blob: 0ab60839b6cff73b392534b9baff64d9574c2e99 [file] [log] [blame]
Michal Simekf22651c2012-09-28 09:56:37 +00001/*
2 * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
Jagannadha Sutradharudu Teki06fe8da2014-01-09 01:48:10 +05303 * (C) Copyright 2013 Xilinx, Inc.
4 *
5 * Common configuration options for all Zynq boards.
Michal Simekf22651c2012-09-28 09:56:37 +00006 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02007 * SPDX-License-Identifier: GPL-2.0+
Michal Simekf22651c2012-09-28 09:56:37 +00008 */
9
Jagannadha Sutradharudu Teki06fe8da2014-01-09 01:48:10 +053010#ifndef __CONFIG_ZYNQ_COMMON_H
11#define __CONFIG_ZYNQ_COMMON_H
Michal Simekf22651c2012-09-28 09:56:37 +000012
Michal Simekf22651c2012-09-28 09:56:37 +000013/* CPU clock */
Jagannadha Sutradharudu Teki53e49f72014-01-09 01:48:06 +053014#ifndef CONFIG_CPU_FREQ_HZ
15# define CONFIG_CPU_FREQ_HZ 800000000
16#endif
Michal Simekf22651c2012-09-28 09:56:37 +000017
Jagannadha Sutradharudu Teki8cfac502014-01-09 01:48:07 +053018/* Cache options */
19#define CONFIG_CMD_CACHE
20#define CONFIG_SYS_CACHELINE_SIZE 32
21
22#define CONFIG_SYS_L2CACHE_OFF
23#ifndef CONFIG_SYS_L2CACHE_OFF
24# define CONFIG_SYS_L2_PL310
25# define CONFIG_SYS_PL310_BASE 0xf8f02000
26#endif
27
Michal Simeka2ec7fb2015-04-20 12:56:24 +020028#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600
29#define CONFIG_SYS_TIMERBASE ZYNQ_SCUTIMER_BASEADDR
30#define CONFIG_SYS_TIMER_COUNTS_DOWN
31#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
32
Jagannadha Sutradharudu Teki53e49f72014-01-09 01:48:06 +053033/* Serial drivers */
34#define CONFIG_BAUDRATE 115200
Michal Simekf22651c2012-09-28 09:56:37 +000035/* The following table includes the supported baudrates */
36#define CONFIG_SYS_BAUDRATE_TABLE \
37 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
38
Jagannadha Sutradharudu Teki53e49f72014-01-09 01:48:06 +053039/* DCC driver */
40#if defined(CONFIG_ZYNQ_DCC)
41# define CONFIG_ARM_DCC
Michal Simekbf834952013-12-19 23:38:58 +053042#else
43# define CONFIG_ZYNQ_SERIAL
Jagannadha Sutradharudu Teki53e49f72014-01-09 01:48:06 +053044#endif
45
Michal Simekcaacb332015-03-25 13:35:04 +010046#define CONFIG_ZYNQ_GPIO
Michal Simekcaacb332015-03-25 13:35:04 +010047
Michal Simekf22651c2012-09-28 09:56:37 +000048/* Ethernet driver */
Michal Simek596e5782015-11-30 14:34:52 +010049#if defined(CONFIG_ZYNQ_GEM)
Jagannadha Sutradharudu Teki88fcfb12014-01-09 01:48:09 +053050# define CONFIG_MII
51# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
Jagannadha Sutradharudu Teki88fcfb12014-01-09 01:48:09 +053052# define CONFIG_PHY_MARVELL
Michal Simekdd1c3512015-01-13 16:27:14 +010053# define CONFIG_BOOTP_SERVERIP
54# define CONFIG_BOOTP_BOOTPATH
55# define CONFIG_BOOTP_GATEWAY
56# define CONFIG_BOOTP_HOSTNAME
57# define CONFIG_BOOTP_MAY_FAIL
Jagannadha Sutradharudu Teki88fcfb12014-01-09 01:48:09 +053058#endif
Michal Simekf22651c2012-09-28 09:56:37 +000059
Jagannadha Sutradharudu Teki53e49f72014-01-09 01:48:06 +053060/* SPI */
61#ifdef CONFIG_ZYNQ_SPI
Jagannadha Sutradharudu Teki53e49f72014-01-09 01:48:06 +053062# define CONFIG_CMD_SF
63#endif
Michal Simek293eb332013-04-22 14:56:49 +020064
Jagan Tekia241d4e2015-08-17 18:55:02 +053065/* QSPI */
66#ifdef CONFIG_ZYNQ_QSPI
67# define CONFIG_SF_DEFAULT_SPEED 30000000
