blob: 1376d6155deca5cc0b84d924900acdbfd8c774eb [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Peter Griffin11ac2362015-07-30 18:55:23 +01002/*
3 * (C) Copyright 2015 Linaro
4 *
5 * Peter Griffin <peter.griffin@linaro.org>
6 *
7 * Configuration for HiKey 96boards CE. Parts were derived from other ARM
8 * configurations.
Peter Griffin11ac2362015-07-30 18:55:23 +01009 */
10
11#ifndef __HIKEY_H
12#define __HIKEY_H
13
Peter Griffinc9a67d22015-09-10 21:55:13 +010014#include <linux/sizes.h>
15
Peter Griffin11ac2362015-07-30 18:55:23 +010016#define CONFIG_POWER
17#define CONFIG_POWER_HI6553
18
19#define CONFIG_REMAKE_ELF
20
Peter Griffin11ac2362015-07-30 18:55:23 +010021/* Physical Memory Map */
22
23/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
Peter Griffin11ac2362015-07-30 18:55:23 +010024
Peter Griffin11ac2362015-07-30 18:55:23 +010025#define PHYS_SDRAM_1 0x00000000
26
27/* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
Peter Griffin05e682d2015-09-10 21:55:18 +010028#define PHYS_SDRAM_1_SIZE 0x3EFFFFFF
29
Peter Griffin11ac2362015-07-30 18:55:23 +010030#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
31
32#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
33
34#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
35
36#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
37
38/* Generic Timer Definitions */
39#define COUNTER_FREQUENCY 19000000
40
41/* Generic Interrupt Controller Definitions */
42#define GICD_BASE 0xf6801000
43#define GICC_BASE 0xf6802000
44
45/* Size of malloc() pool */
Peter Griffinc9a67d22015-09-10 21:55:13 +010046#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
Peter Griffin11ac2362015-07-30 18:55:23 +010047
Peter Griffin11ac2362015-07-30 18:55:23 +010048#ifdef CONFIG_CMD_USB
Peter Griffin11ac2362015-07-30 18:55:23 +010049#define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
50/*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
51#define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
Peter Griffin11ac2362015-07-30 18:55:23 +010052#endif
53
54#define CONFIG_HIKEY_GPIO
Peter Griffin11ac2362015-07-30 18:55:23 +010055
56/* SD/MMC configuration */
Peter Griffin11ac2362015-07-30 18:55:23 +010057#define CONFIG_BOUNCE_BUFFER
Peter Griffin11ac2362015-07-30 18:55:23 +010058
Peter Griffin11ac2362015-07-30 18:55:23 +010059/* Command line configuration */
Peter Griffin11ac2362015-07-30 18:55:23 +010060
Peter Griffin11ac2362015-07-30 18:55:23 +010061/* BOOTP options */
62#define CONFIG_BOOTP_BOOTFILESIZE
63
Peter Griffin11ac2362015-07-30 18:55:23 +010064/* Initial environment variables */
65
66/*
67 * Defines where the kernel and FDT will be put in RAM
68 */
69
Peter Griffin11ac2362015-07-30 18:55:23 +010070#define BOOT_TARGET_DEVICES(func) \
71 func(USB, usb, 0) \
72 func(MMC, mmc, 1) \
73 func(DHCP, dhcp, na)
74#include <config_distro_bootcmd.h>
75
76#define CONFIG_EXTRA_ENV_SETTINGS \
77 "kernel_name=Image\0" \
78 "kernel_addr_r=0x00080000\0" \
Alexander Grafda3e6202016-03-04 01:10:11 +010079 "fdtfile=hi6220-hikey.dtb\0" \
Peter Griffin11ac2362015-07-30 18:55:23 +010080 "fdt_addr_r=0x02000000\0" \
81 "fdt_high=0xffffffffffffffff\0" \
82 "initrd_high=0xffffffffffffffff\0" \
83 BOOTENV
84
Robert P. J. Day1cc0a9f2016-05-04 04:47:31 -040085/* Preserve environment on sd card */
Peter Griffin11ac2362015-07-30 18:55:23 +010086#define CONFIG_ENV_SIZE 0x1000
Peter Griffin11ac2362015-07-30 18:55:23 +010087
88/* Monitor Command Prompt */
89#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
Peter Griffin11ac2362015-07-30 18:55:23 +010090#define CONFIG_SYS_MAXARGS 64 /* max command args */
91
Peter Griffin11ac2362015-07-30 18:55:23 +010092#endif /* __HIKEY_H */