blob: 74c8721e1e11d2a9997083b853515358b8cfd233 [file] [log] [blame]
Michal Simekb66d7af2020-12-03 09:31:35 +01001// SPDX-License-Identifier: GPL-2.0
2/*
3 * FB driver for the WiseChip Semiconductor Inc. (UG-6028GDEBF02) display
4 * using the SEPS525 (Syncoam) LCD Controller
5 *
6 * Copyright (C) 2020 Xilinx Inc.
7 */
8
9#include <common.h>
10#include <command.h>
11#include <cpu_func.h>
12#include <dm.h>
13#include <errno.h>
14#include <spi.h>
15#include <video.h>
16#include <asm/gpio.h>
17#include <dm/device_compat.h>
18#include <linux/delay.h>
19
20#define WIDTH 160
21#define HEIGHT 128
22
23#define SEPS525_INDEX 0x00
24#define SEPS525_STATUS_RD 0x01
25#define SEPS525_OSC_CTL 0x02
26#define SEPS525_IREF 0x80
27#define SEPS525_CLOCK_DIV 0x03
28#define SEPS525_REDUCE_CURRENT 0x04
29#define SEPS525_SOFT_RST 0x05
30#define SEPS525_DISP_ONOFF 0x06
31#define SEPS525_PRECHARGE_TIME_R 0x08
32#define SEPS525_PRECHARGE_TIME_G 0x09
33#define SEPS525_PRECHARGE_TIME_B 0x0A
34#define SEPS525_PRECHARGE_CURRENT_R 0x0B
35#define SEPS525_PRECHARGE_CURRENT_G 0x0C
36#define SEPS525_PRECHARGE_CURRENT_B 0x0D
37#define SEPS525_DRIVING_CURRENT_R 0x10
38#define SEPS525_DRIVING_CURRENT_G 0x11
39#define SEPS525_DRIVING_CURRENT_B 0x12
40#define SEPS525_DISPLAYMODE_SET 0x13
41#define SEPS525_RGBIF 0x14
42#define SEPS525_RGB_POL 0x15
43#define SEPS525_MEMORY_WRITEMODE 0x16
44#define SEPS525_MX1_ADDR 0x17
45#define SEPS525_MX2_ADDR 0x18
46#define SEPS525_MY1_ADDR 0x19
47#define SEPS525_MY2_ADDR 0x1A
48#define SEPS525_MEMORY_ACCESS_POINTER_X 0x20
49#define SEPS525_MEMORY_ACCESS_POINTER_Y 0x21
50#define SEPS525_DDRAM_DATA_ACCESS_PORT 0x22
51#define SEPS525_GRAY_SCALE_TABLE_INDEX 0x50
52#define SEPS525_GRAY_SCALE_TABLE_DATA 0x51
53#define SEPS525_DUTY 0x28
54#define SEPS525_DSL 0x29
55#define SEPS525_D1_DDRAM_FAC 0x2E
56#define SEPS525_D1_DDRAM_FAR 0x2F
57#define SEPS525_D2_DDRAM_SAC 0x31
58#define SEPS525_D2_DDRAM_SAR 0x32
59#define SEPS525_SCR1_FX1 0x33
60#define SEPS525_SCR1_FX2 0x34
61#define SEPS525_SCR1_FY1 0x35
62#define SEPS525_SCR1_FY2 0x36
63#define SEPS525_SCR2_SX1 0x37
64#define SEPS525_SCR2_SX2 0x38
65#define SEPS525_SCR2_SY1 0x39
66#define SEPS525_SCR2_SY2 0x3A
67#define SEPS525_SCREEN_SAVER_CONTEROL 0x3B
68#define SEPS525_SS_SLEEP_TIMER 0x3C
69#define SEPS525_SCREEN_SAVER_MODE 0x3D
70#define SEPS525_SS_SCR1_FU 0x3E
71#define SEPS525_SS_SCR1_MXY 0x3F
72#define SEPS525_SS_SCR2_FU 0x40
73#define SEPS525_SS_SCR2_MXY 0x41
74#define SEPS525_MOVING_DIRECTION 0x42
75#define SEPS525_SS_SCR2_SX1 0x47
76#define SEPS525_SS_SCR2_SX2 0x48
77#define SEPS525_SS_SCR2_SY1 0x49
78#define SEPS525_SS_SCR2_SY2 0x4A
79
80/* SEPS525_DISPLAYMODE_SET */
81#define MODE_SWAP_BGR BIT(7)
82#define MODE_SM BIT(6)
83#define MODE_RD BIT(5)
84#define MODE_CD BIT(4)
85
86/**
87 * struct seps525_priv - Private structure
88 * @reset_gpio: Reset gpio pin
89 * @dc_gpio: Data/command control gpio pin
90 * @dev: Device uclass for video_ops
91 */
92struct seps525_priv {
93 struct gpio_desc reset_gpio;
94 struct gpio_desc dc_gpio;
95 struct udevice *dev;
96};
97
98static int seps525_spi_write_cmd(struct udevice *dev, u32 reg)
99{
100 struct seps525_priv *priv = dev_get_priv(dev);
101 u8 buf8 = reg;
102 int ret;
103
