Kever Yang | a667268 | 2017-04-19 18:17:32 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | #include <dt-bindings/pwm/pwm.h> |
| 9 | #include <dt-bindings/pinctrl/rockchip.h> |
| 10 | #include "rk3399.dtsi" |
Kever Yang | 56f2dd0 | 2017-07-18 21:55:08 +0800 | [diff] [blame] | 11 | #include "rk3399-sdram-ddr3-1600.dtsi" |
Kever Yang | a667268 | 2017-04-19 18:17:32 +0800 | [diff] [blame] | 12 | |
| 13 | / { |
| 14 | model = "Firefly-RK3399 Board"; |
| 15 | compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; |
| 16 | |
| 17 | chosen { |
| 18 | stdout-path = &uart2; |
Kever Yang | 522cd58 | 2017-06-14 16:31:47 +0800 | [diff] [blame] | 19 | u-boot,spl-boot-order = &sdhci, &sdmmc; |
Kever Yang | a667268 | 2017-04-19 18:17:32 +0800 | [diff] [blame] | 20 | }; |
| 21 | |
| 22 | backlight: backlight { |
| 23 | compatible = "pwm-backlight"; |
| 24 | enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; |
| 25 | pwms = <&pwm0 0 25000 0>; |
| 26 | brightness-levels = < |
| 27 | 0 1 2 3 4 5 6 7 |
| 28 | 8 9 10 11 12 13 14 15 |
| 29 | 16 17 18 19 20 21 22 23 |
| 30 | 24 25 26 27 28 29 30 31 |
| 31 | 32 33 34 35 36 37 38 39 |
| 32 | 40 41 42 43 44 45 46 47 |
| 33 | 48 49 50 51 52 53 54 55 |
| 34 | 56 57 58 59 60 61 62 63 |
| 35 | 64 65 66 67 68 69 70 71 |
| 36 | 72 73 74 75 76 77 78 79 |
| 37 | 80 81 82 83 84 85 86 87 |
| 38 | 88 89 90 91 92 93 94 95 |
| 39 | 96 97 98 99 100 101 102 103 |
| 40 | 104 105 106 107 108 109 110 111 |
| 41 | 112 113 114 115 116 117 118 119 |
| 42 | 120 121 122 123 124 125 126 127 |
| 43 | 128 129 130 131 132 133 134 135 |
| 44 | 136 137 138 139 140 141 142 143 |
| 45 | 144 145 146 147 148 149 150 151 |
| 46 | 152 153 154 155 156 157 158 159 |
| 47 | 160 161 162 163 164 165 166 167 |
| 48 | 168 169 170 171 172 173 174 175 |
| 49 | 176 177 178 179 180 181 182 183 |
| 50 | 184 185 186 187 188 189 190 191 |
| 51 | 192 193 194 195 196 197 198 199 |
| 52 | 200 201 202 203 204 205 206 207 |
| 53 | 208 209 210 211 212 213 214 215 |
| 54 | 216 217 218 219 220 221 222 223 |
| 55 | 224 225 226 227 228 229 230 231 |
| 56 | 232 233 234 235 236 237 238 239 |
| 57 | 240 241 242 243 244 245 246 247 |
| 58 | 248 249 250 251 252 253 254 255>; |
| 59 | default-brightness-level = <200>; |
| 60 | }; |
| 61 | |
| 62 | clkin_gmac: external-gmac-clock { |
| 63 | compatible = "fixed-clock"; |
| 64 | clock-frequency = <125000000>; |
| 65 | clock-output-names = "clkin_gmac"; |
| 66 | #clock-cells = <0>; |
| 67 | }; |
| 68 | |
| 69 | rt5640-sound { |
| 70 | compatible = "simple-audio-card"; |
| 71 | simple-audio-card,name = "rockchip,rt5640-codec"; |
| 72 | simple-audio-card,format = "i2s"; |
| 73 | simple-audio-card,mclk-fs = <256>; |
| 74 | simple-audio-card,widgets = |
| 75 | "Microphone", "Mic Jack", |
| 76 | "Headphone", "Headphone Jack"; |
| 77 | simple-audio-card,routing = |
| 78 | "Mic Jack", "MICBIAS1", |
| 79 | "IN1P", "Mic Jack", |
