Przemyslaw Marczak | 5decbf5 | 2015-10-27 13:08:00 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2015 Samsung Electronics |
| 3 | * Przemyslaw Marczak <p.marczak@samsung.com> |
| 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <errno.h> |
| 10 | #include <dm.h> |
| 11 | #include <dm/lists.h> |
| 12 | #include <dm/device-internal.h> |
| 13 | #include <dm/uclass-internal.h> |
| 14 | #include <adc.h> |
| 15 | #include <power/regulator.h> |
| 16 | |
| 17 | DECLARE_GLOBAL_DATA_PTR; |
| 18 | |
| 19 | #define ADC_UCLASS_PLATDATA_SIZE sizeof(struct adc_uclass_platdata) |
| 20 | #define CHECK_NUMBER true |
| 21 | #define CHECK_MASK (!CHECK_NUMBER) |
| 22 | |
| 23 | /* TODO: add support for timer uclass (for early calls) */ |
| 24 | #ifdef CONFIG_SANDBOX_ARCH |
| 25 | #define sdelay(x) udelay(x) |
| 26 | #else |
| 27 | extern void sdelay(unsigned long loops); |
| 28 | #endif |
| 29 | |
| 30 | static int check_channel(struct udevice *dev, int value, bool number_or_mask, |
| 31 | const char *caller_function) |
| 32 | { |
| 33 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 34 | unsigned mask = number_or_mask ? (1 << value) : value; |
| 35 | |
| 36 | /* For the real ADC hardware, some ADC channels can be inactive. |
| 37 | * For example if device has 4 analog channels, and only channels |
| 38 | * 1-st and 3-rd are valid, then channel mask is: 0b1010, so request |
| 39 | * with mask 0b1110 should return an error. |
| 40 | */ |
| 41 | if ((uc_pdata->channel_mask >= mask) && (uc_pdata->channel_mask & mask)) |
| 42 | return 0; |
| 43 | |
| 44 | printf("Error in %s/%s().\nWrong channel selection for device: %s\n", |
| 45 | __FILE__, caller_function, dev->name); |
| 46 | |
| 47 | return -EINVAL; |
| 48 | } |
| 49 | |
| 50 | static int adc_supply_enable(struct udevice *dev) |
| 51 | { |
| 52 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 53 | const char *supply_type; |
| 54 | int ret = 0; |
| 55 | |
| 56 | if (uc_pdata->vdd_supply) { |
| 57 | supply_type = "vdd"; |
| 58 | ret = regulator_set_enable(uc_pdata->vdd_supply, true); |
| 59 | } |
| 60 | |
| 61 | if (!ret && uc_pdata->vss_supply) { |
| 62 | supply_type = "vss"; |
| 63 | ret = regulator_set_enable(uc_pdata->vss_supply, true); |
| 64 | } |
| 65 | |
| 66 | if (ret) |
| 67 | error("%s: can't enable %s-supply!", dev->name, supply_type); |
| 68 | |
| 69 | return ret; |
| 70 | } |
| 71 | |
| 72 | int adc_data_mask(struct udevice *dev, unsigned int *data_mask) |
| 73 | { |
| 74 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 75 | |
| 76 | if (!uc_pdata) |
| 77 | return -ENOSYS; |
| 78 | |
| 79 | *data_mask = uc_pdata->data_mask; |
| 80 | return 0; |
| 81 | } |
| 82 | |
| 83 | int adc_stop(struct udevice *dev) |
| 84 | { |
| 85 | const struct adc_ops *ops = dev_get_driver_ops(dev); |
| 86 | |
| 87 | if (!ops->stop) |
| 88 | return -ENOSYS; |
| 89 | |
| 90 | return ops->stop(dev); |
| 91 | } |
| 92 | |
| 93 | int adc_start_channel(struct udevice *dev, int channel) |
| 94 | { |
| 95 | const struct adc_ops *ops = dev_get_driver_ops(dev); |
| 96 | int ret; |
| 97 | |
| 98 | if (!ops->start_channel) |
| 99 | return -ENOSYS; |
| 100 | |
