Paul Burton | d772713 | 2018-12-16 19:25:20 -0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Ingenic JZ MMC driver |
| 4 | * |
| 5 | * Copyright (c) 2013 Imagination Technologies |
| 6 | * Author: Paul Burton <paul.burton@imgtec.com> |
| 7 | */ |
| 8 | |
| 9 | #include <common.h> |
| 10 | #include <malloc.h> |
| 11 | #include <mmc.h> |
| 12 | #include <asm/io.h> |
| 13 | #include <asm/unaligned.h> |
| 14 | #include <errno.h> |
Simon Glass | 336d461 | 2020-02-03 07:36:16 -0700 | [diff] [blame] | 15 | #include <dm/device_compat.h> |
Simon Glass | c05ed00 | 2020-05-10 11:40:11 -0600 | [diff] [blame^] | 16 | #include <linux/delay.h> |
Paul Burton | d772713 | 2018-12-16 19:25:20 -0300 | [diff] [blame] | 17 | #include <mach/jz4780.h> |
| 18 | #include <wait_bit.h> |
| 19 | |
| 20 | /* Registers */ |
| 21 | #define MSC_STRPCL 0x000 |
| 22 | #define MSC_STAT 0x004 |
| 23 | #define MSC_CLKRT 0x008 |
| 24 | #define MSC_CMDAT 0x00c |
| 25 | #define MSC_RESTO 0x010 |
| 26 | #define MSC_RDTO 0x014 |
| 27 | #define MSC_BLKLEN 0x018 |
| 28 | #define MSC_NOB 0x01c |
| 29 | #define MSC_SNOB 0x020 |
| 30 | #define MSC_IMASK 0x024 |
| 31 | #define MSC_IREG 0x028 |
| 32 | #define MSC_CMD 0x02c |
| 33 | #define MSC_ARG 0x030 |
| 34 | #define MSC_RES 0x034 |
| 35 | #define MSC_RXFIFO 0x038 |
| 36 | #define MSC_TXFIFO 0x03c |
| 37 | #define MSC_LPM 0x040 |
| 38 | #define MSC_DMAC 0x044 |
| 39 | #define MSC_DMANDA 0x048 |
| 40 | #define MSC_DMADA 0x04c |
| 41 | #define MSC_DMALEN 0x050 |
| 42 | #define MSC_DMACMD 0x054 |
| 43 | #define MSC_CTRL2 0x058 |
| 44 | #define MSC_RTCNT 0x05c |
| 45 | #define MSC_DBG 0x0fc |
| 46 | |
| 47 | /* MSC Clock and Control Register (MSC_STRPCL) */ |
| 48 | #define MSC_STRPCL_EXIT_MULTIPLE BIT(7) |
| 49 | #define MSC_STRPCL_EXIT_TRANSFER BIT(6) |
| 50 | #define MSC_STRPCL_START_READWAIT BIT(5) |
| 51 | #define MSC_STRPCL_STOP_READWAIT BIT(4) |
| 52 | #define MSC_STRPCL_RESET BIT(3) |
| 53 | #define MSC_STRPCL_START_OP BIT(2) |
| 54 | #define MSC_STRPCL_CLOCK_CONTROL_STOP BIT(0) |
| 55 | #define MSC_STRPCL_CLOCK_CONTROL_START BIT(1) |
| 56 | |
| 57 | /* MSC Status Register (MSC_STAT) */ |
| 58 | #define MSC_STAT_AUTO_CMD_DONE BIT(31) |
| 59 | #define MSC_STAT_IS_RESETTING BIT(15) |
| 60 | #define MSC_STAT_SDIO_INT_ACTIVE BIT(14) |
| 61 | #define MSC_STAT_PRG_DONE BIT(13) |
| 62 | #define MSC_STAT_DATA_TRAN_DONE BIT(12) |
| 63 | #define MSC_STAT_END_CMD_RES BIT(11) |
| 64 | #define MSC_STAT_DATA_FIFO_AFULL BIT(10) |
| 65 | #define MSC_STAT_IS_READWAIT BIT(9) |
| 66 | #define MSC_STAT_CLK_EN BIT(8) |
| 67 | #define MSC_STAT_DATA_FIFO_FULL BIT(7) |
| 68 | #define MSC_STAT_DATA_FIFO_EMPTY BIT(6) |
| 69 | #define MSC_STAT_CRC_RES_ERR BIT(5) |
| 70 | #define MSC_STAT_CRC_READ_ERROR BIT(4) |
| 71 | #define MSC_STAT_CRC_WRITE_ERROR BIT(2) |
| 72 | #define MSC_STAT_CRC_WRITE_ERROR_NOSTS BIT(4) |
