| Fabio Estevam | 4717348 | 2016-02-29 09:33:22 -0300 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2016 NXP Semiconductors |
| 3 | * Author: Fabio Estevam <fabio.estevam@nxp.com> |
| 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | |
| 8 | #include <asm/arch/clock.h> |
| 9 | #include <asm/arch/imx-regs.h> |
| 10 | #include <asm/arch/mx7-pins.h> |
| 11 | #include <asm/arch/sys_proto.h> |
| 12 | #include <asm/gpio.h> |
| 13 | #include <asm/imx-common/iomux-v3.h> |
| 14 | #include <asm/io.h> |
| 15 | #include <common.h> |
| 16 | #include <fsl_esdhc.h> |
| 17 | #include <mmc.h> |
| 18 | #include <asm/arch/crm_regs.h> |
| 19 | #include <usb.h> |
| 20 | |
| 21 | DECLARE_GLOBAL_DATA_PTR; |
| 22 | |
| 23 | #define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU100KOHM | \ |
| 24 | PAD_CTL_HYS) |
| 25 | #define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ |
| 26 | PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) |
| 27 | |
| 28 | int dram_init(void) |
| 29 | { |
| 30 | gd->ram_size = PHYS_SDRAM_SIZE; |
| 31 | |
| 32 | return 0; |
| 33 | } |
| 34 | |
| 35 | static iomux_v3_cfg_t const uart1_pads[] = { |
| 36 | MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), |
| 37 | MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), |
| 38 | }; |
| 39 | |
| 40 | static iomux_v3_cfg_t const usdhc3_pads[] = { |
| 41 | MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| 42 | MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| 43 | MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| 44 | MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| 45 | MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| 46 | MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| 47 | MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| 48 | MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| 49 | MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| 50 | MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| 51 | MX7D_PAD_SD3_RESET_B__SD3_RESET_B | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| 52 | }; |
| 53 | |
| 54 | static void setup_iomux_uart(void) |
| 55 | { |
| 56 | imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); |
| 57 | }; |
| 58 | |
| 59 | static struct fsl_esdhc_cfg usdhc_cfg[1] = { |
| 60 | {USDHC3_BASE_ADDR}, |
| 61 | }; |
| 62 | |
| 63 | int board_mmc_getcd(struct mmc *mmc) |
| 64 | { |
| 65 | /* Assume uSDHC3 emmc is always present */ |
| 66 | return 1; |
| 67 | } |
| 68 | |
| 69 | int board_mmc_init(bd_t *bis) |
| 70 | { |
| 71 | imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); |
| 72 | usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); |
| 73 | |
| 74 | return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); |
| 75 | } |
| 76 | |
| 77 | int board_early_init_f(void) |
| 78 | { |
| 79 | setup_iomux_uart(); |
| 80 | |
| 81 | return 0; |
| 82 | } |
| 83 | |
| 84 | int board_init(void) |
| 85 | { |
| 86 | /* address of boot parameters */ |
| 87 | gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; |
| 88 | |
| 89 | return 0; |
| 90 | } |
| 91 | |
| 92 | int checkboard(void) |
| 93 | { |
| 94 | puts("Board: WARP7\n"); |
| 95 | |
| 96 | return 0; |
| 97 | } |
| 98 | |
| 99 | int board_usb_phy_mode(int port) |
| 100 | { |
| 101 | return USB_INIT_DEVICE; |
| 102 | } |