Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / bc78d5f25aeee238d6e2ef6b0dda4dfc09f26d2e / . / arch / arm / dts / imx6qdl-gw560x.dtsi
blob: bfe65fd3c09bc0129f0b62698fee3fb78c3fd5c9 [file] [log] [blame]
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]1/*
2 * Copyright 2017 Gateworks Corporation
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/input/input.h>
50#include <dt-bindings/interrupt-controller/irq.h>
51
52/ {
53 /* these are used by bootloader for disabling nodes */
54 aliases {
55 led0 = &led0;
56 led1 = &led1;
57 led2 = &led2;
Tim Harvey19a387f2021-03-01 14:33:35 -0800[diff] [blame]58 mmc0 = &usdhc2;
59 mmc1 = &usdhc3;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]60 ssi0 = &ssi1;
61 usb0 = &usbh1;
62 usb1 = &usbotg;
63 };
64
65 chosen {
66 stdout-path = &uart2;
67 };
68
69 backlight-display {
70 compatible = "pwm-backlight";
71 pwms = <&pwm4 0 5000000>;
72 brightness-levels = <
73 0 1 2 3 4 5 6 7 8 9
74 10 11 12 13 14 15 16 17 18 19
75 20 21 22 23 24 25 26 27 28 29
76 30 31 32 33 34 35 36 37 38 39
77 40 41 42 43 44 45 46 47 48 49
78 50 51 52 53 54 55 56 57 58 59
79 60 61 62 63 64 65 66 67 68 69
80 70 71 72 73 74 75 76 77 78 79
81 80 81 82 83 84 85 86 87 88 89
82 90 91 92 93 94 95 96 97 98 99
83 100
84 >;
85 default-brightness-level = <100>;
86 };
87
88 backlight-keypad {
89 compatible = "gpio-backlight";
90 gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
91 default-on;
92 };
93
94 gpio-keys {
95 compatible = "gpio-keys";
96 #address-cells = <1>;
97 #size-cells = <0>;
98
99 user-pb {
100 label = "user_pb";
101 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
102 linux,code = <BTN_0>;
103 };
104
105 user-pb1x {
106 label = "user_pb1x";
107 linux,code = <BTN_1>;
108 interrupt-parent = <&gsc>;
109 interrupts = <0>;
110 };
111
112 key-erased {
113 label = "key-erased";
114 linux,code = <BTN_2>;
115 interrupt-parent = <&gsc>;
116 interrupts = <1>;
117 };
118
119 eeprom-wp {
120 label = "eeprom_wp";
121 linux,code = <BTN_3>;
122 interrupt-parent = <&gsc>;
123 interrupts = <2>;
124 };
125
126 tamper {
127 label = "tamper";
128 linux,code = <BTN_4>;
129 interrupt-parent = <&gsc>;
130 interrupts = <5>;
131 };
132
133 switch-hold {
134 label = "switch_hold";
135 linux,code = <BTN_5>;
136 interrupt-parent = <&gsc>;
137 interrupts = <7>;
138 };
139 };
140
141 leds {
142 compatible = "gpio-leds";
143 pinctrl-names = "default";
144 pinctrl-0 = <&pinctrl_gpio_leds>;
145
146 led0: user1 {
147 label = "user1";
148 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
149 default-state = "on";
150 linux,default-trigger = "heartbeat";
151 };
152
153 led1: user2 {
154 label = "user2";
155 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
156 default-state = "off";
157 };
158
159 led2: user3 {
160 label = "user3";
161 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
162 default-state = "off";
163 };
164 };
165
166 memory@10000000 {
167 device_type = "memory";
168 reg = <0x10000000 0x40000000>;
169 };
170
171 pps {
172 compatible = "pps-gpio";
173 pinctrl-names = "default";
174 pinctrl-0 = <&pinctrl_pps>;
175 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
176 };
177
178 reg_2p5v: regulator-2p5v {
179 compatible = "regulator-fixed";
180 regulator-name = "2P5V";
181 regulator-min-microvolt = <2500000>;
182 regulator-max-microvolt = <2500000>;
183 regulator-always-on;
184 };
185
186 reg_3p3v: regulator-3p3v {
187 compatible = "regulator-fixed";
188 regulator-name = "3P3V";
189 regulator-min-microvolt = <3300000>;
190 regulator-max-microvolt = <3300000>;
191 regulator-always-on;
192 };
193
194 reg_5p0v: regulator-5p0v {
195 compatible = "regulator-fixed";
196 regulator-name = "5P0V";
197 regulator-min-microvolt = <5000000>;
198 regulator-max-microvolt = <5000000>;
199 regulator-always-on;
200 };
201
202 reg_12p0v: regulator-12p0v {
203 compatible = "regulator-fixed";
