Tom Warren | 6c43f6c | 2015-02-02 13:22:29 -0700 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2013-2015 |
| 3 | * NVIDIA Corporation <www.nvidia.com> |
| 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | |
| 8 | /* Tegra210 Clock control functions */ |
| 9 | |
| 10 | #include <common.h> |
| 11 | #include <asm/io.h> |
| 12 | #include <asm/arch/clock.h> |
| 13 | #include <asm/arch/sysctr.h> |
| 14 | #include <asm/arch/tegra.h> |
| 15 | #include <asm/arch-tegra/clk_rst.h> |
| 16 | #include <asm/arch-tegra/timer.h> |
| 17 | #include <div64.h> |
| 18 | #include <fdtdec.h> |
| 19 | |
| 20 | /* |
| 21 | * Clock types that we can use as a source. The Tegra210 has muxes for the |
| 22 | * peripheral clocks, and in most cases there are four options for the clock |
| 23 | * source. This gives us a clock 'type' and exploits what commonality exists |
| 24 | * in the device. |
| 25 | * |
| 26 | * Letters are obvious, except for T which means CLK_M, and S which means the |
| 27 | * clock derived from 32KHz. Beware that CLK_M (also called OSC in the |
| 28 | * datasheet) and PLL_M are different things. The former is the basic |
| 29 | * clock supplied to the SOC from an external oscillator. The latter is the |
| 30 | * memory clock PLL. |
| 31 | * |
| 32 | * See definitions in clock_id in the header file. |
| 33 | */ |
| 34 | enum clock_type_id { |
| 35 | CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */ |
| 36 | CLOCK_TYPE_MCPA, /* and so on */ |
| 37 | CLOCK_TYPE_MCPT, |
| 38 | CLOCK_TYPE_PCM, |
| 39 | CLOCK_TYPE_PCMT, |
| 40 | CLOCK_TYPE_PDCT, |
| 41 | CLOCK_TYPE_ACPT, |
| 42 | CLOCK_TYPE_ASPTE, |
| 43 | CLOCK_TYPE_PMDACD2T, |
| 44 | CLOCK_TYPE_PCST, |
Simon Glass | 5a30cee | 2015-08-10 07:14:36 -0600 | [diff] [blame] | 45 | CLOCK_TYPE_DP, |
Tom Warren | 6c43f6c | 2015-02-02 13:22:29 -0700 | [diff] [blame] | 46 | |
| 47 | CLOCK_TYPE_PC2CC3M, |
| 48 | CLOCK_TYPE_PC2CC3S_T, |
| 49 | CLOCK_TYPE_PC2CC3M_T, |
| 50 | CLOCK_TYPE_PC2CC3M_T16, /* PC2CC3M_T, but w/16-bit divisor (I2C) */ |
| 51 | CLOCK_TYPE_MC2CC3P_A, |
| 52 | CLOCK_TYPE_M, |
| 53 | CLOCK_TYPE_MCPTM2C2C3, |
| 54 | CLOCK_TYPE_PC2CC3T_S, |
| 55 | CLOCK_TYPE_AC2CC3P_TS2, |
| 56 | CLOCK_TYPE_PC01C00_C42C41TC40, |
| 57 | |
| 58 | CLOCK_TYPE_COUNT, |
| 59 | CLOCK_TYPE_NONE = -1, /* invalid clock type */ |
| 60 | }; |
| 61 | |
| 62 | enum { |
| 63 | CLOCK_MAX_MUX = 8 /* number of source options for each clock */ |
| 64 | }; |
| 65 | |
| 66 | /* |
| 67 | * Clock source mux for each clock type. This just converts our enum into |
| 68 | * a list of mux sources for use by the code. |
| 69 | * |
| 70 | * Note: |
| 71 | * The extra column in each clock source array is used to store the mask |
| 72 | * bits in its register for the source. |
| 73 | */ |
| 74 | #define CLK(x) CLOCK_ID_ ## x |
| 75 | static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = { |
| 76 | { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC), |
| 77 | CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| 78 | MASK_BITS_31_30}, |
| 79 | { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO), |
| 80 | CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| 81 | MASK_BITS_31_30}, |
| 82 | { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), |
| 83 | CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| 84 | MASK_BITS_31_30}, |
| 85 | { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE), |
| 86 | CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| 87 | MASK_BITS_31_30}, |
| 88 | { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC), |
| 89 | CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| 90 | MASK_BITS_31_30}, |
| 91 | { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC), |
| 92 | CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| 93 | MASK_BITS_31_30}, |
| 94 | { CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), |
| 95 | CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| 96 | MASK_BITS_31_30}, |
| 97 | { CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC), |
| 98 | CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE), |
| 99 | MASK_BITS_31_29}, |
| 100 | { CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO), |
| 101 | CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE), |
| 102 | MASK_BITS_31_29}, |
| 103 | { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC), |
| 104 | CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| 105 | MASK_BITS_31_28}, |
Simon Glass | 5a30cee | 2015-08-10 07:14:36 -0600 | [diff] [blame] | 106 | /* CLOCK_TYPE_DP */ |
| 107 | { CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| 108 | CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| 109 | MASK_BITS_31_28}, |
Tom Warren | 6c43f6c | 2015-02-02 13:22:29 -0700 | [diff] [blame] | 110 | |
| 111 | /* Additional clock types on Tegra114+ */ |
| 112 | /* CLOCK_TYPE_PC2CC3M */ |
| 113 | { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), |
| 114 | CLK(MEMORY), CLK(NONE), CLK(NONE), CLK(NONE), |
| 115 | MASK_BITS_31_29}, |
| 116 | /* CLOCK_TYPE_PC2CC3S_T */ |
| 117 | { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), |
| 118 | CLK(SFROM32KHZ), CLK(NONE), CLK(OSC), CLK(NONE), |
| 119 | MASK_BITS_31_29}, |
| 120 | /* CLOCK_TYPE_PC2CC3M_T */ |
| 121 | { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), |
| 122 | CLK(MEMORY), CLK(NONE), CLK(OSC), CLK(NONE), |
| 123 | MASK_BITS_31_29}, |
| 124 | /* CLOCK_TYPE_PC2CC3M_T, w/16-bit divisor (I2C) */ |
| 125 | { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), |
