Mingkai Hu | 273feaf | 2011-04-26 16:31:16 +0800 | [diff] [blame] | 1 | /* |
| 2 | * eSPI controller driver. |
| 3 | * |
| 4 | * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| 5 | * Author: Mingkai Hu (Mingkai.hu@freescale.com) |
| 6 | * |
Wolfgang Denk | 1a45966 | 2013-07-08 09:37:19 +0200 | [diff] [blame] | 7 | * SPDX-License-Identifier: GPL-2.0+ |
Mingkai Hu | 273feaf | 2011-04-26 16:31:16 +0800 | [diff] [blame] | 8 | */ |
| 9 | |
| 10 | #include <common.h> |
| 11 | |
| 12 | #include <malloc.h> |
| 13 | #include <spi.h> |
| 14 | #include <asm/immap_85xx.h> |
| 15 | |
| 16 | struct fsl_spi_slave { |
| 17 | struct spi_slave slave; |
| 18 | unsigned int div16; |
| 19 | unsigned int pm; |
| 20 | unsigned int mode; |
| 21 | size_t cmd_len; |
| 22 | u8 cmd_buf[16]; |
| 23 | size_t data_len; |
| 24 | unsigned int max_transfer_length; |
| 25 | }; |
| 26 | |
| 27 | #define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave) |
| 28 | |
| 29 | #define ESPI_MAX_CS_NUM 4 |
| 30 | |
| 31 | #define ESPI_EV_RNE (1 << 9) |
| 32 | #define ESPI_EV_TNF (1 << 8) |
| 33 | |
| 34 | #define ESPI_MODE_EN (1 << 31) /* Enable interface */ |
| 35 | #define ESPI_MODE_TXTHR(x) ((x) << 8) /* Tx FIFO threshold */ |
| 36 | #define ESPI_MODE_RXTHR(x) ((x) << 0) /* Rx FIFO threshold */ |
| 37 | |
| 38 | #define ESPI_COM_CS(x) ((x) << 30) |
| 39 | #define ESPI_COM_TRANLEN(x) ((x) << 0) |
| 40 | |
| 41 | #define ESPI_CSMODE_CI_INACTIVEHIGH (1 << 31) |
| 42 | #define ESPI_CSMODE_CP_BEGIN_EDGCLK (1 << 30) |
| 43 | #define ESPI_CSMODE_REV_MSB_FIRST (1 << 29) |
| 44 | #define ESPI_CSMODE_DIV16 (1 << 28) |
| 45 | #define ESPI_CSMODE_PM(x) ((x) << 24) |
| 46 | #define ESPI_CSMODE_POL_ASSERTED_LOW (1 << 20) |
| 47 | #define ESPI_CSMODE_LEN(x) ((x) << 16) |
| 48 | #define ESPI_CSMODE_CSBEF(x) ((x) << 12) |
| 49 | #define ESPI_CSMODE_CSAFT(x) ((x) << 8) |
| 50 | #define ESPI_CSMODE_CSCG(x) ((x) << 3) |
| 51 | |
| 52 | #define ESPI_CSMODE_INIT_VAL (ESPI_CSMODE_POL_ASSERTED_LOW | \ |
| 53 | ESPI_CSMODE_CSBEF(0) | ESPI_CSMODE_CSAFT(0) | \ |
| 54 | ESPI_CSMODE_CSCG(1)) |
| 55 | |
| 56 | #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 |
| 57 | |
| 58 | struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, |
| 59 | unsigned int max_hz, unsigned int mode) |
| 60 | { |
| 61 | struct fsl_spi_slave *fsl; |
| 62 | sys_info_t sysinfo; |
| 63 | unsigned long spibrg = 0; |
| 64 | unsigned char pm = 0; |
| 65 | |
| 66 | if (!spi_cs_is_valid(bus, cs)) |
| 67 | return NULL; |
| 68 | |
Simon Glass | d3504fe | 2013-03-18 19:23:40 +0000 | [diff] [blame] | 69 | fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); |
Mingkai Hu | 273feaf | 2011-04-26 16:31:16 +0800 | [diff] [blame] | 70 | if (!fsl) |
| 71 | return NULL; |
| 72 | |
Mingkai Hu | 273feaf | 2011-04-26 16:31:16 +0800 | [diff] [blame] | 73 | fsl->mode = mode; |
| 74 | fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; |
| 75 | |
| 76 | /* Set eSPI BRG clock source */ |
