| Masahiro Yamada | 0b11dbf | 2015-07-26 02:46:26 +0900 | [diff] [blame] | 1 | menu "Sound support" |
| 2 | |
| Simon Glass | ef35d98 | 2015-03-06 13:19:08 -0700 | [diff] [blame] | 3 | config SOUND |
| 4 | bool "Enable sound support" |
| 5 | help |
| 6 | Support making sounds through an audio codec. This is normally a |
| 7 | beep at a chosen frequency for a selected length of time. However |
| 8 | the drivers support playing arbitrary sound samples using a |
| 9 | PCM interface. |
| 10 | |
| 11 | Note: At present the sound setup is somewhat tangled up in that the |
| 12 | audio codecs are called from the sound-i2s code. This could be |
| 13 | converted to driver model. |
| Simon Glass | 00cf7bf | 2015-03-06 13:19:10 -0700 | [diff] [blame] | 14 | |
| 15 | config I2S |
| 16 | bool "Enable I2S support" |
| 17 | depends on SOUND |
| 18 | help |
| 19 | I2S is a serial bus often used to transmit audio data from the |
| 20 | SoC to the audio codec. This option enables sound support using |
| 21 | I2S. It calls either of the two supported codecs (no use is made |
| 22 | of driver model at present). |
| Simon Glass | 6bd7be2 | 2015-03-06 13:19:11 -0700 | [diff] [blame] | 23 | |
| Simon Glass | 2665f09 | 2018-12-27 20:15:21 -0700 | [diff] [blame] | 24 | config I2S_ROCKCHIP |
| 25 | bool "Enable I2S support for Rockchip SoCs" |
| 26 | depends on I2S |
| 27 | help |
| 28 | Rockchip SoCs support an I2S interface for sending audio data to an |
| 29 | audio codec. This option enables support for this, using one of the |
| 30 | available audio codec drivers. This driver does not make use of |
| 31 | DMA, but writes each word directly to the hardware. |
| 32 | |
| Simon Glass | 6bd7be2 | 2015-03-06 13:19:11 -0700 | [diff] [blame] | 33 | config I2S_SAMSUNG |
| 34 | bool "Enable I2C support for Samsung SoCs" |
| Simon Glass | afcd645 | 2018-12-27 13:24:39 -0700 | [diff] [blame] | 35 | depends on I2S |
| Simon Glass | 6bd7be2 | 2015-03-06 13:19:11 -0700 | [diff] [blame] | 36 | help |
| 37 | Samsung Exynos SoCs support an I2S interface for sending audio |
| 38 | data to an audio codec. This option enables support for this, |
| 39 | using one of the available audio codec drivers. Enabling this |
| 40 | option provides an implementation for sound_init() and |
| 41 | sound_play(). |
| Simon Glass | 7a170a5 | 2015-03-06 13:19:12 -0700 | [diff] [blame] | 42 | |
| Simon Glass | 6a27e54 | 2019-02-16 20:24:59 -0700 | [diff] [blame] | 43 | config SOUND_I8254 |
| 44 | bool "Intel i8254 timer / beeper" |
| 45 | depends on SOUND |
| 46 | help |
| 47 | This enables support for a beeper that uses the i8254 timer chip. |
| 48 | This can emit beeps at a fixed frequency. It is possible to control |
| 49 | the length of the beeps, by turning a beep on, waiting for a period |
| 50 | of time, then turning it off. |
| 51 | |
| 52 | This is quite an old feature, called PIT (Programmable Interval |
| 53 | Timer), but is nonetheless still available on modern x86 machines. |
| 54 | |
| Simon Glass | 2ca4713 | 2019-02-16 20:24:55 -0700 | [diff] [blame] | 55 | config SOUND_INTEL_HDA |
| 56 | bool "Intel HDA audio codec" |
| 57 | depends on SOUND |
| 58 | help |
| 59 | Most Intel chips have an HDA (High-definition audio) codec which can |
| 60 | be used by U-Boot to play simple beeps. This is also sometimes called |
| 61 | Azalia which was the development code-name. It requires setup |
| 62 | information in the device tree (see intel-hda.txt). |
| 63 | |