| 126 | CLK(MEMORY), CLK(NONE), CLK(OSC), CLK(NONE), |
| 127 | MASK_BITS_31_29}, |
| 128 | /* CLOCK_TYPE_MC2CC3P_A */ |
| 129 | { CLK(MEMORY), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), |
| 130 | CLK(PERIPH), CLK(NONE), CLK(AUDIO), CLK(NONE), |
| 131 | MASK_BITS_31_29}, |
| 132 | /* CLOCK_TYPE_M */ |
| 133 | { CLK(MEMORY), CLK(NONE), CLK(NONE), CLK(NONE), |
| 134 | CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| 135 | MASK_BITS_31_30}, |
| 136 | /* CLOCK_TYPE_MCPTM2C2C3 */ |
| 137 | { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), |
| 138 | CLK(MEMORY2), CLK(CGENERAL2), CLK(CGENERAL3), CLK(NONE), |
| 139 | MASK_BITS_31_29}, |
| 140 | /* CLOCK_TYPE_PC2CC3T_S */ |
| 141 | { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), |
| 142 | CLK(OSC), CLK(NONE), CLK(SFROM32KHZ), CLK(NONE), |
| 143 | MASK_BITS_31_29}, |
| 144 | /* CLOCK_TYPE_AC2CC3P_TS2 */ |
| 145 | { CLK(AUDIO), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), |
| 146 | CLK(PERIPH), CLK(NONE), CLK(OSC), CLK(SRC2), |
| 147 | MASK_BITS_31_29}, |
| 148 | /* CLOCK_TYPE_PC01C00_C42C41TC40 */ |
| 149 | { CLK(PERIPH), CLK(CGENERAL_1), CLK(CGENERAL_0), CLK(NONE), |
| 150 | CLK(CGENERAL4_2), CLK(CGENERAL4_1), CLK(OSC), CLK(CGENERAL4_0), |
| 151 | MASK_BITS_31_29}, |
| 152 | }; |
| 153 | |
| 154 | /* |
| 155 | * Clock type for each peripheral clock source. We put the name in each |
| 156 | * record just so it is easy to match things up |
| 157 | */ |
| 158 | #define TYPE(name, type) type |
| 159 | static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = { |
| 160 | /* 0x00 */ |
| 161 | TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT), |
| 162 | TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT), |
| 163 | TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT), |
| 164 | TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PC2CC3M), |
| 165 | TYPE(PERIPHC_PWM, CLOCK_TYPE_PC2CC3S_T), |
| 166 | TYPE(PERIPHC_05h, CLOCK_TYPE_NONE), |
| 167 | TYPE(PERIPHC_SBC2, CLOCK_TYPE_PC2CC3M_T), |
| 168 | TYPE(PERIPHC_SBC3, CLOCK_TYPE_PC2CC3M_T), |
| 169 | |
| 170 | /* 0x08 */ |
| 171 | TYPE(PERIPHC_08h, CLOCK_TYPE_NONE), |
| 172 | TYPE(PERIPHC_I2C1, CLOCK_TYPE_PC2CC3M_T16), |
| 173 | TYPE(PERIPHC_I2C5, CLOCK_TYPE_PC2CC3M_T16), |
| 174 | TYPE(PERIPHC_0bh, CLOCK_TYPE_NONE), |
| 175 | TYPE(PERIPHC_0ch, CLOCK_TYPE_NONE), |
| 176 | TYPE(PERIPHC_SBC1, CLOCK_TYPE_PC2CC3M_T), |
| 177 | TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T), |
| 178 | TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T), |
| 179 | |
| 180 | /* 0x10 */ |
| 181 | TYPE(PERIPHC_10h, CLOCK_TYPE_NONE), |
| 182 | TYPE(PERIPHC_11h, CLOCK_TYPE_NONE), |
| 183 | TYPE(PERIPHC_VI, CLOCK_TYPE_MC2CC3P_A), |
| 184 | TYPE(PERIPHC_13h, CLOCK_TYPE_NONE), |
| 185 | TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PC2CC3M_T), |
| 186 | TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PC2CC3M_T), |
| 187 | TYPE(PERIPHC_16h, CLOCK_TYPE_NONE), |
| 188 | TYPE(PERIPHC_17h, CLOCK_TYPE_NONE), |
| 189 | |
| 190 | /* 0x18 */ |
| 191 | TYPE(PERIPHC_18h, CLOCK_TYPE_NONE), |
| 192 | TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PC2CC3M_T), |
| 193 | TYPE(PERIPHC_VFIR, CLOCK_TYPE_PC2CC3M_T), |
| 194 | TYPE(PERIPHC_1Bh, CLOCK_TYPE_NONE), |
| 195 | TYPE(PERIPHC_1Ch, CLOCK_TYPE_NONE), |
| 196 | TYPE(PERIPHC_HSI, CLOCK_TYPE_PC2CC3M_T), |
| 197 | TYPE(PERIPHC_UART1, CLOCK_TYPE_PC2CC3M_T), |
| 198 | TYPE(PERIPHC_UART2, CLOCK_TYPE_PC2CC3M_T), |
| 199 | |
| 200 | /* 0x20 */ |
| 201 | TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MC2CC3P_A), |
| 202 | TYPE(PERIPHC_21h, CLOCK_TYPE_NONE), |
| 203 | TYPE(PERIPHC_22h, CLOCK_TYPE_NONE), |
| 204 | TYPE(PERIPHC_23h, CLOCK_TYPE_NONE), |
| 205 | TYPE(PERIPHC_24h, CLOCK_TYPE_NONE), |
| 206 | TYPE(PERIPHC_25h, CLOCK_TYPE_NONE), |
| 207 | TYPE(PERIPHC_I2C2, CLOCK_TYPE_PC2CC3M_T16), |
| 208 | TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPTM2C2C3), |
| 209 | |
| 210 | /* 0x28 */ |
| 211 | TYPE(PERIPHC_UART3, CLOCK_TYPE_PC2CC3M_T), |
| 212 | TYPE(PERIPHC_29h, CLOCK_TYPE_NONE), |
| 213 | TYPE(PERIPHC_VI_SENSOR, CLOCK_TYPE_MC2CC3P_A), |
| 214 | TYPE(PERIPHC_2bh, CLOCK_TYPE_NONE), |
| 215 | TYPE(PERIPHC_2ch, CLOCK_TYPE_NONE), |
| 216 | TYPE(PERIPHC_SBC4, CLOCK_TYPE_PC2CC3M_T), |
| 217 | TYPE(PERIPHC_I2C3, CLOCK_TYPE_PC2CC3M_T16), |
| 218 | TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PC2CC3M_T), |
| 219 | |
| 220 | /* 0x30 */ |
| 221 | TYPE(PERIPHC_UART4, CLOCK_TYPE_PC2CC3M_T), |
| 222 | TYPE(PERIPHC_UART5, CLOCK_TYPE_PC2CC3M_T), |
| 223 | TYPE(PERIPHC_VDE, CLOCK_TYPE_PC2CC3M_T), |
| 224 | TYPE(PERIPHC_OWR, CLOCK_TYPE_PC2CC3M_T), |
| 225 | TYPE(PERIPHC_NOR, CLOCK_TYPE_PC2CC3M_T), |
| 226 | TYPE(PERIPHC_CSITE, CLOCK_TYPE_PC2CC3M_T), |
| 227 | TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT), |
| 228 | TYPE(PERIPHC_DTV, CLOCK_TYPE_NONE), |
| 229 | |
| 230 | /* 0x38 */ |
| 231 | TYPE(PERIPHC_38h, CLOCK_TYPE_NONE), |
| 232 | TYPE(PERIPHC_39h, CLOCK_TYPE_NONE), |
| 233 | TYPE(PERIPHC_3ah, CLOCK_TYPE_NONE), |
| 234 | TYPE(PERIPHC_3bh, CLOCK_TYPE_NONE), |
| 235 | TYPE(PERIPHC_MSENC, CLOCK_TYPE_MC2CC3P_A), |
| 236 | TYPE(PERIPHC_TSEC, CLOCK_TYPE_PC2CC3M_T), |
| 237 | TYPE(PERIPHC_3eh, CLOCK_TYPE_NONE), |
| 238 | TYPE(PERIPHC_OSC, CLOCK_TYPE_NONE), |
| 239 | |
| 240 | /* 0x40 */ |
| 241 | TYPE(PERIPHC_40h, CLOCK_TYPE_NONE), /* start with 0x3b0 */ |
| 242 | TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PC2CC3M_T), |
| 243 | TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PC2CC3T_S), |
