blob: cfa693da18aecbdae21ec66858961e237fa5016a [file] [log] [blame]
wdenkf12e5682003-07-07 20:07:54 +00001/*
Wolfgang Denk29f8f582008-08-09 23:17:32 +02002 * (C) Copyright 2000-2008
wdenkf12e5682003-07-07 20:07:54 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
37#define CONFIG_TQM823M 1 /* ...on a TQM8xxM module */
38
39#ifdef CONFIG_LCD /* with LCD controller ? */
wdenkfd3103b2003-11-25 16:55:19 +000040/* #define CONFIG_NEC_NL6448BC20 1 / * use NEC NL6448BC20 display */
wdenkf12e5682003-07-07 20:07:54 +000041#endif
42
43#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
Wolfgang Denk3cb7a482009-07-28 22:13:52 +020044#define CONFIG_SYS_SMC_RXBUFLEN 128
45#define CONFIG_SYS_MAXIDLE 10
wdenkf12e5682003-07-07 20:07:54 +000046#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
wdenkf12e5682003-07-07 20:07:54 +000047
wdenkae3af052003-08-07 22:18:11 +000048#define CONFIG_BOOTCOUNT_LIMIT
49
50#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
wdenkf12e5682003-07-07 20:07:54 +000051
52#define CONFIG_BOARD_TYPES 1 /* support board types */
53
Wolfgang Denk32bf3d12008-03-03 12:16:44 +010054#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
wdenkf12e5682003-07-07 20:07:54 +000055
56#undef CONFIG_BOOTARGS
57
58#define CONFIG_EXTRA_ENV_SETTINGS \
59 "netdev=eth0\0" \
60 "nfsargs=setenv bootargs root=/dev/nfs rw " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010061 "nfsroot=${serverip}:${rootpath}\0" \
wdenkf12e5682003-07-07 20:07:54 +000062 "ramargs=setenv bootargs root=/dev/ram rw\0" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010063 "addip=setenv bootargs ${bootargs} " \
64 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
65 ":${hostname}:${netdev}:off panic=1\0" \
wdenkf12e5682003-07-07 20:07:54 +000066 "flash_nfs=run nfsargs addip;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010067 "bootm ${kernel_addr}\0" \
wdenkf12e5682003-07-07 20:07:54 +000068 "flash_self=run ramargs addip;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010069 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
70 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
wdenkf12e5682003-07-07 20:07:54 +000071 "rootpath=/opt/eldk/ppc_8xx\0" \
Wolfgang Denk29f8f582008-08-09 23:17:32 +020072 "hostname=TQM823M\0" \
73 "bootfile=TQM823M/uImage\0" \
Wolfgang Denkeb6da802007-09-16 02:39:35 +020074 "fdt_addr=40080000\0" \
75 "kernel_addr=400A0000\0" \
76 "ramdisk_addr=40280000\0" \
Wolfgang Denk29f8f582008-08-09 23:17:32 +020077 "u-boot=TQM823M/u-image.bin\0" \
78 "load=tftp 200000 ${u-boot}\0" \
79 "update=prot off 40000000 +${filesize};" \
80 "era 40000000 +${filesize};" \
81 "cp.b 200000 40000000 ${filesize};" \
82 "sete filesize;save\0" \
wdenkf12e5682003-07-07 20:07:54 +000083 ""
84#define CONFIG_BOOTCOMMAND "run flash_self"
85
86#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020087#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
wdenkf12e5682003-07-07 20:07:54 +000088
89#undef CONFIG_WATCHDOG /* watchdog disabled */
90
91#ifdef CONFIG_LCD
92# undef CONFIG_STATUS_LED /* disturbs display */
93#else
94# define CONFIG_STATUS_LED 1 /* Status LED enabled */
95#endif /* CONFIG_LCD */
96
97#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
98
Jon Loeliger37d4bb72007-07-09 21:38:02 -050099/*
100 * BOOTP options
101 */
102#define CONFIG_BOOTP_SUBNETMASK
103#define CONFIG_BOOTP_GATEWAY
104#define CONFIG_BOOTP_HOSTNAME
105#define CONFIG_BOOTP_BOOTPATH
106#define CONFIG_BOOTP_BOOTFILESIZE
107
wdenkf12e5682003-07-07 20:07:54 +0000108
109#define CONFIG_MAC_PARTITION
110#define CONFIG_DOS_PARTITION
111
112#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
113
wdenkf12e5682003-07-07 20:07:54 +0000114
Jon Loeliger26946902007-07-04 22:30:50 -0500115/*
116 * Command line configuration.