104 ret = dm_gpio_set_value(&priv->dc_gpio, 0);
105 if (ret) {
106 dev_dbg(dev, "Failed to handle dc\n");
107 return ret;
108 }
109
110 ret = dm_spi_xfer(dev, 8, &buf8, NULL, SPI_XFER_BEGIN | SPI_XFER_END);
111 if (ret)
112 dev_dbg(dev, "Failed to write command\n");
113
114 return ret;
115}
116
117static int seps525_spi_write_data(struct udevice *dev, u32 val)
118{
119 struct seps525_priv *priv = dev_get_priv(dev);
120 u8 buf8 = val;
121 int ret;
122
123 ret = dm_gpio_set_value(&priv->dc_gpio, 1);
124 if (ret) {
125 dev_dbg(dev, "Failed to handle dc\n");
126 return ret;
127 }
128
129 ret = dm_spi_xfer(dev, 8, &buf8, NULL, SPI_XFER_BEGIN | SPI_XFER_END);
130 if (ret)
131 dev_dbg(dev, "Failed to write data\n");
132
133 return ret;
134}
135
136static void seps525_spi_write(struct udevice *dev, u32 reg, u32 val)
137{
138 (void)seps525_spi_write_cmd(dev, reg);
139 (void)seps525_spi_write_data(dev, val);
140}
141
142static int seps525_display_init(struct udevice *dev)
143{
144 /* Disable Oscillator Power Down */
145 seps525_spi_write(dev, SEPS525_REDUCE_CURRENT, 0x03);
146 mdelay(5);
147
148 /* Set Normal Driving Current */
149 seps525_spi_write(dev, SEPS525_REDUCE_CURRENT, 0x00);
150 mdelay(5);
151
152 seps525_spi_write(dev, SEPS525_SCREEN_SAVER_CONTEROL, 0x00);
153 /* Set EXPORT1 Pin at Internal Clock */
154 seps525_spi_write(dev, SEPS525_OSC_CTL, 0x01);
155 /* Set Clock as 120 Frames/Sec */
156 seps525_spi_write(dev, SEPS525_CLOCK_DIV, 0x90);
157 /* Set Reference Voltage Controlled by External Resister */
158 seps525_spi_write(dev, SEPS525_IREF, 0x01);
159
160 /* precharge time R G B */
161 seps525_spi_write(dev, SEPS525_PRECHARGE_TIME_R, 0x04);
162 seps525_spi_write(dev, SEPS525_PRECHARGE_TIME_G, 0x05);
163 seps525_spi_write(dev, SEPS525_PRECHARGE_TIME_B, 0x05);
164
165 /* precharge current R G B (uA) */
166 seps525_spi_write(dev, SEPS525_PRECHARGE_CURRENT_R, 0x9D);
167 seps525_spi_write(dev, SEPS525_PRECHARGE_CURRENT_G, 0x8C);
168 seps525_spi_write(dev, SEPS525_PRECHARGE_CURRENT_B, 0x57);
169
170 /* driving current R G B (uA) */
171 seps525_spi_write(dev, SEPS525_DRIVING_CURRENT_R, 0x56);
172 seps525_spi_write(dev, SEPS525_DRIVING_CURRENT_G, 0x4D);
173 seps525_spi_write(dev, SEPS525_DRIVING_CURRENT_B, 0x46);
174 /* Set Color Sequence */
175 seps525_spi_write(dev, SEPS525_DISPLAYMODE_SET, 0x00);
176 /* Set MCU Interface Mode */
177 seps525_spi_write(dev, SEPS525_RGBIF, 0x01);
178 /* Set Memory Write Mode */
179 seps525_spi_write(dev, SEPS525_MEMORY_WRITEMODE, 0x66);
180 /* 1/128 Duty (0x0F~0x7F) */
181 seps525_spi_write(dev, SEPS525_DUTY, 0x7F);
182 /* Set Mapping RAM Display Start Line (0x00~0x7F) */
183 seps525_spi_write(dev, SEPS525_DSL, 0x00);
184 /* Display On (0x00/0x01) */
185 seps525_spi_write(dev, SEPS525_DISP_ONOFF, 0x01);
186 /* Set All Internal Register Value as Normal Mode */
187 seps525_spi_write(dev, SEPS525_SOFT_RST, 0x00);
188 /* Set RGB Interface Polarity as Active Low */
189 seps525_spi_write(dev, SEPS525_RGB_POL, 0x00);
190
191 /* Enable access for data */
192 (void)seps525_spi_write_cmd(dev, SEPS525_DDRAM_DATA_ACCESS_PORT);
193
194 return 0;
195}
196
197static int seps525_spi_startup(struct udevice *dev)
198{
199 struct seps525_priv *priv = dev_get_priv(dev);
200 int ret;
201