| 244 | TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT), |
| 245 | TYPE(PERIPHC_I2S5, CLOCK_TYPE_AXPT), |
| 246 | TYPE(PERIPHC_I2C4, CLOCK_TYPE_PC2CC3M_T16), |
| 247 | TYPE(PERIPHC_SBC5, CLOCK_TYPE_PC2CC3M_T), |
| 248 | TYPE(PERIPHC_SBC6, CLOCK_TYPE_PC2CC3M_T), |
| 249 | |
| 250 | /* 0x48 */ |
| 251 | TYPE(PERIPHC_AUDIO, CLOCK_TYPE_AC2CC3P_TS2), |
| 252 | TYPE(PERIPHC_49h, CLOCK_TYPE_NONE), |
| 253 | TYPE(PERIPHC_4ah, CLOCK_TYPE_NONE), |
| 254 | TYPE(PERIPHC_4bh, CLOCK_TYPE_NONE), |
| 255 | TYPE(PERIPHC_4ch, CLOCK_TYPE_NONE), |
| 256 | TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PC2CC3M_T), |
| 257 | TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PC2CC3S_T), |
| 258 | TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE), |
| 259 | |
| 260 | /* 0x50 */ |
| 261 | TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE), |
| 262 | TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE), |
| 263 | TYPE(PERIPHC_52h, CLOCK_TYPE_NONE), |
| 264 | TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PC2CC3S_T), |
| 265 | TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE), |
| 266 | TYPE(PERIPHC_55h, CLOCK_TYPE_NONE), |
| 267 | TYPE(PERIPHC_56h, CLOCK_TYPE_NONE), |
| 268 | TYPE(PERIPHC_57h, CLOCK_TYPE_NONE), |
| 269 | |
| 270 | /* 0x58 */ |
| 271 | TYPE(PERIPHC_58h, CLOCK_TYPE_NONE), |
| 272 | TYPE(PERIPHC_59h, CLOCK_TYPE_NONE), |
| 273 | TYPE(PERIPHC_5ah, CLOCK_TYPE_NONE), |
| 274 | TYPE(PERIPHC_5bh, CLOCK_TYPE_NONE), |
| 275 | TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), |
| 276 | TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT), |
| 277 | TYPE(PERIPHC_HDA, CLOCK_TYPE_PC2CC3M_T), |
| 278 | TYPE(PERIPHC_5fh, CLOCK_TYPE_NONE), |
| 279 | |
| 280 | /* 0x60 */ |
| 281 | TYPE(PERIPHC_XUSB_CORE_HOST, CLOCK_TYPE_NONE), |
| 282 | TYPE(PERIPHC_XUSB_FALCON, CLOCK_TYPE_NONE), |
| 283 | TYPE(PERIPHC_XUSB_FS, CLOCK_TYPE_NONE), |
| 284 | TYPE(PERIPHC_XUSB_CORE_DEV, CLOCK_TYPE_NONE), |
| 285 | TYPE(PERIPHC_XUSB_SS, CLOCK_TYPE_NONE), |
| 286 | TYPE(PERIPHC_CILAB, CLOCK_TYPE_NONE), |
| 287 | TYPE(PERIPHC_CILCD, CLOCK_TYPE_NONE), |
| 288 | TYPE(PERIPHC_CILE, CLOCK_TYPE_NONE), |
| 289 | |
| 290 | /* 0x68 */ |
| 291 | TYPE(PERIPHC_DSIA_LP, CLOCK_TYPE_NONE), |
| 292 | TYPE(PERIPHC_DSIB_LP, CLOCK_TYPE_NONE), |
| 293 | TYPE(PERIPHC_ENTROPY, CLOCK_TYPE_NONE), |
| 294 | TYPE(PERIPHC_DVFS_REF, CLOCK_TYPE_NONE), |
| 295 | TYPE(PERIPHC_DVFS_SOC, CLOCK_TYPE_NONE), |
| 296 | TYPE(PERIPHC_TRACECLKIN, CLOCK_TYPE_NONE), |
| 297 | TYPE(PERIPHC_6eh, CLOCK_TYPE_NONE), |
| 298 | TYPE(PERIPHC_6fh, CLOCK_TYPE_NONE), |
| 299 | |
| 300 | /* 0x70 */ |
| 301 | TYPE(PERIPHC_EMC_LATENCY, CLOCK_TYPE_NONE), |
| 302 | TYPE(PERIPHC_SOC_THERM, CLOCK_TYPE_NONE), |
| 303 | TYPE(PERIPHC_72h, CLOCK_TYPE_NONE), |
| 304 | TYPE(PERIPHC_73h, CLOCK_TYPE_NONE), |
| 305 | TYPE(PERIPHC_74h, CLOCK_TYPE_NONE), |
| 306 | TYPE(PERIPHC_75h, CLOCK_TYPE_NONE), |
| 307 | TYPE(PERIPHC_VI_SENSOR2, CLOCK_TYPE_NONE), |
| 308 | TYPE(PERIPHC_I2C6, CLOCK_TYPE_PC2CC3M_T16), |
| 309 | |
| 310 | /* 0x78 */ |
| 311 | TYPE(PERIPHC_78h, CLOCK_TYPE_NONE), |
| 312 | TYPE(PERIPHC_EMC_DLL, CLOCK_TYPE_MCPTM2C2C3), |
| 313 | TYPE(PERIPHC_7ah, CLOCK_TYPE_NONE), |
| 314 | TYPE(PERIPHC_CLK72MHZ, CLOCK_TYPE_NONE), |
| 315 | TYPE(PERIPHC_7ch, CLOCK_TYPE_NONE), |
| 316 | TYPE(PERIPHC_7dh, CLOCK_TYPE_NONE), |
| 317 | TYPE(PERIPHC_VIC, CLOCK_TYPE_NONE), |
| 318 | TYPE(PERIPHC_7Fh, CLOCK_TYPE_NONE), |
| 319 | |
| 320 | /* 0x80 */ |
| 321 | TYPE(PERIPHC_SDMMC_LEGACY_TM, CLOCK_TYPE_NONE), |
| 322 | TYPE(PERIPHC_NVDEC, CLOCK_TYPE_NONE), |
| 323 | TYPE(PERIPHC_NVJPG, CLOCK_TYPE_NONE), |
| 324 | TYPE(PERIPHC_NVENC, CLOCK_TYPE_NONE), |
| 325 | TYPE(PERIPHC_84h, CLOCK_TYPE_NONE), |
| 326 | TYPE(PERIPHC_85h, CLOCK_TYPE_NONE), |
| 327 | TYPE(PERIPHC_86h, CLOCK_TYPE_NONE), |
| 328 | TYPE(PERIPHC_87h, CLOCK_TYPE_NONE), |
| 329 | |
| 330 | /* 0x88 */ |
| 331 | TYPE(PERIPHC_88h, CLOCK_TYPE_NONE), |
| 332 | TYPE(PERIPHC_89h, CLOCK_TYPE_NONE), |
| 333 | TYPE(PERIPHC_DMIC3, CLOCK_TYPE_NONE), |
| 334 | TYPE(PERIPHC_APE, CLOCK_TYPE_NONE), |
| 335 | TYPE(PERIPHC_QSPI, CLOCK_TYPE_PC01C00_C42C41TC40), |
| 336 | TYPE(PERIPHC_VI_I2C, CLOCK_TYPE_NONE), |
| 337 | TYPE(PERIPHC_USB2_HSIC_TRK, CLOCK_TYPE_NONE), |
| 338 | TYPE(PERIPHC_PEX_SATA_USB_RX_BYP, CLOCK_TYPE_NONE), |
| 339 | |
| 340 | /* 0x90 */ |
| 341 | TYPE(PERIPHC_MAUD, CLOCK_TYPE_NONE), |
| 342 | TYPE(PERIPHC_TSECB, CLOCK_TYPE_NONE), |
| 343 | }; |
| 344 | |
| 345 | /* |
| 346 | * This array translates a periph_id to a periphc_internal_id |
| 347 | * |
| 348 | * Not present/matched up: |
| 349 | * uint vi_sensor; _VI_SENSOR_0, 0x1A8 |
| 350 | * SPDIF - which is both 0x08 and 0x0c |
| 351 | * |
| 352 | */ |
| 353 | #define NONE(name) (-1) |
| 354 | #define OFFSET(name, value) PERIPHC_ ## name |
| 355 | #define INTERNAL_ID(id) (id & 0x000000ff) |
| 356 | static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = { |
| 357 | /* Low word: 31:0 */ |
| 358 | NONE(CPU), |
| 359 | NONE(COP), |
| 360 | NONE(TRIGSYS), |
| 361 | NONE(ISPB), |
| 362 | NONE(RESERVED4), |
| 363 | NONE(TMR), |
| 364 | PERIPHC_UART1, |
| 365 | PERIPHC_UART2, /* and vfir 0x68 */ |
| 366 | |
| 367 | /* 8 */ |
| 368 | NONE(GPIO), |
| 369 | PERIPHC_SDMMC2, |
| 370 | PERIPHC_SPDIF_IN, |
| 371 | PERIPHC_I2S2, |
| 372 | PERIPHC_I2C1, |
| 373 | NONE(RESERVED13), |
| 374 | PERIPHC_SDMMC1, |
| 375 | PERIPHC_SDMMC4, |
| 376 | |
| 377 | /* 16 */ |
| 378 | NONE(TCW), |
| 379 | PERIPHC_PWM, |
| 380 | PERIPHC_I2S3, |
| 381 | NONE(RESERVED19), |
| 382 | PERIPHC_VI, |
