blob: 9f06957d2ff2df864092808dd41f205ca34eb8de [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
wdenk414eec32005-04-02 22:37:54 +00002 * (C) Copyright 2001-2005
wdenkc6097192002-11-03 00:24:07 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * configuration options, board specific, for Siemens Card Controller Module
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31#undef CCM_80MHz /* define for 80 MHz CPU only */
32
33/*
34 * High Level Configuration Options
35 * (easy to change)
36 */
37
38#define CONFIG_MPC860 1 /* This is a MPC860 CPU ... */
39#define CONFIG_CCM 1 /* on a Card Controller Module */
40
41#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
42#undef CONFIG_8xx_CONS_SMC2
43#undef CONFIG_8xx_CONS_NONE
44
45/* ENVIRONMENT */
46
47#define CONFIG_BAUDRATE 19200 /* console baudrate in bps */
48#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
wdenkc6097192002-11-03 00:24:07 +000049
50#define CONFIG_IPADDR 192.168.0.42
51#define CONFIG_NETMASK 255.255.255.0
52#define CONFIG_GATEWAYIP 0.0.0.0
53#define CONFIG_SERVERIP 192.168.0.254
54
55#define CONFIG_HOSTNAME CCM
56
57#define CONFIG_LOADADDR 40180000
58
59#undef CONFIG_BOOTARGS
60
61#define CONFIG_BOOTCOMMAND "setenv bootargs " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010062 "mem=${mem} " \
63 "root=/dev/ram rw ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \
wdenk8bde7f72003-06-27 21:31:46 +000064 "wt_8xx=timeout:3600; " \
65 "bootm"
wdenkc6097192002-11-03 00:24:07 +000066
67#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
68#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
69
70#define CONFIG_WATCHDOG 1 /* watchdog enabled */
71
72#undef CONFIG_STATUS_LED /* Status LED disabled */
73
74#define CONFIG_PRAM 512 /* reserve 512kB "protected RAM"*/
75
76#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
77
78#define CONFIG_SPI /* enable SPI driver */
79#define CONFIG_SPI_X /* 16 bit EEPROM addressing */
80
81/* ----------------------------------------------------------------
82 * Offset to initial SPI buffers in DPRAM (used if the environment
83 * is in the SPI EEPROM): We need a 520 byte scratch DPRAM area to
84 * use at an early stage. It is used between the two initialization
85 * calls (spi_init_f() and spi_init_r()). The value 0xB00 makes it
86 * far enough from the start of the data area (as well as from the
87 * stack pointer).
88 * ---------------------------------------------------------------- */
89#define CFG_SPI_INIT_OFFSET 0xB00
90
91#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 32-byte page size */
92
93
94#define CONFIG_MAC_PARTITION /* nod used yet */
95#define CONFIG_DOS_PARTITION
96
Jon Loeliger5d2ebe12007-07-09 21:16:53 -050097/*
98 * BOOTP options
99 */
100#define CONFIG_BOOTP_SUBNETMASK
101#define CONFIG_BOOTP_GATEWAY
102#define CONFIG_BOOTP_HOSTNAME
103#define CONFIG_BOOTP_BOOTPATH
104#define CONFIG_BOOTP_BOOTFILESIZE
wdenkc6097192002-11-03 00:24:07 +0000105
wdenkc6097192002-11-03 00:24:07 +0000106
Jon Loeliger49cf7e82007-07-05 19:52:35 -0500107/*
108 * Command line configuration.