117 */
118#include <config_cmd_default.h>
119
120#define CONFIG_CMD_ASKENV
121#define CONFIG_CMD_DATE
122#define CONFIG_CMD_DHCP
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200123#define CONFIG_CMD_ELF
Wolfgang Denk9a63b7f2009-02-21 21:51:21 +0100124#define CONFIG_CMD_EXT2
Jon Loeliger26946902007-07-04 22:30:50 -0500125#define CONFIG_CMD_IDE
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200126#define CONFIG_CMD_JFFS2
Jon Loeliger26946902007-07-04 22:30:50 -0500127#define CONFIG_CMD_NFS
128#define CONFIG_CMD_SNTP
129
wdenkf12e5682003-07-07 20:07:54 +0000130
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200131#define CONFIG_NETCONSOLE
132
133
wdenkf12e5682003-07-07 20:07:54 +0000134/*
135 * Miscellaneous configurable options
136 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200137#define CONFIG_SYS_LONGHELP /* undef to save memory */
138#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
wdenkf12e5682003-07-07 20:07:54 +0000139
Wolfgang Denk2751a952006-10-28 02:29:14 +0200140#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200141#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
142#ifdef CONFIG_SYS_HUSH_PARSER
143#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
wdenkf12e5682003-07-07 20:07:54 +0000144#endif
145
Jon Loeliger26946902007-07-04 22:30:50 -0500146#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200147#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenkf12e5682003-07-07 20:07:54 +0000148#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200149#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenkf12e5682003-07-07 20:07:54 +0000150#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200151#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
152#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
153#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenkf12e5682003-07-07 20:07:54 +0000154
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200155#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
156#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
wdenkf12e5682003-07-07 20:07:54 +0000157
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200158#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
wdenkf12e5682003-07-07 20:07:54 +0000159
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200160#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenkf12e5682003-07-07 20:07:54 +0000161
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200162#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
wdenkf12e5682003-07-07 20:07:54 +0000163
164/*
165 * Low Level Configuration Settings
166 * (address mappings, register initial values, etc.)
167 * You should know what you are doing if you make changes here.
168 */
169/*-----------------------------------------------------------------------
170 * Internal Memory Mapped Register
171 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200172#define CONFIG_SYS_IMMR 0xFFF00000
wdenkf12e5682003-07-07 20:07:54 +0000173
174/*-----------------------------------------------------------------------
175 * Definitions for initial stack pointer and data area (in DPRAM)
176 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200177#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
178#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
179#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
180#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
181#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenkf12e5682003-07-07 20:07:54 +0000182
183/*-----------------------------------------------------------------------
184 * Start addresses for the final memory configuration
185 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200186 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenkf12e5682003-07-07 20:07:54 +0000187 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200188#define CONFIG_SYS_SDRAM_BASE 0x00000000
189#define CONFIG_SYS_FLASH_BASE 0x40000000
190#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
191#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
192#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
wdenkf12e5682003-07-07 20:07:54 +0000193
194/*
195 * For booting Linux, the board info and command line data
196 * have to be in the first 8 MB of memory, since this is
197 * the maximum mapped by the Linux kernel during initialization.