| 383 | NONE(RESERVED21), |
| 384 | NONE(USBD), |
| 385 | NONE(ISP), |
| 386 | |
| 387 | /* 24 */ |
| 388 | NONE(RESERVED24), |
| 389 | NONE(RESERVED25), |
| 390 | PERIPHC_DISP2, |
| 391 | PERIPHC_DISP1, |
| 392 | PERIPHC_HOST1X, |
| 393 | NONE(VCP), |
| 394 | PERIPHC_I2S1, |
| 395 | NONE(CACHE2), |
| 396 | |
| 397 | /* Middle word: 63:32 */ |
| 398 | NONE(MEM), |
| 399 | NONE(AHBDMA), |
| 400 | NONE(APBDMA), |
| 401 | NONE(RESERVED35), |
| 402 | NONE(RESERVED36), |
| 403 | NONE(STAT_MON), |
| 404 | NONE(RESERVED38), |
| 405 | NONE(FUSE), |
| 406 | |
| 407 | /* 40 */ |
| 408 | NONE(KFUSE), |
| 409 | PERIPHC_SBC1, /* SBCx = SPIx */ |
| 410 | PERIPHC_NOR, |
| 411 | NONE(RESERVED43), |
| 412 | PERIPHC_SBC2, |
| 413 | NONE(XIO), |
| 414 | PERIPHC_SBC3, |
| 415 | PERIPHC_I2C5, |
| 416 | |
| 417 | /* 48 */ |
| 418 | NONE(DSI), |
| 419 | NONE(RESERVED49), |
| 420 | PERIPHC_HSI, |
| 421 | NONE(RESERVED51), |
| 422 | NONE(CSI), |
| 423 | NONE(RESERVED53), |
| 424 | PERIPHC_I2C2, |
| 425 | PERIPHC_UART3, |
| 426 | |
| 427 | /* 56 */ |
| 428 | NONE(MIPI_CAL), |
| 429 | PERIPHC_EMC, |
| 430 | NONE(USB2), |
| 431 | NONE(USB3), |
| 432 | NONE(RESERVED60), |
| 433 | PERIPHC_VDE, |
| 434 | NONE(BSEA), |
| 435 | NONE(BSEV), |
| 436 | |
| 437 | /* Upper word 95:64 */ |
| 438 | NONE(RESERVED64), |
| 439 | PERIPHC_UART4, |
| 440 | PERIPHC_UART5, |
| 441 | PERIPHC_I2C3, |
| 442 | PERIPHC_SBC4, |
| 443 | PERIPHC_SDMMC3, |
| 444 | NONE(PCIE), |
| 445 | PERIPHC_OWR, |
| 446 | |
| 447 | /* 72 */ |
| 448 | NONE(AFI), |
| 449 | PERIPHC_CSITE, |
| 450 | NONE(PCIEXCLK), |
| 451 | NONE(AVPUCQ), |
| 452 | NONE(LA), |
| 453 | NONE(TRACECLKIN), |
| 454 | NONE(SOC_THERM), |
| 455 | NONE(DTV), |
| 456 | |
| 457 | /* 80 */ |
| 458 | NONE(RESERVED80), |
| 459 | PERIPHC_I2CSLOW, |
| 460 | NONE(DSIB), |
| 461 | PERIPHC_TSEC, |
| 462 | NONE(RESERVED84), |
| 463 | NONE(RESERVED85), |
| 464 | NONE(RESERVED86), |
| 465 | NONE(EMUCIF), |
| 466 | |
| 467 | /* 88 */ |
| 468 | NONE(RESERVED88), |
| 469 | NONE(XUSB_HOST), |
| 470 | NONE(RESERVED90), |
| 471 | PERIPHC_MSENC, |
| 472 | NONE(RESERVED92), |
| 473 | NONE(RESERVED93), |
| 474 | NONE(RESERVED94), |
| 475 | NONE(XUSB_DEV), |
| 476 | |
| 477 | /* V word: 31:0 */ |
| 478 | NONE(CPUG), |
| 479 | NONE(CPULP), |
| 480 | NONE(V_RESERVED2), |
| 481 | PERIPHC_MSELECT, |
| 482 | NONE(V_RESERVED4), |
| 483 | PERIPHC_I2S4, |
| 484 | PERIPHC_I2S5, |
| 485 | PERIPHC_I2C4, |
| 486 | |
| 487 | /* 104 */ |
| 488 | PERIPHC_SBC5, |
| 489 | PERIPHC_SBC6, |
| 490 | PERIPHC_AUDIO, |
| 491 | NONE(APBIF), |
| 492 | NONE(V_RESERVED12), |
| 493 | NONE(V_RESERVED13), |
| 494 | NONE(V_RESERVED14), |
| 495 | PERIPHC_HDA2CODEC2X, |
| 496 | |
| 497 | /* 112 */ |
| 498 | NONE(ATOMICS), |
| 499 | NONE(V_RESERVED17), |
| 500 | NONE(V_RESERVED18), |
| 501 | NONE(V_RESERVED19), |
| 502 | NONE(V_RESERVED20), |
| 503 | NONE(V_RESERVED21), |
| 504 | NONE(V_RESERVED22), |
| 505 | PERIPHC_ACTMON, |
| 506 | |
| 507 | /* 120 */ |
| 508 | NONE(EXTPERIPH1), |
| 509 | NONE(EXTPERIPH2), |
| 510 | NONE(EXTPERIPH3), |
| 511 | NONE(OOB), |
| 512 | PERIPHC_SATA, |
| 513 | PERIPHC_HDA, |
| 514 | NONE(TZRAM), |
| 515 | NONE(SE), |
| 516 | |
| 517 | /* W word: 31:0 */ |
| 518 | NONE(HDA2HDMICODEC), |
| 519 | NONE(SATACOLD), |
| 520 | NONE(W_RESERVED2), |
| 521 | NONE(W_RESERVED3), |
| 522 | NONE(W_RESERVED4), |
| 523 | NONE(W_RESERVED5), |
| 524 | NONE(W_RESERVED6), |
| 525 | NONE(W_RESERVED7), |
| 526 | |
| 527 | /* 136 */ |
| 528 | NONE(CEC), |
| 529 | NONE(W_RESERVED9), |
| 530 | NONE(W_RESERVED10), |
| 531 | NONE(W_RESERVED11), |
| 532 | NONE(W_RESERVED12), |
| 533 | NONE(W_RESERVED13), |
| 534 | NONE(XUSB_PADCTL), |
| 535 | NONE(W_RESERVED15), |
| 536 | |
| 537 | /* 144 */ |
| 538 | NONE(W_RESERVED16), |
| 539 | NONE(W_RESERVED17), |
| 540 | NONE(W_RESERVED18), |
| 541 | NONE(W_RESERVED19), |
| 542 | NONE(W_RESERVED20), |
| 543 | NONE(ENTROPY), |
| 544 | NONE(DDS), |
| 545 | NONE(W_RESERVED23), |
| 546 | |
| 547 | /* 152 */ |
| 548 | NONE(W_RESERVED24), |
| 549 | NONE(W_RESERVED25), |
| 550 | NONE(W_RESERVED26), |
| 551 | NONE(DVFS), |
| 552 | NONE(XUSB_SS), |
| 553 | NONE(W_RESERVED29), |
| 554 | NONE(W_RESERVED30), |
| 555 | NONE(W_RESERVED31), |
| 556 | |
| 557 | /* X word: 31:0 */ |
| 558 | NONE(SPARE), |
| 559 | NONE(X_RESERVED1), |
| 560 | NONE(X_RESERVED2), |
| 561 | NONE(X_RESERVED3), |
| 562 | NONE(CAM_MCLK), |
| 563 | NONE(CAM_MCLK2), |
| 564 | PERIPHC_I2C6, |
| 565 | NONE(X_RESERVED7), |
| 566 | |
| 567 | /* 168 */ |
| 568 | NONE(X_RESERVED8), |
| 569 | NONE(X_RESERVED9), |
| 570 | NONE(X_RESERVED10), |
| 571 | NONE(VIM2_CLK), |
| 572 | NONE(X_RESERVED12), |
| 573 | NONE(X_RESERVED13), |
| 574 | NONE(EMC_DLL), |
| 575 | NONE(X_RESERVED15), |
| 576 | |
| 577 | /* 176 */ |
| 578 | NONE(X_RESERVED16), |
| 579 | NONE(CLK72MHZ), |
| 580 | NONE(VIC), |
| 581 | NONE(X_RESERVED19), |
| 582 | NONE(X_RESERVED20), |
| 583 | NONE(DPAUX), |
| 584 | NONE(SOR0), |
| 585 | NONE(X_RESERVED23), |
| 586 | |
| 587 | /* 184 */ |
| 588 | NONE(GPU), |
| 589 | NONE(X_RESERVED25), |
| 590 | NONE(X_RESERVED26), |
| 591 | NONE(X_RESERVED27), |
| 592 | NONE(X_RESERVED28), |
| 593 | NONE(X_RESERVED29), |
| 594 | NONE(X_RESERVED30), |
| 595 | NONE(X_RESERVED31), |
| 596 | |
| 597 | /* Y: 192 (192 - 223) */ |
| 598 | NONE(Y_RESERVED0), |
| 599 | PERIPHC_SDMMC_LEGACY_TM, |
| 600 | PERIPHC_NVDEC, |
| 601 | PERIPHC_NVJPG, |
| 602 | NONE(Y_RESERVED4), |
| 603 | PERIPHC_DMIC3, /* 197 */ |
| 604 | PERIPHC_APE, /* 198 */ |
| 605 | NONE(Y_RESERVED7), |
| 606 | |
| 607 | /* 200 */ |