| Simon Glass | 6744c0d | 2019-02-16 20:24:57 -0700 | [diff] [blame] | 64 | config SOUND_IVYBRIDGE |
| 65 | bool "Intel Ivybridge sound support" |
| 66 | depends on SOUND |
| 67 | select SOUND_INTEL_HDA |
| 68 | help |
| 69 | Enable sound output on supported Intel Ivybridge-based boards. This |
| 70 | driver uses Intel's High-definition Audio (HDA) architecture, |
| 71 | sometimes called Azalia. The audio codec is detected using a |
| 72 | semi-automatic mechanism. |
| 73 | |
| Simon Glass | 9a7210f | 2019-01-11 18:37:09 -0700 | [diff] [blame] | 74 | config SOUND_MAX98088 |
| 75 | bool "Support Maxim max98088 audio codec" |
| Simon Glass | afcd645 | 2018-12-27 13:24:39 -0700 | [diff] [blame] | 76 | depends on I2S |
| Simon Glass | 9a7210f | 2019-01-11 18:37:09 -0700 | [diff] [blame] | 77 | help |
| 78 | Enable the max98088 audio codec. This is connected via I2S for |
| 79 | audio data and I2C for codec control. At present it only works |
| 80 | with the Samsung I2S driver. |
| 81 | |
| Simon Glass | 8cad63c | 2018-12-10 10:37:43 -0700 | [diff] [blame] | 82 | config SOUND_MAX98090 |
| 83 | bool "Support Maxim max98090 audio codec" |
| Simon Glass | afcd645 | 2018-12-27 13:24:39 -0700 | [diff] [blame] | 84 | depends on I2S |
| Simon Glass | 8cad63c | 2018-12-10 10:37:43 -0700 | [diff] [blame] | 85 | help |
| 86 | Enable the max98090 audio codec. This is connected via I2S for |
| 87 | audio data and I2C for codec control. At present it only works |
| 88 | with the Samsung I2S driver. |
| 89 | |
| Simon Glass | 7a170a5 | 2015-03-06 13:19:12 -0700 | [diff] [blame] | 90 | config SOUND_MAX98095 |
| 91 | bool "Support Maxim max98095 audio codec" |
| Simon Glass | afcd645 | 2018-12-27 13:24:39 -0700 | [diff] [blame] | 92 | depends on I2S |
| Simon Glass | 7a170a5 | 2015-03-06 13:19:12 -0700 | [diff] [blame] | 93 | help |
| 94 | Enable the max98095 audio codec. This is connected via I2S for |
| 95 | audio data and I2C for codec control. At present it only works |
| 96 | with the Samsung I2S driver. |
| Simon Glass | dd573f9 | 2015-03-06 13:19:13 -0700 | [diff] [blame] | 97 | |
| Simon Glass | cf88592 | 2019-02-16 20:25:05 -0700 | [diff] [blame] | 98 | config SOUND_RT5677 |
| 99 | bool "Support Realtek RT5677 audio codec" |
| 100 | depends on SOUND |
| 101 | help |
| 102 | Enable the Realtek RT5677 audio codec. This is an I2S device used on |
| 103 | some Chromebooks from around 2015 ('auron'). It is configured using |
| 104 | an I2C interface and supports multiple sound inputs and outputs, |
| 105 | including digital microphones. |
| 106 | |
| Simon Glass | 3907305 | 2015-03-06 13:19:14 -0700 | [diff] [blame] | 107 | config SOUND_SANDBOX |
| 108 | bool "Support sandbox emulated audio codec" |
| 109 | depends on SANDBOX && SOUND |
| 110 | help |
| 111 | U-Boot sandbox can emulate a sound device using SDL, playing the |
| 112 | sound on the host machine. This option implements the sound_init() |
| 113 | and sound_play() functions for sandbox. Note that you must install |
| 114 | the SDL libraries for this to work. |
| 115 | |
| Simon Glass | dd573f9 | 2015-03-06 13:19:13 -0700 | [diff] [blame] | 116 | config SOUND_WM8994 |
| 117 | bool "Support Wolfson Micro wm8994 audio codec" |
| 118 | depends on I2S_SAMSUNG |
| 119 | help |
| 120 | Enable the wm8994 audio codec. This is connected via I2S for |
| 121 | audio data and I2C for codec control. At present it only works |
| 122 | with the Samsung I2S driver. |
| Masahiro Yamada | 0b11dbf | 2015-07-26 02:46:26 +0900 | [diff] [blame] | 123 | |
| 124 | endmenu |