| 101 | ret = check_channel(dev, channel, CHECK_NUMBER, __func__); |
| 102 | if (ret) |
| 103 | return ret; |
| 104 | |
| 105 | ret = adc_supply_enable(dev); |
| 106 | if (ret) |
| 107 | return ret; |
| 108 | |
| 109 | return ops->start_channel(dev, channel); |
| 110 | } |
| 111 | |
| 112 | int adc_start_channels(struct udevice *dev, unsigned int channel_mask) |
| 113 | { |
| 114 | const struct adc_ops *ops = dev_get_driver_ops(dev); |
| 115 | int ret; |
| 116 | |
| 117 | if (!ops->start_channels) |
| 118 | return -ENOSYS; |
| 119 | |
| 120 | ret = check_channel(dev, channel_mask, CHECK_MASK, __func__); |
| 121 | if (ret) |
| 122 | return ret; |
| 123 | |
| 124 | ret = adc_supply_enable(dev); |
| 125 | if (ret) |
| 126 | return ret; |
| 127 | |
| 128 | return ops->start_channels(dev, channel_mask); |
| 129 | } |
| 130 | |
| 131 | int adc_channel_data(struct udevice *dev, int channel, unsigned int *data) |
| 132 | { |
| 133 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 134 | const struct adc_ops *ops = dev_get_driver_ops(dev); |
| 135 | unsigned int timeout_us = uc_pdata->data_timeout_us; |
| 136 | int ret; |
| 137 | |
| 138 | if (!ops->channel_data) |
| 139 | return -ENOSYS; |
| 140 | |
| 141 | ret = check_channel(dev, channel, CHECK_NUMBER, __func__); |
| 142 | if (ret) |
| 143 | return ret; |
| 144 | |
| 145 | do { |
| 146 | ret = ops->channel_data(dev, channel, data); |
| 147 | if (!ret || ret != -EBUSY) |
| 148 | break; |
| 149 | |
| 150 | /* TODO: use timer uclass (for early calls). */ |
| 151 | sdelay(5); |
| 152 | } while (timeout_us--); |
| 153 | |
| 154 | return ret; |
| 155 | } |
| 156 | |
| 157 | int adc_channels_data(struct udevice *dev, unsigned int channel_mask, |
| 158 | struct adc_channel *channels) |
| 159 | { |
| 160 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 161 | unsigned int timeout_us = uc_pdata->multidata_timeout_us; |
| 162 | const struct adc_ops *ops = dev_get_driver_ops(dev); |
| 163 | int ret; |
| 164 | |
| 165 | if (!ops->channels_data) |
| 166 | return -ENOSYS; |
| 167 | |
| 168 | ret = check_channel(dev, channel_mask, CHECK_MASK, __func__); |
| 169 | if (ret) |
| 170 | return ret; |
| 171 | |
| 172 | do { |
| 173 | ret = ops->channels_data(dev, channel_mask, channels); |
| 174 | if (!ret || ret != -EBUSY) |
| 175 | break; |
| 176 | |
| 177 | /* TODO: use timer uclass (for early calls). */ |
| 178 | sdelay(5); |
| 179 | } while (timeout_us--); |
| 180 | |
| 181 | return ret; |
| 182 | } |
| 183 | |
| 184 | int adc_channel_single_shot(const char *name, int channel, unsigned int *data) |
| 185 | { |
| 186 | struct udevice *dev; |
| 187 | int ret; |
| 188 | |
| 189 | ret = uclass_get_device_by_name(UCLASS_ADC, name, &dev); |
| 190 | if (ret) |
| 191 | return ret; |
| 192 | |
| 193 | ret = adc_start_channel(dev, channel); |
| 194 | if (ret) |
| 195 | return ret; |
| 196 | |
| 197 | ret = adc_channel_data(dev, channel, data); |
| 198 | if (ret) |
| 199 | return ret; |
| 200 | |
| 201 | return 0; |
| 202 | } |
| 203 | |
| 204 | static int _adc_channels_single_shot(struct udevice *dev, |
| 205 | unsigned int channel_mask, |
| 206 | struct adc_channel *channels) |
| 207 | { |
| 208 | unsigned int data; |
| 209 | int channel, ret; |