| 77 | get_sys_info(&sysinfo); |
Prabhakar Kushwaha | 997399f | 2013-08-16 14:52:26 +0530 | [diff] [blame] | 78 | spibrg = sysinfo.freq_systembus / 2; |
Mingkai Hu | 273feaf | 2011-04-26 16:31:16 +0800 | [diff] [blame] | 79 | fsl->div16 = 0; |
| 80 | if ((spibrg / max_hz) > 32) { |
| 81 | fsl->div16 = ESPI_CSMODE_DIV16; |
| 82 | pm = spibrg / (max_hz * 16 * 2); |
| 83 | if (pm > 16) { |
| 84 | pm = 16; |
Marek Vasut | 5cc08a1 | 2011-10-21 14:17:20 +0000 | [diff] [blame] | 85 | debug("Requested speed is too low: %d Hz, %ld Hz " |
| 86 | "is used.\n", max_hz, spibrg / (32 * 16)); |
Mingkai Hu | 273feaf | 2011-04-26 16:31:16 +0800 | [diff] [blame] | 87 | } |
| 88 | } else |
| 89 | pm = spibrg / (max_hz * 2); |
| 90 | if (pm) |
| 91 | pm--; |
| 92 | fsl->pm = pm; |
| 93 | |
| 94 | return &fsl->slave; |
| 95 | } |
| 96 | |
| 97 | void spi_free_slave(struct spi_slave *slave) |
| 98 | { |
| 99 | struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| 100 | free(fsl); |
| 101 | } |
| 102 | |
| 103 | void spi_init(void) |
| 104 | { |
| 105 | |
| 106 | } |
| 107 | |
| 108 | int spi_claim_bus(struct spi_slave *slave) |
| 109 | { |
| 110 | struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| 111 | ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| 112 | unsigned char pm = fsl->pm; |
| 113 | unsigned int cs = slave->cs; |
| 114 | unsigned int mode = fsl->mode; |
| 115 | unsigned int div16 = fsl->div16; |
| 116 | int i; |
| 117 | |
| 118 | debug("%s: bus:%i cs:%i\n", __func__, slave->bus, cs); |
| 119 | |
| 120 | /* Enable eSPI interface */ |
| 121 | out_be32(&espi->mode, ESPI_MODE_RXTHR(3) |
| 122 | | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN); |
| 123 | |
| 124 | out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */ |
| 125 | out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */ |
| 126 | |
| 127 | /* Init CS mode interface */ |
| 128 | for (i = 0; i < ESPI_MAX_CS_NUM; i++) |
| 129 | out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL); |
| 130 | |
| 131 | out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) & |
| 132 | ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16 |
| 133 | | ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK |
| 134 | | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF))); |
| 135 | |
| 136 | /* Set eSPI BRG clock source */ |
| 137 | out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| 138 | | ESPI_CSMODE_PM(pm) | div16); |
| 139 | |
| 140 | /* Set eSPI mode */ |
| 141 | if (mode & SPI_CPHA) |
| 142 | out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| 143 | | ESPI_CSMODE_CP_BEGIN_EDGCLK); |
| 144 | if (mode & SPI_CPOL) |
| 145 | out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| 146 | | ESPI_CSMODE_CI_INACTIVEHIGH); |
| 147 | |
| 148 | /* Character bit order: msb first */ |
| 149 | out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| 150 | | ESPI_CSMODE_REV_MSB_FIRST); |
| 151 | |
