blob: 78674a14c8186f2c8016e8414a2051a22dcd4732 [file] [log] [blame]
Heiko Schocherc0dcece2013-08-19 16:39:01 +02001/*
2 * (C) Copyright 2013 Siemens Schweiz AG
3 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4 *
5 * Based on:
6 * U-Boot file:/include/configs/am335x_evm.h
7 *
8 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9 *
10 * SPDX-License-Identifier: GPL-2.0+
11 */
12
Heiko Schocher8c65a2f2015-06-15 14:57:15 +020013#ifndef __CONFIG_THUBAN_H
14#define __CONFIG_THUBAN_H
Heiko Schocherc0dcece2013-08-19 16:39:01 +020015
16#include "siemens-am33x-common.h"
17
Samuel Egli56eb3da2013-11-04 14:05:03 +010018#define DDR_PLL_FREQ 303
19#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
Heiko Schocherc0dcece2013-08-19 16:39:01 +020020
Heiko Schocher8c65a2f2015-06-15 14:57:15 +020021#define BOARD_DFU_BUTTON_GPIO 27 /* Use as default */
Stefan Roesecc072942014-02-25 11:07:22 +010022#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
Heiko Schocherc0dcece2013-08-19 16:39:01 +020023
Heiko Schocher61159b72015-06-16 14:59:34 +020024#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
25 "button_dfu0=27\0" \
26 "led0=103,1,0\0" \
27 "led1=64,0,1\0"
28
Heiko Schocherc0dcece2013-08-19 16:39:01 +020029 /* Physical Memory Map */
30#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
31
32/* I2C Configuration */
33#define CONFIG_SYS_I2C_SPEED 100000
34
35#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
36#define EEPROM_ADDR_DDR3 0x90
37#define EEPROM_ADDR_CHIP 0x120
38
Heiko Schocherc0dcece2013-08-19 16:39:01 +020039#undef CONFIG_MII
Heiko Schocherc0dcece2013-08-19 16:39:01 +020040#define CONFIG_PHY_SMSC
41
42#define CONFIG_FACTORYSET
43
Heiko Schocher61159b72015-06-16 14:59:34 +020044/* Define own nand partitions */
Heiko Schocher8c65a2f2015-06-15 14:57:15 +020045#define CONFIG_ENV_OFFSET_REDUND 0x2E0000
46#define CONFIG_ENV_SIZE_REDUND 0x2000
47#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
Heiko Schocher61159b72015-06-16 14:59:34 +020048
Heiko Schocherc0dcece2013-08-19 16:39:01 +020049#ifndef CONFIG_SPL_BUILD
50
51/* Default env settings */
52#define CONFIG_EXTRA_ENV_SETTINGS \
Heiko Schocher8c65a2f2015-06-15 14:57:15 +020053 "hostname=thuban\0" \
Heiko Schocher6b3943f2016-06-07 08:55:45 +020054 "ubi_off=2048\0"\
Samuel Egli56eb3da2013-11-04 14:05:03 +010055 "nand_img_size=0x400000\0" \
Heiko Schocherc0dcece2013-08-19 16:39:01 +020056 "optargs=\0" \
Heiko Schocher61159b72015-06-16 14:59:34 +020057 "preboot=draco_led 0\0" \
58 CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
59 CONFIG_ENV_SETTINGS_V2 \
60 CONFIG_ENV_SETTINGS_NAND_V2
Heiko Schocherc0dcece2013-08-19 16:39:01 +020061
62#ifndef CONFIG_RESTORE_FLASH
63/* set to negative value for no autoboot */
Heiko Schocherc0dcece2013-08-19 16:39:01 +020064
65#define CONFIG_BOOTCOMMAND \
66"if dfubutton; then " \
67 "run dfu_start; " \
68 "reset; " \
69"fi;" \
Samuel Egli56eb3da2013-11-04 14:05:03 +010070"run nand_boot;" \
Heiko Schocher61159b72015-06-16 14:59:34 +020071"run nand_boot_backup;" \
Samuel Egli56eb3da2013-11-04 14:05:03 +010072"reset;"
73
Heiko Schocherc0dcece2013-08-19 16:39:01 +020074#else
Heiko Schocherc0dcece2013-08-19 16:39:01 +020075
76#define CONFIG_BOOTCOMMAND \
77 "setenv autoload no; " \
78 "dhcp; " \
79 "if tftp 80000000 debrick.scr; then " \
80 "source 80000000; " \
81 "fi"
82#endif
83#endif /* CONFIG_SPL_BUILD */
Heiko Schocher8c65a2f2015-06-15 14:57:15 +020084#endif /* ! __CONFIG_THUBAN_H */