| 210 | |
| 211 | for (channel = 0; channel <= ADC_MAX_CHANNEL; channel++) { |
| 212 | /* Check channel bit. */ |
| 213 | if (!((channel_mask >> channel) & 0x1)) |
| 214 | continue; |
| 215 | |
| 216 | ret = adc_start_channel(dev, channel); |
| 217 | if (ret) |
| 218 | return ret; |
| 219 | |
| 220 | ret = adc_channel_data(dev, channel, &data); |
| 221 | if (ret) |
| 222 | return ret; |
| 223 | |
| 224 | channels->id = channel; |
| 225 | channels->data = data; |
| 226 | channels++; |
| 227 | } |
| 228 | |
| 229 | return 0; |
| 230 | } |
| 231 | |
| 232 | int adc_channels_single_shot(const char *name, unsigned int channel_mask, |
| 233 | struct adc_channel *channels) |
| 234 | { |
| 235 | struct udevice *dev; |
| 236 | int ret; |
| 237 | |
| 238 | ret = uclass_get_device_by_name(UCLASS_ADC, name, &dev); |
| 239 | if (ret) |
| 240 | return ret; |
| 241 | |
| 242 | ret = adc_start_channels(dev, channel_mask); |
| 243 | if (ret) |
| 244 | goto try_manual; |
| 245 | |
| 246 | ret = adc_channels_data(dev, channel_mask, channels); |
| 247 | if (ret) |
| 248 | return ret; |
| 249 | |
| 250 | return 0; |
| 251 | |
| 252 | try_manual: |
| 253 | if (ret != -ENOSYS) |
| 254 | return ret; |
| 255 | |
| 256 | return _adc_channels_single_shot(dev, channel_mask, channels); |
| 257 | } |
| 258 | |
| 259 | static int adc_vdd_platdata_update(struct udevice *dev) |
| 260 | { |
| 261 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 262 | int ret; |
| 263 | |
| 264 | /* Warning! |
| 265 | * This function can't return supply device before its bind. |
| 266 | * Please pay attention to proper fdt scan sequence. If ADC device |
| 267 | * will bind before its supply regulator device, then the below 'get' |
| 268 | * will return an error. |
| 269 | */ |
| 270 | ret = device_get_supply_regulator(dev, "vdd-supply", |
| 271 | &uc_pdata->vdd_supply); |
| 272 | if (ret) |
| 273 | return ret; |
| 274 | |
| 275 | ret = regulator_get_value(uc_pdata->vdd_supply); |
| 276 | if (ret < 0) |
| 277 | return ret; |
| 278 | |
| 279 | uc_pdata->vdd_microvolts = ret; |
| 280 | |
| 281 | return 0; |
| 282 | } |
| 283 | |
| 284 | static int adc_vss_platdata_update(struct udevice *dev) |
| 285 | { |
| 286 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 287 | int ret; |
| 288 | |
| 289 | ret = device_get_supply_regulator(dev, "vss-supply", |
| 290 | &uc_pdata->vss_supply); |
| 291 | if (ret) |
| 292 | return ret; |
| 293 | |
| 294 | ret = regulator_get_value(uc_pdata->vss_supply); |
| 295 | if (ret < 0) |
| 296 | return ret; |
| 297 | |
| 298 | uc_pdata->vss_microvolts = ret; |
| 299 | |
| 300 | return 0; |
| 301 | } |
| 302 | |
| 303 | int adc_vdd_value(struct udevice *dev, int *uV) |
| 304 | { |
| 305 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 306 | int ret, value_sign = uc_pdata->vdd_polarity_negative ? -1 : 1; |
| 307 | |
| 308 | if (!uc_pdata->vdd_supply) |
| 309 | goto nodev; |
| 310 | |
| 311 | /* Update the regulator Value. */ |
| 312 | ret = adc_vdd_platdata_update(dev); |
| 313 | if (ret) |
| 314 | return ret; |
| 315 | nodev: |
| 316 | if (uc_pdata->vdd_microvolts == -ENODATA) |
| 317 | return -ENODATA; |
| 318 | |