| 608 | NONE(Y_RESERVED8), |
| 609 | NONE(Y_RESERVED9), |
| 610 | NONE(Y_RESERVED10), |
| 611 | NONE(Y_RESERVED11), |
| 612 | NONE(Y_RESERVED12), |
| 613 | NONE(Y_RESERVED13), |
| 614 | NONE(Y_RESERVED14), |
| 615 | NONE(Y_RESERVED15), |
| 616 | |
| 617 | /* 208 */ |
| 618 | PERIPHC_VI_I2C, /* 208 */ |
| 619 | NONE(Y_RESERVED17), |
| 620 | NONE(Y_RESERVED18), |
| 621 | PERIPHC_QSPI, /* 211 */ |
| 622 | NONE(Y_RESERVED20), |
| 623 | NONE(Y_RESERVED21), |
| 624 | NONE(Y_RESERVED22), |
| 625 | NONE(Y_RESERVED23), |
| 626 | |
| 627 | /* 216 */ |
| 628 | NONE(Y_RESERVED24), |
| 629 | NONE(Y_RESERVED25), |
| 630 | NONE(Y_RESERVED26), |
| 631 | PERIPHC_NVENC, /* 219 */ |
| 632 | NONE(Y_RESERVED28), |
| 633 | NONE(Y_RESERVED29), |
| 634 | NONE(Y_RESERVED30), |
| 635 | NONE(Y_RESERVED31), |
| 636 | }; |
| 637 | |
| 638 | /* |
Tom Warren | 722e000 | 2015-06-25 09:50:44 -0700 | [diff] [blame] | 639 | * PLL divider shift/mask tables for all PLL IDs. |
| 640 | */ |
| 641 | struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = { |
| 642 | /* |
| 643 | * NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLC, etc.) |
| 644 | * If lock_ena or lock_det are >31, they're not used in that PLL (PLLC, etc.) |
| 645 | */ |
| 646 | { .m_shift = 0, .m_mask = 0xFF, .n_shift = 10, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F, |
| 647 | .lock_ena = 32, .lock_det = 27, .kcp_shift = 0, .kcp_mask = 0, .kvco_shift = 0, .kvco_mask = 0 }, /* PLLC */ |
| 648 | { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F, |
| 649 | .lock_ena = 4, .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLM */ |
| 650 | { .m_shift = 0, .m_mask = 0xFF, .n_shift = 10, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F, |
| 651 | .lock_ena = 18, .lock_det = 27, .kcp_shift = 0, .kcp_mask = 3, .kvco_shift = 2, .kvco_mask = 1 }, /* PLLP */ |
| 652 | { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F, |
| 653 | .lock_ena = 28, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 }, /* PLLA */ |
| 654 | { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 16, .p_mask = 0x1F, |
| 655 | .lock_ena = 29, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 }, /* PLLU */ |
| 656 | { .m_shift = 0, .m_mask = 0xFF, .n_shift = 11, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x07, |
| 657 | .lock_ena = 18, .lock_det = 27, .kcp_shift = 23, .kcp_mask = 3, .kvco_shift = 22, .kvco_mask = 1 }, /* PLLD */ |
| 658 | { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F, |
| 659 | .lock_ena = 18, .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLX */ |
| 660 | { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 0, .p_mask = 0, |
| 661 | .lock_ena = 9, .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLE */ |
| 662 | { .m_shift = 0, .m_mask = 0, .n_shift = 0, .n_mask = 0, .p_shift = 0, .p_mask = 0, |
| 663 | .lock_ena = 0, .lock_det = 0, .kcp_shift = 0, .kcp_mask = 0, .kvco_shift = 0, .kvco_mask = 0 }, /* PLLS (gone)*/ |
Simon Glass | 5a30cee | 2015-08-10 07:14:36 -0600 | [diff] [blame] | 664 | { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 19, .p_mask = 0x1F, |
| 665 | .lock_ena = 30, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 }, /* PLLDP */ |
Tom Warren | 722e000 | 2015-06-25 09:50:44 -0700 | [diff] [blame] | 666 | }; |
| 667 | |
| 668 | /* |
Tom Warren | 6c43f6c | 2015-02-02 13:22:29 -0700 | [diff] [blame] | 669 | * Get the oscillator frequency, from the corresponding hardware configuration |
| 670 | * field. Note that Tegra30+ support 3 new higher freqs, but we map back |
| 671 | * to the old T20 freqs. Support for the higher oscillators is TBD. |
| 672 | */ |
| 673 | enum clock_osc_freq clock_get_osc_freq(void) |
| 674 | { |
| 675 | struct clk_rst_ctlr *clkrst = |
| 676 | (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; |
| 677 | u32 reg; |
| 678 | |
| 679 | reg = readl(&clkrst->crc_osc_ctrl); |
| 680 | reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT; |
| 681 | /* |
| 682 | * 0 = 13MHz, 1 = 16.8MHz, 4 = 19.2MHz, 5 = 38.4MHz, |
| 683 | * 8 = 12MHz, 9 = 48MHz, 12 = 26MHz |
| 684 | */ |
| 685 | if (reg == 5) { |
| 686 | debug("OSC_FREQ is 38.4MHz (%d) ...\n", reg); |
Tom Warren | 3e8650c | 2015-06-22 13:03:44 -0700 | [diff] [blame] | 687 | /* Map it to the 5th CLOCK_OSC_ enum, i.e. 4 */ |
| 688 | return 4; |
Tom Warren | 6c43f6c | 2015-02-02 13:22:29 -0700 | [diff] [blame] | 689 | } |
| 690 | |
| 691 | /* |
| 692 | * Map to most common (T20) freqs (except 38.4, handled above): |
| 693 | * 13/16.8 = 0, 19.2 = 1, 12/48 = 2, 26 = 3 |
| 694 | */ |
| 695 | return reg >> 2; |
| 696 | } |
| 697 | |
| 698 | /* Returns a pointer to the clock source register for a peripheral */ |
| 699 | u32 *get_periph_source_reg(enum periph_id periph_id) |
| 700 | { |
| 701 | struct clk_rst_ctlr *clkrst = |
| 702 | (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; |
| 703 | enum periphc_internal_id internal_id; |
| 704 | |
| 705 | /* Coresight is a special case */ |
| 706 | if (periph_id == PERIPH_ID_CSI) |
| 707 | return &clkrst->crc_clk_src[PERIPH_ID_CSI+1]; |
| 708 | |
| 709 | assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT); |
| 710 | internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]); |
| 711 | assert(internal_id != -1); |
| 712 | |
| 713 | if (internal_id < PERIPHC_VW_FIRST) |
| 714 | /* L, H, U */ |
| 715 | return &clkrst->crc_clk_src[internal_id]; |
| 716 | |
| 717 | if (internal_id < PERIPHC_X_FIRST) { |
| 718 | /* VW */ |
| 719 | internal_id -= PERIPHC_VW_FIRST; |