204 regulator-name = "12P0V";
205 regulator-min-microvolt = <12000000>;
206 regulator-max-microvolt = <12000000>;
207 gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
208 enable-active-high;
209 };
210
211 reg_1p4v: regulator-vddsoc {
212 compatible = "regulator-fixed";
213 regulator-name = "vdd_soc";
214 regulator-min-microvolt = <1400000>;
215 regulator-max-microvolt = <1400000>;
216 regulator-always-on;
217 };
218
219 reg_usb_h1_vbus: regulator-usb-h1-vbus {
220 compatible = "regulator-fixed";
221 regulator-name = "usb_h1_vbus";
222 regulator-min-microvolt = <5000000>;
223 regulator-max-microvolt = <5000000>;
224 regulator-always-on;
225 };
226
227 reg_usb_otg_vbus: regulator-usb-otg-vbus {
228 compatible = "regulator-fixed";
229 regulator-name = "usb_otg_vbus";
230 regulator-min-microvolt = <5000000>;
231 regulator-max-microvolt = <5000000>;
232 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
233 enable-active-high;
234 };
235
236 sound {
237 compatible = "fsl,imx6q-ventana-sgtl5000",
238 "fsl,imx-audio-sgtl5000";
239 model = "sgtl5000-audio";
240 ssi-controller = <&ssi1>;
241 audio-codec = <&sgtl5000>;
242 audio-routing =
243 "MIC_IN", "Mic Jack",
244 "Mic Jack", "Mic Bias",
245 "Headphone Jack", "HP_OUT";
246 mux-int-port = <1>;
247 mux-ext-port = <4>;
248 };
249};
250
251&audmux {
252 pinctrl-names = "default";
253 pinctrl-0 = <&pinctrl_audmux>;
254 status = "okay";
255};
256
257&ecspi3 {
258 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
259 pinctrl-names = "default";
260 pinctrl-0 = <&pinctrl_ecspi3>;
261 status = "okay";
262};
263
264&can1 {
265 pinctrl-names = "default";
266 pinctrl-0 = <&pinctrl_flexcan>;
267 status = "okay";
268};
269
270&clks {
271 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
272 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
273 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
274 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
275};
276
277&fec {
278 pinctrl-names = "default";
279 pinctrl-0 = <&pinctrl_enet>;
280 phy-mode = "rgmii-id";
281 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
Tim Harveycd18f1e2021-05-03 11:21:27 -0700[diff] [blame]282 phy-reset-duration = <10>;
283 phy-reset-post-delay = <100>;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]284 status = "okay";
285};
286
287&hdmi {
288 ddc-i2c-bus = <&i2c3>;
289 status = "okay";
290};
291
292&i2c1 {
293 clock-frequency = <100000>;
294 pinctrl-names = "default";
295 pinctrl-0 = <&pinctrl_i2c1>;
296 status = "okay";
297
298 gsc: gsc@20 {
299 compatible = "gw,gsc";
300 reg = <0x20>;
301 interrupt-parent = <&gpio1>;
302 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
303 interrupt-controller;
304 #interrupt-cells = <1>;
305 #size-cells = <0>;
306
307 adc {
308 compatible = "gw,gsc-adc";
309 #address-cells = <1>;
310 #size-cells = <0>;
311
312 channel@0 {
313 gw,mode = <0>;
314 reg = <0x00>;
315 label = "temp";
316 };
317
318 channel@2 {
319 gw,mode = <1>;
320 reg = <0x02>;
321 label = "vdd_vin";
322 };
323
324 channel@5 {
325 gw,mode = <1>;
326 reg = <0x05>;
327 label = "vdd_3p3";
328 };
329
330 channel@8 {
331 gw,mode = <1>;
332 reg = <0x08>;
333 label = "vdd_bat";
334 };
335
336 channel@b {
337 gw,mode = <1>;
338 reg = <0x0b>;
339 label = "vdd_5p0";
340 };
341
342 channel@e {
343 gw,mode = <1>;
344 reg = <0xe>;
345 label = "vdd_arm";
346 };
347
348 channel@11 {
349 gw,mode = <1>;
350 reg = <0x11>;
351 label = "vdd_soc";
352 };
353
354 channel@14 {
355 gw,mode = <1>;
356 reg = <0x14>;
357 label = "vdd_3p0";
358 };
359
360 channel@17 {
361 gw,mode = <1>;
362 reg = <0x17>;
363 label = "vdd_1p5";
364 };
365
366 channel@1d {
367 gw,mode = <1>;
368 reg = <0x1d>;
369 label = "vdd_1p8";
370 };
371
372 channel@20 {
373 gw,mode = <1>;
374 reg = <0x20>;
375 label = "vdd_an1";
376 };
377
378 channel@23 {
379 gw,mode = <1>;
380 reg = <0x23>;
