blob: 013a6acdca2c51bcbc9962ad6d844ee00582e52d [file] [log] [blame]
Roy Zang3f7f6b82011-06-09 11:30:52 +08001/*
2 * Copyright 2010-2011 Freescale Semiconductor, Inc.
3 *
4 * Authors: Roy Zang <tie-fei.zang@freescale.com>
5 * Chunhe Lan <b25806@freescale.com>
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25
26/*
27 * p1023rds board configuration file
28 *
29 */
30#ifndef __CONFIG_H
31#define __CONFIG_H
32
33#ifdef CONFIG_NAND
34#define CONFIG_NAND_U_BOOT
35#define CONFIG_RAMBOOT_NAND
36#endif
37
38#ifdef CONFIG_NAND_U_BOOT
39#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
40#define CONFIG_SYS_TEXT_BASE 0x11001000
41
42#ifdef CONFIG_NAND_SPL
43#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
44#else
45#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
46#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
47#endif /* CONFIG_NAND_SPL */
48#endif
49
50#ifndef CONFIG_SYS_TEXT_BASE
51#define CONFIG_SYS_TEXT_BASE 0xeff80000
52#endif
53
54#ifndef CONFIG_SYS_MONITOR_BASE
55#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
56#endif
57
58#ifndef CONFIG_RESET_VECTOR_ADDRESS
59#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
60#endif
61
62/* High Level Configuration Options */
63#define CONFIG_BOOKE /* BOOKE */
64#define CONFIG_E500 /* BOOKE e500 family */
65#define CONFIG_MPC85xx
66#define CONFIG_P1023
67#define CONFIG_P1023RDS
68#define CONFIG_MP /* support multiple processors */
69
70#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
71#define CONFIG_PCI /* Enable PCI/PCIE */
72#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
73#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
74#define CONFIG_PCIE3 /* PCIE controler 3 (slot 3) */
75#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
76#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
77#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
78#define CONFIG_FSL_LAW /* Use common FSL init code */
79
80#ifndef __ASSEMBLY__
81extern unsigned long get_clock_freq(void);
82#endif
83
84#define CONFIG_SYS_CLK_FREQ 66666666
85#define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ
86
87/*
88 * These can be toggled for performance analysis, otherwise use default.
89 */
90#define CONFIG_L2_CACHE /* toggle L2 cache */
91#define CONFIG_BTB /* toggle branch predition */
92#define CONFIG_HWCONFIG
93
94#define CONFIG_ENABLE_36BIT_PHYS
95
96#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
97#define CONFIG_SYS_MEMTEST_END 0x1fffffff /* fix me, only 1G */
98#define CONFIG_PANIC_HANG /* do not reset board on panic */
99
100#define CONFIG_SYS_LBC_LBCR 0x00000000 /* Implement conversion of
101 addresses in the LBC */
Roy Zang3f7f6b82011-06-09 11:30:52 +0800102
103/* DDR Setup */
104#define CONFIG_VERY_BIG_RAM
105
106#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
107#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
108
109#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
110#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
111
112#define CONFIG_DIMM_SLOTS_PER_CTLR 1
113#define CONFIG_CHIP_SELECTS_PER_CTRL 2
114
115/* These are used when DDR doesn't use SPD. */
116#define CONFIG_SYS_SDRAM_SIZE 2048u /* DDR is 2GB */
117
118/* Default settings for "stable" mode */
119#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F
120#define CONFIG_SYS_DDR_CS1_BNDS 0x0040007F
121#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
122#define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302
123#define CONFIG_SYS_DDR_TIMING_3 0x00020000
124#define CONFIG_SYS_DDR_TIMING_0 0x40110104
125#define CONFIG_SYS_DDR_TIMING_1 0x5C59E544
126#define CONFIG_SYS_DDR_TIMING_2 0x0fA888CA
127#define CONFIG_SYS_DDR_MODE_1 0x00441210
128#define CONFIG_SYS_DDR_MODE_2 0x00000000
129#define CONFIG_SYS_DDR_MODE_CTRL 0x00000000
130#define CONFIG_SYS_DDR_INTERVAL 0x0A280100
131#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
132#define CONFIG_SYS_DDR_CLK_CTRL 0x01800000
133#define CONFIG_SYS_DDR_TIMING_4 0x00000001
134#define CONFIG_SYS_DDR_TIMING_5 0x01401400
135#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600
136#define CONFIG_SYS_DDR_WRLVL_CNTL 0x8675F605
137#define CONFIG_SYS_DDR_CONTROL 0xC70C0008 /* Type = DDR3: No Interleaving */
138#define CONFIG_SYS_DDR_CONTROL2 0x24401010
139#define CONFIG_SYS_DDR_CDR1 0x00000000
140#define CONFIG_SYS_DDR_CDR2 0x00000000
141
142#define CONFIG_SYS_DDR_ERR_INT_EN 0x00000000
143#define CONFIG_SYS_DDR_ERR_DIS 0x00000000
144#define CONFIG_SYS_DDR_SBE 0x00000000
145
146/* Settings that differ for "performance" mode */
147#define CONFIG_SYS_DDR_CS0_BNDS_PERF 0x0000007F /* Interleaving Enabled */
148#define CONFIG_SYS_DDR_CS1_BNDS_PERF 0x00000000 /* Interleaving Enabled */
149#define CONFIG_SYS_DDR_CS1_CONFIG_PERF 0x80014302
150#define CONFIG_SYS_DDR_TIMING_1_PERF 0x5C58E544
151#define CONFIG_SYS_DDR_TIMING_2_PERF 0x0FA888CA
152/* Type = DDR3: cs0-cs1 interleaving */
153#define CONFIG_SYS_DDR_CONTROL_PERF 0xC70C4008