| 720 | return &clkrst->crc_clk_src_vw[internal_id]; |
| 721 | } |
| 722 | |
| 723 | if (internal_id < PERIPHC_Y_FIRST) { |
| 724 | /* X */ |
| 725 | internal_id -= PERIPHC_X_FIRST; |
| 726 | return &clkrst->crc_clk_src_x[internal_id]; |
| 727 | } |
| 728 | |
| 729 | /* Y */ |
| 730 | internal_id -= PERIPHC_Y_FIRST; |
| 731 | return &clkrst->crc_clk_src_y[internal_id]; |
| 732 | } |
| 733 | |
| 734 | /** |
| 735 | * Given a peripheral ID and the required source clock, this returns which |
| 736 | * value should be programmed into the source mux for that peripheral. |
| 737 | * |
| 738 | * There is special code here to handle the one source type with 5 sources. |
| 739 | * |
| 740 | * @param periph_id peripheral to start |
| 741 | * @param source PLL id of required parent clock |
| 742 | * @param mux_bits Set to number of bits in mux register: 2 or 4 |
| 743 | * @param divider_bits Set to number of divider bits (8 or 16) |
| 744 | * @return mux value (0-4, or -1 if not found) |
| 745 | */ |
| 746 | int get_periph_clock_source(enum periph_id periph_id, |
| 747 | enum clock_id parent, int *mux_bits, int *divider_bits) |
| 748 | { |
| 749 | enum clock_type_id type; |
| 750 | enum periphc_internal_id internal_id; |
| 751 | int mux; |
| 752 | |
| 753 | assert(clock_periph_id_isvalid(periph_id)); |
| 754 | |
| 755 | internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]); |
| 756 | assert(periphc_internal_id_isvalid(internal_id)); |
| 757 | |
| 758 | type = clock_periph_type[internal_id]; |
| 759 | assert(clock_type_id_isvalid(type)); |
| 760 | |
| 761 | *mux_bits = clock_source[type][CLOCK_MAX_MUX]; |
| 762 | |
| 763 | if (type == CLOCK_TYPE_PC2CC3M_T16) |
| 764 | *divider_bits = 16; |
| 765 | else |
| 766 | *divider_bits = 8; |
| 767 | |
| 768 | for (mux = 0; mux < CLOCK_MAX_MUX; mux++) |
| 769 | if (clock_source[type][mux] == parent) |
| 770 | return mux; |
| 771 | |
| 772 | /* if we get here, either us or the caller has made a mistake */ |
| 773 | printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id, |
| 774 | parent); |
| 775 | return -1; |
| 776 | } |
| 777 | |
| 778 | void clock_set_enable(enum periph_id periph_id, int enable) |
| 779 | { |
| 780 | struct clk_rst_ctlr *clkrst = |
| 781 | (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; |
| 782 | u32 *clk; |
| 783 | u32 reg; |
| 784 | |
| 785 | /* Enable/disable the clock to this peripheral */ |
| 786 | assert(clock_periph_id_isvalid(periph_id)); |
| 787 | if ((int)periph_id < (int)PERIPH_ID_VW_FIRST) |
| 788 | clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)]; |
| 789 | else if ((int)periph_id < (int)PERIPH_ID_X_FIRST) |
| 790 | clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)]; |
| 791 | else if ((int)periph_id < (int)PERIPH_ID_Y_FIRST) |
| 792 | clk = &clkrst->crc_clk_out_enb_x; |
| 793 | else |
| 794 | clk = &clkrst->crc_clk_out_enb_y; |
| 795 | |
| 796 | reg = readl(clk); |
| 797 | if (enable) |
| 798 | reg |= PERIPH_MASK(periph_id); |
| 799 | else |
| 800 | reg &= ~PERIPH_MASK(periph_id); |
| 801 | writel(reg, clk); |
| 802 | } |
| 803 | |
| 804 | void reset_set_enable(enum periph_id periph_id, int enable) |
| 805 | { |
| 806 | struct clk_rst_ctlr *clkrst = |
| 807 | (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; |
| 808 | u32 *reset; |
| 809 | u32 reg; |
| 810 | |
| 811 | /* Enable/disable reset to the peripheral */ |
| 812 | assert(clock_periph_id_isvalid(periph_id)); |
| 813 | if (periph_id < PERIPH_ID_VW_FIRST) |
| 814 | reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)]; |
| 815 | else if ((int)periph_id < (int)PERIPH_ID_X_FIRST) |
| 816 | reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)]; |
| 817 | else if ((int)periph_id < (int)PERIPH_ID_Y_FIRST) |
| 818 | reset = &clkrst->crc_rst_devices_x; |
| 819 | else |
| 820 | reset = &clkrst->crc_rst_devices_y; |
| 821 | |
| 822 | reg = readl(reset); |
| 823 | if (enable) |
| 824 | reg |= PERIPH_MASK(periph_id); |
| 825 | else |
| 826 | reg &= ~PERIPH_MASK(periph_id); |
| 827 | writel(reg, reset); |
| 828 | } |
| 829 | |
| 830 | #ifdef CONFIG_OF_CONTROL |
| 831 | /* |
| 832 | * Convert a device tree clock ID to our peripheral ID. They are mostly |
| 833 | * the same but we are very cautious so we check that a valid clock ID is |
| 834 | * provided. |
| 835 | * |
| 836 | * @param clk_id Clock ID according to tegra210 device tree binding |
| 837 | * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid |
| 838 | */ |
| 839 | enum periph_id clk_id_to_periph_id(int clk_id) |
| 840 | { |
| 841 | if (clk_id > PERIPH_ID_COUNT) |
| 842 | return PERIPH_ID_NONE; |
| 843 | |
| 844 | switch (clk_id) { |
| 845 | case PERIPH_ID_RESERVED4: |
| 846 | case PERIPH_ID_RESERVED25: |
| 847 | case PERIPH_ID_RESERVED35: |
| 848 | case PERIPH_ID_RESERVED36: |
| 849 | case PERIPH_ID_RESERVED38: |
| 850 | case PERIPH_ID_RESERVED43: |
| 851 | case PERIPH_ID_RESERVED49: |
| 852 | case PERIPH_ID_RESERVED53: |
| 853 | case PERIPH_ID_RESERVED64: |
| 854 | case PERIPH_ID_RESERVED84: |
| 855 | case PERIPH_ID_RESERVED85: |
| 856 | case PERIPH_ID_RESERVED86: |
| 857 | case PERIPH_ID_RESERVED88: |
| 858 | case PERIPH_ID_RESERVED90: |
| 859 | case PERIPH_ID_RESERVED92: |
| 860 | case PERIPH_ID_RESERVED93: |
| 861 | case PERIPH_ID_RESERVED94: |
| 862 | case PERIPH_ID_V_RESERVED2: |
| 863 | case PERIPH_ID_V_RESERVED4: |
| 864 | case PERIPH_ID_V_RESERVED17: |
| 865 | case PERIPH_ID_V_RESERVED18: |
| 866 | case PERIPH_ID_V_RESERVED19: |
| 867 | case PERIPH_ID_V_RESERVED20: |
| 868 | case PERIPH_ID_V_RESERVED21: |