198 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200199#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenkf12e5682003-07-07 20:07:54 +0000200
201/*-----------------------------------------------------------------------
202 * FLASH organization
203 */
wdenkf12e5682003-07-07 20:07:54 +0000204
Martin Krausee318d9e2007-09-27 11:10:08 +0200205/* use CFI flash driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200206#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200207#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200208#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
209#define CONFIG_SYS_FLASH_EMPTY_INFO
210#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
211#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
212#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
wdenkf12e5682003-07-07 20:07:54 +0000213
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200214#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200215#define CONFIG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
216#define CONFIG_ENV_SIZE 0x08000 /* Total Size of Environment */
217#define CONFIG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
wdenkf12e5682003-07-07 20:07:54 +0000218
219/* Address and size of Redundant Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200220#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
221#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
wdenkf12e5682003-07-07 20:07:54 +0000222
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200223#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
Wolfgang Denk67c31032007-09-16 17:10:04 +0200224
Wolfgang Denk7c803be2008-09-16 18:02:19 +0200225#define CONFIG_MISC_INIT_R /* Make sure to remap flashes correctly */
226
wdenkf12e5682003-07-07 20:07:54 +0000227/*-----------------------------------------------------------------------
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200228 * Dynamic MTD partition support
229 */
Stefan Roese68d7d652009-03-19 13:30:36 +0100230#define CONFIG_CMD_MTDPARTS
Stefan Roese942556a2009-05-12 14:32:58 +0200231#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
232#define CONFIG_FLASH_CFI_MTD
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200233#define MTDIDS_DEFAULT "nor0=TQM8xxM-0"
234
235#define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \
236 "128k(dtb)," \
237 "1920k(kernel)," \
238 "5632(rootfs)," \
Wolfgang Denkcd829192008-08-12 16:08:38 +0200239 "4m(data)"
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200240
241/*-----------------------------------------------------------------------
wdenkf12e5682003-07-07 20:07:54 +0000242 * Hardware Information Block
243 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200244#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
245#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
246#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
wdenkf12e5682003-07-07 20:07:54 +0000247
248/*-----------------------------------------------------------------------
249 * Cache Configuration
250 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200251#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeliger26946902007-07-04 22:30:50 -0500252#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200253#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
wdenkf12e5682003-07-07 20:07:54 +0000254#endif
255
256/*-----------------------------------------------------------------------
257 * SYPCR - System Protection Control 11-9
258 * SYPCR can only be written once after reset!
259 *-----------------------------------------------------------------------
260 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
261 */
262#if defined(CONFIG_WATCHDOG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200263#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
wdenkf12e5682003-07-07 20:07:54 +0000264 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
265#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200266#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
wdenkf12e5682003-07-07 20:07:54 +0000267#endif
268
269/*-----------------------------------------------------------------------
270 * SIUMCR - SIU Module Configuration 11-6
271 *-----------------------------------------------------------------------
272 * PCMCIA config., multi-function pin tri-state
273 */
274#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200275#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
wdenkf12e5682003-07-07 20:07:54 +0000276#else /* we must activate GPL5 in the SIUMCR for CAN */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200277#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
wdenkf12e5682003-07-07 20:07:54 +0000278#endif /* CONFIG_CAN_DRIVER */
279
280/*-----------------------------------------------------------------------
281 * TBSCR - Time Base Status and Control 11-26
282 *-----------------------------------------------------------------------
283 * Clear Reference Interrupt Status, Timebase freezing enabled
284 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200285#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
wdenkf12e5682003-07-07 20:07:54 +0000286
287/*-----------------------------------------------------------------------
288 * RTCSC - Real-Time Clock Status and Control Register 11-27
289 *-----------------------------------------------------------------------
290 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200291#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
wdenkf12e5682003-07-07 20:07:54 +0000292
293/*-----------------------------------------------------------------------
294 * PISCR - Periodic Interrupt Status and Control 11-31
295 *-----------------------------------------------------------------------
296 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
297 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200298#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
wdenkf12e5682003-07-07 20:07:54 +0000299
300/*-----------------------------------------------------------------------
301 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
302 *-----------------------------------------------------------------------
303 * Reset PLL lock status sticky bit, timer expired status bit and timer
304 * interrupt status bit
wdenkf12e5682003-07-07 20:07:54 +0000305 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200306#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
wdenkf12e5682003-07-07 20:07:54 +0000307
308/*-----------------------------------------------------------------------
309 * SCCR - System Clock and reset Control Register 15-27
310 *-----------------------------------------------------------------------
311 * Set clock output, timebase and RTC source and divider,
312 * power management and some other internal clocks
313 */
314#define SCCR_MASK SCCR_EBDF11
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200315#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
wdenkf12e5682003-07-07 20:07:54 +0000316 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
317 SCCR_DFALCD00)
wdenkf12e5682003-07-07 20:07:54 +0000318
319/*-----------------------------------------------------------------------
320 * PCMCIA stuff
321 *-----------------------------------------------------------------------
322 *
323 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200324#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
325#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
326#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
327#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