109 */
110#include <config_cmd_default.h>
wdenkc6097192002-11-03 00:24:07 +0000111
Jon Loeliger49cf7e82007-07-05 19:52:35 -0500112#define CONFIG_CMD_BSP
113#define CONFIG_CMD_DHCP
114#define CONFIG_CMD_DATE
115#define CONFIG_CMD_EEPROM
116#define CONFIG_CMD_NFS
117#define CONFIG_CMD_SNTP
118
wdenkc6097192002-11-03 00:24:07 +0000119
120/*
121 * Miscellaneous configurable options
122 */
123#define CFG_LONGHELP /* undef to save memory */
124#define CFG_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeliger49cf7e82007-07-05 19:52:35 -0500125#if defined(CONFIG_CMD_KGDB)
wdenkc6097192002-11-03 00:24:07 +0000126#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
127#else
128#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
129#endif
130#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
131#define CFG_MAXARGS 16 /* max number of command args */
132#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
133
134#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
135#define CFG_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */
136
137#define CFG_LOAD_ADDR 0x00100000 /* default load address */
138
139/* Ethernet hardware configuration done using port pins */
140#define CFG_PA_ETH_RESET 0x0200 /* PA 6 */
141#define CFG_PA_ETH_MDDIS 0x4000 /* PA 1 */
142#define CFG_PB_ETH_POWERDOWN 0x00000800 /* PB 20 */
143#define CFG_PB_ETH_CFG1 0x00000400 /* PB 21 */
144#define CFG_PB_ETH_CFG2 0x00000200 /* PB 22 */
145#define CFG_PB_ETH_CFG3 0x00000100 /* PB 23 */
146
147/* Ethernet settings:
148 * MDIO not disabled, autonegotiation, 10/100Mbps, half/full duplex
149 */
150#define CFG_ETH_MDDIS_VALUE 0
151#define CFG_ETH_CFG1_VALUE 1
152#define CFG_ETH_CFG2_VALUE 1
153#define CFG_ETH_CFG3_VALUE 1
154
155/* PUMA configuration */
156#define CFG_PC_PUMA_PROG 0x0200 /* PC 6 */
157#define CFG_PC_PUMA_DONE 0x0008 /* PC 12 */
158#define CFG_PC_PUMA_INIT 0x0004 /* PC 13 */
159
160#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
161
162#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
163
164/*
165 * Low Level Configuration Settings
166 * (address mappings, register initial values, etc.)
167 * You should know what you are doing if you make changes here.
168 */
169/*-----------------------------------------------------------------------
170 * Internal Memory Mapped Register
171 */
172#define CFG_IMMR 0xF0000000
173
174/*-----------------------------------------------------------------------
175 * Definitions for initial stack pointer and data area (in DPRAM)
176 */
177#define CFG_INIT_RAM_ADDR CFG_IMMR
178#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
179#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
180#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
181#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
182
183/*-----------------------------------------------------------------------
184 * Address accessed to reset the board - must not be mapped/assigned
185 */
186#define CFG_RESET_ADDRESS 0xFEFFFFFF
187
188/*-----------------------------------------------------------------------
189 * Start addresses for the final memory configuration
190 * (Set up by the startup code)
191 * Please note that CFG_SDRAM_BASE _must_ start at 0
192 */
193#define CFG_SDRAM_BASE 0x00000000
194#define CFG_FLASH_BASE 0x40000000
195#if defined(DEBUG)
196#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
197#else
198#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
199#endif
200#define CFG_MONITOR_BASE CFG_FLASH_BASE
201#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
202
203/*
204 * For booting Linux, the board info and command line data
205 * have to be in the first 8 MB of memory, since this is
206 * the maximum mapped by the Linux kernel during initialization.
207 */
208#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
209
210/*-----------------------------------------------------------------------
211 * FLASH organization
212 */
213#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
214#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
215
216#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
217#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
218
219#if 1
220/* Start port with environment in flash; switch to SPI EEPROM later */
221#define CFG_ENV_IS_IN_FLASH 1
222#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
223#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
wdenk6aff3112002-12-17 01:51:00 +0000224
225/* Address and size of Redundant Environment Sector */
226#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
227#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
wdenkc6097192002-11-03 00:24:07 +0000228#else
229/* Final version: environment in EEPROM */
230#define CFG_ENV_IS_IN_EEPROM 1
231#define CFG_ENV_OFFSET 2048
232#define CFG_ENV_SIZE 2048
233#endif
234
235/*-----------------------------------------------------------------------
236 * Hardware Information Block
237 */
238#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
239#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
240#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
241
242/*-----------------------------------------------------------------------
243 * Cache Configuration
244 */
245#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
246#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
247
248/*-----------------------------------------------------------------------
249 * SYPCR - System Protection Control 11-9
250 * SYPCR can only be written once after reset!