381 label = "vdd_2p5";
382 };
383
384 channel@26 {
385 gw,mode = <1>;
386 reg = <0x26>;
387 label = "vdd_gps";
388 };
389
390 channel@29 {
391 gw,mode = <1>;
392 reg = <0x29>;
393 label = "vdd_an2";
394 };
395 };
396 };
397
398 gsc_gpio: gpio@23 {
399 compatible = "nxp,pca9555";
400 reg = <0x23>;
401 gpio-controller;
402 #gpio-cells = <2>;
403 interrupt-parent = <&gsc>;
404 interrupts = <4>;
405 };
406
407 eeprom1: eeprom@50 {
408 compatible = "atmel,24c02";
409 reg = <0x50>;
410 pagesize = <16>;
411 };
412
413 eeprom2: eeprom@51 {
414 compatible = "atmel,24c02";
415 reg = <0x51>;
416 pagesize = <16>;
417 };
418
419 eeprom3: eeprom@52 {
420 compatible = "atmel,24c02";
421 reg = <0x52>;
422 pagesize = <16>;
423 };
424
425 eeprom4: eeprom@53 {
426 compatible = "atmel,24c02";
427 reg = <0x53>;
428 pagesize = <16>;
429 };
430
431 ds1672: rtc@68 {
432 compatible = "dallas,ds1672";
433 reg = <0x68>;
434 };
435};
436
437&i2c2 {
438 clock-frequency = <100000>;
439 pinctrl-names = "default";
440 pinctrl-0 = <&pinctrl_i2c2>;
441 status = "okay";
442
443 sgtl5000: codec@a {
444 compatible = "fsl,sgtl5000";
445 reg = <0x0a>;
446 #sound-dai-cells = <0>;
447 clocks = <&clks IMX6QDL_CLK_CKO>;
448 VDDA-supply = <&reg_1p8v>;
449 VDDIO-supply = <&reg_3p3v>;
450 };
451
452 magn@1c {
453 compatible = "st,lsm9ds1-magn";
454 reg = <0x1c>;
455 pinctrl-names = "default";
456 pinctrl-0 = <&pinctrl_mag>;
457 interrupt-parent = <&gpio5>;
458 interrupts = <9 IRQ_TYPE_EDGE_RISING>;
459 };
460
461 tca8418: keypad@34 {
462 compatible = "ti,tca8418";
463 pinctrl-names = "default";
464 pinctrl-0 = <&pinctrl_keypad>;
465 reg = <0x34>;
466 interrupt-parent = <&gpio5>;
467 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
468 linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0)
469 MATRIX_KEY(0x00, 0x00, BTN_1)
470 MATRIX_KEY(0x01, 0x01, BTN_2)
471 MATRIX_KEY(0x01, 0x00, BTN_3)
472 MATRIX_KEY(0x02, 0x00, BTN_4)
473 MATRIX_KEY(0x00, 0x03, BTN_5)
474 MATRIX_KEY(0x00, 0x02, BTN_6)
475 MATRIX_KEY(0x01, 0x03, BTN_7)
476 MATRIX_KEY(0x01, 0x02, BTN_8)
477 MATRIX_KEY(0x02, 0x02, BTN_9)
478 >;
479 keypad,num-rows = <4>;
480 keypad,num-columns = <4>;
481 };
482
483 ltc3676: pmic@3c {
484 compatible = "lltc,ltc3676";
485 pinctrl-names = "default";
486 pinctrl-0 = <&pinctrl_pmic>;
487 reg = <0x3c>;
488 interrupt-parent = <&gpio1>;
489 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
490
491 regulators {
492 /* VDD_DDR (1+R1/R2 = 2.105) */
493 reg_vdd_ddr: sw2 {
494 regulator-name = "vddddr";
495 regulator-min-microvolt = <868310>;
496 regulator-max-microvolt = <1684000>;
497 lltc,fb-voltage-divider = <221000 200000>;
498 regulator-ramp-delay = <7000>;
499 regulator-boot-on;
500 regulator-always-on;
501 };
502
503 /* VDD_ARM (1+R1/R2 = 1.931) */
504 reg_vdd_arm: sw3 {
505 regulator-name = "vddarm";
506 regulator-min-microvolt = <796551>;
507 regulator-max-microvolt = <1544827>;
508 lltc,fb-voltage-divider = <243000 261000>;
509 regulator-ramp-delay = <7000>;
510 regulator-boot-on;
511 regulator-always-on;
512 linux,phandle = <&reg_vdd_arm>;
513 };
514
515 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
516 reg_1p8v: sw4 {
517 regulator-name = "vdd1p8";
518 regulator-min-microvolt = <1033310>;
519 regulator-max-microvolt = <2004000>;
520 lltc,fb-voltage-divider = <301000 200000>;
521 regulator-ramp-delay = <7000>;
522 regulator-boot-on;
523 regulator-always-on;
524 };
525
526 /* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
527 reg_1p0v: ldo2 {
528 regulator-name = "vdd1p0";
529 regulator-min-microvolt = <950000>;
530 regulator-max-microvolt = <1050000>;
531 lltc,fb-voltage-divider = <78700 200000>;
532 regulator-boot-on;
533 regulator-always-on;
534 };
535
536 /* VDD_AUD_1P8: Audio codec */
537 reg_aud_1p8v: ldo3 {
538 regulator-name = "vdd1p8a";
539 regulator-min-microvolt = <1800000>;
540 regulator-max-microvolt = <1800000>;
