blob: c57c8628bf904fec9cd0b3fd767c688656d13fe6 [file] [log] [blame]
Mike Frysingerd7fdc142008-10-12 23:16:52 -04001/*
2 * U-boot - Configuration file for CSP Minotaur board
3 *
4 * Thu Oct 25 15:30:44 CEST 2007 <hackfin@section5.ch>
5 * Minotaur config, brushed up for official uClinux dist.
6 * Parallel flash support disabled, SPI flash boot command
7 * added ('run flashboot').
8 *
9 * Flash image map:
10 *
11 * 0x00000000 u-boot bootstrap
12 * 0x00010000 environment
13 * 0x00020000 u-boot code
14 * 0x00030000 uImage.initramfs
15 *
16 */
17
18#ifndef __CONFIG_BF537_MINOTAUR_H__
19#define __CONFIG_BF537_MINOTAUR_H__
20
Mike Frysingerf348ab82009-04-24 17:22:40 -040021#include <asm/config-pre.h>
Mike Frysingerd7fdc142008-10-12 23:16:52 -040022
23
24/*
25 * Processor Settings
26 */
Mike Frysingerfbcf8e82010-12-23 14:58:37 -050027#define CONFIG_BFIN_CPU bf537-0.2
Mike Frysingerd7fdc142008-10-12 23:16:52 -040028#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER
29
30
31/*
32 * Clock Settings
33 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
34 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
35 */
36/* CONFIG_CLKIN_HZ is any value in Hz */
37#define CONFIG_CLKIN_HZ 25000000
38/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
39/* 1 = CLKIN / 2 */
40#define CONFIG_CLKIN_HALF 0
41/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
42/* 1 = bypass PLL */
43#define CONFIG_PLL_BYPASS 0
44/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
45/* Values can range from 0-63 (where 0 means 64) */
46#define CONFIG_VCO_MULT 20
47/* CCLK_DIV controls the core clock divider */
48/* Values can be 1, 2, 4, or 8 ONLY */
49#define CONFIG_CCLK_DIV 1
50/* SCLK_DIV controls the system clock divider */
51/* Values can range from 1-15 */
52#define CONFIG_SCLK_DIV 5
53
54
55/*
56 * Memory Settings
57 */
58#define CONFIG_MEM_SIZE 32
59#define CONFIG_MEM_ADD_WDTH 9
60
61#define CONFIG_EBIU_SDRRC_VAL 0x306
62#define CONFIG_EBIU_SDGCTL_VAL 0x91114d
63
64#define CONFIG_EBIU_AMGCTL_VAL 0xFF
65#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
66#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
67
68#define CONFIG_SYS_MONITOR_LEN (256 << 10)
69#define CONFIG_SYS_MALLOC_LEN (128 << 10)
70
71
72/*
73 * Network Settings
74 */
75#ifndef __ADSPBF534__
76#define CONFIG_BFIN_MAC
77#define CONFIG_NETCONSOLE 1
Mike Frysingerd7fdc142008-10-12 23:16:52 -040078#endif
79#ifdef CONFIG_BFIN_MAC
80#define CONFIG_IPADDR 192.168.0.15
81#define CONFIG_NETMASK 255.255.255.0
82#define CONFIG_GATEWAYIP 192.168.0.1
83#define CONFIG_SERVERIP 192.168.0.2
84#define CONFIG_HOSTNAME bf537-minotaur
85#endif
86
87#define CONFIG_SYS_AUTOLOAD "no"
Joe Hershberger8b3637c2011-10-13 13:03:47 +000088#define CONFIG_ROOTPATH "/romfs"
Mike Frysingerd7fdc142008-10-12 23:16:52 -040089
90
91/*
92 * Flash Settings
93 */
94/* We don't have a parallel flash chip there */
95#define CONFIG_SYS_NO_FLASH
96
97
98/*
99 * SPI Settings
100 */
101#define CONFIG_BFIN_SPI
102#define CONFIG_ENV_SPI_MAX_HZ 30000000
Mike Frysingerafac8b02009-06-14 22:29:35 -0400103#define CONFIG_SF_DEFAULT_SPEED 30000000