| 80 | "Headphone Jack", "HPOL", |
| 81 | "Headphone Jack", "HPOR"; |
| 82 | |
| 83 | simple-audio-card,cpu { |
| 84 | sound-dai = <&i2s1>; |
| 85 | }; |
| 86 | |
| 87 | simple-audio-card,codec { |
| 88 | sound-dai = <&rt5640>; |
| 89 | }; |
| 90 | }; |
| 91 | |
| 92 | sdio_pwrseq: sdio-pwrseq { |
| 93 | compatible = "mmc-pwrseq-simple"; |
| 94 | clocks = <&rk808 1>; |
| 95 | clock-names = "ext_clock"; |
| 96 | pinctrl-names = "default"; |
| 97 | pinctrl-0 = <&wifi_enable_h>; |
| 98 | |
| 99 | /* |
| 100 | * On the module itself this is one of these (depending |
| 101 | * on the actual card populated): |
| 102 | * - SDIO_RESET_L_WL_REG_ON |
| 103 | * - PDN (power down when low) |
| 104 | */ |
| 105 | reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; |
| 106 | }; |
| 107 | |
| 108 | vcc3v3_pcie: vcc3v3-pcie-regulator { |
| 109 | compatible = "regulator-fixed"; |
| 110 | enable-active-high; |
| 111 | gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; |
| 112 | pinctrl-names = "default"; |
| 113 | pinctrl-0 = <&pcie_drv>; |
| 114 | regulator-name = "vcc3v3_pcie"; |
| 115 | regulator-always-on; |
| 116 | regulator-boot-on; |
| 117 | }; |
| 118 | |
| 119 | vcc3v3_sys: vcc3v3-sys { |
| 120 | compatible = "regulator-fixed"; |
| 121 | regulator-name = "vcc3v3_sys"; |
| 122 | regulator-always-on; |
| 123 | regulator-boot-on; |
| 124 | regulator-min-microvolt = <3300000>; |
| 125 | regulator-max-microvolt = <3300000>; |
| 126 | }; |
| 127 | |
| 128 | vcc5v0_host: vcc5v0-host-regulator { |
| 129 | compatible = "regulator-fixed"; |
| 130 | enable-active-high; |
| 131 | gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; |
| 132 | pinctrl-names = "default"; |
| 133 | pinctrl-0 = <&host_vbus_drv>; |
| 134 | regulator-name = "vcc5v0_host"; |
| 135 | regulator-always-on; |
| 136 | }; |
| 137 | |
| 138 | vcc5v0_sys: vcc5v0-sys { |
| 139 | compatible = "regulator-fixed"; |
| 140 | regulator-name = "vcc5v0_sys"; |
| 141 | regulator-always-on; |
| 142 | regulator-boot-on; |
| 143 | regulator-min-microvolt = <5000000>; |
| 144 | regulator-max-microvolt = <5000000>; |
| 145 | }; |
| 146 | |
| 147 | vcc_phy: vcc-phy-regulator { |
| 148 | compatible = "regulator-fixed"; |
| 149 | regulator-name = "vcc_phy"; |
| 150 | regulator-always-on; |
| 151 | regulator-boot-on; |
| 152 | }; |
| 153 | |
| 154 | vdd_log: vdd-log { |
| 155 | compatible = "pwm-regulator"; |
| 156 | pwms = <&pwm2 0 25000 1>; |
| 157 | regulator-name = "vdd_log"; |
| 158 | regulator-always-on; |
| 159 | regulator-boot-on; |
Kever Yang | 7ba3182 | 2017-07-19 19:54:20 +0800 | [diff] [blame] | 160 | regulator-min-microvolt = <430000>; |
Kever Yang | a667268 | 2017-04-19 18:17:32 +0800 | [diff] [blame] | 161 | regulator-max-microvolt = <1400000>; |
Kever Yang | 7ba3182 | 2017-07-19 19:54:20 +0800 | [diff] [blame] | 162 | regulator-init-microvolt = <950000>; |