| 869 | case PERIPH_ID_V_RESERVED22: |
| 870 | case PERIPH_ID_W_RESERVED2: |
| 871 | case PERIPH_ID_W_RESERVED3: |
| 872 | case PERIPH_ID_W_RESERVED4: |
| 873 | case PERIPH_ID_W_RESERVED5: |
| 874 | case PERIPH_ID_W_RESERVED6: |
| 875 | case PERIPH_ID_W_RESERVED7: |
| 876 | case PERIPH_ID_W_RESERVED9: |
| 877 | case PERIPH_ID_W_RESERVED10: |
| 878 | case PERIPH_ID_W_RESERVED11: |
| 879 | case PERIPH_ID_W_RESERVED12: |
| 880 | case PERIPH_ID_W_RESERVED13: |
| 881 | case PERIPH_ID_W_RESERVED15: |
| 882 | case PERIPH_ID_W_RESERVED16: |
| 883 | case PERIPH_ID_W_RESERVED17: |
| 884 | case PERIPH_ID_W_RESERVED18: |
| 885 | case PERIPH_ID_W_RESERVED19: |
| 886 | case PERIPH_ID_W_RESERVED20: |
| 887 | case PERIPH_ID_W_RESERVED23: |
| 888 | case PERIPH_ID_W_RESERVED29: |
| 889 | case PERIPH_ID_W_RESERVED30: |
| 890 | case PERIPH_ID_W_RESERVED31: |
| 891 | return PERIPH_ID_NONE; |
| 892 | default: |
| 893 | return clk_id; |
| 894 | } |
| 895 | } |
| 896 | #endif /* CONFIG_OF_CONTROL */ |
| 897 | |
| 898 | /* |
| 899 | * T210 redefines PLLP_OUT2 as PLLP_VCO/DIVP, so do different OUT1-4 setup here. |
| 900 | * PLLP_BASE/MISC/etc. is already set up for 408MHz in the BootROM. |
| 901 | */ |
| 902 | void tegra210_setup_pllp(void) |
| 903 | { |
| 904 | struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; |
| 905 | u32 reg; |
| 906 | |
| 907 | /* Set PLLP_OUT1, 3 & 4 freqs to 9.6, 102 & 204MHz */ |
| 908 | |
| 909 | /* OUT1 */ |
| 910 | /* Assert RSTN before enable */ |
| 911 | reg = PLLP_OUT1_RSTN_EN; |
| 912 | writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]); |
| 913 | /* Set divisor and reenable */ |
| 914 | reg = (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO) |
| 915 | | PLLP_OUT1_OVR | PLLP_OUT1_CLKEN | PLLP_OUT1_RSTN_DIS; |
| 916 | writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]); |
| 917 | |
| 918 | /* OUT3, 4 */ |
| 919 | /* Assert RSTN before enable */ |
| 920 | reg = PLLP_OUT4_RSTN_EN | PLLP_OUT3_RSTN_EN; |
| 921 | writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]); |
| 922 | /* Set divisor and reenable */ |
| 923 | reg = (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO) |
| 924 | | PLLP_OUT4_OVR | PLLP_OUT4_CLKEN | PLLP_OUT4_RSTN_DIS |
| 925 | | (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO) |
| 926 | | PLLP_OUT3_OVR | PLLP_OUT3_CLKEN | PLLP_OUT3_RSTN_DIS; |
| 927 | writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]); |
| 928 | |
| 929 | /* |
| 930 | * NOTE: If you want to change PLLP_OUT2 away from 204MHz, |
| 931 | * you can change PLLP_BASE DIVP here. Currently defaults |
| 932 | * to 1, which is 2^1, or 2, so PLLP_OUT2 is 204MHz. |
| 933 | * See Table 13 in section 5.1.4 in T210 TRM for more info. |
| 934 | */ |
| 935 | } |
| 936 | |
| 937 | void clock_early_init(void) |
| 938 | { |
| 939 | struct clk_rst_ctlr *clkrst = |
| 940 | (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; |
Tom Warren | 722e000 | 2015-06-25 09:50:44 -0700 | [diff] [blame] | 941 | struct clk_pll_info *pllinfo = &tegra_pll_info_table[CLOCK_ID_DISPLAY]; |
Tom Warren | 6c43f6c | 2015-02-02 13:22:29 -0700 | [diff] [blame] | 942 | u32 data; |
| 943 | |
| 944 | tegra210_setup_pllp(); |
| 945 | |
| 946 | /* |
| 947 | * PLLC output frequency set to 600Mhz |
| 948 | * PLLD output frequency set to 925Mhz |
| 949 | */ |
| 950 | switch (clock_get_osc_freq()) { |
| 951 | case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ |
| 952 | clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8); |
| 953 | clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12); |
| 954 | break; |
| 955 | |
| 956 | case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */ |
| 957 | clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8); |
| 958 | clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12); |
| 959 | break; |
| 960 | |
| 961 | case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */ |
| 962 | clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8); |
| 963 | clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12); |
| 964 | break; |
| 965 | case CLOCK_OSC_FREQ_19_2: |
| 966 | clock_set_rate(CLOCK_ID_CGENERAL, 125, 4, 0, 0); |
| 967 | clock_set_rate(CLOCK_ID_DISPLAY, 96, 2, 0, 12); |
| 968 | break; |
Tom Warren | 3e8650c | 2015-06-22 13:03:44 -0700 | [diff] [blame] | 969 | case CLOCK_OSC_FREQ_38_4: |
| 970 | clock_set_rate(CLOCK_ID_CGENERAL, 125, 8, 0, 0); |
| 971 | clock_set_rate(CLOCK_ID_DISPLAY, 96, 4, 0, 0); |
| 972 | break; |
Tom Warren | 6c43f6c | 2015-02-02 13:22:29 -0700 | [diff] [blame] | 973 | default: |
| 974 | /* |
| 975 | * These are not supported. It is too early to print a |
| 976 | * message and the UART likely won't work anyway due to the |
| 977 | * oscillator being wrong. |
| 978 | */ |
| 979 | break; |
| 980 | } |
| 981 | |
| 982 | /* PLLC_MISC1: Turn IDDQ off. NOTE: T210 PLLC_MISC_1 maps to pll_misc */ |
| 983 | clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, |
| 984 | (1 << PLLC_IDDQ)); |
| 985 | udelay(2); |
| 986 | |
| 987 | /* |
| 988 | * PLLC_MISC: Take PLLC out of reset. NOTE: T210 PLLC_MISC maps |
| 989 | * to pll_out[1] |
| 990 | */ |
| 991 | clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1], |
| 992 | (1 << PLLC_RESET)); |
| 993 | udelay(2); |
| 994 | |
| 995 | /* PLLD_MISC: Set CLKENABLE and LOCK_DETECT bits */ |
Tom Warren | 722e000 | 2015-06-25 09:50:44 -0700 | [diff] [blame] | 996 | data = (1 << PLLD_ENABLE_CLK) | (1 << pllinfo->lock_ena); |