| 152 | /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */ |
| 153 | out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) |
| 154 | | ESPI_CSMODE_LEN(7)); |
| 155 | |
| 156 | return 0; |
| 157 | } |
| 158 | |
| 159 | void spi_release_bus(struct spi_slave *slave) |
| 160 | { |
| 161 | |
| 162 | } |
| 163 | |
| 164 | int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, |
| 165 | void *data_in, unsigned long flags) |
| 166 | { |
| 167 | struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| 168 | ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| 169 | unsigned int tmpdout, tmpdin, event; |
| 170 | const void *dout = NULL; |
| 171 | void *din = NULL; |
| 172 | int len = 0; |
| 173 | int num_blks, num_chunks, max_tran_len, tran_len; |
| 174 | int num_bytes; |
| 175 | unsigned char *ch; |
| 176 | unsigned char *buffer = NULL; |
| 177 | size_t buf_len; |
| 178 | u8 *cmd_buf = fsl->cmd_buf; |
| 179 | size_t cmd_len = fsl->cmd_len; |
| 180 | size_t data_len = bitlen / 8; |
| 181 | size_t rx_offset = 0; |
| 182 | |
| 183 | max_tran_len = fsl->max_transfer_length; |
| 184 | switch (flags) { |
| 185 | case SPI_XFER_BEGIN: |
| 186 | cmd_len = fsl->cmd_len = data_len; |
| 187 | memcpy(cmd_buf, data_out, cmd_len); |
| 188 | return 0; |
| 189 | case 0: |
| 190 | case SPI_XFER_END: |
| 191 | if (bitlen == 0) { |
| 192 | spi_cs_deactivate(slave); |
| 193 | return 0; |
| 194 | } |
| 195 | buf_len = 2 * cmd_len + min(data_len, max_tran_len); |
| 196 | len = cmd_len + data_len; |
| 197 | rx_offset = cmd_len; |
| 198 | buffer = (unsigned char *)malloc(buf_len); |
| 199 | if (!buffer) { |
| 200 | debug("SF: Failed to malloc memory.\n"); |
| 201 | return 1; |
| 202 | } |
| 203 | memcpy(buffer, cmd_buf, cmd_len); |
Shaohui Xie | 9905757 | 2012-10-11 20:31:46 +0000 | [diff] [blame] | 204 | if (data_in == NULL) |
| 205 | memcpy(buffer + cmd_len, data_out, data_len); |
Mingkai Hu | 273feaf | 2011-04-26 16:31:16 +0800 | [diff] [blame] | 206 | break; |
| 207 | case SPI_XFER_BEGIN | SPI_XFER_END: |
| 208 | len = data_len; |
| 209 | buffer = (unsigned char *)malloc(len * 2); |
| 210 | if (!buffer) { |
| 211 | debug("SF: Failed to malloc memory.\n"); |
| 212 | return 1; |
| 213 | } |
| 214 | memcpy(buffer, data_out, len); |
| 215 | rx_offset = len; |
| 216 | cmd_len = 0; |
| 217 | break; |
| 218 | } |
| 219 | |
Marek Vasut | 5cc08a1 | 2011-10-21 14:17:20 +0000 | [diff] [blame] | 220 | debug("spi_xfer: slave %u:%u dout %08X(%p) din %08X(%p) len %u\n", |
Mingkai Hu | 273feaf | 2011-04-26 16:31:16 +0800 | [diff] [blame] | 221 | slave->bus, slave->cs, *(uint *) dout, |
| 222 | dout, *(uint *) din, din, len); |
| 223 | |
Axel Lin | a444aa7 | 2013-07-12 17:41:08 +0800 | [diff] [blame] | 224 | num_chunks = DIV_ROUND_UP(data_len, max_tran_len); |
Mingkai Hu | 273feaf | 2011-04-26 16:31:16 +0800 | [diff] [blame] | 225 | while (num_chunks--) { |
| 226 | if (data_in) |
| 227 | din = buffer + rx_offset; |
| 228 | dout = buffer; |
