Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2014 Wandboard |
| 4 | * Author: Tungyi Lin <tungyilin1127@gmail.com> |
| 5 | * Richard Hu <hakahu@gmail.com> |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 6 | */ |
| 7 | |
Simon Glass | c3dc39a | 2020-05-10 11:39:55 -0600 | [diff] [blame] | 8 | #include <common.h> |
Simon Glass | 691d719 | 2020-05-10 11:40:02 -0600 | [diff] [blame] | 9 | #include <init.h> |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 10 | #include <asm/arch/clock.h> |
| 11 | #include <asm/arch/imx-regs.h> |
| 12 | #include <asm/arch/iomux.h> |
| 13 | #include <asm/arch/mx6-pins.h> |
Simon Glass | c05ed00 | 2020-05-10 11:40:11 -0600 | [diff] [blame] | 14 | #include <linux/delay.h> |
Masahiro Yamada | 1221ce4 | 2016-09-21 11:28:55 +0900 | [diff] [blame] | 15 | #include <linux/errno.h> |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 16 | #include <asm/gpio.h> |
Stefano Babic | 552a848 | 2017-06-29 10:16:06 +0200 | [diff] [blame] | 17 | #include <asm/mach-imx/iomux-v3.h> |
| 18 | #include <asm/mach-imx/video.h> |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 19 | #include <mmc.h> |
Yangbo Lu | e37ac71 | 2019-06-21 11:42:28 +0800 | [diff] [blame] | 20 | #include <fsl_esdhc_imx.h> |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 21 | #include <asm/arch/crm_regs.h> |
| 22 | #include <asm/io.h> |
| 23 | #include <asm/arch/sys_proto.h> |
| 24 | #include <spl.h> |
| 25 | |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 26 | #include <asm/arch/mx6-ddr.h> |
| 27 | /* |
| 28 | * Driving strength: |
| 29 | * 0x30 == 40 Ohm |
| 30 | * 0x28 == 48 Ohm |
| 31 | */ |
| 32 | |
| 33 | #define IMX6DQ_DRIVE_STRENGTH 0x30 |
| 34 | #define IMX6SDL_DRIVE_STRENGTH 0x28 |
Fabio Estevam | e1f0715 | 2017-10-14 09:17:54 -0300 | [diff] [blame] | 35 | #define IMX6QP_DRIVE_STRENGTH 0x28 |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 36 | |
| 37 | /* configure MX6Q/DUAL mmdc DDR io registers */ |
| 38 | static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { |
| 39 | .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH, |
| 40 | .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH, |
| 41 | .dram_cas = IMX6DQ_DRIVE_STRENGTH, |
| 42 | .dram_ras = IMX6DQ_DRIVE_STRENGTH, |
| 43 | .dram_reset = IMX6DQ_DRIVE_STRENGTH, |
| 44 | .dram_sdcke0 = IMX6DQ_DRIVE_STRENGTH, |
| 45 | .dram_sdcke1 = IMX6DQ_DRIVE_STRENGTH, |
| 46 | .dram_sdba2 = 0x00000000, |
| 47 | .dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH, |
| 48 | .dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH, |
| 49 | .dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH, |
| 50 | .dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH, |
| 51 | .dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH, |
| 52 | .dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH, |
| 53 | .dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH, |