Kever Yang | a667268 | 2017-04-19 18:17:32 +0800 | [diff] [blame] | 163 | }; |
| 164 | |
| 165 | vccadc_ref: vccadc-ref { |
| 166 | compatible = "regulator-fixed"; |
| 167 | regulator-name = "vcc1v8_sys"; |
| 168 | regulator-always-on; |
| 169 | regulator-boot-on; |
| 170 | regulator-min-microvolt = <1800000>; |
| 171 | regulator-max-microvolt = <1800000>; |
| 172 | }; |
| 173 | }; |
| 174 | |
| 175 | &cpu_l0 { |
| 176 | cpu-supply = <&vdd_cpu_l>; |
| 177 | }; |
| 178 | |
| 179 | &cpu_l1 { |
| 180 | cpu-supply = <&vdd_cpu_l>; |
| 181 | }; |
| 182 | |
| 183 | &cpu_l2 { |
| 184 | cpu-supply = <&vdd_cpu_l>; |
| 185 | }; |
| 186 | |
| 187 | &cpu_l3 { |
| 188 | cpu-supply = <&vdd_cpu_l>; |
| 189 | }; |
| 190 | |
| 191 | &cpu_b0 { |
| 192 | cpu-supply = <&vdd_cpu_b>; |
| 193 | }; |
| 194 | |
| 195 | &cpu_b1 { |
| 196 | cpu-supply = <&vdd_cpu_b>; |
| 197 | }; |
| 198 | |
| 199 | &emmc_phy { |
| 200 | status = "okay"; |
| 201 | }; |
| 202 | |
| 203 | &gmac { |
| 204 | assigned-clocks = <&cru SCLK_RMII_SRC>; |
| 205 | assigned-clock-parents = <&clkin_gmac>; |
| 206 | clock_in_out = "input"; |
| 207 | phy-supply = <&vcc_phy>; |
| 208 | phy-mode = "rgmii"; |
| 209 | pinctrl-names = "default"; |
| 210 | pinctrl-0 = <&rgmii_pins>; |
| 211 | snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; |
| 212 | snps,reset-active-low; |
| 213 | snps,reset-delays-us = <0 10000 50000>; |
Kever Yang | 1ade3a9 | 2017-08-01 09:40:04 +0800 | [diff] [blame] | 214 | tx_delay = <0x33>; |
| 215 | rx_delay = <0x45>; |
Kever Yang | a667268 | 2017-04-19 18:17:32 +0800 | [diff] [blame] | 216 | status = "okay"; |
| 217 | }; |
| 218 | |
| 219 | &i2c0 { |
| 220 | clock-frequency = <400000>; |
| 221 | i2c-scl-rising-time-ns = <168>; |
| 222 | i2c-scl-falling-time-ns = <4>; |
| 223 | status = "okay"; |
| 224 | |
| 225 | rk808: pmic@1b { |
| 226 | compatible = "rockchip,rk808"; |
| 227 | reg = <0x1b>; |
| 228 | interrupt-parent = <&gpio1>; |
| 229 | interrupts = <21 IRQ_TYPE_LEVEL_LOW>; |
| 230 | #clock-cells = <1>; |
| 231 | clock-output-names = "xin32k", "rk808-clkout2"; |
| 232 | pinctrl-names = "default"; |
| 233 | pinctrl-0 = <&pmic_int_l>; |
| 234 | rockchip,system-power-controller; |
| 235 | wakeup-source; |
| 236 | |
| 237 | vcc1-supply = <&vcc3v3_sys>; |
| 238 | vcc2-supply = <&vcc3v3_sys>; |
| 239 | vcc3-supply = <&vcc3v3_sys>; |
| 240 | vcc4-supply = <&vcc3v3_sys>; |
| 241 | vcc6-supply = <&vcc3v3_sys>; |
| 242 | vcc7-supply = <&vcc3v3_sys>; |
| 243 | vcc8-supply = <&vcc3v3_sys>; |
| 244 | vcc9-supply = <&vcc3v3_sys>; |
| 245 | vcc10-supply = <&vcc3v3_sys>; |
| 246 | vcc11-supply = <&vcc3v3_sys>; |
| 247 | vcc12-supply = <&vcc3v3_sys>; |
| 248 | vddio-supply = <&vcc1v8_pmu>; |
| 249 | |
| 250 | regulators { |
| 251 | vdd_center: DCDC_REG1 { |
| 252 | regulator-name = "vdd_center"; |
| 253 | regulator-always-on; |
| 254 | regulator-boot-on; |
| 255 | regulator-min-microvolt = <750000>; |