202 ret = dm_gpio_set_value(&priv->reset_gpio, 1);
203 if (ret)
204 return ret;
205
206 ret = dm_gpio_set_value(&priv->reset_gpio, 0);
207 if (ret)
208 return ret;
209
210 ret = dm_spi_claim_bus(dev);
211 if (ret) {
212 dev_err(dev, "Failed to claim SPI bus: %d\n", ret);
213 return ret;
214 }
215
216 ret = seps525_display_init(dev);
217 if (ret)
218 return ret;
219
220 dm_spi_release_bus(dev);
221
222 return 0;
223}
224
225static int seps525_sync(struct udevice *vid)
226{
227 struct video_priv *uc_priv = dev_get_uclass_priv(vid);
228 struct seps525_priv *priv = dev_get_priv(vid);
229 struct udevice *dev = priv->dev;
230 int i, ret;
231 u8 data1, data2;
232 u8 *start = uc_priv->fb;
233
234 ret = dm_spi_claim_bus(dev);
235 if (ret) {
236 dev_err(dev, "Failed to claim SPI bus: %d\n", ret);
237 return ret;
238 }
239
240 /* start position X,Y */
241 seps525_spi_write(dev, SEPS525_MEMORY_ACCESS_POINTER_X, 0);
242 seps525_spi_write(dev, SEPS525_MEMORY_ACCESS_POINTER_Y, 0);
243
244 /* Enable access for data */
245 (void)seps525_spi_write_cmd(dev, SEPS525_DDRAM_DATA_ACCESS_PORT);
246
247 for (i = 0; i < (uc_priv->xsize * uc_priv->ysize); i++) {
248 data2 = *start++;
249 data1 = *start++;
250 (void)seps525_spi_write_data(dev, data1);
251 (void)seps525_spi_write_data(dev, data2);
252 }
253
254 dm_spi_release_bus(dev);
255
256 return 0;
257}
258
259static int seps525_probe(struct udevice *dev)
260{
261 struct video_priv *uc_priv = dev_get_uclass_priv(dev);
262 struct seps525_priv *priv = dev_get_priv(dev);
263 u32 buswidth;
264 int ret;
265
266 buswidth = dev_read_u32_default(dev, "buswidth", 0);
267 if (buswidth != 8) {
268 dev_err(dev, "Only 8bit buswidth is supported now");
269 return -EINVAL;
270 }
271
272 ret = gpio_request_by_name(dev, "reset-gpios", 0,
273 &priv->reset_gpio, GPIOD_IS_OUT);
274 if (ret) {
275 dev_err(dev, "missing reset GPIO\n");
276 return ret;
277 }
278
279 ret = gpio_request_by_name(dev, "dc-gpios", 0,
280 &priv->dc_gpio, GPIOD_IS_OUT);
281 if (ret) {
282 dev_err(dev, "missing dc GPIO\n");
283 return ret;
284 }
285
286 uc_priv->bpix = VIDEO_BPP16;
287 uc_priv->xsize = WIDTH;
288 uc_priv->ysize = HEIGHT;
289 uc_priv->rot = 0;
290
291 priv->dev = dev;
292
293 ret = seps525_spi_startup(dev);
294 if (ret)
295 return ret;
296
297 return 0;
298}
299
300static int seps525_bind(struct udevice *dev)
301{
Dario Binacchib0db69b2021-01-15 09:10:26 +0100302 struct video_uc_plat *plat = dev_get_uclass_plat(dev);
Michal Simekb66d7af2020-12-03 09:31:35 +0100303
304 plat->size = WIDTH * HEIGHT * 16;
305
306 return 0;
307}
308
309static const struct video_ops seps525_ops = {
310 .video_sync = seps525_sync,
311};
312
313static const struct udevice_id seps525_ids[] = {
314 { .compatible = "syncoam,seps525" },
315 { }
316};
317
318U_BOOT_DRIVER(seps525_video) = {
319 .name = "seps525_video",
320 .id = UCLASS_VIDEO,
321 .of_match = seps525_ids,
322 .ops = &seps525_ops,
Dario Binacchib0db69b2021-01-15 09:10:26 +0100323 .plat_auto = sizeof(struct video_uc_plat),
Michal Simekb66d7af2020-12-03 09:31:35 +0100324 .bind = seps525_bind,
325 .probe = seps525_probe,
Dario Binacchib0db69b2021-01-15 09:10:26 +0100326 .priv_auto = sizeof(struct seps525_priv),
Michal Simekb66d7af2020-12-03 09:31:35 +0100327};