| 54 | .dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH, |
| 55 | .dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH, |
| 56 | .dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH, |
| 57 | .dram_dqm0 = IMX6DQ_DRIVE_STRENGTH, |
| 58 | .dram_dqm1 = IMX6DQ_DRIVE_STRENGTH, |
| 59 | .dram_dqm2 = IMX6DQ_DRIVE_STRENGTH, |
| 60 | .dram_dqm3 = IMX6DQ_DRIVE_STRENGTH, |
| 61 | .dram_dqm4 = IMX6DQ_DRIVE_STRENGTH, |
| 62 | .dram_dqm5 = IMX6DQ_DRIVE_STRENGTH, |
| 63 | .dram_dqm6 = IMX6DQ_DRIVE_STRENGTH, |
| 64 | .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH, |
| 65 | }; |
| 66 | |
Fabio Estevam | e1f0715 | 2017-10-14 09:17:54 -0300 | [diff] [blame] | 67 | /* configure MX6QP mmdc DDR io registers */ |
| 68 | static struct mx6dq_iomux_ddr_regs mx6qp_ddr_ioregs = { |
| 69 | .dram_sdclk_0 = IMX6QP_DRIVE_STRENGTH, |
| 70 | .dram_sdclk_1 = IMX6QP_DRIVE_STRENGTH, |
| 71 | .dram_cas = IMX6QP_DRIVE_STRENGTH, |
| 72 | .dram_ras = IMX6QP_DRIVE_STRENGTH, |
| 73 | .dram_reset = IMX6QP_DRIVE_STRENGTH, |
| 74 | .dram_sdcke0 = IMX6QP_DRIVE_STRENGTH, |
| 75 | .dram_sdcke1 = IMX6QP_DRIVE_STRENGTH, |
| 76 | .dram_sdba2 = 0x00000000, |
| 77 | .dram_sdodt0 = IMX6QP_DRIVE_STRENGTH, |
| 78 | .dram_sdodt1 = IMX6QP_DRIVE_STRENGTH, |
| 79 | .dram_sdqs0 = IMX6QP_DRIVE_STRENGTH, |
| 80 | .dram_sdqs1 = IMX6QP_DRIVE_STRENGTH, |
| 81 | .dram_sdqs2 = IMX6QP_DRIVE_STRENGTH, |
| 82 | .dram_sdqs3 = IMX6QP_DRIVE_STRENGTH, |
| 83 | .dram_sdqs4 = IMX6QP_DRIVE_STRENGTH, |
| 84 | .dram_sdqs5 = IMX6QP_DRIVE_STRENGTH, |
| 85 | .dram_sdqs6 = IMX6QP_DRIVE_STRENGTH, |
| 86 | .dram_sdqs7 = IMX6QP_DRIVE_STRENGTH, |
| 87 | .dram_dqm0 = IMX6QP_DRIVE_STRENGTH, |
| 88 | .dram_dqm1 = IMX6QP_DRIVE_STRENGTH, |
| 89 | .dram_dqm2 = IMX6QP_DRIVE_STRENGTH, |
| 90 | .dram_dqm3 = IMX6QP_DRIVE_STRENGTH, |
| 91 | .dram_dqm4 = IMX6QP_DRIVE_STRENGTH, |
| 92 | .dram_dqm5 = IMX6QP_DRIVE_STRENGTH, |
| 93 | .dram_dqm6 = IMX6QP_DRIVE_STRENGTH, |
| 94 | .dram_dqm7 = IMX6QP_DRIVE_STRENGTH, |
| 95 | }; |
| 96 | |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 97 | /* configure MX6Q/DUAL mmdc GRP io registers */ |
| 98 | static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { |
| 99 | .grp_ddr_type = 0x000c0000, |
| 100 | .grp_ddrmode_ctl = 0x00020000, |
| 101 | .grp_ddrpke = 0x00000000, |
| 102 | .grp_addds = IMX6DQ_DRIVE_STRENGTH, |
| 103 | .grp_ctlds = IMX6DQ_DRIVE_STRENGTH, |
| 104 | .grp_ddrmode = 0x00020000, |
| 105 | .grp_b0ds = IMX6DQ_DRIVE_STRENGTH, |
| 106 | .grp_b1ds = IMX6DQ_DRIVE_STRENGTH, |
| 107 | .grp_b2ds = IMX6DQ_DRIVE_STRENGTH, |
| 108 | .grp_b3ds = IMX6DQ_DRIVE_STRENGTH, |
| 109 | .grp_b4ds = IMX6DQ_DRIVE_STRENGTH, |
| 110 | .grp_b5ds = IMX6DQ_DRIVE_STRENGTH, |
| 111 | .grp_b6ds = IMX6DQ_DRIVE_STRENGTH, |
| 112 | .grp_b7ds = IMX6DQ_DRIVE_STRENGTH, |
| 113 | }; |
| 114 | |
Fabio Estevam | e1f0715 | 2017-10-14 09:17:54 -0300 | [diff] [blame] | 115 | /* configure MX6QP mmdc GRP io registers */ |