| 73 | #define MSC_STAT_TIME_OUT_RES BIT(1) |
| 74 | #define MSC_STAT_TIME_OUT_READ BIT(0) |
| 75 | |
| 76 | /* MSC Bus Clock Control Register (MSC_CLKRT) */ |
| 77 | #define MSC_CLKRT_CLK_RATE_MASK 0x7 |
| 78 | |
| 79 | /* MSC Command Sequence Control Register (MSC_CMDAT) */ |
| 80 | #define MSC_CMDAT_IO_ABORT BIT(11) |
| 81 | #define MSC_CMDAT_BUS_WIDTH_1BIT (0x0 << 9) |
| 82 | #define MSC_CMDAT_BUS_WIDTH_4BIT (0x2 << 9) |
| 83 | #define MSC_CMDAT_DMA_EN BIT(8) |
| 84 | #define MSC_CMDAT_INIT BIT(7) |
| 85 | #define MSC_CMDAT_BUSY BIT(6) |
| 86 | #define MSC_CMDAT_STREAM_BLOCK BIT(5) |
| 87 | #define MSC_CMDAT_WRITE BIT(4) |
| 88 | #define MSC_CMDAT_DATA_EN BIT(3) |
| 89 | #define MSC_CMDAT_RESPONSE_MASK (0x7 << 0) |
| 90 | #define MSC_CMDAT_RESPONSE_NONE (0x0 << 0) /* No response */ |
| 91 | #define MSC_CMDAT_RESPONSE_R1 (0x1 << 0) /* Format R1 and R1b */ |
| 92 | #define MSC_CMDAT_RESPONSE_R2 (0x2 << 0) /* Format R2 */ |
| 93 | #define MSC_CMDAT_RESPONSE_R3 (0x3 << 0) /* Format R3 */ |
| 94 | #define MSC_CMDAT_RESPONSE_R4 (0x4 << 0) /* Format R4 */ |
| 95 | #define MSC_CMDAT_RESPONSE_R5 (0x5 << 0) /* Format R5 */ |
| 96 | #define MSC_CMDAT_RESPONSE_R6 (0x6 << 0) /* Format R6 */ |
| 97 | |
| 98 | /* MSC Interrupts Mask Register (MSC_IMASK) */ |
| 99 | #define MSC_IMASK_TIME_OUT_RES BIT(9) |
| 100 | #define MSC_IMASK_TIME_OUT_READ BIT(8) |
| 101 | #define MSC_IMASK_SDIO BIT(7) |
| 102 | #define MSC_IMASK_TXFIFO_WR_REQ BIT(6) |
| 103 | #define MSC_IMASK_RXFIFO_RD_REQ BIT(5) |
| 104 | #define MSC_IMASK_END_CMD_RES BIT(2) |
| 105 | #define MSC_IMASK_PRG_DONE BIT(1) |
| 106 | #define MSC_IMASK_DATA_TRAN_DONE BIT(0) |
| 107 | |
| 108 | /* MSC Interrupts Status Register (MSC_IREG) */ |
| 109 | #define MSC_IREG_TIME_OUT_RES BIT(9) |
| 110 | #define MSC_IREG_TIME_OUT_READ BIT(8) |
| 111 | #define MSC_IREG_SDIO BIT(7) |
| 112 | #define MSC_IREG_TXFIFO_WR_REQ BIT(6) |
| 113 | #define MSC_IREG_RXFIFO_RD_REQ BIT(5) |
| 114 | #define MSC_IREG_END_CMD_RES BIT(2) |
| 115 | #define MSC_IREG_PRG_DONE BIT(1) |
| 116 | #define MSC_IREG_DATA_TRAN_DONE BIT(0) |
| 117 | |
| 118 | struct jz_mmc_plat { |
| 119 | struct mmc_config cfg; |
| 120 | struct mmc mmc; |
| 121 | }; |
| 122 | |
| 123 | struct jz_mmc_priv { |
| 124 | void __iomem *regs; |
| 125 | u32 flags; |
| 126 | /* priv flags */ |
| 127 | #define JZ_MMC_BUS_WIDTH_MASK 0x3 |
| 128 | #define JZ_MMC_BUS_WIDTH_1 0x0 |
| 129 | #define JZ_MMC_BUS_WIDTH_4 0x2 |
| 130 | #define JZ_MMC_BUS_WIDTH_8 0x3 |
| 131 | #define JZ_MMC_SENT_INIT BIT(2) |
| 132 | }; |
| 133 | |
| 134 | static int jz_mmc_clock_rate(void) |
| 135 | { |
| 136 | return 24000000; |
| 137 | } |
| 138 | |
Ezequiel Garcia | 82d5464 | 2019-01-07 18:13:25 -0300 | [diff] [blame] | 139 | #if CONFIG_IS_ENABLED(MMC_WRITE) |
| 140 | static inline void jz_mmc_write_data(struct jz_mmc_priv *priv, struct mmc_data *data) |
