regmap = priv->regmap_pmu; |
| 285 | *reg = PX30_SCHMITT_PMU_OFFSET; |
| 286 | pins_per_reg = PX30_SCHMITT_PINS_PER_PMU_REG; |
| 287 | } else { |
| 288 | *regmap = priv->regmap_base; |
| 289 | *reg = PX30_SCHMITT_GRF_OFFSET; |
| 290 | pins_per_reg = PX30_SCHMITT_PINS_PER_GRF_REG; |
| 291 | *reg += (bank->bank_num - 1) * PX30_SCHMITT_BANK_STRIDE; |
| 292 | } |
| 293 | *reg += ((pin_num / pins_per_reg) * 4); |
| 294 | *bit = pin_num % pins_per_reg; |
| 295 | |
| 296 | return 0; |
| 297 | } |
| 298 | |
| 299 | static int px30_set_schmitt(struct rockchip_pin_bank *bank, |
| 300 | int pin_num, int enable) |
| 301 | { |
| 302 | struct regmap *regmap; |
| 303 | int reg; |
| 304 | u8 bit; |
| 305 | u32 data; |
| 306 | |
| 307 | px30_calc_schmitt_reg_and_bit(bank, pin_num, ®map, ®, &bit); |
| 308 | /* enable the write to the equivalent lower bits */ |
| 309 | data = BIT(bit + 16) | (enable << bit); |
| 310 | |
| 311 | return regmap_write(regmap, reg, data); |
| 312 | } |
| 313 | |
| 314 | static struct rockchip_pin_bank px30_pin_banks[] = { |
| 315 | PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU, |
| 316 | IOMUX_SOURCE_PMU, |
| 317 | IOMUX_SOURCE_PMU, |
| 318 | IOMUX_SOURCE_PMU |
| 319 | ), |
| 320 | PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_WIDTH_4BIT, |
| 321 | IOMUX_WIDTH_4BIT, |
| 322 | IOMUX_WIDTH_4BIT, |
| 323 | IOMUX_WIDTH_4BIT |
| 324 | ), |
| 325 | PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", IOMUX_WIDTH_4BIT, |
| 326 | IOMUX_WIDTH_4BIT, |
| 327 | IOMUX_WIDTH_4BIT, |
| 328 | IOMUX_WIDTH_4BIT |
| 329 | ), |
| 330 | PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_WIDTH_4BIT, |
| 331 | IOMUX_WIDTH_4BIT, |
| 332 | IOMUX_WIDTH_4BIT, |
| 333 | IOMUX_WIDTH_4BIT |
| 334 | ), |
| 335 | }; |
| 336 | |
| 337 | static struct rockchip_pin_ctrl px30_pin_ctrl = { |
| 338 | .pin_banks = px30_pin_banks, |
| 339 | .nr_banks = ARRAY_SIZE(px30_pin_banks), |
| 340 | .grf_mux_offset = 0x0, |
| 341 | .pmu_mux_offset = 0x0, |
| 342 | .grf_drv_offset = 0xf0, |
| 343 | .pmu_drv_offset = 0x20, |
| 344 | .iomux_routes = px30_mux_route_data, |
| 345 | .niomux_routes = ARRAY_SIZE(px30_mux_route_data), |
| 346 | .set_mux = px30_set_mux, |
| 347 | .set_pull = px30_set_pull, |
| 348 | .set_drive = px30_set_drive, |
| 349 | .set_schmitt = px30_set_schmitt, |
| 350 | }; |
| 351 | |
| 352 | static const struct udevice_id px30_pinctrl_ids[] = { |
| 353 | { |
| 354 | .compatible = "rockchip,px30-pinctrl", |
| 355 | .data = (ulong)&px30_pin_ctrl |
| 356 | }, |
| 357 | { } |
| 358 | }; |
| 359 | |
| 360 | U_BOOT_DRIVER(pinctrl_px30) = { |
| 361 | .name = "rockchip_px30_pinctrl", |
| 362 | .id = UCLASS_PINCTRL, |
| 363 | .of_match = px30_pinctrl_ids, |
| 364 | .priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv), |
| 365 | .ops = &rockchip_pinctrl_ops, |
| 366 | #if !CONFIG_IS_ENABLED(OF_PLATDATA) |
| 367 | .bind = dm_scan_fdt_dev, |
| 368 | #endif |
| 369 | .probe = rockchip_pinctrl_probe, |
| 370 | }; |