blob: 9efab6cdc998ad078438d2813bd4db2431f73728 [file] [log] [blame]
Stefan Roeseae8082c2010-10-19 14:58:02 +02001-------------------
2UBI usage in U-Boot
3-------------------
4
Paul B. Hensoncc63bb02013-05-08 17:08:10 +00005UBI support in U-Boot is broken down into five separate commands.
6The first is the ubi command, which has six subcommands:
Stefan Roeseae8082c2010-10-19 14:58:02 +02007
8=> help ubi
9ubi - ubi commands
10
11Usage:
12ubi part [part] [offset]
13 - Show or set current partition (with optional VID header offset)
14ubi info [l[ayout]] - Display volume and ubi layout information
15ubi create[vol] volume [size] [type] - create volume name with size
16ubi write[vol] address volume size - Write volume from address with size
Paul Burtoncc734f52013-09-04 15:16:59 +010017ubi write.part address volume size [fullsize]
18 - Write part of a volume from address
Stefan Roeseae8082c2010-10-19 14:58:02 +020019ubi read[vol] address volume [size] - Read volume to address with size
20ubi remove[vol] volume - Remove volume
21[Legends]
22 volume: character name
23 size: specified in bytes
24 type: s[tatic] or d[ynamic] (default=dynamic)
25
26
27The first command that is needed to be issues is "ubi part" to connect
28one mtd partition to the UBI subsystem. This command will either create
29a new UBI device on the requested MTD partition. Or it will attach a
30previously created UBI device. The other UBI commands will only work
31when such a UBI device is attached (via "ubi part"). Here an example:
32
33=> mtdparts
34
35device nor0 <1fc000000.nor_flash>, # parts = 6
36 #: name size offset mask_flags
37 0: kernel 0x00200000 0x00000000 0
38 1: dtb 0x00040000 0x00200000 0
39 2: root 0x00200000 0x00240000 0
40 3: user 0x01ac0000 0x00440000 0
41 4: env 0x00080000 0x01f00000 0
42 5: u-boot 0x00080000 0x01f80000 0
43
44active partition: nor0,0 - (kernel) 0x00200000 @ 0x00000000
45
46defaults:
47mtdids : nor0=1fc000000.nor_flash
48mtdparts: mtdparts=1fc000000.nor_flash:2m(kernel),256k(dtb),2m(root),27392k(user),512k(env),512k(u-boot)
49
50=> ubi part root
51Creating 1 MTD partitions on "nor0":
520x000000240000-0x000000440000 : "mtd=2"
53UBI: attaching mtd1 to ubi0
54UBI: physical eraseblock size: 262144 bytes (256 KiB)
55UBI: logical eraseblock size: 262016 bytes
56UBI: smallest flash I/O unit: 1
57UBI: VID header offset: 64 (aligned 64)
58UBI: data offset: 128
59UBI: attached mtd1 to ubi0
60UBI: MTD device name: "mtd=2"
61UBI: MTD device size: 2 MiB
62UBI: number of good PEBs: 8
63UBI: number of bad PEBs: 0
64UBI: max. allowed volumes: 128
65UBI: wear-leveling threshold: 4096
66UBI: number of internal volumes: 1
67UBI: number of user volumes: 1
68UBI: available PEBs: 0
69UBI: total number of reserved PEBs: 8
70UBI: number of PEBs reserved for bad PEB handling: 0
71UBI: max/mean erase counter: 2/1
72
73
74Now that the UBI device is attached, this device can be modified
75using the following commands:
76
77ubi info Display volume and ubi layout information
78ubi createvol Create UBI volume on UBI device
79ubi removevol Remove UBI volume from UBI device
80ubi read Read data from UBI volume to memory
81ubi write Write data from memory to UBI volume
Paul Burtoncc734f52013-09-04 15:16:59 +010082ubi write.part Write data from memory to UBI volume, in parts
Stefan Roeseae8082c2010-10-19 14:58:02 +020083
84
85Here a few examples on the usage:
86
87=> ubi create testvol
88Creating dynamic volume testvol of size 1048064
89
90=> ubi info l
91UBI: volume information dump:
92UBI: vol_id 0
93UBI: reserved_pebs 4
94UBI: alignment 1
95UBI: data_pad 0
96UBI: vol_type 3
