blob: 4c1c36ea3a5f570990770df6de62c2c2f549452b [file] [log] [blame]
York Sune2b65ea2015-03-20 19:28:24 -07001Overview
2--------
Prabhakar Kushwaha44937212015-11-09 16:42:07 +05303The LS2080A Reference Design (RDB) is a high-performance computing,
Priyanka Jain9ae836c2016-11-17 12:29:55 +05304evaluation, and development platform that supports the QorIQ LS2080A, LS2088A
York Sune2b65ea2015-03-20 19:28:24 -07005Layerscape Architecture processor.
6
Priyanka Jain3049a582017-04-27 15:08:07 +05307The LS2081A Reference Design (RDB) is a high-performance computing,
8evaluation, and development platform that supports the QorIQ LS2081A
9Layerscape Architecture processor.More details in below sections
10
11LS2080A, LS2088A, LS2081A SoC Overview
12--------------------------------------
Priyanka Jain9ae836c2016-11-17 12:29:55 +053013Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A,
Priyanka Jain3049a582017-04-27 15:08:07 +053014LS2081A, LS2088A SoC overview.
York Sune2b65ea2015-03-20 19:28:24 -070015
Prabhakar Kushwaha44937212015-11-09 16:42:07 +053016 LS2080ARDB board Overview
York Sune2b65ea2015-03-20 19:28:24 -070017 -----------------------
18 - SERDES Connections, 16 lanes supporting:
19 - PCI Express - 3.0
20 - SATA 3.0
Vladimir Oltean77b11f72021-09-18 15:32:34 +030021 - 10GBase-R
York Sune2b65ea2015-03-20 19:28:24 -070022 - DDR Controller
23 - Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four
24 chip-selects and two DIMM connectors. Support is up to 2133MT/s.
25 - One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects
26 and two DIMM connectors. Support is up to 1600MT/s.
27 -IFC/Local Bus
28 - IFC rev. 2.0 implementation supporting Little Endian connection scheme.
29 - 128 MB NOR flash 16-bit data bus
30 - One 2 GB NAND flash with ECC support
31 - CPLD connection
32 - USB 3.0
33 - Two high speed USB 3.0 ports
34 - First USB 3.0 port configured as Host with Type-A connector
35 - Second USB 3.0 port configured as OTG with micro-AB connector
36 - SDHC adapter
37 - SD Card Rev 2.0 and Rev 3.0
38 - DSPI
39 - 128 MB high-speed flash Memory for boot code and storage (up to 108MHz)
40 - 4 I2C controllers
41 - Two SATA onboard connectors
42 - UART
43 - ARM JTAG support
44
Priyanka Jain3049a582017-04-27 15:08:07 +053045 LS2081ARDB board Overview
46 -------------------------
47 LS2081ARDB board is similar to LS2080ARDB board
48 with few differences like
49 - Hosts LS2081A SoC
50 - Default boot source is QSPI-boot
51 - Does not have IFC interface
52 - RTC and QSPI flash devices are different
53 - Provides QIXIS access via I2C
54
York Sune2b65ea2015-03-20 19:28:24 -070055Memory map from core's view
56----------------------------
570x00_0000_0000 .. 0x00_000F_FFFF Boot Rom
580x00_0100_0000 .. 0x00_0FFF_FFFF CCSR
590x00_1800_0000 .. 0x00_181F_FFFF OCRAM
Priyanka Jain89a168f2017-04-28 10:41:35 +0530600x00_2000_0000 .. 0x00_2FFF_FFFF QSPI region #1
York Sune2b65ea2015-03-20 19:28:24 -0700610x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1
620x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1
630x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2
640x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2
65
Bin Menga1875592016-02-05 19:30:11 -080066Other addresses are either reserved, or not used directly by U-Boot.
York Sune2b65ea2015-03-20 19:28:24 -070067This list should be updated when more addresses are used.
68
69IFC region map from core's view
70-------------------------------
71During boot i.e. IFC Region #1:-
72 0x30000000 - 0x37ffffff : 128MB : NOR flash
73 0x3C000000 - 0x40000000 : 64MB : CPLD
74
75After relocate to DDR i.e. IFC Region #2:-
76 0x5_1000_0000..0x5_1fff_ffff Memory Hole
77 0x5_2000_0000..0x5_3fff_ffff IFC CSx (CPLD, NAND and others 512MB)
78 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
79 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
80 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
81
82Booting Options
83---------------
84a) NOR boot
85b) NAND boot
Priyanka Jain89a168f2017-04-28 10:41:35 +053086c) QSPI boot
87
Santan Kumarf5bf23d2017-04-28 12:47:24 +053088Memory map for NOR boot
89-------------------------
90Image Flash Offset
91RCW+PBI 0x00000000
92Boot firmware (U-Boot) 0x00100000
93Boot firmware Environment 0x00300000
94PPA firmware 0x00400000
Udit Agarwal76760742017-05-02 17:43:57 +053095Secure Headers 0x00600000
Santan Kumarf5bf23d2017-04-28 12:47:24 +053096Cortina PHY firmware 0x00980000
97DPAA2 MC 0x00A00000
98DPAA2 DPL 0x00D00000
99DPAA2 DPC 0x00E00000
100Kernel.itb 0x01000000
101
Priyanka Jain89a168f2017-04-28 10:41:35 +0530102cfg_rcw_src switches needs to be changed for booting from different option.
103Refer to board documentation for correct switch setting.
104
105QSPI boot details
106===================
107Supported only for
108 LS2088ARDB RevF board with LS2088A SoC.
109
110Images needs to be copied to QSPI flash
111as per memory map given below.
112
113Memory map for QSPI flash
114-------------------------
115Image Flash Offset
116RCW+PBI 0x00000000
117Boot firmware (U-Boot) 0x00100000
118Boot firmware Environment 0x00300000
119PPA firmware 0x00400000
120Cortina PHY firmware 0x00980000
121DPAA2 MC 0x00A00000
122DPAA2 DPL 0x00D00000
123DPAA2 DPC 0x00E00000
124Kernel.itb 0x01000000
Bhupesh Sharmaa2dc8182015-05-28 14:54:10 +0530125
126Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
127-------------------------------------------------------------------
128One needs to use appropriate bootargs to boot Linux flavors which do
129not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
130below:
131
132=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
133 earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
134 hugepages=16 mem=2048M'