blob: e28f080b1fd594aab9e82ed4a00454b625f4bc3a [file] [log] [blame]
Hans de Goede9800cfc2015-04-23 14:27:01 +02001/*
2 * Copyright 2015 Gábor Nyers
3 *
4 * Gábor Nyers <gabor.nyers@gmail.com>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
Hans de Goede9800cfc2015-04-23 14:27:01 +020021 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45/dts-v1/;
46#include "sun4i-a10.dtsi"
47#include "sunxi-common-regulators.dtsi"
48
49#include <dt-bindings/gpio/gpio.h>
50#include <dt-bindings/pinctrl/sun4i-a10.h>
51
52/ {
53 model = "Jesurun Q5";
54 compatible = "jesurun,q5", "allwinner,sun4i-a10";
55
56 aliases {
57 serial0 = &uart0;
58 };
59
60 chosen {
61 stdout-path = "serial0:115200n8";
62 };
63
64 leds {
65 compatible = "gpio-leds";
66 pinctrl-names = "default";
67 pinctrl-0 = <&led_pins_q5>;
68
69 green {
70 label = "q5:green:usr";
71 gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
72 };
73
74 };
75
76 reg_emac_3v3: emac-3v3 {
77 compatible = "regulator-fixed";
78 pinctrl-names = "default";
79 pinctrl-0 = <&emac_power_pin_q5>;
80 regulator-name = "emac-3v3";
81 regulator-min-microvolt = <3300000>;
82 regulator-max-microvolt = <3300000>;
Hans de Goede860fbdd2016-08-18 20:51:12 +020083 startup-delay-us = <20000>;
Hans de Goede9800cfc2015-04-23 14:27:01 +020084 enable-active-high;
85 gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
86 };
87};
88
89&ahci {
90 status = "okay";
91};
92
93&ehci0 {
94 status = "okay";
95};
96
97&ehci1 {
98 status = "okay";
99};
100
101&emac {
102 pinctrl-names = "default";
103 pinctrl-0 = <&emac_pins_a>;
104 phy = <&phy1>;
105 status = "okay";
106};
107
Hans de Goede8b1ba942015-06-02 15:53:40 +0200108&emac_sram {
109 status = "okay";
110};
111
Hans de Goede9800cfc2015-04-23 14:27:01 +0200112&i2c0 {
113 pinctrl-names = "default";
114 pinctrl-0 = <&i2c0_pins_a>;
115 status = "okay";
116
117 axp209: pmic@34 {
118 compatible = "x-powers,axp209";
119 reg = <0x34>;
120 interrupts = <0>;
121
122 interrupt-controller;
123 #interrupt-cells = <1>;
124 };
125};
126
127&ir0 {
128 pinctrl-names = "default";
Hans de Goede8b1ba942015-06-02 15:53:40 +0200129 pinctrl-0 = <&ir0_rx_pins_a>;
Hans de Goede9800cfc2015-04-23 14:27:01 +0200130 status = "okay";
131};
132
133&mdio {
134 phy-supply = <&reg_emac_3v3>;
135 status = "okay";
136
137 phy1: ethernet-phy@1 {
138 reg = <1>;
139 };
140};
141
142&mmc0 {
143 pinctrl-names = "default";
144 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
145 vmmc-supply = <&reg_vcc3v3>;
146 bus-width = <4>;
147 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
148 cd-inverted;
149 status = "okay";
150};
151
152&ohci0 {
153 status = "okay";
154};
155
156&ohci1 {
157 status = "okay";
158};
159
Hans de Goede80e5f832016-03-14 17:37:09 +0100160&otg_sram {
161 status = "okay";
162};
163
Hans de Goede9800cfc2015-04-23 14:27:01 +0200164&pio {
165 emac_power_pin_q5: emac_power_pin@0 {
166 allwinner,pins = "PH19";
167 allwinner,function = "gpio_out";
168 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
169 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
170 };
171
172 led_pins_q5: led_pins@0 {
173 allwinner,pins = "PH20";
174 allwinner,function = "gpio_out";
175 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
176 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
177 };
178};
179
Hans de Goede80e5f832016-03-14 17:37:09 +0100180&reg_usb0_vbus {
181 regulator-boot-on;
182 status = "okay";
183};
184
Hans de Goede9800cfc2015-04-23 14:27:01 +0200185&reg_usb1_vbus {
186 status = "okay";
187};
188
189&reg_usb2_vbus {
190 status = "okay";
191};
192
193&uart0 {
194 pinctrl-names = "default";
195 pinctrl-0 = <&uart0_pins_a>;
196 status = "okay";
197};
198
Hans de Goede80e5f832016-03-14 17:37:09 +0100199&usb_otg {
200 dr_mode = "host";
201 status = "okay";
202};
203
Hans de Goede9800cfc2015-04-23 14:27:01 +0200204&usbphy {
Hans de Goede80e5f832016-03-14 17:37:09 +0100205 usb0_vbus-supply = <&reg_usb0_vbus>;
Hans de Goede9800cfc2015-04-23 14:27:01 +0200206 usb1_vbus-supply = <&reg_usb1_vbus>;
207 usb2_vbus-supply = <&reg_usb2_vbus>;
208 status = "okay";
209};