| 116 | static struct mx6dq_iomux_grp_regs mx6qp_grp_ioregs = { |
| 117 | .grp_ddr_type = 0x000c0000, |
| 118 | .grp_ddrmode_ctl = 0x00020000, |
| 119 | .grp_ddrpke = 0x00000000, |
| 120 | .grp_addds = IMX6QP_DRIVE_STRENGTH, |
| 121 | .grp_ctlds = IMX6QP_DRIVE_STRENGTH, |
| 122 | .grp_ddrmode = 0x00020000, |
| 123 | .grp_b0ds = IMX6QP_DRIVE_STRENGTH, |
| 124 | .grp_b1ds = IMX6QP_DRIVE_STRENGTH, |
| 125 | .grp_b2ds = IMX6QP_DRIVE_STRENGTH, |
| 126 | .grp_b3ds = IMX6QP_DRIVE_STRENGTH, |
| 127 | .grp_b4ds = IMX6QP_DRIVE_STRENGTH, |
| 128 | .grp_b5ds = IMX6QP_DRIVE_STRENGTH, |
| 129 | .grp_b6ds = IMX6QP_DRIVE_STRENGTH, |
| 130 | .grp_b7ds = IMX6QP_DRIVE_STRENGTH, |
| 131 | }; |
| 132 | |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 133 | /* configure MX6SOLO/DUALLITE mmdc DDR io registers */ |
| 134 | struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = { |
| 135 | .dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH, |
| 136 | .dram_sdclk_1 = IMX6SDL_DRIVE_STRENGTH, |
| 137 | .dram_cas = IMX6SDL_DRIVE_STRENGTH, |
| 138 | .dram_ras = IMX6SDL_DRIVE_STRENGTH, |
| 139 | .dram_reset = IMX6SDL_DRIVE_STRENGTH, |
| 140 | .dram_sdcke0 = IMX6SDL_DRIVE_STRENGTH, |
| 141 | .dram_sdcke1 = IMX6SDL_DRIVE_STRENGTH, |
| 142 | .dram_sdba2 = 0x00000000, |
| 143 | .dram_sdodt0 = IMX6SDL_DRIVE_STRENGTH, |
| 144 | .dram_sdodt1 = IMX6SDL_DRIVE_STRENGTH, |
| 145 | .dram_sdqs0 = IMX6SDL_DRIVE_STRENGTH, |
| 146 | .dram_sdqs1 = IMX6SDL_DRIVE_STRENGTH, |
| 147 | .dram_sdqs2 = IMX6SDL_DRIVE_STRENGTH, |
| 148 | .dram_sdqs3 = IMX6SDL_DRIVE_STRENGTH, |
| 149 | .dram_sdqs4 = IMX6SDL_DRIVE_STRENGTH, |
| 150 | .dram_sdqs5 = IMX6SDL_DRIVE_STRENGTH, |
| 151 | .dram_sdqs6 = IMX6SDL_DRIVE_STRENGTH, |
| 152 | .dram_sdqs7 = IMX6SDL_DRIVE_STRENGTH, |
| 153 | .dram_dqm0 = IMX6SDL_DRIVE_STRENGTH, |
| 154 | .dram_dqm1 = IMX6SDL_DRIVE_STRENGTH, |
| 155 | .dram_dqm2 = IMX6SDL_DRIVE_STRENGTH, |
| 156 | .dram_dqm3 = IMX6SDL_DRIVE_STRENGTH, |
| 157 | .dram_dqm4 = IMX6SDL_DRIVE_STRENGTH, |
| 158 | .dram_dqm5 = IMX6SDL_DRIVE_STRENGTH, |
| 159 | .dram_dqm6 = IMX6SDL_DRIVE_STRENGTH, |
| 160 | .dram_dqm7 = IMX6SDL_DRIVE_STRENGTH, |
| 161 | }; |
| 162 | |
| 163 | /* configure MX6SOLO/DUALLITE mmdc GRP io registers */ |
| 164 | struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = { |
| 165 | .grp_ddr_type = 0x000c0000, |
| 166 | .grp_ddrmode_ctl = 0x00020000, |
| 167 | .grp_ddrpke = 0x00000000, |
| 168 | .grp_addds = IMX6SDL_DRIVE_STRENGTH, |
| 169 | .grp_ctlds = IMX6SDL_DRIVE_STRENGTH, |
| 170 | .grp_ddrmode = 0x00020000, |
| 171 | .grp_b0ds = IMX6SDL_DRIVE_STRENGTH, |
| 172 | .grp_b1ds = IMX6SDL_DRIVE_STRENGTH, |
| 173 | .grp_b2ds = IMX6SDL_DRIVE_STRENGTH, |
| 174 | .grp_b3ds = IMX6SDL_DRIVE_STRENGTH, |
| 175 | .grp_b4ds = IMX6SDL_DRIVE_STRENGTH, |
| 176 | .grp_b5ds = IMX6SDL_DRIVE_STRENGTH, |
| 177 | .grp_b6ds = IMX6SDL_DRIVE_STRENGTH, |