541 regulator-boot-on;
542 };
543
544 /* VDD_HIGH (1+R1/R2 = 4.17) */
545 reg_3p0v: ldo4 {
546 regulator-name = "vdd3p0";
547 regulator-min-microvolt = <3023250>;
548 regulator-max-microvolt = <3023250>;
549 lltc,fb-voltage-divider = <634000 200000>;
550 regulator-boot-on;
551 regulator-always-on;
552 };
553 };
554 };
555
556 imu@6a {
557 compatible = "st,lsm9ds1-imu";
558 reg = <0x6a>;
559 st,drdy-int-pin = <1>;
560 pinctrl-names = "default";
561 pinctrl-0 = <&pinctrl_imu>;
562 interrupt-parent = <&gpio5>;
563 interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
564 };
565};
566
567&i2c3 {
568 clock-frequency = <100000>;
569 pinctrl-names = "default";
570 pinctrl-0 = <&pinctrl_i2c3>;
571 status = "okay";
572
573 egalax_ts: touchscreen@4 {
574 compatible = "eeti,egalax_ts";
575 reg = <0x04>;
576 interrupt-parent = <&gpio5>;
577 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
578 wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
579 };
580};
581
582&ldb {
583 fsl,dual-channel;
584 status = "okay";
585
586 lvds-channel@0 {
587 fsl,data-mapping = "spwg";
588 fsl,data-width = <18>;
589 status = "okay";
590
591 display-timings {
592 native-mode = <&timing0>;
593 timing0: hsd100pxn1 {
594 clock-frequency = <65000000>;
595 hactive = <1024>;
596 vactive = <768>;
597 hback-porch = <220>;
598 hfront-porch = <40>;
599 vback-porch = <21>;
600 vfront-porch = <7>;
601 hsync-len = <60>;
602 vsync-len = <10>;
603 };
604 };
605 };
606};
607
608&pcie {
609 pinctrl-names = "default";
610 pinctrl-0 = <&pinctrl_pcie>;
611 reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
612 status = "okay";
613};
614
615&pwm2 {
616 pinctrl-names = "default";
617 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
618 status = "disabled";
619};
620
621&pwm3 {
622 pinctrl-names = "default";
623 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
624 status = "disabled";
625};
626
627&pwm4 {
628 #pwm-cells = <2>;
629 pinctrl-names = "default";
630 pinctrl-0 = <&pinctrl_pwm4>;
631 status = "okay";
632};
633
634&ssi1 {
635 status = "okay";
636};
637
638&uart1 {
639 pinctrl-names = "default";
640 pinctrl-0 = <&pinctrl_uart1>;
641 uart-has-rtscts;
642 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
643 status = "okay";
644};
645
646&uart2 {
647 pinctrl-names = "default";
648 pinctrl-0 = <&pinctrl_uart2>;
649 status = "okay";
650};
651
652&uart5 {
653 pinctrl-names = "default";
654 pinctrl-0 = <&pinctrl_uart5>;
655 status = "okay";
656};
657
658&usbotg {
659 vbus-supply = <&reg_usb_otg_vbus>;
660 pinctrl-names = "default";
661 pinctrl-0 = <&pinctrl_usbotg>;
662 disable-over-current;
Tim Harvey13acc632021-03-01 14:33:31 -0800[diff] [blame]663 dr_mode = "otg";
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]664 status = "okay";
665};
666
667&usbh1 {
668 vbus-supply = <&reg_usb_h1_vbus>;
669 pinctrl-names = "default";
670 pinctrl-0 = <&pinctrl_usbh1>;
671 status = "okay";
672};
673
674&usdhc2 {
675 pinctrl-names = "default";
676 pinctrl-0 = <&pinctrl_usdhc2>;
677 bus-width = <8>;
678 vmmc-supply = <&reg_3p3v>;
679 non-removable;
680 status = "okay";
681};
682
683&usdhc3 {
684 pinctrl-names = "default", "state_100mhz", "state_200mhz";
685 pinctrl-0 = <&pinctrl_usdhc3>;
686 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
687 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
688 cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
689 vmmc-supply = <&reg_3p3v>;
690 status = "okay";
691};
692
693&wdog1 {
694 pinctrl-names = "default";
695 pinctrl-0 = <&pinctrl_wdog>;
696 fsl,ext-reset-output;
697};
698
699&iomuxc {
700 pinctrl_audmux: audmuxgrp {
701 fsl,pins = <
702 /* AUD4 */
703 MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
704 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
705 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
