blob: 23b0114eb4db4c9d6262e181a243695d8dd8a3a5 [file] [log] [blame]
Hans de Goede53ab4af2015-04-15 19:03:49 +02001/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
Hans de Goede53ab4af2015-04-15 19:03:49 +020019 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun5i-a10s.dtsi"
45#include "sunxi-common-regulators.dtsi"
46#include <dt-bindings/gpio/gpio.h>
47
48/ {
49 model = "MK802-A10s";
50 compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
51
52 aliases {
53 serial0 = &uart0;
54 };
55
56 chosen {
57 stdout-path = "serial0:115200n8";
58 };
59
60 leds {
61 compatible = "gpio-leds";
62 pinctrl-names = "default";
63 pinctrl-0 = <&led_pins_mk802>;
64
65 red {
66 label = "mk802:red:usr";
67 gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
68 };
69 };
70};
71
72&ehci0 {
73 status = "okay";
74};
75
Hans de Goede860fbdd2016-08-18 20:51:12 +020076&i2c0 {
77 pinctrl-names = "default";
78 pinctrl-0 = <&i2c0_pins_a>;
79 status = "okay";
80
81 axp152: pmic@30 {
82 compatible = "x-powers,axp152";
83 reg = <0x30>;
84 interrupts = <0>;
85 interrupt-controller;
86 #interrupt-cells = <1>;
87 };
88};
89
Hans de Goede53ab4af2015-04-15 19:03:49 +020090&mmc0 {
91 pinctrl-names = "default";
92 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
93 vmmc-supply = <&reg_vcc3v3>;
94 bus-width = <4>;
95 cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
96 cd-inverted;
97 status = "okay";
98};
99
Hans de Goede860fbdd2016-08-18 20:51:12 +0200100&mmc1 {
101 pinctrl-names = "default";
102 pinctrl-0 = <&mmc1_pins_a>;
103 vmmc-supply = <&reg_vcc3v3>;
104 bus-width = <4>;
105 non-removable;
106 status = "okay";
107};
108
Hans de Goede53ab4af2015-04-15 19:03:49 +0200109&ohci0 {
110 status = "okay";
111};
112
Hans de Goede860fbdd2016-08-18 20:51:12 +0200113&otg_sram {
114 status = "okay";
115};
116
Hans de Goede53ab4af2015-04-15 19:03:49 +0200117&pio {
118 led_pins_mk802: led_pins@0 {
119 allwinner,pins = "PB2";
120 allwinner,function = "gpio_out";
121 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
122 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
123 };
124
125 mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
126 allwinner,pins = "PG1";
127 allwinner,function = "gpio_in";
128 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
129 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
130 };
131
132 usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
133 allwinner,pins = "PB10";
134 allwinner,function = "gpio_out";
135 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
136 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
137 };
138};
139
140&reg_usb1_vbus {
141 pinctrl-0 = <&usb1_vbus_pin_mk802>;
142 gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
143 status = "okay";
144};
145
146&uart0 {
147 pinctrl-names = "default";
148 pinctrl-0 = <&uart0_pins_a>;
149 status = "okay";
150};
151
Hans de Goede860fbdd2016-08-18 20:51:12 +0200152&usb_otg {
153 dr_mode = "otg";
154 status = "okay";
155};
156
Hans de Goede53ab4af2015-04-15 19:03:49 +0200157&usbphy {
158 usb1_vbus-supply = <&reg_usb1_vbus>;
159 status = "okay";
160};