| 178 | .grp_b7ds = IMX6SDL_DRIVE_STRENGTH, |
| 179 | }; |
| 180 | |
| 181 | /* H5T04G63AFR-PB */ |
| 182 | static struct mx6_ddr3_cfg h5t04g63afr = { |
| 183 | .mem_speed = 1600, |
| 184 | .density = 4, |
| 185 | .width = 16, |
| 186 | .banks = 8, |
| 187 | .rowaddr = 15, |
| 188 | .coladdr = 10, |
| 189 | .pagesz = 2, |
| 190 | .trcd = 1375, |
| 191 | .trcmin = 4875, |
| 192 | .trasmin = 3500, |
| 193 | }; |
| 194 | |
| 195 | /* H5TQ2G63DFR-H9 */ |
| 196 | static struct mx6_ddr3_cfg h5tq2g63dfr = { |
| 197 | .mem_speed = 1333, |
| 198 | .density = 2, |
| 199 | .width = 16, |
| 200 | .banks = 8, |
| 201 | .rowaddr = 14, |
| 202 | .coladdr = 10, |
| 203 | .pagesz = 2, |
| 204 | .trcd = 1350, |
| 205 | .trcmin = 4950, |
| 206 | .trasmin = 3600, |
| 207 | }; |
| 208 | |
| 209 | static struct mx6_mmdc_calibration mx6q_2g_mmdc_calib = { |
| 210 | .p0_mpwldectrl0 = 0x001f001f, |
| 211 | .p0_mpwldectrl1 = 0x001f001f, |
| 212 | .p1_mpwldectrl0 = 0x001f001f, |
| 213 | .p1_mpwldectrl1 = 0x001f001f, |
| 214 | .p0_mpdgctrl0 = 0x4301030d, |
| 215 | .p0_mpdgctrl1 = 0x03020277, |
| 216 | .p1_mpdgctrl0 = 0x4300030a, |
| 217 | .p1_mpdgctrl1 = 0x02780248, |
| 218 | .p0_mprddlctl = 0x4536393b, |
| 219 | .p1_mprddlctl = 0x36353441, |
| 220 | .p0_mpwrdlctl = 0x41414743, |
| 221 | .p1_mpwrdlctl = 0x462f453f, |
| 222 | }; |
| 223 | |
| 224 | /* DDR 64bit 2GB */ |
| 225 | static struct mx6_ddr_sysinfo mem_q = { |
| 226 | .dsize = 2, |
| 227 | .cs1_mirror = 0, |
| 228 | /* config for full 4GB range so that get_mem_size() works */ |
| 229 | .cs_density = 32, |
| 230 | .ncs = 1, |
| 231 | .bi_on = 1, |
| 232 | .rtt_nom = 1, |
| 233 | .rtt_wr = 0, |
| 234 | .ralat = 5, |
| 235 | .walat = 0, |
| 236 | .mif3_mode = 3, |
| 237 | .rst_to_cke = 0x23, |
| 238 | .sde_to_rst = 0x10, |
Fabio Estevam | edf0093 | 2016-08-29 20:37:15 -0300 | [diff] [blame] | 239 | .refsel = 1, /* Refresh cycles at 32KHz */ |
Fabio Estevam | ba4e159 | 2016-09-12 11:38:36 -0300 | [diff] [blame] | 240 | .refr = 3, /* 4 refresh commands per refresh cycle */ |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 241 | }; |
| 242 | |
| 243 | static struct mx6_mmdc_calibration mx6dl_1g_mmdc_calib = { |
| 244 | .p0_mpwldectrl0 = 0x001f001f, |
| 245 | .p0_mpwldectrl1 = 0x001f001f, |
| 246 | .p1_mpwldectrl0 = 0x001f001f, |
| 247 | .p1_mpwldectrl1 = 0x001f001f, |
| 248 | .p0_mpdgctrl0 = 0x420e020e, |
| 249 | .p0_mpdgctrl1 = 0x02000200, |
| 250 | .p1_mpdgctrl0 = 0x42020202, |
| 251 | .p1_mpdgctrl1 = 0x01720172, |
| 252 | .p0_mprddlctl = 0x494c4f4c, |
| 253 | .p1_mprddlctl = 0x4a4c4c49, |
| 254 | .p0_mpwrdlctl = 0x3f3f3133, |
| 255 | .p1_mpwrdlctl = 0x39373f2e, |
| 256 | }; |
| 257 | |
| 258 | static struct mx6_mmdc_calibration mx6s_512m_mmdc_calib = { |
| 259 | .p0_mpwldectrl0 = 0x0040003c, |
| 260 | .p0_mpwldectrl1 = 0x0032003e, |
| 261 | .p0_mpdgctrl0 = 0x42350231, |
| 262 | .p0_mpdgctrl1 = 0x021a0218, |