251 *-----------------------------------------------------------------------
252 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
253 */
254#if defined(CONFIG_WATCHDOG)
255#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
256 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
257#else
wdenk6aff3112002-12-17 01:51:00 +0000258#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
259 SYPCR_SWP)
wdenkc6097192002-11-03 00:24:07 +0000260#endif
261
262/*-----------------------------------------------------------------------
263 * SIUMCR - SIU Module Configuration 11-6
264 *-----------------------------------------------------------------------
265 * we must activate GPL5 in the SIUMCR for CAN
266 */
267#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
268
269/*-----------------------------------------------------------------------
270 * TBSCR - Time Base Status and Control 11-26
271 *-----------------------------------------------------------------------
272 * Clear Reference Interrupt Status, Timebase freezing enabled
273 */
274#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
275
276/*-----------------------------------------------------------------------
277 * RTCSC - Real-Time Clock Status and Control Register 11-27
278 *-----------------------------------------------------------------------
279 */
280#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
281
282/*-----------------------------------------------------------------------
283 * PISCR - Periodic Interrupt Status and Control 11-31
284 *-----------------------------------------------------------------------
285 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
286 */
287#define CFG_PISCR (PISCR_PS | PISCR_PITF)
288
289/*-----------------------------------------------------------------------
290 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
291 *-----------------------------------------------------------------------
292 * Reset PLL lock status sticky bit, timer expired status bit and timer
293 * interrupt status bit
294 *
295 * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
296 */
297#ifdef CCM_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
298#define CFG_PLPRCR \
299 ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
300#else /* up to 50 MHz we use a 1:1 clock */
301#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
302#endif /* CCM_80MHz */
303
304/*-----------------------------------------------------------------------
305 * SCCR - System Clock and reset Control Register 15-27
306 *-----------------------------------------------------------------------
307 * Set clock output, timebase and RTC source and divider,
308 * power management and some other internal clocks
309 */
310#define SCCR_MASK SCCR_EBDF11
311#ifdef CCM_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
312#define CFG_SCCR (/* SCCR_TBS | */ \
313 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
314 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
315 SCCR_DFALCD00)
316#else /* up to 50 MHz we use a 1:1 clock */
317#define CFG_SCCR (SCCR_TBS | \
318 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
319 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
320 SCCR_DFALCD00)
321#endif /* CCM_80MHz */
322
323/*-----------------------------------------------------------------------
324 *
325 * Interrupt Levels
326 *-----------------------------------------------------------------------
327 */
328#define CFG_CPM_INTERRUPT 13 /* SIU_LEVEL6 */
329
330/*-----------------------------------------------------------------------
331 *
332 *-----------------------------------------------------------------------
333 *
334 */
335#define CFG_DER 0
336
337/*
338 * Init Memory Controller:
339 *
340 * BR0/1 and OR0/1 (FLASH)
341 */
342
343#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
344#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
345
346/* used to re-map FLASH both when starting from SRAM or FLASH:
347 * restrict access enough to keep SRAM working (if any)
348 * but not too much to meddle with FLASH accesses
349 */
350#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
351#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
352
353/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
354#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
355 OR_SCY_5_CLK | OR_EHTR)
356
357#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
