| Stefan Roese | a488483 | 2014-10-22 12:13:19 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2014 Stefan Roese <sr@denx.de> |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | #ifndef _CONFIG_DB_MV7846MP_GP_H |
| 8 | #define _CONFIG_DB_MV7846MP_GP_H |
| 9 | |
| 10 | /* |
| 11 | * High Level Configuration Options (easy to change) |
| 12 | */ |
| 13 | #define CONFIG_ARMADA_XP /* SOC Family Name */ |
| 14 | #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ |
| 15 | #define CONFIG_SYS_GENERIC_BOARD |
| 16 | #define CONFIG_DISPLAY_BOARDINFO_LATE |
| 17 | |
| 18 | #define CONFIG_SYS_TEXT_BASE 0x04000000 |
| 19 | #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ |
| 20 | |
| 21 | /* |
| 22 | * Commands configuration |
| 23 | */ |
| 24 | #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ |
| 25 | #include <config_cmd_default.h> |
| 26 | #define CONFIG_CMD_DHCP |
| 27 | #define CONFIG_CMD_ENV |
| 28 | #define CONFIG_CMD_I2C |
| 29 | #define CONFIG_CMD_PING |
| 30 | #define CONFIG_CMD_SF |
| 31 | #define CONFIG_CMD_SPI |
| 32 | #define CONFIG_CMD_TFTPPUT |
| 33 | #define CONFIG_CMD_TIME |
| 34 | |
| 35 | /* I2C */ |
| 36 | #define CONFIG_SYS_I2C |
| 37 | #define CONFIG_SYS_I2C_MVTWSI |
| 38 | #define CONFIG_I2C_MVTWSI_BASE MVEBU_TWSI_BASE |
| 39 | #define CONFIG_SYS_I2C_SLAVE 0x0 |
| 40 | #define CONFIG_SYS_I2C_SPEED 100000 |
| 41 | |
| 42 | /* SPI NOR flash default params, used by sf commands */ |
| 43 | #define CONFIG_SF_DEFAULT_SPEED 1000000 |
| 44 | #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 |
| 45 | #define CONFIG_SPI_FLASH_STMICRO |
| 46 | |
| 47 | /* Environment in SPI NOR flash */ |
| 48 | #define CONFIG_ENV_IS_IN_SPI_FLASH |
| 49 | #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ |
| 50 | #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ |
| 51 | #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ |
| 52 | |
| 53 | #define CONFIG_PHY_MARVELL /* there is a marvell phy */ |
| 54 | #define CONFIG_PHY_BASE_ADDR 0x0 |
| 55 | #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII |
| 56 | #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ |
| 57 | #define CONFIG_RESET_PHY_R |
| 58 | |
| 59 | #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ |
| 60 | #define CONFIG_SYS_ALT_MEMTEST |
| 61 | |
| 62 | /* |
| 63 | * mv-common.h should be defined after CMD configs since it used them |
| 64 | * to enable certain macros |
| 65 | */ |
| 66 | #include "mv-common.h" |
| 67 | |
| 68 | #endif /* _CONFIG_DB_MV7846MP_GP_H */ |