154#define CONFIG_SYS_DDR_CDR_1 0x00000000
155#define CONFIG_SYS_DDR_CDR_2 0x00000000
156
157
158/*
159 * Memory map
160 *
161 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable
162 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable
163 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable
164 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable
165 *
166 * Localbus non-cacheable
167 * 0xe000_0000 0xe003_ffff BCSR 256K BCSR
168 * 0xee00_0000 0xefff_ffff NOR flash 32M NOR flash
169 * 0xff00_0000 0xff3f_ffff DPAA_QBMAN 4M
170 * 0xff60_0000 0xff7f_ffff CCSR 2M non-cacheable
171 * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable
172 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
173 */
174
175/*
176 * Local Bus Definitions
177 */
178#define CONFIG_SYS_BCSR_BASE 0xe0000000 /* start of on board FPGA */
179#define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE
180
181#ifndef CONFIG_NAND
182#define CONFIG_SYS_FLASH_BASE 0xee000000 /* start of FLASH 32M */
183
184#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
185
186#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
187 | BR_PS_16 | BR_V)
188#define CONFIG_FLASH_OR_PRELIM 0xfe000ff7
189
190#define CONFIG_FLASH_CFI_DRIVER
191#define CONFIG_SYS_FLASH_CFI
192#define CONFIG_SYS_FLASH_EMPTY_INFO
193
194#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
195#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
196#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
197#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
198#else
199#define CONFIG_SYS_NO_FLASH
200#endif
201
202#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
203#define CONFIG_SYS_RAMBOOT
204#endif
205
206#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f function */
207#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
208
209#define CONFIG_SYS_INIT_RAM_LOCK
210#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
211#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */
212
213#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
214#define CONFIG_SYS_GBL_DATA_OFFSET \
215 (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
216#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
217
218#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
219#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */
220
221#ifndef CONFIG_NAND_SPL
222#define CONFIG_SYS_NAND_BASE 0xffa00000
223#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
224#else
225#define CONFIG_SYS_NAND_BASE 0xfff00000
226#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
227#endif
228
229#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE}
230#define CONFIG_SYS_MAX_NAND_DEVICE 1
231#define CONFIG_MTD_NAND_VERIFY_WRITE
232#define CONFIG_CMD_NAND
233#define CONFIG_NAND_FSL_ELBC
234#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024)
235
236/* NAND boot: 4K NAND loader config */
237#define CONFIG_SYS_NAND_SPL_SIZE 0x1000
238#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) + CONFIG_SYS_NAND_SPL_SIZE)
239#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000 - CONFIG_SYS_NAND_SPL_SIZE)
240#define CONFIG_SYS_NAND_U_BOOT_START 0x11000000
241#define CONFIG_SYS_NAND_U_BOOT_OFFS (0)
242#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
243#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
244
245/* NAND flash config */
246#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
247 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
248 | BR_PS_8 /* Port Size = 8bit */ \
249 | BR_MS_FCM /* MSEL = FCM */ \
250 | BR_V) /* valid */
251#define CONFIG_SYS_NAND_OR_PRELIM (0xFFF80000 /* length 32K */ \
252 | OR_FCM_CSCT \
253 | OR_FCM_CST \
254 | OR_FCM_CHT \
255 | OR_FCM_SCY_1 \
256 | OR_FCM_TRLX \
257 | OR_FCM_EHTR)
258
259#ifdef CONFIG_RAMBOOT_NAND
260/* NAND Base Address */
261#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
262#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
263/* chip select 1 - BCSR */
264#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_BCSR_BASE_PHYS) \
265 | BR_MS_GPCM | BR_PS_8 | BR_V)
266#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \
267 | OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \
268 | OR_GPCM_EAD)
269#else
270#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
271#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
272/* chip select 1 - BCSR */
273#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_BCSR_BASE_PHYS) \
274 | BR_MS_GPCM | BR_PS_8 | BR_V)
275#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \
276 | OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \
277 | OR_GPCM_EAD)
278#endif
279
280/* Serial Port
281 * open - index 2
282 * shorted - index 1
283 */
284#define CONFIG_CONS_INDEX 1
285#undef CONFIG_SERIAL_SOFTWARE_FIFO
286#define CONFIG_SYS_NS16550
287#define CONFIG_SYS_NS16550_SERIAL
288#define CONFIG_SYS_NS16550_REG_SIZE 1
289#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