Tom Warren | 6c43f6c | 2015-02-02 13:22:29 -0700 | [diff] [blame] | 997 | writel(data, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc); |
| 998 | udelay(2); |
| 999 | } |
| 1000 | |
| 1001 | void arch_timer_init(void) |
| 1002 | { |
| 1003 | struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE; |
| 1004 | u32 freq, val; |
| 1005 | |
| 1006 | freq = clock_get_rate(CLOCK_ID_OSC); |
| 1007 | debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq); |
| 1008 | |
| 1009 | /* ARM CNTFRQ */ |
| 1010 | #ifndef CONFIG_ARM64 |
| 1011 | asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq)); |
| 1012 | #endif |
| 1013 | |
| 1014 | /* Only Tegra114+ has the System Counter regs */ |
| 1015 | debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq); |
| 1016 | writel(freq, &sysctr->cntfid0); |
| 1017 | |
| 1018 | val = readl(&sysctr->cntcr); |
| 1019 | val |= TSC_CNTCR_ENABLE | TSC_CNTCR_HDBG; |
| 1020 | writel(val, &sysctr->cntcr); |
| 1021 | debug("%s: TSC CNTCR = 0x%08X\n", __func__, val); |
| 1022 | } |
| 1023 | |
| 1024 | #define PLLE_SS_CNTL 0x68 |
| 1025 | #define PLLE_SS_CNTL_SSCINCINTR(x) (((x) & 0x3f) << 24) |
| 1026 | #define PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16) |
| 1027 | #define PLLE_SS_CNTL_SSCINVERT (1 << 15) |
| 1028 | #define PLLE_SS_CNTL_SSCCENTER (1 << 14) |
| 1029 | #define PLLE_SS_CNTL_SSCBYP (1 << 12) |
| 1030 | #define PLLE_SS_CNTL_INTERP_RESET (1 << 11) |
| 1031 | #define PLLE_SS_CNTL_BYPASS_SS (1 << 10) |
| 1032 | #define PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0) |
| 1033 | |
| 1034 | #define PLLE_BASE 0x0e8 |
| 1035 | #define PLLE_BASE_ENABLE (1 << 30) |
| 1036 | #define PLLE_BASE_LOCK_OVERRIDE (1 << 29) |
| 1037 | #define PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24) |
| 1038 | #define PLLE_BASE_NDIV(x) (((x) & 0xff) << 8) |
| 1039 | #define PLLE_BASE_MDIV(x) (((x) & 0xff) << 0) |
| 1040 | |
| 1041 | #define PLLE_MISC 0x0ec |
| 1042 | #define PLLE_MISC_IDDQ_SWCTL (1 << 14) |
| 1043 | #define PLLE_MISC_IDDQ_OVERRIDE (1 << 13) |
| 1044 | #define PLLE_MISC_LOCK_ENABLE (1 << 9) |
| 1045 | #define PLLE_MISC_PTS (1 << 8) |
| 1046 | #define PLLE_MISC_VREG_BG_CTRL(x) (((x) & 0x3) << 4) |
| 1047 | #define PLLE_MISC_VREG_CTRL(x) (((x) & 0x3) << 2) |
| 1048 | |
| 1049 | #define PLLE_AUX 0x48c |
| 1050 | #define PLLE_AUX_SEQ_ENABLE (1 << 24) |
| 1051 | #define PLLE_AUX_ENABLE_SWCTL (1 << 4) |
| 1052 | |
| 1053 | int tegra_plle_enable(void) |
| 1054 | { |
| 1055 | unsigned int m = 1, n = 200, cpcon = 13; |
| 1056 | u32 value; |
| 1057 | |
| 1058 | value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); |
| 1059 | value &= ~PLLE_BASE_LOCK_OVERRIDE; |
| 1060 | writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); |
| 1061 | |
| 1062 | value = readl(NV_PA_CLK_RST_BASE + PLLE_AUX); |
| 1063 | value |= PLLE_AUX_ENABLE_SWCTL; |
| 1064 | value &= ~PLLE_AUX_SEQ_ENABLE; |
| 1065 | writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX); |
| 1066 | |
| 1067 | udelay(1); |
| 1068 | |
| 1069 | value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); |
| 1070 | value |= PLLE_MISC_IDDQ_SWCTL; |
| 1071 | value &= ~PLLE_MISC_IDDQ_OVERRIDE; |
| 1072 | value |= PLLE_MISC_LOCK_ENABLE; |
| 1073 | value |= PLLE_MISC_PTS; |
| 1074 | value |= PLLE_MISC_VREG_BG_CTRL(3); |
| 1075 | value |= PLLE_MISC_VREG_CTRL(2); |
| 1076 | writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC); |
| 1077 | |
| 1078 | udelay(5); |
| 1079 | |
| 1080 | value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); |
| 1081 | value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET | |
| 1082 | PLLE_SS_CNTL_BYPASS_SS; |
| 1083 | writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); |
| 1084 | |
| 1085 | value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); |
| 1086 | value &= ~PLLE_BASE_PLDIV_CML(0xf); |
| 1087 | value &= ~PLLE_BASE_NDIV(0xff); |
| 1088 | value &= ~PLLE_BASE_MDIV(0xff); |
| 1089 | value |= PLLE_BASE_PLDIV_CML(cpcon); |
| 1090 | value |= PLLE_BASE_NDIV(n); |
| 1091 | value |= PLLE_BASE_MDIV(m); |
| 1092 | writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); |
| 1093 | |
| 1094 | udelay(1); |
| 1095 | |
| 1096 | value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); |
| 1097 | value |= PLLE_BASE_ENABLE; |
| 1098 | writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); |
| 1099 | |
| 1100 | /* wait for lock */ |
| 1101 | udelay(300); |
| 1102 | |
| 1103 | value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); |
| 1104 | value &= ~PLLE_SS_CNTL_SSCINVERT; |
| 1105 | value &= ~PLLE_SS_CNTL_SSCCENTER; |
| 1106 | |
| 1107 | value &= ~PLLE_SS_CNTL_SSCINCINTR(0x3f); |
| 1108 | value &= ~PLLE_SS_CNTL_SSCINC(0xff); |
| 1109 | value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff); |
| 1110 | |
| 1111 | value |= PLLE_SS_CNTL_SSCINCINTR(0x20); |
| 1112 | value |= PLLE_SS_CNTL_SSCINC(0x01); |
| 1113 | value |= PLLE_SS_CNTL_SSCMAX(0x25); |
| 1114 | |
| 1115 | writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); |
| 1116 | |
| 1117 | value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); |
| 1118 | value &= ~PLLE_SS_CNTL_SSCBYP; |
| 1119 | value &= ~PLLE_SS_CNTL_BYPASS_SS; |
| 1120 | writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); |
| 1121 | |
| 1122 | udelay(1); |
| 1123 | |
| 1124 | value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); |
| 1125 | value &= ~PLLE_SS_CNTL_INTERP_RESET; |
| 1126 | writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); |
| 1127 | |
| 1128 | udelay(1); |
| 1129 | |
| 1130 | return 0; |
| 1131 | } |