706 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
707 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
708 /* AUD6 */
709 MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0
710 MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0
711 MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0
712 MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0
713 >;
714 };
715
716 pinctrl_ecspi3: escpi3grp {
717 fsl,pins = <
718 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
719 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
720 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
721 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
722 >;
723 };
724
725 pinctrl_enet: enetgrp {
726 fsl,pins = <
727 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
728 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
729 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
730 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
731 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
732 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
733 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
734 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
735 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
736 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
737 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
738 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
739 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
740 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
741 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
742 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
743 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */
744 >;
745 };
746
747 pinctrl_flexcan: flexcangrp {
748 fsl,pins = <
749 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
750 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
751 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
752 >;
753 };
754
755 pinctrl_gpio_leds: gpioledsgrp {
756 fsl,pins = <
757 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
758 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
759 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
760 >;
761 };
762
763 pinctrl_i2c1: i2c1grp {
764 fsl,pins = <
765 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
766 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
767 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
768 >;
769 };
770
771 pinctrl_i2c2: i2c2grp {
772 fsl,pins = <
773 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
774 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
775 >;
776 };
777
778 pinctrl_i2c3: i2c3grp {
779 fsl,pins = <
780 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
781 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
782 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x4001b0b0 /* DIOI2C_DIS# */
783 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x0001b0b0 /* LVDS_TOUCH_IRQ# */
784 MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x0001b0b0 /* LVDS_BACKEN */
785 >;
786 };
787
788 pinctrl_imu: imugrp {
789 fsl,pins = <
790 MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1b0b0
791 >;
792 };
793
794 pinctrl_keypad: keypadgrp {
795 fsl,pins = <
796 MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */
797 MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x0001b0b0 /* KEYPAD_LED_EN */
798 >;
799 };
800
801 pinctrl_mag: maggrp {
802 fsl,pins = <
803 MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0
804 >;
805 };
806
807 pinctrl_pcie: pciegrp {
808 fsl,pins = <
809 MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */
810 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */
811 >;
812 };
813
814 pinctrl_pmic: pmicgrp {
815 fsl,pins = <
816 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
817 >;
818 };
819
820 pinctrl_pps: ppsgrp {
821 fsl,pins = <