Jagan Teki232a8e42015-09-04 18:30:34 +053068# define CONFIG_SPI_FLASH_ISSI
Jagan Teki9a762092015-08-17 18:56:38 +053069# define CONFIG_SPI_FLASH_BAR
Jagan Tekia241d4e2015-08-17 18:55:02 +053070# define CONFIG_CMD_SF
71#endif
72
Jagannadha Sutradharudu Tekife5eddb2014-01-09 01:48:20 +053073/* NOR */
74#ifndef CONFIG_SYS_NO_FLASH
75# define CONFIG_SYS_FLASH_BASE 0xE2000000
76# define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024)
77# define CONFIG_SYS_MAX_FLASH_BANKS 1
78# define CONFIG_SYS_MAX_FLASH_SECT 512
79# define CONFIG_SYS_FLASH_ERASE_TOUT 1000
80# define CONFIG_SYS_FLASH_WRITE_TOUT 5000
81# define CONFIG_FLASH_SHOW_PROGRESS 10
82# define CONFIG_SYS_FLASH_CFI
83# undef CONFIG_SYS_FLASH_EMPTY_INFO
84# define CONFIG_FLASH_CFI_DRIVER
85# undef CONFIG_SYS_FLASH_PROTECTION
86# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
87#endif
88
Michal Simek293eb332013-04-22 14:56:49 +020089/* MMC */
90#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
91# define CONFIG_MMC
92# define CONFIG_GENERIC_MMC
93# define CONFIG_SDHCI
94# define CONFIG_ZYNQ_SDHCI
95# define CONFIG_CMD_MMC
Michal Simekf3bd7282015-09-29 01:27:13 +020096# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000
Michal Simek293eb332013-04-22 14:56:49 +020097#endif
98
Siva Durga Prasad Paladuguc6024c82014-02-20 10:28:27 +053099#ifdef CONFIG_ZYNQ_USB
100# define CONFIG_USB_EHCI
101# define CONFIG_CMD_USB
102# define CONFIG_USB_STORAGE
Siva Durga Prasad Paladuguc6024c82014-02-20 10:28:27 +0530103# define CONFIG_USB_EHCI_ZYNQ
104# define CONFIG_USB_ULPI_VIEWPORT
105# define CONFIG_USB_ULPI
106# define CONFIG_EHCI_IS_TDI
107# define CONFIG_USB_MAX_CONTROLLER_COUNT 2
Siva Durga Prasad Paladugu87f3dbd2014-08-25 10:58:33 +0530108
109# define CONFIG_CI_UDC /* ChipIdea CI13xxx UDC */
110# define CONFIG_USB_GADGET
111# define CONFIG_USB_GADGET_DUALSPEED
Paul Kocialkowski01acd6a2015-06-12 19:56:58 +0200112# define CONFIG_USB_GADGET_DOWNLOAD
Siva Durga Prasad Paladugu87f3dbd2014-08-25 10:58:33 +0530113# define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000
114# define DFU_DEFAULT_POLL_TIMEOUT 300
Paul Kocialkowski01acd6a2015-06-12 19:56:58 +0200115# define CONFIG_USB_FUNCTION_DFU
Siva Durga Prasad Paladugu87f3dbd2014-08-25 10:58:33 +0530116# define CONFIG_DFU_RAM
117# define CONFIG_USB_GADGET_VBUS_DRAW 2
118# define CONFIG_G_DNL_VENDOR_NUM 0x03FD
119# define CONFIG_G_DNL_PRODUCT_NUM 0x0300
120# define CONFIG_G_DNL_MANUFACTURER "Xilinx"
121# define CONFIG_USB_GADGET
122# define CONFIG_USB_CABLE_CHECK
123# define CONFIG_CMD_DFU
Siva Durga Prasad Paladuguc4fa5112014-09-08 22:09:37 +0530124# define CONFIG_CMD_THOR_DOWNLOAD
Paul Kocialkowski01acd6a2015-06-12 19:56:58 +0200125# define CONFIG_USB_FUNCTION_THOR
Siva Durga Prasad Paladugu87f3dbd2014-08-25 10:58:33 +0530126# define DFU_ALT_INFO_RAM \
127 "dfu_ram_info=" \
128 "set dfu_alt_info " \
129 "${kernel_image} ram 0x3000000 0x500000\\\\;" \
130 "${devicetree_image} ram 0x2A00000 0x20000\\\\;" \
131 "${ramdisk_image} ram 0x2000000 0x600000\0" \
Siva Durga Prasad Paladuguc4fa5112014-09-08 22:09:37 +0530132 "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
133 "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
Siva Durga Prasad Paladugu87f3dbd2014-08-25 10:58:33 +0530134