| 256 | regulator-max-microvolt = <1350000>; |
| 257 | regulator-ramp-delay = <6001>; |
| 258 | regulator-state-mem { |
| 259 | regulator-off-in-suspend; |
| 260 | }; |
| 261 | }; |
| 262 | |
| 263 | vdd_cpu_l: DCDC_REG2 { |
| 264 | regulator-name = "vdd_cpu_l"; |
| 265 | regulator-always-on; |
| 266 | regulator-boot-on; |
| 267 | regulator-min-microvolt = <750000>; |
| 268 | regulator-max-microvolt = <1350000>; |
| 269 | regulator-ramp-delay = <6001>; |
| 270 | regulator-state-mem { |
| 271 | regulator-off-in-suspend; |
| 272 | }; |
| 273 | }; |
| 274 | |
| 275 | vcc_ddr: DCDC_REG3 { |
| 276 | regulator-name = "vcc_ddr"; |
| 277 | regulator-always-on; |
| 278 | regulator-boot-on; |
| 279 | regulator-state-mem { |
| 280 | regulator-on-in-suspend; |
| 281 | }; |
| 282 | }; |
| 283 | |
| 284 | vcc_1v8: DCDC_REG4 { |
| 285 | regulator-name = "vcc_1v8"; |
| 286 | regulator-always-on; |
| 287 | regulator-boot-on; |
| 288 | regulator-min-microvolt = <1800000>; |
| 289 | regulator-max-microvolt = <1800000>; |
| 290 | regulator-state-mem { |
| 291 | regulator-on-in-suspend; |
| 292 | regulator-suspend-microvolt = <1800000>; |
| 293 | }; |
| 294 | }; |
| 295 | |
| 296 | vcc1v8_dvp: LDO_REG1 { |
| 297 | regulator-name = "vcc1v8_dvp"; |
| 298 | regulator-always-on; |
| 299 | regulator-boot-on; |
| 300 | regulator-min-microvolt = <1800000>; |
| 301 | regulator-max-microvolt = <1800000>; |
| 302 | regulator-state-mem { |
| 303 | regulator-off-in-suspend; |
| 304 | }; |
| 305 | }; |
| 306 | |
| 307 | vcc3v0_tp: LDO_REG2 { |
| 308 | regulator-name = "vcc3v0_tp"; |
| 309 | regulator-always-on; |
| 310 | regulator-boot-on; |
| 311 | regulator-min-microvolt = <3000000>; |
| 312 | regulator-max-microvolt = <3000000>; |
| 313 | regulator-state-mem { |
| 314 | regulator-off-in-suspend; |
| 315 | }; |
| 316 | }; |
| 317 | |
| 318 | vcc1v8_pmu: LDO_REG3 { |
| 319 | regulator-name = "vcc1v8_pmu"; |
| 320 | regulator-always-on; |
| 321 | regulator-boot-on; |
| 322 | regulator-min-microvolt = <1800000>; |
| 323 | regulator-max-microvolt = <1800000>; |
| 324 | regulator-state-mem { |
| 325 | regulator-on-in-suspend; |
| 326 | regulator-suspend-microvolt = <1800000>; |
| 327 | }; |
| 328 | }; |
| 329 | |
| 330 | vcc_sd: LDO_REG4 { |
| 331 | regulator-name = "vcc_sd"; |
| 332 | regulator-always-on; |
| 333 | regulator-boot-on; |
| 334 | regulator-min-microvolt = <1800000>; |
Klaus Goger | 4f70039 | 2017-11-06 23:02:55 +0100 | [diff] [blame] | 335 | regulator-max-microvolt = <3000000>; |
Kever Yang | a667268 | 2017-04-19 18:17:32 +0800 | [diff] [blame] | 336 | regulator-state-mem { |
| 337 | regulator-on-in-suspend; |
Klaus Goger | 4f70039 | 2017-11-06 23:02:55 +0100 | [diff] [blame] | 338 | regulator-suspend-microvolt = <3000000>; |
Kever Yang | a667268 | 2017-04-19 18:17:32 +0800 | [diff] [blame] | 339 | }; |
| 340 | }; |
| 341 | |
| 342 | vcca3v0_codec: LDO_REG5 { |
