blob: cb0d2413f931c3d07721b9a9c0c2e38fa3660ef7 [file] [log] [blame]
Stefanbfacf462011-12-23 06:35:04 +00001/*
2 * Copyright (C) 2011
Stefan Herbrechtsmeier16437a12014-12-28 14:09:50 +01003 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Stefanbfacf462011-12-23 06:35:04 +00004 *
5 * Based on Kirkwood support:
6 * (C) Copyright 2009
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
Stefanbfacf462011-12-23 06:35:04 +000011 */
12
13#ifndef _CONFIG_DNS325_H
14#define _CONFIG_DNS325_H
15
16/*
17 * Machine number definition
18 */
Stefanbfacf462011-12-23 06:35:04 +000019#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
Stefanbfacf462011-12-23 06:35:04 +000020
21/*
22 * High Level Configuration Options (easy to change)
23 */
24#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
Stefanbfacf462011-12-23 06:35:04 +000025#define CONFIG_KW88F6281 /* SOC Name */
26#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
27
28/*
29 * Commands configuration
30 */
Stefanbfacf462011-12-23 06:35:04 +000031#define CONFIG_SYS_MVFS
32
33#define CONFIG_NR_DRAM_BANKS 1
34
35/*
36 * mv-common.h should be defined after CMD configs since it used them
37 * to enable certain macros
38 */
39#include "mv-common.h"
40
41/* Remove or override few declarations from mv-common.h */
Stefanbfacf462011-12-23 06:35:04 +000042
43/*
44 * Ethernet Driver configuration
45 */
46#ifdef CONFIG_CMD_NET
47#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
48#define CONFIG_NETCONSOLE
49#endif
50
51/*
52 * SATA Driver configuration
53 */
54#ifdef CONFIG_MVSATA_IDE
55#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
56#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
57#endif
58
59/*
60 * RTC driver configuration
61 */
62#ifdef CONFIG_CMD_DATE
63#define CONFIG_RTC_MV
64#endif
65
66/*
67 * Enable GPI0 support
68 */
69#define CONFIG_KIRKWOOD_GPIO
70
71/*
Stefanbfacf462011-12-23 06:35:04 +000072 * Environment variables configurations
73 */
74#ifdef CONFIG_CMD_NAND
Stefanbfacf462011-12-23 06:35:04 +000075#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
Stefanbfacf462011-12-23 06:35:04 +000076#endif
77
78#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
79#define CONFIG_ENV_ADDR 0xe0000
80#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
81
82/*
83 * Default environment variables
84 */
Stefanbfacf462011-12-23 06:35:04 +000085
86#define CONFIG_EXTRA_ENV_SETTINGS \
87 "stdin=serial\0" \
88 "stdout=serial\0" \
89 "stderr=serial\0" \
90 "loadaddr=0x800000\0" \
91 "autoload=no\0" \
92 "console=ttyS0,115200\0" \
Tom Rini43ede0b2017-10-22 17:55:07 -040093 "mtdparts="CONFIG_MTDPARTS_DEFAULT \
Stefanbfacf462011-12-23 06:35:04 +000094 "optargs=\0" \
95 "bootenv=uEnv.txt\0" \
96 "importbootenv=echo Importing environment ...; " \
97 "env import -t ${loadaddr} ${filesize}\0" \
98 "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
99 "setbootargs=setenv bootargs console=${console} " \
100 "${optargs} " \
101 "${mtdparts} " \
102 "root=${bootenvroot} " \
103 "rootfstype=${bootenvrootfstype}\0" \
104 "subbootcmd=run setbootargs; " \
105 "if run bootenvloadimage; then " \
106 "bootm ${loadaddr};" \
107 "fi;\0" \
108 "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
109 "nandrootfstype=ubifs\0" \
110 "nandloadimage=nand read ${loadaddr} kernel\0" \
111 "setnandbootenv=echo Booting from nand ...; " \
112 "setenv bootenvroot ${nandroot}; " \
113 "setenv bootenvrootfstype ${nandrootfstype}; " \
114 "setenv bootenvloadimage ${nandloadimage}\0"
115
116#define CONFIG_BOOTCOMMAND \
117 "if test -n ${bootenv} && usb start; then " \
118 "if run loadbootenv; then " \
119 "echo Loaded environment ${bootenv} from usb;" \
120 "run importbootenv;" \
121 "fi;" \
122 "if test -n ${bootenvcmd}; then " \
123 "echo Running bootenvcmd ...;" \
124 "run bootenvcmd;" \
125 "fi;" \
126 "fi;" \
127 "run setnandbootenv subbootcmd;"
128
129#endif /* _CONFIG_DNS325_H */