135# if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
136# define CONFIG_DFU_MMC
137# define DFU_ALT_INFO_MMC \
138 "dfu_mmc_info=" \
139 "set dfu_alt_info " \
140 "${kernel_image} fat 0 1\\\\;" \
141 "${devicetree_image} fat 0 1\\\\;" \
142 "${ramdisk_image} fat 0 1\0" \
Siva Durga Prasad Paladuguc4fa5112014-09-08 22:09:37 +0530143 "dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0\0" \
144 "thor_mmc=run dfu_mmc_info && thordown 0 mmc 0\0"
145
Siva Durga Prasad Paladugu87f3dbd2014-08-25 10:58:33 +0530146# define DFU_ALT_INFO \
147 DFU_ALT_INFO_RAM \
148 DFU_ALT_INFO_MMC
149# else
150# define DFU_ALT_INFO \
151 DFU_ALT_INFO_RAM
152# endif
153#endif
154
155#if !defined(DFU_ALT_INFO)
156# define DFU_ALT_INFO
Siva Durga Prasad Paladuguc6024c82014-02-20 10:28:27 +0530157#endif
158
Siva Durga Prasad Paladugu47b35a52014-03-12 14:52:56 +0530159#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
Michal Simekf22651c2012-09-28 09:56:37 +0000160# define CONFIG_SUPPORT_VFAT
Siva Durga Prasad Paladugu47b35a52014-03-12 14:52:56 +0530161# define CONFIG_CMD_FAT
Michal Simekf22651c2012-09-28 09:56:37 +0000162# define CONFIG_CMD_EXT2
Siva Durga Prasad Paladugu47b35a52014-03-12 14:52:56 +0530163# define CONFIG_FAT_WRITE
Michal Simekf22651c2012-09-28 09:56:37 +0000164# define CONFIG_DOS_PARTITION
Siva Durga Prasad Paladugu2e38a902014-03-12 14:52:56 +0530165# define CONFIG_CMD_EXT4
166# define CONFIG_CMD_EXT4_WRITE
Michal Simeke9d69c12014-09-24 14:55:03 +0200167# define CONFIG_CMD_FS_GENERIC
Michal Simekf22651c2012-09-28 09:56:37 +0000168#endif
169
Siva Durga Prasad Paladugu1c3f2c72015-10-28 11:19:08 +0530170#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
Michael Burr18948632014-01-22 09:46:08 +0100171#define CONFIG_SYS_I2C_ZYNQ
Siva Durga Prasad Paladugu1c3f2c72015-10-28 11:19:08 +0530172#endif
173
Michal Simek8934f782013-04-22 15:21:33 +0200174/* I2C */
Michael Burr18948632014-01-22 09:46:08 +0100175#if defined(CONFIG_SYS_I2C_ZYNQ)
Michal Simek8934f782013-04-22 15:21:33 +0200176# define CONFIG_CMD_I2C
Heiko Schocher0bdffe72013-11-08 07:30:53 +0100177# define CONFIG_SYS_I2C
Heiko Schocher0bdffe72013-11-08 07:30:53 +0100178# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
Michael Burr18948632014-01-22 09:46:08 +0100179# define CONFIG_SYS_I2C_ZYNQ_SLAVE 0
Michal Simek8934f782013-04-22 15:21:33 +0200180#endif
181
Jagannadha Sutradharudu Teki65da1ef2014-01-09 01:48:16 +0530182/* EEPROM */
183#ifdef CONFIG_ZYNQ_EEPROM
184# define CONFIG_CMD_EEPROM
185# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
186# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
187# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
188# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
189# define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */
190#endif
191
Jagannadha Sutradharudu Teki18eee222014-01-09 01:48:23 +0530192/* Total Size of Environment Sector */
193#define CONFIG_ENV_SIZE (128 << 10)
194
Jagannadha Sutradharudu Tekib660ca12014-01-09 01:48:25 +0530195/* Allow to overwrite serial and ethaddr */
196#define CONFIG_ENV_OVERWRITE
197
Michal Simekf22651c2012-09-28 09:56:37 +0000198/* Environment */
Jagannadha Sutradharudu Tekied53e4d2014-01-09 01:48:24 +0530199#ifndef CONFIG_ENV_IS_NOWHERE
200# ifndef CONFIG_SYS_NO_FLASH
201# define CONFIG_ENV_IS_IN_FLASH