| 343 | regulator-name = "vcca3v0_codec"; |
| 344 | regulator-always-on; |
| 345 | regulator-boot-on; |
| 346 | regulator-min-microvolt = <3000000>; |
| 347 | regulator-max-microvolt = <3000000>; |
| 348 | regulator-state-mem { |
| 349 | regulator-off-in-suspend; |
| 350 | }; |
| 351 | }; |
| 352 | |
| 353 | vcc_1v5: LDO_REG6 { |
| 354 | regulator-name = "vcc_1v5"; |
| 355 | regulator-always-on; |
| 356 | regulator-boot-on; |
| 357 | regulator-min-microvolt = <1500000>; |
| 358 | regulator-max-microvolt = <1500000>; |
| 359 | regulator-state-mem { |
| 360 | regulator-on-in-suspend; |
| 361 | regulator-suspend-microvolt = <1500000>; |
| 362 | }; |
| 363 | }; |
| 364 | |
| 365 | vcca1v8_codec: LDO_REG7 { |
| 366 | regulator-name = "vcca1v8_codec"; |
| 367 | regulator-always-on; |
| 368 | regulator-boot-on; |
| 369 | regulator-min-microvolt = <1800000>; |
| 370 | regulator-max-microvolt = <1800000>; |
| 371 | regulator-state-mem { |
| 372 | regulator-off-in-suspend; |
| 373 | }; |
| 374 | }; |
| 375 | |
| 376 | vcc_3v0: LDO_REG8 { |
| 377 | regulator-name = "vcc_3v0"; |
| 378 | regulator-always-on; |
| 379 | regulator-boot-on; |
| 380 | regulator-min-microvolt = <3000000>; |
| 381 | regulator-max-microvolt = <3000000>; |
| 382 | regulator-state-mem { |
| 383 | regulator-on-in-suspend; |
| 384 | regulator-suspend-microvolt = <3000000>; |
| 385 | }; |
| 386 | }; |
| 387 | |
| 388 | vcc3v3_s3: SWITCH_REG1 { |
| 389 | regulator-name = "vcc3v3_s3"; |
| 390 | regulator-always-on; |
| 391 | regulator-boot-on; |
| 392 | regulator-state-mem { |
| 393 | regulator-off-in-suspend; |
| 394 | }; |
| 395 | }; |
| 396 | |
| 397 | vcc3v3_s0: SWITCH_REG2 { |
| 398 | regulator-name = "vcc3v3_s0"; |
| 399 | regulator-always-on; |
| 400 | regulator-boot-on; |
| 401 | regulator-state-mem { |
| 402 | regulator-off-in-suspend; |
| 403 | }; |
| 404 | }; |
| 405 | }; |
| 406 | }; |
| 407 | |
| 408 | vdd_cpu_b: regulator@40 { |
| 409 | compatible = "silergy,syr827"; |
| 410 | reg = <0x40>; |
| 411 | fcs,suspend-voltage-selector = <0>; |
| 412 | regulator-name = "vdd_cpu_b"; |
| 413 | regulator-min-microvolt = <712500>; |
| 414 | regulator-max-microvolt = <1500000>; |
| 415 | regulator-ramp-delay = <1000>; |
| 416 | regulator-always-on; |
| 417 | regulator-boot-on; |
| 418 | vin-supply = <&vcc5v0_sys>; |
| 419 | |
| 420 | regulator-state-mem { |
| 421 | regulator-off-in-suspend; |
| 422 | }; |
| 423 | }; |
| 424 | |
| 425 | vdd_gpu: regulator@41 { |
| 426 | compatible = "silergy,syr828"; |
| 427 | reg = <0x41>; |
| 428 | fcs,suspend-voltage-selector = <1>; |
| 429 | regulator-name = "vdd_gpu"; |
| 430 | regulator-min-microvolt = <712500>; |
| 431 | regulator-max-microvolt = <1500000>; |
| 432 | regulator-ramp-delay = <1000>; |
| 433 | regulator-always-on; |
| 434 | regulator-boot-on; |
| 435 | vin-supply = <&vcc5v0_sys>; |
| 436 | |
| 437 | regulator-state-mem { |
| 438 | regulator-off-in-suspend; |