| 263 | .p0_mprddlctl = 0x4b4b4e49, |
| 264 | .p0_mpwrdlctl = 0x3f3f3035, |
| 265 | }; |
| 266 | |
| 267 | /* DDR 64bit 1GB */ |
| 268 | static struct mx6_ddr_sysinfo mem_dl = { |
| 269 | .dsize = 2, |
| 270 | .cs1_mirror = 0, |
| 271 | /* config for full 4GB range so that get_mem_size() works */ |
| 272 | .cs_density = 32, |
| 273 | .ncs = 1, |
| 274 | .bi_on = 1, |
| 275 | .rtt_nom = 1, |
| 276 | .rtt_wr = 0, |
| 277 | .ralat = 5, |
| 278 | .walat = 0, |
| 279 | .mif3_mode = 3, |
| 280 | .rst_to_cke = 0x23, |
| 281 | .sde_to_rst = 0x10, |
Fabio Estevam | edf0093 | 2016-08-29 20:37:15 -0300 | [diff] [blame] | 282 | .refsel = 1, /* Refresh cycles at 32KHz */ |
Fabio Estevam | ba4e159 | 2016-09-12 11:38:36 -0300 | [diff] [blame] | 283 | .refr = 3, /* 4 refresh commands per refresh cycle */ |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 284 | }; |
| 285 | |
| 286 | /* DDR 32bit 512MB */ |
| 287 | static struct mx6_ddr_sysinfo mem_s = { |
| 288 | .dsize = 1, |
| 289 | .cs1_mirror = 0, |
| 290 | /* config for full 4GB range so that get_mem_size() works */ |
| 291 | .cs_density = 32, |
| 292 | .ncs = 1, |
| 293 | .bi_on = 1, |
| 294 | .rtt_nom = 1, |
| 295 | .rtt_wr = 0, |
| 296 | .ralat = 5, |
| 297 | .walat = 0, |
| 298 | .mif3_mode = 3, |
| 299 | .rst_to_cke = 0x23, |
| 300 | .sde_to_rst = 0x10, |
Fabio Estevam | edf0093 | 2016-08-29 20:37:15 -0300 | [diff] [blame] | 301 | .refsel = 1, /* Refresh cycles at 32KHz */ |
Fabio Estevam | ba4e159 | 2016-09-12 11:38:36 -0300 | [diff] [blame] | 302 | .refr = 3, /* 4 refresh commands per refresh cycle */ |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 303 | }; |
| 304 | |
| 305 | static void ccgr_init(void) |
| 306 | { |
| 307 | struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; |
| 308 | |
| 309 | writel(0x00C03F3F, &ccm->CCGR0); |
| 310 | writel(0x0030FC03, &ccm->CCGR1); |
| 311 | writel(0x0FFFC000, &ccm->CCGR2); |
Fabio Estevam | e1f0715 | 2017-10-14 09:17:54 -0300 | [diff] [blame] | 312 | writel(0x3FF03000, &ccm->CCGR3); |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 313 | writel(0x00FFF300, &ccm->CCGR4); |
| 314 | writel(0x0F0000C3, &ccm->CCGR5); |
| 315 | writel(0x000003FF, &ccm->CCGR6); |
| 316 | } |
| 317 | |
Fabio Estevam | e1f0715 | 2017-10-14 09:17:54 -0300 | [diff] [blame] | 318 | static void spl_dram_init_imx6qp_lpddr3(void) |
| 319 | { |
| 320 | /* MMDC0_MDSCR set the Configuration request bit during MMDC set up */ |
| 321 | writel(0x00008000, MMDC_P0_BASE_ADDR + 0x01c); |
| 322 | /* Calibrations - ZQ */ |
| 323 | writel(0xa1390003, MMDC_P0_BASE_ADDR + 0x800); |
| 324 | /* write leveling */ |
| 325 | writel(0x00060004, MMDC_P0_BASE_ADDR + 0x80c); |
| 326 | writel(0x000B0004, MMDC_P0_BASE_ADDR + 0x810); |
| 327 | writel(0x00000004, MMDC_P1_BASE_ADDR + 0x80c); |
| 328 | writel(0x00000000, MMDC_P1_BASE_ADDR + 0x810); |
| 329 | /* |
