blob: 80ca40250c27f4b7fcc0cb554f88c0901553270e [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
2 * (C) Copyright 2002
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#include <config.h>
25#include <common.h>
26#include <command.h>
27#include <asm/io.h>
28#include <linux/mtd/doc2000.h>
29#include <watchdog.h>
30#include <pci.h>
31
32#include "hardware.h"
33#include "pcippc2.h"
34#include "sconsole.h"
35#include "fpga_serial.h"
36
37#if defined(CONFIG_WATCHDOG)
38
39static int pcippc2_wdt_init_done = 0;
40
41void pcippc2_wdt_init (void);
42
43#endif
44
45 /* Check board identity
46 */
47int checkboard (void)
48{
49#ifdef CONFIG_PCIPPC2
50 puts ("Board: Gespac PCIPPC-2\n");
51#else
52 puts ("Board: Gespac PCIPPC-6\n");
53#endif
54 return 0;
55}
56
57 /* RAM size is stored in CPC0_RGBAN1
58 */
59u32 pcippc2_sdram_size (void)
60{
61 return in32 (REG (CPC0, RGBAN1));
62}
63
64long initdram (int board_type)
65{
66 return cpc710_ram_init ();
67}
68
69void do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
70{
71 out32 (REG (CPC0, SPOR), 0);
72 iobarrier_rw ();
73 while (1);
74}
75
76int board_pre_init (void)
77{
78 out32 (REG (CPC0, RSTR), 0xC0000000);
79 iobarrier_rw ();
80
81 out32 (REG (CPC0, RSTR), 0xF0000000);
82 iobarrier_rw ();
83
84 out32 (REG (CPC0, UCTL), 0x00F80000);
85
86 out32 (REG (CPC0, SIOC0), 0x30000000);
87
88 out32 (REG (CPC0, ABCNTL), 0x00000000);
89
90 out32 (REG (CPC0, SESR), 0x00000000);
91 out32 (REG (CPC0, SEAR), 0x00000000);
92
93 /* Detect IBM Avignon CPC710 Revision */
94 if ((in32 (REG (CPC0, UCTL)) & 0x000000F0) == CPC710_TYPE_100P)
95 out32 (REG (CPC0, PGCHP), 0xA0000040);
96 else
97 out32 (REG (CPC0, PGCHP), 0x80800040);
98
99
100 out32 (REG (CPC0, ATAS), 0x709C2508);
101
102 iobarrier_rw ();
103
104 return 0;
105}
106
107void after_reloc (ulong dest_addr)
108{
109 DECLARE_GLOBAL_DATA_PTR;
110
111 /* Jump to the main U-Boot board init code
112 */
113 board_init_r (gd, dest_addr);
114}
115
116int misc_init_r (void)
117{
118 pcippc2_fpga_init ();
119
wdenke95b61c2002-11-04 16:02:40 +0000120 pcippc2_cpci3264_init ();
121
wdenkc6097192002-11-03 00:24:07 +0000122#if defined(CONFIG_WATCHDOG)
123 pcippc2_wdt_init ();
124#endif
125
126 fpga_serial_init (sconsole_get_baudrate ());
127
128 sconsole_putc = fpga_serial_putc;
129 sconsole_puts = fpga_serial_puts;
130 sconsole_getc = fpga_serial_getc;
131 sconsole_tstc = fpga_serial_tstc;
132 sconsole_setbrg = fpga_serial_setbrg;
133
134 sconsole_flush ();
135 return (0);
136}
137
138void pci_init (void)
139{
140 cpc710_pci_init ();
141
142 /* FPGA requires no retry timeouts to be enabled
143 */
144 cpc710_pci_enable_timeout ();
145}
146
147void doc_init (void)
148{
149 doc_probe (pcippc2_fpga1_phys + HW_FPGA1_DOC);
150}
151
wdenke95b61c2002-11-04 16:02:40 +0000152void pcippc2_cpci3264_init (void)
153{
154 pci_dev_t bdf = pci_find_device(FPGA_VENDOR_ID, FPGA_DEVICE_ID, 0);
155
156 if (bdf == -1)
157 {
158 puts("Unable to find FPGA !\n");
159 hang();
160 }
161
162 if((in32(pcippc2_fpga0_phys + HW_FPGA0_BOARD) & 0x01000000) == 0x01000000)
163 /* 32-bits Compact PCI bus - LSB bit */
164 {
165 iobarrier_rw();
166 out32(BRIDGE(CPCI, PCIDG), 0x40000000); /* 32-bits bridge, Pipeline */
167 iobarrier_rw();
168 }
169}
170
wdenkc6097192002-11-03 00:24:07 +0000171#if defined(CONFIG_WATCHDOG)
172
173void pcippc2_wdt_init (void)
174{
175 out16r (FPGA (WDT, PROG), 0xffff);
176 out8 (FPGA (WDT, CTRL), 0x1);
177
178 pcippc2_wdt_init_done = 1;
179}
180
181void pcippc2_wdt_done (void)
182{
183 out8 (FPGA (WDT, CTRL), 0x0);
184
185 pcippc2_wdt_init_done = 0;
186}
187
188void pcippc2_wdt_reset (void)
189{
190 if (pcippc2_wdt_init_done == 1)
191 out8 (FPGA (WDT, REFRESH), 0x56);
192}
193
194void watchdog_reset (void)
195{
196 int re_enable = disable_interrupts ();
197
198 pcippc2_wdt_reset ();
199 if (re_enable)
200 enable_interrupts ();
201}
202
203#if (CONFIG_COMMANDS & CFG_CMD_BSP)
204int do_wd (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
205{
206 switch (argc) {
207 case 1:
208 printf ("Watchdog timer status is %s\n",
209 pcippc2_wdt_init_done == 1 ? "on" : "off");
210
211 return 0;
212 case 2:
213 if (!strcmp(argv[1],"on")) {
214 pcippc2_wdt_init();
215 printf("Watchdog timer now is on\n");
216
217 return 0;
218
219 } else if (!strcmp(argv[1],"off")) {
220 pcippc2_wdt_done();
221 printf("Watchdog timer now is off\n");
222
223 return 0;
224
225 } else
226 break;
227 default:
228 break;
229 }
230 printf ("Usage:\n%s\n", cmdtp->usage);
231 return 1;
232}
233
234#endif /* CFG_CMD_BSP */
235#endif /* CONFIG_WATCHDOG */