blob: 9d016c59d3c42a24fe5fe9ca19ec0439948f8038 [file] [log] [blame]
wdenkeee810b2002-10-16 11:27:53 +00001/*
2 * (C) Copyright 2001-2002
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#include <common.h>
25#include <mpc8xx.h>
26
27/* ------------------------------------------------------------------------- */
28
29static long int dram_size (long int, long int *, long int);
30
31/* ------------------------------------------------------------------------- */
32
33#define _NOT_USED_ 0xFFFFFFFF
34
35const uint sdram_table[] =
36{
37 /*
38 * Single Read. (Offset 0 in UPMA RAM)
39 */
40 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
41 0x1FF77C47, /* last */
42 /*
43 * SDRAM Initialization (offset 5 in UPMA RAM)
44 *
45 * This is no UPM entry point. The following definition uses
46 * the remaining space to establish an initialization
47 * sequence, which is executed by a RUN command.
48 *
49 */
50 0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */
51 /*
52 * Burst Read. (Offset 8 in UPMA RAM)
53 */
54 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
55 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
56 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
57 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
58 /*
59 * Single Write. (Offset 18 in UPMA RAM)
60 */
61 0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
62 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
63 /*
64 * Burst Write. (Offset 20 in UPMA RAM)
65 */
66 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
67 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
68 _NOT_USED_,
69 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
70 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
71 /*
72 * Refresh (Offset 30 in UPMA RAM)
73 */
74 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
75 0xFFFFFC84, 0xFFFFFC07, /* last */
76 _NOT_USED_, _NOT_USED_,
77 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
78 /*
79 * Exception. (Offset 3c in UPMA RAM)
80 */
81 0x7FFFFC07, /* last */
82 _NOT_USED_, _NOT_USED_, _NOT_USED_,
83};
84
85/* ------------------------------------------------------------------------- */
86
87
88/*
89 * Check Board Identity:
90 *
91 * Always return 1 (no second DRAM bank).
92 */
93
94int checkboard (void)
95{
Wolfgang Denk77ddac92005-10-13 16:45:02 +020096 char *s = getenv ("serial#");
wdenkeee810b2002-10-16 11:27:53 +000097
98 puts ("Board: RRvision ");
99
100 for (; s && *s; ++s) {
101 if (*s == ' ')
102 break;
103 putc (*s);
104 }
105
106 putc ('\n');
107
108 return (0);
109}
110
111/* ------------------------------------------------------------------------- */
112
Becky Bruce9973e3c2008-06-09 16:03:40 -0500113phys_size_t initdram (int board_type)
wdenkeee810b2002-10-16 11:27:53 +0000114{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200115 volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
wdenkeee810b2002-10-16 11:27:53 +0000116 volatile memctl8xx_t *memctl = &immap->im_memctl;
117 unsigned long reg;
118 long int size8, size9;
119 long int size = 0;
120
121 upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table) / sizeof(uint));
122
123 /*
124 * Preliminary prescaler for refresh (depends on number of
125 * banks): This value is selected for four cycles every 62.4 us
126 * with two SDRAM banks or four cycles every 31.2 us with one
127 * bank. It will be adjusted after memory sizing.
128 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200129 memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
wdenkeee810b2002-10-16 11:27:53 +0000130
131 memctl->memc_mar = 0x00000088;
132
133 /*
134 * Map controller bank 1 the SDRAM bank 2 at physical address 0.
135 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200136 memctl->memc_or1 = CONFIG_SYS_OR2_PRELIM;
137 memctl->memc_br1 = CONFIG_SYS_BR2_PRELIM;
wdenkeee810b2002-10-16 11:27:53 +0000138
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200139 memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
wdenkeee810b2002-10-16 11:27:53 +0000140
141 udelay (200);
142
143 /* perform SDRAM initializsation sequence */
144
145 memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
146 udelay (1);
147 memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - execute twice */
148 udelay (1);
149
150 memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
151
152 udelay (1000);
153
154 /*
155 * Check Bank 0 Memory Size
156 *
157 * try 8 column mode
158 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200159 size8 = dram_size (CONFIG_SYS_MAMR_8COL,
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200160 SDRAM_BASE2_PRELIM,
wdenkeee810b2002-10-16 11:27:53 +0000161 SDRAM_MAX_SIZE);
162
163 udelay (1000);
164
165 /*
166 * try 9 column mode
167 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200168 size9 = dram_size (CONFIG_SYS_MAMR_9COL,
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200169 SDRAM_BASE2_PRELIM,
wdenkeee810b2002-10-16 11:27:53 +0000170 SDRAM_MAX_SIZE);
171
172 if (size8 < size9) { /* leave configuration at 9 columns */
173 size = size9;
174/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
175 } else { /* back to 8 columns */
176 size = size8;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200177 memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
wdenkeee810b2002-10-16 11:27:53 +0000178 udelay (500);
179/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
180 }
181
182 udelay (1000);
183
184 /*
185 * Adjust refresh rate depending on SDRAM type
186 * For types > 128 MBit leave it at the current (fast) rate
187 */
188 if (size < 0x02000000) {
189 /* reduce to 15.6 us (62.4 us / quad) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200190 memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
wdenkeee810b2002-10-16 11:27:53 +0000191 udelay (1000);
192 }
193
194 /*
195 * Final mapping
196 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200197 memctl->memc_or1 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
198 memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
wdenkeee810b2002-10-16 11:27:53 +0000199
200 /*
201 * No bank 1
202 *
203 * invalidate bank
204 */
205 memctl->memc_br3 = 0;
206
207 /* adjust refresh rate depending on SDRAM type, one bank */
208 reg = memctl->memc_mptpr;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200209 reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
wdenkeee810b2002-10-16 11:27:53 +0000210 memctl->memc_mptpr = reg;
211
212 udelay (10000);
213
214 return (size);
215}
216
217/* ------------------------------------------------------------------------- */
218
219/*
220 * Check memory range for valid RAM. A simple memory test determines
221 * the actually available RAM size between addresses `base' and
222 * `base + maxsize'. Some (not all) hardware errors are detected:
223 * - short between address lines
224 * - short between data lines
225 */
226
227static long int dram_size (long int mamr_value, long int *base,
228 long int maxsize)
229{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200230 volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
wdenkeee810b2002-10-16 11:27:53 +0000231 volatile memctl8xx_t *memctl = &immap->im_memctl;
wdenkeee810b2002-10-16 11:27:53 +0000232
233 memctl->memc_mamr = mamr_value;
234
wdenkc83bf6a2004-01-06 22:38:14 +0000235 return (get_ram_size(base, maxsize));
wdenkeee810b2002-10-16 11:27:53 +0000236}