290#ifdef CONFIG_NAND_SPL
291#define CONFIG_NS16550_MIN_FUNCTIONS
292#endif
293
294#define CONFIG_SYS_BAUDRATE_TABLE \
295 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
296
297#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
298#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
299
300/* Use the HUSH parser */
301#define CONFIG_SYS_HUSH_PARSER
302#ifdef CONFIG_SYS_HUSH_PARSER
303#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
304#endif
305
306/*
307 * Pass open firmware flat tree
308 */
309#define CONFIG_OF_LIBFDT
310#define CONFIG_OF_BOARD_SETUP
311#define CONFIG_OF_STDOUT_VIA_ALIAS
312
313#define CONFIG_SYS_64BIT_VSPRINTF
314#define CONFIG_SYS_64BIT_STRTOUL
315
316/* new uImage format support */
317#define CONFIG_FIT
318#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
319
320/* I2C */
321#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
322#define CONFIG_HARD_I2C /* I2C with hardware support */
323#undef CONFIG_SOFT_I2C /* I2C bit-banged */
324#define CONFIG_I2C_MULTI_BUS
325#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
326#define CONFIG_SYS_I2C_EEPROM_ADDR 0x51
327#define CONFIG_SYS_I2C_SLAVE 0x7F
328#define CONFIG_SYS_I2C_OFFSET 0x3000
329#define CONFIG_SYS_I2C2_OFFSET 0x3100
330
331/*
332 * I2C2 EEPROM
333 */
334#define CONFIG_ID_EEPROM
335#ifdef CONFIG_ID_EEPROM
336#define CONFIG_SYS_I2C_EEPROM_NXID
337#endif
338#define CONFIG_SYS_I2C_EEPROM_ADDR 0x51
339#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
340#define CONFIG_SYS_EEPROM_BUS_NUM 0
341
342#define CONFIG_CMD_I2C
343
344/*
345 * eSPI - Enhanced SPI
346 */
347#define CONFIG_SPI_FLASH
348#define CONFIG_SPI_FLASH_ATMEL
349
350#define CONFIG_HARD_SPI
351#define CONFIG_FSL_ESPI
352
353#define CONFIG_CMD_SF
354#define CONFIG_SF_DEFAULT_SPEED 10000000
355#define CONFIG_SF_DEFAULT_MODE 0
356
357/*
358 * General PCI
359 * Memory space is mapped 1-1, but I/O space must start from 0.
360 */
361
362/* controller 3, Slot 1, tgtid 3, Base address b000 */
363#define CONFIG_SYS_PCIE3_NAME "Slot 3"
364#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000
365#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000
366#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000
367#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
368#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000
369#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
370#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000
371#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
372
373/* controller 2, direct to uli, tgtid 2, Base address 9000 */
374#define CONFIG_SYS_PCIE2_NAME "Slot 2"
375#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
376#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
377#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
378#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
379#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
380#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
381#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
382#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
383
384/* controller 1, Slot 2, tgtid 1, Base address a000 */
385#define CONFIG_SYS_PCIE1_NAME "Slot 1"
386#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000
387#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000
388#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000
389#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
390#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000
391#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
392#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000
393#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
394
395#if defined(CONFIG_PCI)
396#define CONFIG_E1000 /* Defind e1000 pci Ethernet card */
Roy Zang3f7f6b82011-06-09 11:30:52 +0800397#define CONFIG_PCI_PNP /* do pci plug-and-play */
398#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
399#endif /* CONFIG_PCI */
400
Roy Zang3f7f6b82011-06-09 11:30:52 +0800401/*
402 * Environment
403 */
404#define CONFIG_ENV_OVERWRITE
405
406#if defined(CONFIG_SYS_RAMBOOT)
407#if defined(CONFIG_RAMBOOT_NAND)
408#define CONFIG_ENV_IS_IN_NAND
409#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
410#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
411#else
412#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
413#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x4000)
414#define CONFIG_ENV_SIZE 0x2000
415#endif
416#else
417#define CONFIG_ENV_IS_IN_FLASH
418#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
419#define CONFIG_ENV_ADDR 0xfff80000
420#else
421#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
422#endif
423#define CONFIG_ENV_SIZE 0x2000
424#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
425#endif
426
427#define CONFIG_LOADS_ECHO /* echo on for serial download */
428#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
429
430/*
431 * Command line configuration.