97UBI: name_len 7
98UBI: usable_leb_size 262016
99UBI: used_ebs 4
100UBI: used_bytes 1048064
101UBI: last_eb_bytes 262016
102UBI: corrupted 0
103UBI: upd_marker 0
104UBI: name testvol
105
106UBI: volume information dump:
107UBI: vol_id 2147479551
108UBI: reserved_pebs 2
109UBI: alignment 1
110UBI: data_pad 0
111UBI: vol_type 3
112UBI: name_len 13
113UBI: usable_leb_size 262016
114UBI: used_ebs 2
115UBI: used_bytes 524032
116UBI: last_eb_bytes 2
117UBI: corrupted 0
118UBI: upd_marker 0
119UBI: name layout volume
120
121=> ubi info
122UBI: MTD device name: "mtd=2"
123UBI: MTD device size: 2 MiB
124UBI: physical eraseblock size: 262144 bytes (256 KiB)
125UBI: logical eraseblock size: 262016 bytes
126UBI: number of good PEBs: 8
127UBI: number of bad PEBs: 0
128UBI: smallest flash I/O unit: 1
129UBI: VID header offset: 64 (aligned 64)
130UBI: data offset: 128
131UBI: max. allowed volumes: 128
132UBI: wear-leveling threshold: 4096
133UBI: number of internal volumes: 1
134UBI: number of user volumes: 1
135UBI: available PEBs: 0
136UBI: total number of reserved PEBs: 8
137UBI: number of PEBs reserved for bad PEB handling: 0
138UBI: max/mean erase counter: 4/1
139
140=> ubi write 800000 testvol 80000
141Volume "testvol" found at volume id 0
142
143=> ubi read 900000 testvol 80000
144Volume testvol found at volume id 0
145read 524288 bytes from volume 0 to 900000(buf address)
146
147=> cmp.b 800000 900000 80000
148Total of 524288 bytes were the same
Paul B. Hensoncc63bb02013-05-08 17:08:10 +0000149
150
151Next, the ubifsmount command allows you to access filesystems on the
152UBI partition which has been attached with the ubi part command:
153
154=> help ubifsmount
155ubifsmount - mount UBIFS volume
156
157Usage:
158ubifsmount <volume-name>
159 - mount 'volume-name' volume
160
161For example:
162
163=> ubifsmount ubi0:recovery
164UBIFS: mounted UBI device 0, volume 0, name "recovery"
165UBIFS: mounted read-only
166UBIFS: file system size: 46473216 bytes (45384 KiB, 44 MiB, 366 LEBs)
167UBIFS: journal size: 6348800 bytes (6200 KiB, 6 MiB, 50 LEBs)
168UBIFS: media format: w4/r0 (latest is w4/r0)
169UBIFS: default compressor: LZO
170UBIFS: reserved for root: 0 bytes (0 KiB)
171
172Note that unlike Linux, U-Boot can only have one active UBI partition
173at a time, which can be referred to as ubi0, and must be supplied along
174with the name of the filesystem you are mounting.
175
176
177Once a UBI filesystem has been mounted, the ubifsls command allows you
178to list the contents of a directory in the filesystem:
179
180
181=> help ubifsls
182ubifsls - list files in a directory
183
184Usage:
185ubifsls [directory]
186 - list files in a 'directory' (default '/')
187
188For example:
189
190=> ubifsls
Wolfgang Denk93e14592013-10-04 17:43:24 +0200191 17442 Thu Jan 01 02:57:38 1970 imx28-evk.dtb
192 2998146 Thu Jan 01 02:57:43 1970 zImage
Paul B. Hensoncc63bb02013-05-08 17:08:10 +0000193
194
195And the ubifsload command allows you to load a file from a UBI
196filesystem:
197
198
199=> help ubifsload
200ubifsload - load file from an UBIFS filesystem
201
202Usage:
203ubifsload <addr> <filename> [bytes]
204 - load file 'filename' to address 'addr'
205
206For example:
207
208=> ubifsload ${loadaddr} zImage
209Loading file 'zImage' to addr 0x42000000 with size 2998146 (0x002dbf82)...
210Done
211
212
213Finally, you can unmount the UBI filesystem with the ubifsumount
214command:
215
216=> help ubifsumount
217ubifsumount - unmount UBIFS volume
218
219Usage:
220ubifsumount - unmount current volume
221
222For example:
223
224=> ubifsumount
225Unmounting UBIFS volume recovery!