| 229 | tran_len = min(data_len , max_tran_len); |
Axel Lin | a444aa7 | 2013-07-12 17:41:08 +0800 | [diff] [blame] | 230 | num_blks = DIV_ROUND_UP(tran_len + cmd_len, 4); |
Mingkai Hu | 273feaf | 2011-04-26 16:31:16 +0800 | [diff] [blame] | 231 | num_bytes = (tran_len + cmd_len) % 4; |
| 232 | fsl->data_len = tran_len + cmd_len; |
| 233 | spi_cs_activate(slave); |
| 234 | |
| 235 | /* Clear all eSPI events */ |
| 236 | out_be32(&espi->event , 0xffffffff); |
| 237 | /* handle data in 32-bit chunks */ |
| 238 | while (num_blks--) { |
| 239 | |
| 240 | event = in_be32(&espi->event); |
| 241 | if (event & ESPI_EV_TNF) { |
| 242 | tmpdout = *(u32 *)dout; |
| 243 | |
| 244 | /* Set up the next iteration */ |
| 245 | if (len > 4) { |
| 246 | len -= 4; |
| 247 | dout += 4; |
| 248 | } |
| 249 | |
| 250 | out_be32(&espi->tx, tmpdout); |
| 251 | out_be32(&espi->event, ESPI_EV_TNF); |
| 252 | debug("***spi_xfer:...%08x written\n", tmpdout); |
| 253 | } |
| 254 | |
| 255 | /* Wait for eSPI transmit to get out */ |
| 256 | udelay(80); |
| 257 | |
| 258 | event = in_be32(&espi->event); |
| 259 | if (event & ESPI_EV_RNE) { |
| 260 | tmpdin = in_be32(&espi->rx); |
| 261 | if (num_blks == 0 && num_bytes != 0) { |
| 262 | ch = (unsigned char *)&tmpdin; |
| 263 | while (num_bytes--) |
| 264 | *(unsigned char *)din++ = *ch++; |
| 265 | } else { |
| 266 | *(u32 *) din = tmpdin; |
| 267 | din += 4; |
| 268 | } |
| 269 | |
| 270 | out_be32(&espi->event, in_be32(&espi->event) |
| 271 | | ESPI_EV_RNE); |
| 272 | debug("***spi_xfer:...%08x readed\n", tmpdin); |
| 273 | } |
| 274 | } |
| 275 | if (data_in) { |
| 276 | memcpy(data_in, buffer + 2 * cmd_len, tran_len); |
| 277 | if (*buffer == 0x0b) { |
| 278 | data_in += tran_len; |
| 279 | data_len -= tran_len; |
| 280 | *(int *)buffer += tran_len; |
| 281 | } |
| 282 | } |
| 283 | spi_cs_deactivate(slave); |
| 284 | } |
| 285 | |
| 286 | free(buffer); |
| 287 | return 0; |
| 288 | } |
| 289 | |
| 290 | int spi_cs_is_valid(unsigned int bus, unsigned int cs) |
| 291 | { |
| 292 | return bus == 0 && cs < ESPI_MAX_CS_NUM; |
| 293 | } |
| 294 | |
| 295 | void spi_cs_activate(struct spi_slave *slave) |
| 296 | { |
| 297 | struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); |
| 298 | ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| 299 | unsigned int com = 0; |
| 300 | size_t data_len = fsl->data_len; |
| 301 | |
| 302 | com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF)); |
| 303 | com |= ESPI_COM_CS(slave->cs); |
| 304 | com |= ESPI_COM_TRANLEN(data_len - 1); |
| 305 | out_be32(&espi->com, com); |
| 306 | } |
| 307 | |
| 308 | void spi_cs_deactivate(struct spi_slave *slave) |
| 309 | { |
| 310 | ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); |
| 311 | |
| 312 | /* clear the RXCNT and TXCNT */ |
| 313 | out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN)); |
| 314 | out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN); |
| 315 | } |