blob: 1e6bd360dac0eaae2c7a651e35000ba6924e72fa [file] [log] [blame]
Hans de Goede53ab4af2015-04-15 19:03:49 +02001/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
Hans de Goede53ab4af2015-04-15 19:03:49 +020019 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun7i-a20.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/interrupt-controller/irq.h>
49#include <dt-bindings/pinctrl/sun4i-a10.h>
50
51/ {
52 model = "I12 / Q5 / QT840A A20 tvbox";
53 compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
54
55 aliases {
56 serial0 = &uart0;
57 };
58
59 chosen {
60 stdout-path = "serial0:115200n8";
61 };
62
63 leds {
64 compatible = "gpio-leds";
65 pinctrl-names = "default";
66 pinctrl-0 = <&led_pins_i12_tvbox>;
67
68 red {
69 label = "i12_tvbox:red:usr";
70 gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
71 };
72
73 blue {
74 label = "i12_tvbox:blue:usr";
75 gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
76 };
77 };
78
79 reg_vmmc3: vmmc3 {
80 compatible = "regulator-fixed";
81 pinctrl-names = "default";
82 pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
83 regulator-name = "vmmc3";
84 regulator-min-microvolt = <3300000>;
85 regulator-max-microvolt = <3300000>;
86 enable-active-high;
87 gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
88 };
89
90 reg_vmmc3_io: vmmc3-io {
91 compatible = "regulator-fixed";
92 pinctrl-names = "default";
93 pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
94 regulator-name = "vmmc3-io";
95 regulator-min-microvolt = <3300000>;
96 regulator-max-microvolt = <3300000>;
97 /* This controls VCC-PI, must be always on! */
98 regulator-always-on;
99 enable-active-high;
100 gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
101 };
102
103 reg_gmac_3v3: gmac-3v3 {
104 compatible = "regulator-fixed";
105 pinctrl-names = "default";
106 pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
107 regulator-name = "gmac-3v3";
108 regulator-min-microvolt = <3300000>;
109 regulator-max-microvolt = <3300000>;
110 startup-delay-us = <50000>;
111 enable-active-high;
112 gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
113 };
114};
115
116&ehci0 {
117 status = "okay";
118};
119
120&ehci1 {
121 status = "okay";
122};
123
124&gmac {
125 pinctrl-names = "default";
126 pinctrl-0 = <&gmac_pins_mii_a>;
127 phy = <&phy1>;
128 phy-mode = "mii";
129 phy-supply = <&reg_gmac_3v3>;
130 status = "okay";
131
132 phy1: ethernet-phy@1 {
133 reg = <1>;
134 };
135};
136
137&i2c0 {
138 pinctrl-names = "default";
139 pinctrl-0 = <&i2c0_pins_a>;
140 status = "okay";
141
142 axp209: pmic@34 {
143 compatible = "x-powers,axp209";
144 reg = <0x34>;
145 interrupt-parent = <&nmi_intc>;
146 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
147
148 interrupt-controller;
149 #interrupt-cells = <1>;
150 };
151};
152
153&ir0 {
154 pinctrl-names = "default";
Hans de Goede8b1ba942015-06-02 15:53:40 +0200155 pinctrl-0 = <&ir0_rx_pins_a>;
Hans de Goede53ab4af2015-04-15 19:03:49 +0200156 status = "okay";
157};
158
159&mmc0 {
160 pinctrl-names = "default";
161 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
162 vmmc-supply = <&reg_vcc3v3>;
163 bus-width = <4>;
164 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
165 cd-inverted;
166 status = "okay";
167};
168
169&mmc3 {
170 pinctrl-names = "default";
171 pinctrl-0 = <&mmc3_pins_a>;
172 vmmc-supply = <&reg_vmmc3>;
173 bus-width = <4>;
174 non-removable;
175 status = "okay";
176
177 brcmf: bcrmf@1 {
178 reg = <1>;
179 compatible = "brcm,bcm4329-fmac";
180 interrupt-parent = <&pio>;
Hans de Goededa52a4a2015-08-05 17:39:14 +0200181 interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
Hans de Goede53ab4af2015-04-15 19:03:49 +0200182 interrupt-names = "host-wake";
183 };
184};
185
186&mmc3_pins_a {
187 /* AP6210 / AP6330 requires pull-up */
188 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
189};
190
191&ohci0 {
192 status = "okay";
193};
194
195&ohci1 {
196 status = "okay";
197};
198
199&pio {
200 vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
201 allwinner,pins = "PH2";
202 allwinner,function = "gpio_out";
203 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
204 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
205 };
206
207 vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
208 allwinner,pins = "PH12";
209 allwinner,function = "gpio_out";
210 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
211 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
212 };
213
214 gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
215 allwinner,pins = "PH21";
216 allwinner,function = "gpio_out";
217 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
218 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
219 };
220
221 led_pins_i12_tvbox: led_pins@0 {
222 allwinner,pins = "PH9", "PH20";
223 allwinner,function = "gpio_out";
224 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
225 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
226 };
227};
228
229&reg_usb1_vbus {
230 status = "okay";
231};
232
233&reg_usb2_vbus {
234 status = "okay";
235};
236
237&uart0 {
238 pinctrl-names = "default";
239 pinctrl-0 = <&uart0_pins_a>;
240 status = "okay";
241};
242
243&usbphy {
244 usb1_vbus-supply = <&reg_usb1_vbus>;
245 usb2_vbus-supply = <&reg_usb2_vbus>;
246 status = "okay";
247};