| 330 | * DQS gating, read delay, write delay calibration values |
| 331 | * based on calibration compare of 0x00ffff00 |
| 332 | */ |
| 333 | writel(0x03040314, MMDC_P0_BASE_ADDR + 0x83c); |
| 334 | writel(0x03080300, MMDC_P0_BASE_ADDR + 0x840); |
| 335 | writel(0x03000310, MMDC_P1_BASE_ADDR + 0x83c); |
| 336 | writel(0x0268023C, MMDC_P1_BASE_ADDR + 0x840); |
| 337 | writel(0x4034363A, MMDC_P0_BASE_ADDR + 0x848); |
| 338 | writel(0x36302C3C, MMDC_P1_BASE_ADDR + 0x848); |
| 339 | writel(0x3E3E4046, MMDC_P0_BASE_ADDR + 0x850); |
| 340 | writel(0x483A4844, MMDC_P1_BASE_ADDR + 0x850); |
| 341 | writel(0x33333333, MMDC_P0_BASE_ADDR + 0x81c); |
| 342 | writel(0x33333333, MMDC_P0_BASE_ADDR + 0x820); |
| 343 | writel(0x33333333, MMDC_P0_BASE_ADDR + 0x824); |
| 344 | writel(0x33333333, MMDC_P0_BASE_ADDR + 0x828); |
| 345 | writel(0x33333333, MMDC_P1_BASE_ADDR + 0x81c); |
| 346 | writel(0x33333333, MMDC_P1_BASE_ADDR + 0x820); |
| 347 | writel(0x33333333, MMDC_P1_BASE_ADDR + 0x824); |
| 348 | writel(0x33333333, MMDC_P1_BASE_ADDR + 0x828); |
| 349 | writel(0x24912489, MMDC_P0_BASE_ADDR + 0x8c0); |
| 350 | writel(0x24914452, MMDC_P1_BASE_ADDR + 0x8c0); |
| 351 | writel(0x00000800, MMDC_P0_BASE_ADDR + 0x8b8); |
| 352 | writel(0x00000800, MMDC_P1_BASE_ADDR + 0x8b8); |
| 353 | /* MMDC init: in DDR3, 64-bit mode, only MMDC0 is initiated */ |
| 354 | writel(0x00020036, MMDC_P0_BASE_ADDR + 0x004); |
| 355 | writel(0x09444040, MMDC_P0_BASE_ADDR + 0x008); |
| 356 | writel(0x898E79A4, MMDC_P0_BASE_ADDR + 0x00c); |
| 357 | writel(0xDB538F64, MMDC_P0_BASE_ADDR + 0x010); |
| 358 | writel(0x01FF00DD, MMDC_P0_BASE_ADDR + 0x014); |
| 359 | writel(0x00011740, MMDC_P0_BASE_ADDR + 0x018); |
| 360 | writel(0x00008000, MMDC_P0_BASE_ADDR + 0x01c); |
| 361 | writel(0x000026D2, MMDC_P0_BASE_ADDR + 0x02c); |
| 362 | writel(0x008E1023, MMDC_P0_BASE_ADDR + 0x030); |
| 363 | writel(0x00000047, MMDC_P0_BASE_ADDR + 0x040); |
| 364 | writel(0x14420000, MMDC_P0_BASE_ADDR + 0x400); |
| 365 | writel(0x841A0000, MMDC_P0_BASE_ADDR + 0x000); |
| 366 | writel(0x00400c58, MMDC_P0_BASE_ADDR + 0x890); |
| 367 | /* add NOC DDR configuration */ |
| 368 | writel(0x00000000, NOC_DDR_BASE_ADDR + 0x008); |
| 369 | writel(0x2871C39B, NOC_DDR_BASE_ADDR + 0x00c); |
| 370 | writel(0x000005B4, NOC_DDR_BASE_ADDR + 0x038); |
| 371 | writel(0x00000040, NOC_DDR_BASE_ADDR + 0x014); |
| 372 | writel(0x00000020, NOC_DDR_BASE_ADDR + 0x028); |
| 373 | writel(0x00000020, NOC_DDR_BASE_ADDR + 0x02c); |
| 374 | writel(0x02088032, MMDC_P0_BASE_ADDR + 0x01c); |
| 375 | writel(0x00008033, MMDC_P0_BASE_ADDR + 0x01c); |
| 376 | writel(0x00048031, MMDC_P0_BASE_ADDR + 0x01c); |
| 377 | writel(0x19308030, MMDC_P0_BASE_ADDR + 0x01c); |
| 378 | writel(0x04008040, MMDC_P0_BASE_ADDR + 0x01c); |
| 379 | writel(0x00007800, MMDC_P0_BASE_ADDR + 0x020); |
| 380 | writel(0x00022227, MMDC_P0_BASE_ADDR + 0x818); |
| 381 | writel(0x00022227, MMDC_P1_BASE_ADDR + 0x818); |