202# elif defined(CONFIG_SYS_NO_FLASH)
203# define CONFIG_ENV_IS_NOWHERE
204# endif
205
206# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
207# define CONFIG_ENV_OFFSET 0xE0000
Jagannadha Sutradharudu Tekied53e4d2014-01-09 01:48:24 +0530208#endif
Jagannadha Sutradharudu Tekie83f61a2014-01-09 01:48:22 +0530209
210/* Default environment */
211#define CONFIG_EXTRA_ENV_SETTINGS \
212 "fit_image=fit.itb\0" \
213 "load_addr=0x2000000\0" \
214 "fit_size=0x800000\0" \
215 "flash_off=0x100000\0" \
216 "nor_flash_off=0xE2100000\0" \
217 "fdt_high=0x20000000\0" \
218 "initrd_high=0x20000000\0" \
219 "norboot=echo Copying FIT from NOR flash to RAM... && " \
220 "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
221 "bootm ${load_addr}\0" \
222 "sdboot=echo Copying FIT from SD to RAM... && " \
Michal Simeke9d69c12014-09-24 14:55:03 +0200223 "load mmc 0 ${load_addr} ${fit_image} && " \
Jagannadha Sutradharudu Tekie83f61a2014-01-09 01:48:22 +0530224 "bootm ${load_addr}\0" \
225 "jtagboot=echo TFTPing FIT to RAM... && " \
Michal Simekdfa94052014-02-05 07:56:07 +0100226 "tftpboot ${load_addr} ${fit_image} && " \
Siva Durga Prasad Paladuguc6024c82014-02-20 10:28:27 +0530227 "bootm ${load_addr}\0" \
228 "usbboot=if usb start; then " \
229 "echo Copying FIT from USB to RAM... && " \
Michal Simeke9d69c12014-09-24 14:55:03 +0200230 "load usb 0 ${load_addr} ${fit_image} && " \
Siva Durga Prasad Paladuguc6024c82014-02-20 10:28:27 +0530231 "bootm ${load_addr}\0" \
Siva Durga Prasad Paladugu87f3dbd2014-08-25 10:58:33 +0530232 "fi\0" \
233 DFU_ALT_INFO
Siva Durga Prasad Paladuguc6024c82014-02-20 10:28:27 +0530234
Jagannadha Sutradharudu Tekie83f61a2014-01-09 01:48:22 +0530235#define CONFIG_BOOTCOMMAND "run $modeboot"
236#define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */
237#define CONFIG_SYS_LOAD_ADDR 0 /* default? */
Michal Simekf22651c2012-09-28 09:56:37 +0000238
Jagannadha Sutradharudu Teki36e0e192014-01-09 01:48:04 +0530239/* Miscellaneous configurable options */
Jagannadha Sutradharudu Teki36e0e192014-01-09 01:48:04 +0530240#define CONFIG_SYS_HUSH_PARSER
241
242#define CONFIG_CMDLINE_EDITING
243#define CONFIG_AUTO_COMPLETE
Jagannadha Sutradharudu Tekib3de9242014-01-09 01:48:21 +0530244#define CONFIG_BOARD_LATE_INIT
Michal Simek5a82d532014-08-28 13:31:02 +0200245#define CONFIG_DISPLAY_BOARDINFO
Jagannadha Sutradharudu Teki36e0e192014-01-09 01:48:04 +0530246#define CONFIG_SYS_LONGHELP
Soren Brinkmann6c3e61d2013-11-21 13:38:54 -0800247#define CONFIG_CLOCKS
Soren Brinkmannd6c9bba2013-11-21 13:39:03 -0800248#define CONFIG_CMD_CLK
Michal Simek841426a2014-04-25 13:33:19 +0200249#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
Jagannadha Sutradharudu Teki36e0e192014-01-09 01:48:04 +0530250#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
251#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
Michal Simekf22651c2012-09-28 09:56:37 +0000252 sizeof(CONFIG_SYS_PROMPT) + 16)
253
Jagannadha Sutradharudu Teki7cd04192014-01-09 01:48:05 +0530254/* Physical Memory map */
Jagannadha Sutradharudu Teki0f5c2152014-01-09 01:48:15 +0530255#define CONFIG_SYS_TEXT_BASE 0x4000000
Michal Simekf22651c2012-09-28 09:56:37 +0000256
Jagannadha Sutradharudu Teki7cd04192014-01-09 01:48:05 +0530257#define CONFIG_NR_DRAM_BANKS 1