| 319 | *uV = uc_pdata->vdd_microvolts * value_sign; |
| 320 | |
| 321 | return 0; |
| 322 | } |
| 323 | |
| 324 | int adc_vss_value(struct udevice *dev, int *uV) |
| 325 | { |
| 326 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 327 | int ret, value_sign = uc_pdata->vss_polarity_negative ? -1 : 1; |
| 328 | |
| 329 | if (!uc_pdata->vss_supply) |
| 330 | goto nodev; |
| 331 | |
| 332 | /* Update the regulator Value. */ |
| 333 | ret = adc_vss_platdata_update(dev); |
| 334 | if (ret) |
| 335 | return ret; |
| 336 | nodev: |
| 337 | if (uc_pdata->vss_microvolts == -ENODATA) |
| 338 | return -ENODATA; |
| 339 | |
| 340 | *uV = uc_pdata->vss_microvolts * value_sign; |
| 341 | |
| 342 | return 0; |
| 343 | } |
| 344 | |
| 345 | static int adc_vdd_platdata_set(struct udevice *dev) |
| 346 | { |
| 347 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
Simon Glass | e160f7d | 2017-01-17 16:52:55 -0700 | [diff] [blame] | 348 | int ret, offset = dev_of_offset(dev); |
Przemyslaw Marczak | 5decbf5 | 2015-10-27 13:08:00 +0100 | [diff] [blame] | 349 | const void *fdt = gd->fdt_blob; |
| 350 | char *prop; |
| 351 | |
| 352 | prop = "vdd-polarity-negative"; |
| 353 | uc_pdata->vdd_polarity_negative = fdtdec_get_bool(fdt, offset, prop); |
| 354 | |
| 355 | ret = adc_vdd_platdata_update(dev); |
| 356 | if (ret != -ENOENT) |
| 357 | return ret; |
| 358 | |
| 359 | /* No vdd-supply phandle. */ |
| 360 | prop = "vdd-microvolts"; |
| 361 | uc_pdata->vdd_microvolts = fdtdec_get_int(fdt, offset, prop, -ENODATA); |
| 362 | |
| 363 | return 0; |
| 364 | } |
| 365 | |
| 366 | static int adc_vss_platdata_set(struct udevice *dev) |
| 367 | { |
| 368 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
Simon Glass | e160f7d | 2017-01-17 16:52:55 -0700 | [diff] [blame] | 369 | int ret, offset = dev_of_offset(dev); |
Przemyslaw Marczak | 5decbf5 | 2015-10-27 13:08:00 +0100 | [diff] [blame] | 370 | const void *fdt = gd->fdt_blob; |
| 371 | char *prop; |
| 372 | |
| 373 | prop = "vss-polarity-negative"; |
| 374 | uc_pdata->vss_polarity_negative = fdtdec_get_bool(fdt, offset, prop); |
| 375 | |
| 376 | ret = adc_vss_platdata_update(dev); |
| 377 | if (ret != -ENOENT) |
| 378 | return ret; |
| 379 | |
| 380 | /* No vss-supply phandle. */ |
| 381 | prop = "vss-microvolts"; |
| 382 | uc_pdata->vss_microvolts = fdtdec_get_int(fdt, offset, prop, -ENODATA); |
| 383 | |
| 384 | return 0; |
| 385 | } |
| 386 | |
| 387 | static int adc_pre_probe(struct udevice *dev) |
| 388 | { |
| 389 | int ret; |
| 390 | |
| 391 | /* Set ADC VDD platdata: polarity, uV, regulator (phandle). */ |
| 392 | ret = adc_vdd_platdata_set(dev); |
| 393 | if (ret) |
| 394 | error("%s: Can't update Vdd. Error: %d", dev->name, ret); |
| 395 | |
| 396 | /* Set ADC VSS platdata: polarity, uV, regulator (phandle). */ |
| 397 | ret = adc_vss_platdata_set(dev); |
| 398 | if (ret) |
| 399 | error("%s: Can't update Vss. Error: %d", dev->name, ret); |
| 400 | |
| 401 | return 0; |
| 402 | } |
| 403 | |
| 404 | UCLASS_DRIVER(adc) = { |
| 405 | .id = UCLASS_ADC, |
| 406 | .name = "adc", |
| 407 | .pre_probe = adc_pre_probe, |
| 408 | .per_device_platdata_auto_alloc_size = ADC_UCLASS_PLATDATA_SIZE, |
| 409 | }; |