Mike Frysingerd7fdc142008-10-12 23:16:52 -0400104#define CONFIG_SPI_FLASH_STMICRO
105
106
107/*
108 * Env Storage Settings
109 */
110#define CONFIG_ENV_IS_IN_SPI_FLASH
111#define CONFIG_ENV_OFFSET 0x10000
112#define CONFIG_ENV_SIZE 0x10000
113#define CONFIG_ENV_SECT_SIZE 0x10000
Mike Frysinger76d82182009-07-21 22:17:36 -0400114#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
Mike Frysingerd7fdc142008-10-12 23:16:52 -0400115
116
117/*
118 * I2C settings
119 */
Scott Jiangc4697032014-11-13 15:30:55 +0800120#define CONFIG_SYS_I2C
Scott Jiangfea9b692014-11-13 15:30:53 +0800121#define CONFIG_SYS_I2C_ADI
Mike Frysingerd7fdc142008-10-12 23:16:52 -0400122#define CONFIG_SYS_I2C_SPEED 50000
123#define CONFIG_SYS_I2C_SLAVE 0
124
125
126/*
127 * Misc Settings
128 */
129#define CONFIG_SYS_LONGHELP 1
130#define CONFIG_CMDLINE_EDITING 1
131#define CONFIG_ENV_OVERWRITE 1
Mike Frysingerd7fdc142008-10-12 23:16:52 -0400132
133#define CONFIG_BAUDRATE 57600
134#define CONFIG_UART_CONSOLE 0
Sonic Zhang7a58eb92013-11-18 14:50:19 +0800135#define CONFIG_BFIN_SERIAL
Mike Frysingerd7fdc142008-10-12 23:16:52 -0400136
137#define CONFIG_PANIC_HANG 1
138#define CONFIG_RTC_BFIN 1
139#define CONFIG_BOOT_RETRY_TIME -1
140#define CONFIG_LOADS_ECHO 1
141
142#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
143# define CONFIG_BOOTDELAY -1
144#else
145# define CONFIG_BOOTDELAY 5
146#endif
147
Mike Frysingerd7fdc142008-10-12 23:16:52 -0400148#ifdef CONFIG_BFIN_MAC
149# define CONFIG_CMD_DHCP
150# define CONFIG_CMD_PING
Mike Frysingerd7fdc142008-10-12 23:16:52 -0400151#endif
152
153#define CONFIG_CMD_BOOTLDR
154#define CONFIG_CMD_CACHE
155#define CONFIG_CMD_DATE
Mike Frysingerd7fdc142008-10-12 23:16:52 -0400156#define CONFIG_CMD_I2C
Mike Frysingerd7fdc142008-10-12 23:16:52 -0400157#define CONFIG_CMD_SF
158
159#define CONFIG_BOOTCOMMAND "run ramboot"
160#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw"
Mike Frysingerd7fdc142008-10-12 23:16:52 -0400161
162#define BOOT_ENV_SETTINGS \
163 "update=tftpboot $(loadaddr) u-boot.ldr;" \
Marek Vasut5368c552012-09-23 17:41:24 +0200164 "sf probe " __stringify(BFIN_BOOT_SPI_SSEL) ";" \
Mike Frysingerd7fdc142008-10-12 23:16:52 -0400165 "sf erase 0 0x30000;" \
166 "sf write $(loadaddr) 0 $(filesize)" \
167 "flashboot=sf read 0x1000000 0x30000 0x320000;" \
168 "bootm 0x1000000\0"
169#ifdef CONFIG_BFIN_MAC
170# define NETWORK_ENV_SETTINGS \
171 "nfsargs=setenv bootargs root=/dev/nfs rw " \
172 "nfsroot=$(serverip):$(rootpath)\0" \
173 "addip=setenv bootargs $(bootargs) " \
174 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
175 ":$(hostname):eth0:off\0" \
176 "ramboot=tftpboot $(loadaddr) linux;" \
177 "run ramargs;run addip;bootelf\0" \
178 "nfsboot=tftpboot $(loadaddr) linux;" \
179 "run nfsargs;run addip;bootelf\0"
180#else
181# define NETWORK_ENV_SETTINGS
182#endif
183#define CONFIG_EXTRA_ENV_SETTINGS \
184 NETWORK_ENV_SETTINGS \
185 "ramargs=setenv bootargs " CONFIG_BOOTARGS "\0" \
186 BOOT_ENV_SETTINGS
187
Mike Frysingerd7fdc142008-10-12 23:16:52 -0400188#endif