822 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
823 >;
824 };
825
826 pinctrl_pwm2: pwm2grp {
827 fsl,pins = <
828 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
829 >;
830 };
831
832 pinctrl_pwm3: pwm3grp {
833 fsl,pins = <
834 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
835 >;
836 };
837
838 pinctrl_pwm4: pwm4grp {
839 fsl,pins = <
840 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
841 >;
842 };
843
844 pinctrl_uart1: uart1grp {
845 fsl,pins = <
846 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
847 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
848 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
849 >;
850 };
851
852 pinctrl_uart2: uart2grp {
853 fsl,pins = <
854 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
855 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
856 >;
857 };
858
859 pinctrl_uart5: uart5grp {
860 fsl,pins = <
861 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
862 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
863 >;
864 };
865
866 pinctrl_usbh1: usbh1grp {
867 fsl,pins = <
868 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* USBHUB_RST# */
869 >;
870 };
871
872 pinctrl_usbotg: usbotggrp {
873 fsl,pins = <
874 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
875 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
876 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
877 >;
878 };
879
880 pinctrl_usdhc2: usdhc2grp {
881 fsl,pins = <
882 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
883 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
884 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
885 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
886 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
887 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
888 MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x170f9
889 MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x170f9
890 MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x170f9
891 MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x170f9
892 >;
893 };
894
895 pinctrl_usdhc3: usdhc3grp {
896 fsl,pins = <
897 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
898 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
899 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
900 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
901 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
902 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
903 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
904 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
905 >;
906 };
907
908 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
909 fsl,pins = <
910 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
911 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
912 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
913 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
914 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
915 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
916 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
917 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
918 >;
919 };
920
921 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
922 fsl,pins = <
923 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
924 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
925 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
926 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
927 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
928 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
929 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
930 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
931 >;
932 };
933
934 pinctrl_wdog: wdoggrp {
935 fsl,pins = <
936 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
937 >;
938 };
939};