| 382 | writel(0x00025576, MMDC_P0_BASE_ADDR + 0x004); |
| 383 | writel(0x00011006, MMDC_P0_BASE_ADDR + 0x404); |
| 384 | writel(0x00000000, MMDC_P0_BASE_ADDR + 0x01c); |
| 385 | } |
| 386 | |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 387 | static void spl_dram_init(void) |
| 388 | { |
Fabio Estevam | e1f0715 | 2017-10-14 09:17:54 -0300 | [diff] [blame] | 389 | if (is_mx6dqp()) { |
| 390 | mx6dq_dram_iocfg(64, &mx6qp_ddr_ioregs, &mx6qp_grp_ioregs); |
| 391 | spl_dram_init_imx6qp_lpddr3(); |
| 392 | } else if (is_cpu_type(MXC_CPU_MX6SOLO)) { |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 393 | mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs); |
| 394 | mx6_dram_cfg(&mem_s, &mx6s_512m_mmdc_calib, &h5tq2g63dfr); |
| 395 | } else if (is_cpu_type(MXC_CPU_MX6DL)) { |
| 396 | mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs); |
| 397 | mx6_dram_cfg(&mem_dl, &mx6dl_1g_mmdc_calib, &h5tq2g63dfr); |
| 398 | } else if (is_cpu_type(MXC_CPU_MX6Q)) { |
| 399 | mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs); |
| 400 | mx6_dram_cfg(&mem_q, &mx6q_2g_mmdc_calib, &h5t04g63afr); |
| 401 | } |
Fabio Estevam | 401cabc | 2017-11-19 12:21:44 -0200 | [diff] [blame] | 402 | |
| 403 | udelay(100); |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 404 | } |
| 405 | |
| 406 | void board_init_f(ulong dummy) |
| 407 | { |
| 408 | ccgr_init(); |
| 409 | |
| 410 | /* setup AIPS and disable watchdog */ |
| 411 | arch_cpu_init(); |
| 412 | |
| 413 | gpr_init(); |
| 414 | |
| 415 | /* iomux */ |
| 416 | board_early_init_f(); |
| 417 | |
| 418 | /* setup GP timer */ |
| 419 | timer_init(); |
| 420 | |
| 421 | /* UART clocks enabled and gd valid - init serial console */ |
| 422 | preloader_console_init(); |
| 423 | |
| 424 | /* DDR initialization */ |
| 425 | spl_dram_init(); |
Fabio Estevam | 0d1ea05 | 2015-05-11 20:50:22 -0300 | [diff] [blame] | 426 | } |
Anatolij Gustschin | 2cbf1b3 | 2019-03-18 23:29:47 +0100 | [diff] [blame] | 427 | |
| 428 | #define USDHC1_CD_GPIO IMX_GPIO_NR(1, 2) |
| 429 | #define USDHC3_CD_GPIO IMX_GPIO_NR(3, 9) |
| 430 | |
| 431 | #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ |
| 432 | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ |
| 433 | PAD_CTL_SRE_FAST | PAD_CTL_HYS) |
| 434 | |
| 435 | static struct fsl_esdhc_cfg usdhc_cfg[2] = { |
| 436 | {USDHC3_BASE_ADDR}, |
| 437 | {USDHC1_BASE_ADDR}, |
| 438 | }; |
| 439 | |
| 440 | static iomux_v3_cfg_t const usdhc1_pads[] = { |
| 441 | IOMUX_PADS(PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 442 | IOMUX_PADS(PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 443 | IOMUX_PADS(PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 444 | IOMUX_PADS(PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 445 | IOMUX_PADS(PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 446 | IOMUX_PADS(PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 447 | /* Carrier MicroSD Card Detect */ |