| 439 | }; |
| 440 | }; |
| 441 | }; |
| 442 | |
| 443 | &i2c1 { |
| 444 | i2c-scl-rising-time-ns = <300>; |
| 445 | i2c-scl-falling-time-ns = <15>; |
| 446 | status = "okay"; |
| 447 | |
| 448 | rt5640: rt5640@1c { |
| 449 | compatible = "realtek,rt5640"; |
| 450 | reg = <0x1c>; |
| 451 | clocks = <&cru SCLK_I2S_8CH_OUT>; |
| 452 | clock-names = "mclk"; |
| 453 | realtek,in1-differential; |
| 454 | #sound-dai-cells = <0>; |
| 455 | pinctrl-names = "default"; |
| 456 | pinctrl-0 = <&rt5640_hpcon>; |
| 457 | }; |
| 458 | }; |
| 459 | |
| 460 | &i2c3 { |
| 461 | i2c-scl-rising-time-ns = <450>; |
| 462 | i2c-scl-falling-time-ns = <15>; |
| 463 | status = "okay"; |
| 464 | }; |
| 465 | |
| 466 | &i2c4 { |
| 467 | i2c-scl-rising-time-ns = <600>; |
| 468 | i2c-scl-falling-time-ns = <20>; |
| 469 | status = "okay"; |
| 470 | |
| 471 | accelerometer@68 { |
| 472 | compatible = "invensense,mpu6500"; |
| 473 | reg = <0x68>; |
| 474 | interrupt-parent = <&gpio1>; |
| 475 | interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>; |
| 476 | }; |
| 477 | }; |
| 478 | |
| 479 | &i2s0 { |
| 480 | rockchip,playback-channels = <8>; |
| 481 | rockchip,capture-channels = <8>; |
| 482 | #sound-dai-cells = <0>; |
| 483 | status = "okay"; |
| 484 | }; |
| 485 | |
| 486 | &i2s1 { |
| 487 | rockchip,playback-channels = <2>; |
| 488 | rockchip,capture-channels = <2>; |
| 489 | #sound-dai-cells = <0>; |
| 490 | status = "okay"; |
| 491 | }; |
| 492 | |
| 493 | &i2s2 { |
| 494 | #sound-dai-cells = <0>; |
| 495 | status = "okay"; |
| 496 | }; |
| 497 | |
| 498 | &io_domains { |
| 499 | status = "okay"; |
| 500 | |
| 501 | bt656-supply = <&vcc1v8_dvp>; |
| 502 | audio-supply = <&vcca1v8_codec>; |
| 503 | sdmmc-supply = <&vcc_sd>; |
| 504 | gpio1830-supply = <&vcc_3v0>; |
| 505 | }; |
| 506 | |
| 507 | &pcie_phy { |
| 508 | status = "okay"; |
| 509 | }; |
| 510 | |
| 511 | &pcie0 { |
| 512 | ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; |
| 513 | num-lanes = <4>; |
| 514 | pinctrl-names = "default"; |
| 515 | pinctrl-0 = <&pcie_clkreqn>; |
| 516 | status = "okay"; |
| 517 | }; |
| 518 | |
| 519 | &pmu_io_domains { |
| 520 | pmu1830-supply = <&vcc_3v0>; |
| 521 | status = "okay"; |
| 522 | }; |
| 523 | |
| 524 | &pinctrl { |
| 525 | buttons { |
| 526 | pwrbtn: pwrbtn { |
| 527 | rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 528 | }; |
| 529 | }; |
| 530 | |
| 531 | lcd-panel { |
| 532 | lcd_panel_reset: lcd-panel-reset { |
| 533 | rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; |
| 534 | }; |
| 535 | }; |
| 536 | |
| 537 | pcie { |
| 538 | pcie_drv: pcie-drv { |
| 539 | rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 540 | }; |
| 541 | |
| 542 | pcie_3g_drv: pcie-3g-drv { |
| 543 | rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 544 | }; |
| 545 | }; |
| 546 | |
| 547 | pmic { |
| 548 | vsel1_gpio: vsel1-gpio { |