258#define CONFIG_SYS_SDRAM_BASE 0
Jagannadha Sutradharudu Teki7cd04192014-01-09 01:48:05 +0530259
260#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
261#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
262
Przemyslaw Marczak599807f2015-03-04 14:01:28 +0100263#define CONFIG_SYS_MALLOC_LEN 0x1400000
Jagannadha Sutradharudu Teki7cd04192014-01-09 01:48:05 +0530264#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
265#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
266#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
267 CONFIG_SYS_INIT_RAM_SIZE - \
268 GENERATED_GBL_DATA_SIZE)
Jagannadha Sutradharudu Teki53e49f72014-01-09 01:48:06 +0530269
270/* Enable the PL to be downloaded */
271#define CONFIG_FPGA
272#define CONFIG_FPGA_XILINX
273#define CONFIG_FPGA_ZYNQPL
Siva Durga Prasad Paladugu64e809a2014-03-14 16:35:38 +0530274#define CONFIG_CMD_FPGA_LOADMK
Michal Simek26ea9ce2014-05-02 14:50:50 +0200275#define CONFIG_CMD_FPGA_LOADP
276#define CONFIG_CMD_FPGA_LOADBP
Siva Durga Prasad Paladugu1a897662014-03-14 16:35:37 +0530277#define CONFIG_CMD_FPGA_LOADFS
Jagannadha Sutradharudu Teki53e49f72014-01-09 01:48:06 +0530278
279/* Open Firmware flat tree */
280#define CONFIG_OF_LIBFDT
281
282/* FIT support */
Heiko Schocher21d29f72014-05-28 11:33:33 +0200283#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
Michal Simekf22651c2012-09-28 09:56:37 +0000284
Jagannadha Sutradharudu Tekif8f36c52014-01-09 01:48:26 +0530285/* FDT support */
Jagannadha Sutradharudu Tekif8f36c52014-01-09 01:48:26 +0530286#define CONFIG_DISPLAY_BOARDINFO_LATE
287
Michal Simekae9f4892014-01-20 11:29:06 +0100288/* Extend size of kernel image for uncompression */
Michal Simek3d456ee2014-01-20 11:29:06 +0100289#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
Michal Simekae9f4892014-01-20 11:29:06 +0100290
Jagannadha Sutradharudu Teki09ed6352014-01-09 01:48:03 +0530291/* Boot FreeBSD/vxWorks from an ELF image */
292#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
Jagannadha Sutradharudu Teki09ed6352014-01-09 01:48:03 +0530293# define CONFIG_SYS_MMC_MAX_DEVICE 1
294#endif
295
Masahiro Yamada0107f242015-03-16 16:43:22 +0900296#define CONFIG_SYS_LDSCRIPT "arch/arm/mach-zynq/u-boot.lds"
Michal Simek38716182014-02-05 08:06:29 +0100297
Michal Simekf22651c2012-09-28 09:56:37 +0000298/* Commands */
Michal Simekf22651c2012-09-28 09:56:37 +0000299#define CONFIG_CMD_PING
300#define CONFIG_CMD_DHCP
301#define CONFIG_CMD_MII
Michal Simek427b2d42014-01-20 14:40:26 +0100302#define CONFIG_CMD_TFTPPUT
Michal Simekf22651c2012-09-28 09:56:37 +0000303
Michal Simekd7e269c2014-01-14 14:21:52 +0100304/* SPL part */
Michal Simekd7e269c2014-01-14 14:21:52 +0100305#define CONFIG_CMD_SPL
306#define CONFIG_SPL_FRAMEWORK
307#define CONFIG_SPL_LIBCOMMON_SUPPORT
308#define CONFIG_SPL_LIBGENERIC_SUPPORT
309#define CONFIG_SPL_SERIAL_SUPPORT
Michal Simek1540fb72014-04-25 12:15:40 +0200310#define CONFIG_SPL_BOARD_INIT
Michal Simekd7e269c2014-01-14 14:21:52 +0100311
Masahiro Yamada0107f242015-03-16 16:43:22 +0900312#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-zynq/u-boot-spl.lds"
Michal Simekd7e269c2014-01-14 14:21:52 +0100313
Michal Simekd7e269c2014-01-14 14:21:52 +0100314/* MMC support */
315#ifdef CONFIG_ZYNQ_SDHCI0
316#define CONFIG_SPL_MMC_SUPPORT
