blob: 274cb3600219344460a2042cc1dcb2b33fc6527c [file] [log] [blame]
Ye Licf94a342016-02-01 10:41:32 +08001/*
2 * Copyright 2014 Freescale Semiconductor, Inc.
3 *
4 * Configuration settings for the Freescale i.MX6SX Sabreauto board.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
Ye Licf94a342016-02-01 10:41:32 +08009#ifndef __CONFIG_H
10#define __CONFIG_H
11
12#include "mx6_common.h"
13
Ye Licf94a342016-02-01 10:41:32 +080014/* Size of malloc() pool */
15#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
16
17#define CONFIG_BOARD_EARLY_INIT_F
18#define CONFIG_BOARD_LATE_INIT
19
20#define CONFIG_MXC_UART
21#define CONFIG_MXC_UART_BASE UART1_BASE
22
23#define CONFIG_EXTRA_ENV_SETTINGS \
24 "script=boot.scr\0" \
25 "image=zImage\0" \
26 "console=ttymxc0\0" \
27 "fdt_high=0xffffffff\0" \
28 "initrd_high=0xffffffff\0" \
29 "fdt_file=imx6sx-sabreauto.dtb\0" \
30 "fdt_addr=0x88000000\0" \
31 "boot_fdt=try\0" \
32 "ip_dyn=yes\0" \
33 "mmcdev=0\0" \
34 "mmcpart=1\0" \
35 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
36 "mmcargs=setenv bootargs console=${console},${baudrate} " \
37 "root=${mmcroot}\0" \
38 "loadbootscript=" \
39 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
40 "bootscript=echo Running bootscript from mmc ...; " \
41 "source\0" \
42 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
43 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
44 "mmcboot=echo Booting from mmc ...; " \
45 "run mmcargs; " \
46 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
47 "if run loadfdt; then " \
48 "bootz ${loadaddr} - ${fdt_addr}; " \
49 "else " \
50 "if test ${boot_fdt} = try; then " \
51 "bootz; " \
52 "else " \
53 "echo WARN: Cannot load the DT; " \
54 "fi; " \
55 "fi; " \
56 "else " \
57 "bootz; " \
58 "fi;\0" \
59 "netargs=setenv bootargs console=${console},${baudrate} " \
60 "root=/dev/nfs " \
61 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
62 "netboot=echo Booting from net ...; " \
63 "run netargs; " \
64 "if test ${ip_dyn} = yes; then " \
65 "setenv get_cmd dhcp; " \
66 "else " \
67 "setenv get_cmd tftp; " \
68 "fi; " \
69 "${get_cmd} ${image}; " \
70 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
71 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
72 "bootz ${loadaddr} - ${fdt_addr}; " \
73 "else " \
74 "if test ${boot_fdt} = try; then " \
75 "bootz; " \
76 "else " \
77 "echo WARN: Cannot load the DT; " \
78 "fi; " \
79 "fi; " \
80 "else " \
81 "bootz; " \
82 "fi;\0"
83
84#define CONFIG_BOOTCOMMAND \
85 "mmc dev ${mmcdev};" \
86 "mmc dev ${mmcdev}; if mmc rescan; then " \
87 "if run loadbootscript; then " \
88 "run bootscript; " \
89 "else " \
90 "if run loadimage; then " \
91 "run mmcboot; " \
92 "else run netboot; " \
93 "fi; " \
94 "fi; " \
95 "else run netboot; fi"
96
97/* Miscellaneous configurable options */
98#define CONFIG_SYS_MEMTEST_START 0x80000000
99#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
100
101#define CONFIG_STACKSIZE SZ_128K
102
103/* Physical Memory Map */
104#define CONFIG_NR_DRAM_BANKS 1
105#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
Ye Licf94a342016-02-01 10:41:32 +0800106
107#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
108#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
109#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
110
111#define CONFIG_SYS_INIT_SP_OFFSET \
112 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
113#define CONFIG_SYS_INIT_SP_ADDR \
114 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
115
116/* MMC Configuration */
117#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR
118
119/* I2C Configs */
Ye Licf94a342016-02-01 10:41:32 +0800120#define CONFIG_SYS_I2C
121#define CONFIG_SYS_I2C_MXC
122#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
123#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
124#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
125#define CONFIG_SYS_I2C_SPEED 100000
126
127/* PMIC */
128#define CONFIG_POWER
129#define CONFIG_POWER_I2C
130#define CONFIG_POWER_PFUZE100
131#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
132
133/* NAND flash command */
134#define CONFIG_CMD_NAND
135#define CONFIG_CMD_NAND_TRIMFFS
136
137/* NAND stuff */
138#define CONFIG_NAND_MXS
139#define CONFIG_SYS_MAX_NAND_DEVICE 1
140#define CONFIG_SYS_NAND_BASE 0x40000000
141#define CONFIG_SYS_NAND_5_ADDR_CYCLE
142#define CONFIG_SYS_NAND_ONFI_DETECTION
143
144/* DMA stuff, needed for GPMI/MXS NAND support */
145#define CONFIG_APBH_DMA
146#define CONFIG_APBH_DMA_BURST
147#define CONFIG_APBH_DMA_BURST8
148
149/* Network */
Ye Licf94a342016-02-01 10:41:32 +0800150
151#define CONFIG_FEC_MXC
152#define CONFIG_MII
153
154#define IMX_FEC_BASE ENET2_BASE_ADDR
155#define CONFIG_FEC_MXC_PHYADDR 0x0
156
157#define CONFIG_FEC_XCV_TYPE RGMII
158#define CONFIG_ETHPRIME "FEC"
159
160#define CONFIG_PHYLIB
161#define CONFIG_PHY_ATHEROS
162
Ye Licf94a342016-02-01 10:41:32 +0800163#ifdef CONFIG_CMD_USB
164#define CONFIG_USB_EHCI
165#define CONFIG_USB_EHCI_MX6
Ye Licf94a342016-02-01 10:41:32 +0800166#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
167#define CONFIG_USB_HOST_ETHER
168#define CONFIG_USB_ETHER_ASIX
169#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
170#define CONFIG_MXC_USB_FLAGS 0
171#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
172#endif
173
174#define CONFIG_IMX_THERMAL
175
Ye Licf94a342016-02-01 10:41:32 +0800176#define CONFIG_FSL_QSPI
177#ifdef CONFIG_FSL_QSPI
Ye Licf94a342016-02-01 10:41:32 +0800178#define CONFIG_SYS_FSL_QSPI_AHB
179#define CONFIG_SF_DEFAULT_BUS 0
180#define CONFIG_SF_DEFAULT_CS 0
181#define CONFIG_SF_DEFAULT_SPEED 40000000
182#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
183#define FSL_QSPI_FLASH_SIZE SZ_32M
184#define FSL_QSPI_FLASH_NUM 2
185#endif
186
187#define CONFIG_ENV_OFFSET (8 * SZ_64K)
188#define CONFIG_ENV_SIZE SZ_8K
189#define CONFIG_ENV_IS_IN_MMC
190
191#define CONFIG_SYS_FSL_USDHC_NUM 2
192#if defined(CONFIG_ENV_IS_IN_MMC)
193#define CONFIG_SYS_MMC_ENV_DEV 0 /*USDHC3*/
194#endif
195
196#define CONFIG_PCA953X
197#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} }
198
199#endif /* __CONFIG_H */