| 448 | IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)), |
| 449 | }; |
| 450 | |
| 451 | static iomux_v3_cfg_t const usdhc3_pads[] = { |
| 452 | IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 453 | IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 454 | IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 455 | IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 456 | IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 457 | IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 458 | /* SOM MicroSD Card Detect */ |
| 459 | IOMUX_PADS(PAD_EIM_DA9__GPIO3_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)), |
| 460 | }; |
| 461 | |
| 462 | int board_mmc_getcd(struct mmc *mmc) |
| 463 | { |
| 464 | struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; |
| 465 | int ret = 0; |
| 466 | |
| 467 | switch (cfg->esdhc_base) { |
| 468 | case USDHC1_BASE_ADDR: |
| 469 | ret = !gpio_get_value(USDHC1_CD_GPIO); |
| 470 | break; |
| 471 | case USDHC3_BASE_ADDR: |
| 472 | ret = !gpio_get_value(USDHC3_CD_GPIO); |
| 473 | break; |
| 474 | } |
| 475 | |
| 476 | return ret; |
| 477 | } |
| 478 | |
Masahiro Yamada | b75d8dc | 2020-06-26 15:13:33 +0900 | [diff] [blame] | 479 | int board_mmc_init(struct bd_info *bis) |
Anatolij Gustschin | 2cbf1b3 | 2019-03-18 23:29:47 +0100 | [diff] [blame] | 480 | { |
| 481 | int ret; |
| 482 | u32 index = 0; |
| 483 | |
| 484 | /* |
| 485 | * Following map is done: |
| 486 | * (U-Boot device node) (Physical Port) |
| 487 | * mmc0 SOM MicroSD |
| 488 | * mmc1 Carrier board MicroSD |
| 489 | */ |
Tom Rini | 6cc0454 | 2022-10-28 20:27:13 -0400 | [diff] [blame] | 490 | for (index = 0; index < CFG_SYS_FSL_USDHC_NUM; ++index) { |
Anatolij Gustschin | 2cbf1b3 | 2019-03-18 23:29:47 +0100 | [diff] [blame] | 491 | switch (index) { |
| 492 | case 0: |
| 493 | SETUP_IOMUX_PADS(usdhc3_pads); |
| 494 | usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); |
| 495 | usdhc_cfg[0].max_bus_width = 4; |
| 496 | gpio_direction_input(USDHC3_CD_GPIO); |
| 497 | break; |
| 498 | case 1: |
| 499 | SETUP_IOMUX_PADS(usdhc1_pads); |
| 500 | usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); |
| 501 | usdhc_cfg[1].max_bus_width = 4; |
| 502 | gpio_direction_input(USDHC1_CD_GPIO); |
| 503 | break; |
| 504 | default: |
| 505 | printf("Warning: you configured more USDHC controllers" |
| 506 | "(%d) then supported by the board (%d)\n", |
Tom Rini | 6cc0454 | 2022-10-28 20:27:13 -0400 | [diff] [blame] | 507 | index + 1, CFG_SYS_FSL_USDHC_NUM); |
Anatolij Gustschin | 2cbf1b3 | 2019-03-18 23:29:47 +0100 | [diff] [blame] | 508 | return -EINVAL; |
| 509 | } |
| 510 | |
| 511 | ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]); |
| 512 | if (ret) |
| 513 | return ret; |
| 514 | } |
| 515 | |
| 516 | return 0; |
| 517 | } |