317#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
318#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
Paul Kocialkowskie2ccdf82014-11-08 23:14:55 +0100319#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
Michal Simekd7e269c2014-01-14 14:21:52 +0100320#define CONFIG_SPL_LIBDISK_SUPPORT
321#define CONFIG_SPL_FAT_SUPPORT
Michal Simek8741c492015-11-09 10:39:44 +0100322#ifdef CONFIG_OF_SEPARATE
Simon Glassfa43f692015-10-17 19:41:20 -0600323# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
324#else
325# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
326#endif
Masahiro Yamada0dfbcf02014-05-15 20:37:52 +0900327#endif
328
329/* Disable dcache for SPL just for sure */
330#ifdef CONFIG_SPL_BUILD
331#define CONFIG_SYS_DCACHE_OFF
332#undef CONFIG_FPGA
Michal Simekd7e269c2014-01-14 14:21:52 +0100333#endif
334
335/* Address in RAM where the parameters must be copied by SPL. */
336#define CONFIG_SYS_SPL_ARGS_ADDR 0x10000000
337
Guillaume GARDET205b4f32014-10-15 17:53:11 +0200338#define CONFIG_SPL_FS_LOAD_ARGS_NAME "system.dtb"
339#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
Michal Simekd7e269c2014-01-14 14:21:52 +0100340
341/* Not using MMC raw mode - just for compilation purpose */
342#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0
343#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0
344#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0
345
346/* qspi mode is working fine */
347#ifdef CONFIG_ZYNQ_QSPI
348#define CONFIG_SPL_SPI_SUPPORT
349#define CONFIG_SPL_SPI_LOAD
350#define CONFIG_SPL_SPI_FLASH_SUPPORT
Michal Simekd7e269c2014-01-14 14:21:52 +0100351#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000
Siva Durga Prasad Paladugu8e0e01d2015-09-14 12:59:08 +0530352#define CONFIG_SYS_SPI_ARGS_OFFS 0x200000
353#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
354#define CONFIG_SYS_SPI_KERNEL_OFFS (CONFIG_SYS_SPI_ARGS_OFFS + \
355 CONFIG_SYS_SPI_ARGS_SIZE)
Michal Simekd7e269c2014-01-14 14:21:52 +0100356#endif
357
358/* for booting directly linux */
359#define CONFIG_SPL_OS_BOOT
360
361/* SP location before relocation, must use scratch RAM */
362#define CONFIG_SPL_TEXT_BASE 0x0
363
364/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
365#define CONFIG_SPL_MAX_SIZE 0x30000
366
367/* The highest 64k OCM address */
368#define OCM_HIGH_ADDR 0xffff0000
369
Michal Simekd7e269c2014-01-14 14:21:52 +0100370/* On the top of OCM space */
Michal Simek83b64642015-11-23 16:27:38 +0100371#define CONFIG_SYS_SPL_MALLOC_START OCM_HIGH_ADDR
Michal Simekec016a12015-12-01 09:03:43 +0100372#define CONFIG_SYS_SPL_MALLOC_SIZE 0x2000
Michal Simekd7e269c2014-01-14 14:21:52 +0100373
Michal Simek83b64642015-11-23 16:27:38 +0100374/*
375 * SPL stack position - and stack goes down
376 * 0xfffffe00 is used for putting wfi loop.
377 * Set it up as limit for now.
378 */
379#define CONFIG_SPL_STACK 0xfffffe00
380
Michal Simekd7e269c2014-01-14 14:21:52 +0100381/* BSS setup */
382#define CONFIG_SPL_BSS_START_ADDR 0x100000
383#define CONFIG_SPL_BSS_MAX_SIZE 0x100000
384
385#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
Michal Simekf22651c2012-09-28 09:56:37 +0000386
Michal Simek2b257212014-05-08 15:10:48 +0200387
Jagannadha Sutradharudu Teki06fe8da2014-01-09 01:48:10 +0530388#endif /* __CONFIG_ZYNQ_COMMON_H */