328#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
329#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
330#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
331#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
wdenkf12e5682003-07-07 20:07:54 +0000332
333/*-----------------------------------------------------------------------
334 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
335 *-----------------------------------------------------------------------
336 */
337
338#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
339
340#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
341#undef CONFIG_IDE_LED /* LED for ide not supported */
342#undef CONFIG_IDE_RESET /* reset for ide not supported */
343
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200344#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
345#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
wdenkf12e5682003-07-07 20:07:54 +0000346
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200347#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
wdenkf12e5682003-07-07 20:07:54 +0000348
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200349#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
wdenkf12e5682003-07-07 20:07:54 +0000350
351/* Offset for data I/O */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200352#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
wdenkf12e5682003-07-07 20:07:54 +0000353
354/* Offset for normal register accesses */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200355#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
wdenkf12e5682003-07-07 20:07:54 +0000356
357/* Offset for alternate registers */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200358#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
wdenkf12e5682003-07-07 20:07:54 +0000359
360/*-----------------------------------------------------------------------
361 *
362 *-----------------------------------------------------------------------
363 *
364 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200365#define CONFIG_SYS_DER 0
wdenkf12e5682003-07-07 20:07:54 +0000366
367/*
368 * Init Memory Controller:
369 *
370 * BR0/1 and OR0/1 (FLASH)
371 */
372
373#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
374#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
375
376/* used to re-map FLASH both when starting from SRAM or FLASH:
377 * restrict access enough to keep SRAM working (if any)
378 * but not too much to meddle with FLASH accesses
379 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200380#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
381#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
wdenkf12e5682003-07-07 20:07:54 +0000382
383/*
384 * FLASH timing:
385 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200386#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
wdenkf12e5682003-07-07 20:07:54 +0000387 OR_SCY_3_CLK | OR_EHTR | OR_BI)
wdenkf12e5682003-07-07 20:07:54 +0000388
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200389#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
390#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
391#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
wdenkf12e5682003-07-07 20:07:54 +0000392
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200393#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
394#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
395#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
wdenkf12e5682003-07-07 20:07:54 +0000396
397/*
398 * BR2/3 and OR2/3 (SDRAM)
399 *
400 */
401#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
402#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
403#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
404
405/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200406#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
wdenkf12e5682003-07-07 20:07:54 +0000407
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200408#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
409#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
wdenkf12e5682003-07-07 20:07:54 +0000410
411#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200412#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
413#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
wdenkf12e5682003-07-07 20:07:54 +0000414#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200415#define CONFIG_SYS_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
416#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
417#define CONFIG_SYS_OR3_CAN (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
418#define CONFIG_SYS_BR3_CAN ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
wdenkf12e5682003-07-07 20:07:54 +0000419 BR_PS_8 | BR_MS_UPMB | BR_V )
420#endif /* CONFIG_CAN_DRIVER */
421
422/*
423 * Memory Periodic Timer Prescaler
424 *
425 * The Divider for PTA (refresh timer) configuration is based on an
426 * example SDRAM configuration (64 MBit, one bank). The adjustment to
427 * the number of chip selects (NCS) and the actually needed refresh
428 * rate is done by setting MPTPR.
429 *
430 * PTA is calculated from
431 * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
432 *
433 * gclk CPU clock (not bus clock!)
434 * Trefresh Refresh cycle * 4 (four word bursts used)
435 *
436 * 4096 Rows from SDRAM example configuration
437 * 1000 factor s -> ms
438 * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
439 * 4 Number of refresh cycles per period
440 * 64 Refresh cycle in ms per number of rows
441 * --------------------------------------------
442 * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
443 *
444 * 50 MHz => 50.000.000 / Divider = 98
445 * 66 Mhz => 66.000.000 / Divider = 129
446 * 80 Mhz => 80.000.000 / Divider = 156
447 */
wdenke9132ea2004-04-24 23:23:30 +0000448
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200449#define CONFIG_SYS_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
450#define CONFIG_SYS_MAMR_PTA 98
wdenkf12e5682003-07-07 20:07:54 +0000451
452/*
453 * For 16 MBit, refresh rates could be 31.3 us
454 * (= 64 ms / 2K = 125 / quad bursts).
455 * For a simpler initialization, 15.6 us is used instead.
456 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200457 * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
458 * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
wdenkf12e5682003-07-07 20:07:54 +0000459 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200460#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
461#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
wdenkf12e5682003-07-07 20:07:54 +0000462
463/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200464#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
465#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
wdenkf12e5682003-07-07 20:07:54 +0000466
467/*
468 * MAMR settings for SDRAM
469 */
470
471/* 8 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200472#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenkf12e5682003-07-07 20:07:54 +0000473 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
474 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
475/* 9 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200476#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenkf12e5682003-07-07 20:07:54 +0000477 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
478 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
479
480
481/*
482 * Internal Definitions
483 *
484 * Boot Flags
485 */
486#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
487#define BOOTFLAG_WARM 0x02 /* Software reboot */
488
489#endif /* __CONFIG_H */