358#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
359#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
360
361#define CFG_OR1_REMAP CFG_OR0_REMAP
362#define CFG_OR1_PRELIM CFG_OR0_PRELIM
363#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
364
365/*
366 * BR2 and OR2 (SDRAM)
367 *
368 */
369#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
370#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
371#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
372
373/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
374#define CFG_OR_TIMING_SDRAM 0x00000A00
375
376#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
377#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
378
379/*
380 * BR3 and OR3 (CAN Controller)
381 */
382#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
383#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
384#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI)
385#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \
386 BR_PS_8 | BR_MS_UPMB | BR_V )
387
388/*
389 * BR4/OR4: PUMA Config
390 *
391 * Memory controller will be used in 2 modes:
392 *
393 * - "read" mode:
394 * BR4: 0x10100801 OR4: 0xffff8520
395 * - "load" mode (chip select on UPM B):
396 * BR4: 0x101004c1 OR4: 0xffff8600
397 *
398 * Default initialization is in "read" mode
399 */
400#define PUMA_CONF_BASE 0x10100000 /* PUMA Config */
401#define PUMA_CONF_OR_AM 0xFFFF8000 /* 32 kB */
402#define PUMA_CONF_LOAD_TIMING (OR_ACS_DIV2 | OR_SCY_2_CLK)
403#define PUMA_CONF_READ_TIMING (OR_G5LA | OR_BI | OR_SCY_2_CLK)
404
405#define PUMA_CONF_BR_LOAD ((PUMA_CONF_BASE & BR_BA_MSK) | \
406 BR_PS_8 | BR_MS_UPMB | BR_V)
407#define PUMA_CONF_OR_LOAD (PUMA_CONF_OR_AM | PUMA_CONF_LOAD_TIMING)
408
409#define PUMA_CONF_BR_READ ((PUMA_CONF_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
410#define PUMA_CONF_OR_READ (PUMA_CONF_OR_AM | PUMA_CONF_READ_TIMING)
411
412#define CFG_BR4_PRELIM PUMA_CONF_BR_READ
413#define CFG_OR4_PRELIM PUMA_CONF_OR_READ
414
415/*
416 * BR5/OR5: PUMA: SMA Bus 8 Bit
417 * BR5: 0x10200401 OR5: 0xffe0010a
418 */
419#define PUMA_SMA8_BASE 0x10200000 /* PUMA SMA Bus 8 Bit */
420#define PUMA_SMA8_OR_AM 0xFFE00000 /* 2 MB */
421#define PUMA_SMA8_TIMING (OR_BI | OR_SCY_0_CLK | OR_EHTR)
422
423#define CFG_BR5_PRELIM ((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
424#define CFG_OR5_PRELIM (PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
425
426/*
427 * BR6/OR6: PUMA: SMA Bus 16 Bit
428 * BR6: 0x10600801 OR6: 0xffe0010a
429 */
430#define PUMA_SMA16_BASE 0x10600000 /* PUMA SMA Bus 16 Bit */
431#define PUMA_SMA16_OR_AM 0xFFE00000 /* 2 MB */
432#define PUMA_SMA16_TIMING (OR_BI | OR_SCY_0_CLK | OR_EHTR)
433
434#define CFG_BR6_PRELIM ((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
435#define CFG_OR6_PRELIM (PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
436
437/*
438 * BR7/OR7: PUMA: external Flash
439 * BR7: 0x10a00801 OR7: 0xfe00010a
440 */
441#define PUMA_FLASH_BASE 0x10A00000 /* PUMA external Flash */
442#define PUMA_FLASH_OR_AM 0xFE000000 /* 32 MB */
443#define PUMA_FLASH_TIMING (OR_BI | OR_SCY_0_CLK | OR_EHTR)
444
445#define CFG_BR7_PRELIM ((PUMA_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
446#define CFG_OR7_PRELIM (PUMA_FLASH_OR_AM | PUMA_FLASH_TIMING | OR_SETA)
447
448
449/*
450 * Memory Periodic Timer Prescaler
451 */
452
453/* periodic timer for refresh */
454#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
455
456/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
457#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
458#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
459
460/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
461#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
462#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
463
464/*
465 * MAMR settings for SDRAM
466 */
467
468/* 8 column SDRAM */
469#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
470 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
471 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
472/* 9 column SDRAM */
473#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
474 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
475 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
476
477
478/*
479 * Internal Definitions
480 *
481 * Boot Flags
482 */
483#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
484#define BOOTFLAG_WARM 0x02 /* Software reboot */
485
486#endif /* __CONFIG_H */