| 549 | rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; |
| 550 | }; |
| 551 | |
| 552 | vsel2_gpio: vsel2-gpio { |
| 553 | rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; |
| 554 | }; |
| 555 | }; |
| 556 | |
| 557 | sdio-pwrseq { |
| 558 | wifi_enable_h: wifi-enable-h { |
| 559 | rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 560 | }; |
| 561 | }; |
| 562 | |
| 563 | rt5640 { |
| 564 | rt5640_hpcon: rt5640-hpcon { |
| 565 | rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 566 | }; |
| 567 | }; |
| 568 | |
| 569 | pmic { |
| 570 | pmic_int_l: pmic-int-l { |
| 571 | rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 572 | }; |
| 573 | }; |
| 574 | |
| 575 | usb2 { |
| 576 | host_vbus_drv: host-vbus-drv { |
| 577 | rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 578 | }; |
| 579 | }; |
| 580 | }; |
| 581 | |
| 582 | &pwm0 { |
| 583 | status = "okay"; |
| 584 | }; |
| 585 | |
| 586 | &pwm2 { |
| 587 | status = "okay"; |
| 588 | }; |
| 589 | |
| 590 | &saradc { |
| 591 | vref-supply = <&vccadc_ref>; |
| 592 | status = "okay"; |
| 593 | }; |
| 594 | |
Kever Yang | 522cd58 | 2017-06-14 16:31:47 +0800 | [diff] [blame] | 595 | &sdmmc { |
| 596 | u-boot,dm-pre-reloc; |
| 597 | bus-width = <4>; |
| 598 | status = "okay"; |
| 599 | }; |
| 600 | |
Kever Yang | a667268 | 2017-04-19 18:17:32 +0800 | [diff] [blame] | 601 | &sdhci { |
| 602 | bus-width = <8>; |
| 603 | keep-power-in-suspend; |
| 604 | mmc-hs400-1_8v; |
| 605 | mmc-hs400-enhanced-strobe; |
| 606 | non-removable; |
| 607 | status = "okay"; |
| 608 | }; |
| 609 | |
| 610 | &tsadc { |
| 611 | /* tshut mode 0:CRU 1:GPIO */ |
| 612 | rockchip,hw-tshut-mode = <1>; |
| 613 | /* tshut polarity 0:LOW 1:HIGH */ |
| 614 | rockchip,hw-tshut-polarity = <1>; |
| 615 | status = "okay"; |
| 616 | }; |
| 617 | |
| 618 | &u2phy0 { |
| 619 | status = "okay"; |
| 620 | |
| 621 | u2phy0_otg: otg-port { |
| 622 | status = "okay"; |
| 623 | }; |
| 624 | |
| 625 | u2phy0_host: host-port { |
| 626 | phy-supply = <&vcc5v0_host>; |
| 627 | status = "okay"; |
| 628 | }; |
| 629 | }; |
| 630 | |
| 631 | &u2phy1 { |
| 632 | status = "okay"; |
| 633 | |
| 634 | u2phy1_otg: otg-port { |
| 635 | status = "okay"; |
| 636 | }; |
| 637 | |
| 638 | u2phy1_host: host-port { |
| 639 | phy-supply = <&vcc5v0_host>; |
| 640 | status = "okay"; |
| 641 | }; |
| 642 | }; |
| 643 | |
| 644 | &uart0 { |
| 645 | pinctrl-names = "default"; |
| 646 | pinctrl-0 = <&uart0_xfer &uart0_cts>; |
| 647 | status = "okay"; |
| 648 | }; |
| 649 | |
| 650 | &uart2 { |
| 651 | status = "okay"; |
| 652 | }; |
| 653 | |
| 654 | &usb_host0_ehci { |
| 655 | status = "okay"; |
| 656 | }; |
| 657 | |
| 658 | &usb_host0_ohci { |
| 659 | status = "okay"; |
| 660 | }; |
| 661 | |
| 662 | &usb_host1_ehci { |
| 663 | status = "okay"; |
| 664 | }; |
| 665 | |
| 666 | &usb_host1_ohci { |
| 667 | status = "okay"; |
| 668 | }; |