blob: d4ad02182353e5d90c5e33c51d263022a2cbbfe2 [file] [log] [blame]
Hans de Goede7d65e2c2015-08-05 17:50:03 +02001/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun5i-a10s.dtsi"
45#include "sunxi-common-regulators.dtsi"
46#include <dt-bindings/gpio/gpio.h>
47#include <dt-bindings/pinctrl/sun4i-a10.h>
48
49/ {
50 model = "Auxtek t003 A10s hdmi tv-stick";
51 compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s";
52
53 aliases {
54 serial0 = &uart0;
55 };
56
57 chosen {
58 stdout-path = "serial0:115200n8";
59 };
60
61 leds {
62 compatible = "gpio-leds";
63 pinctrl-names = "default";
64 pinctrl-0 = <&led_pins_t003>;
65
66 red {
67 label = "t003-tv-dongle:red:usr";
68 gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
69 default-state = "on";
70 };
71 };
72};
73
74&ehci0 {
75 status = "okay";
76};
77
78&i2c0 {
79 pinctrl-names = "default";
80 pinctrl-0 = <&i2c0_pins_a>;
81 status = "okay";
82
83 axp152: pmic@30 {
84 compatible = "x-powers,axp152";
85 reg = <0x30>;
86 interrupts = <0>;
87 interrupt-controller;
88 #interrupt-cells = <1>;
89 };
90};
91
92&mmc0 {
93 pinctrl-names = "default";
94 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>;
95 vmmc-supply = <&reg_vcc3v3>;
96 bus-width = <4>;
97 cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
98 cd-inverted;
99 status = "okay";
100};
101
102&ohci0 {
103 status = "okay";
104};
105
106&otg_sram {
107 status = "okay";
108};
109
110&pio {
111 mmc0_cd_pin_t003: mmc0_cd_pin@0 {
112 allwinner,pins = "PG1";
113 allwinner,function = "gpio_in";
114 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
115 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
116 };
117
118 led_pins_t003: led_pins@0 {
119 allwinner,pins = "PB2";
120 allwinner,function = "gpio_out";
121 allwinner,drive = <SUN4I_PINCTRL_20_MA>;
122 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
123 };
124};
125
126&reg_usb0_vbus {
127 gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
128 status = "okay";
129};
130
131&reg_usb1_vbus {
132 gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
133 status = "okay";
134};
135
136&uart0 {
137 pinctrl-names = "default";
138 pinctrl-0 = <&uart0_pins_a>;
139 status = "okay";
140};
141
142&usb0_vbus_pin_a {
143 allwinner,pins = "PG13";
144};
145
146&usb1_vbus_pin_a {
147 allwinner,pins = "PB10";
148};
149
150&usb_otg {
151 dr_mode = "host";
152 status = "okay";
153};
154
155&usbphy {
156 usb0_vbus-supply = <&reg_usb0_vbus>;
157 usb1_vbus-supply = <&reg_usb1_vbus>;
158 status = "okay";
159};