432 */
433#include <config_cmd_default.h>
434
435#define CONFIG_CMD_IRQ
436#define CONFIG_CMD_PING
437#define CONFIG_CMD_MII
438#define CONFIG_CMD_ELF
439#define CONFIG_CMD_SETEXPR
440#define CONFIG_CMD_REGINFO
441
442#if defined(CONFIG_PCI)
443#define CONFIG_CMD_PCI
444#define CONFIG_CMD_NET
445#endif
446
447/*
448 * USB
449 */
450#define CONFIG_USB_EHCI
451
452#ifdef CONFIG_USB_EHCI
453#define CONFIG_CMD_USB
454#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
455#define CONFIG_USB_EHCI_FSL
456#define CONFIG_USB_STORAGE
457#define CONFIG_CMD_FAT
458#define CONFIG_CMD_EXT2
459#define CONFIG_CMD_FAT
460#define CONFIG_DOS_PARTITION
461#endif
462
463/*
464 * Miscellaneous configurable options
465 */
466#define CONFIG_SYS_LONGHELP /* undef to save memory */
467#define CONFIG_CMDLINE_EDITING /* Command-line editing */
468#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
469#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
470#if defined(CONFIG_CMD_KGDB)
471#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
472#else
473#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
474#endif
475/* Print Buffer Size */
476#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
477#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
478/* Boot Argument Buffer Size */
479#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
480#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
481
482/*
483 * For booting Linux, the board info and command line data
484 * have to be in the first 16 MB of memory, since this is
485 * the maximum mapped by the Linux kernel during initialization.
486 */
487#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/
488#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
489
490#if defined(CONFIG_CMD_KGDB)
491#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
492#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
493#endif
494
495/*
496 * Environment Configuration
497 */
Joe Hershbergerb3f44c22011-10-13 13:03:48 +0000498#define CONFIG_BOOTFILE "uImage"
Roy Zang3f7f6b82011-06-09 11:30:52 +0800499#define CONFIG_UBOOTPATH (u-boot.bin) /* U-Boot image on TFTP server */
500
501/* default location for tftp and bootm */
502#define CONFIG_LOADADDR 1000000
503
504#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
505
506#define CONFIG_BAUDRATE 115200
507
508/* Qman/Bman */
509#define CONFIG_SYS_DPAA_QBMAN /* support Q/Bman */
510#define CONFIG_SYS_QMAN_MEM_BASE 0xff000000
511#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
512#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
513#define CONFIG_SYS_BMAN_MEM_BASE 0xff200000
514#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
515#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
516
517/* For FM */
518#define CONFIG_SYS_DPAA_FMAN
519#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
520
521#ifdef CONFIG_SYS_DPAA_FMAN
522#define CONFIG_FMAN_ENET
Roy Zangfe1a1da2011-02-04 13:42:45 -0600523#define CONFIG_PHY_MARVELL
Roy Zang3f7f6b82011-06-09 11:30:52 +0800524#endif
525
526#ifndef CONFIG_NAND
527/* Default address of microcode for the Linux Fman driver */
528/* QE microcode/firmware address */
529#define CONFIG_SYS_FMAN_FW_ADDR 0xEF000000
Roy Zang3f7f6b82011-06-09 11:30:52 +0800530#else
531#define CONFIG_SYS_QE_FW_IN_NAND 0x1f00000
Roy Zang3f7f6b82011-06-09 11:30:52 +0800532#endif
Kumar Gala74d9d522011-07-28 14:34:30 -0500533#define CONFIG_SYS_FMAN_FW_LENGTH 0x10000
534#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_FMAN_FW_LENGTH)
Roy Zang3f7f6b82011-06-09 11:30:52 +0800535
536#ifdef CONFIG_FMAN_ENET
537#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2
538#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x7
539
540#define CONFIG_SYS_TBIPA_VALUE 8
541#define CONFIG_MII /* MII PHY management */
542#define CONFIG_ETHPRIME "FM1@DTSEC1"
543#endif
544
545#define CONFIG_EXTRA_ENV_SETTINGS \
546 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
547
548#endif /* __CONFIG_H */