| 141 | { |
| 142 | int sz = DIV_ROUND_UP(data->blocks * data->blocksize, 4); |
| 143 | const void *buf = data->src; |
| 144 | |
| 145 | while (sz--) { |
| 146 | u32 val = get_unaligned_le32(buf); |
| 147 | |
| 148 | wait_for_bit_le32(priv->regs + MSC_IREG, |
| 149 | MSC_IREG_TXFIFO_WR_REQ, |
| 150 | true, 10000, false); |
| 151 | writel(val, priv->regs + MSC_TXFIFO); |
| 152 | buf += 4; |
| 153 | } |
| 154 | } |
| 155 | #else |
| 156 | static void jz_mmc_write_data(struct jz_mmc_priv *priv, struct mmc_data *data) |
| 157 | {} |
| 158 | #endif |
| 159 | |
| 160 | static inline int jz_mmc_read_data(struct jz_mmc_priv *priv, struct mmc_data *data) |
| 161 | { |
| 162 | int sz = data->blocks * data->blocksize; |
| 163 | void *buf = data->dest; |
| 164 | u32 stat, val; |
| 165 | |
| 166 | do { |
| 167 | stat = readl(priv->regs + MSC_STAT); |
| 168 | |
| 169 | if (stat & MSC_STAT_TIME_OUT_READ) |
| 170 | return -ETIMEDOUT; |
| 171 | if (stat & MSC_STAT_CRC_READ_ERROR) |
| 172 | return -EINVAL; |
| 173 | if (stat & MSC_STAT_DATA_FIFO_EMPTY) { |
| 174 | udelay(10); |
| 175 | continue; |
| 176 | } |
| 177 | do { |
| 178 | val = readl(priv->regs + MSC_RXFIFO); |
| 179 | if (sz == 1) |
| 180 | *(u8 *)buf = (u8)val; |
| 181 | else if (sz == 2) |
| 182 | put_unaligned_le16(val, buf); |
| 183 | else if (sz >= 4) |
| 184 | put_unaligned_le32(val, buf); |
| 185 | buf += 4; |
| 186 | sz -= 4; |
| 187 | stat = readl(priv->regs + MSC_STAT); |
| 188 | } while (!(stat & MSC_STAT_DATA_FIFO_EMPTY)); |
| 189 | } while (!(stat & MSC_STAT_DATA_TRAN_DONE)); |
| 190 | return 0; |
| 191 | } |
| 192 | |
Paul Burton | d772713 | 2018-12-16 19:25:20 -0300 | [diff] [blame] | 193 | static int jz_mmc_send_cmd(struct mmc *mmc, struct jz_mmc_priv *priv, |
| 194 | struct mmc_cmd *cmd, struct mmc_data *data) |
| 195 | { |
| 196 | u32 stat, mask, cmdat = 0; |
| 197 | int i, ret; |
| 198 | |
| 199 | /* stop the clock */ |
| 200 | writel(MSC_STRPCL_CLOCK_CONTROL_STOP, priv->regs + MSC_STRPCL); |
| 201 | ret = wait_for_bit_le32(priv->regs + MSC_STAT, |
| 202 | MSC_STAT_CLK_EN, false, 10000, false); |
| 203 | if (ret) |
| 204 | return ret; |
| 205 | |
| 206 | writel(0, priv->regs + MSC_DMAC); |
| 207 | |
| 208 | /* setup command */ |
| 209 | writel(cmd->cmdidx, priv->regs + MSC_CMD); |
| 210 | writel(cmd->cmdarg, priv->regs + MSC_ARG); |
| 211 | |
| 212 | if (data) { |
| 213 | /* setup data */ |
| 214 | cmdat |= MSC_CMDAT_DATA_EN; |
| 215 | if (data->flags & MMC_DATA_WRITE) |
| 216 | cmdat |= MSC_CMDAT_WRITE; |
| 217 | |
| 218 | writel(data->blocks, priv->regs + MSC_NOB); |
| 219 | writel(data->blocksize, priv->regs + MSC_BLKLEN); |
| 220 | } else { |
| 221 | writel(0, priv->regs + MSC_NOB); |
| 222 | writel(0, priv->regs + MSC_BLKLEN); |
| 223 | } |
| 224 | |
| 225 | /* setup response */ |
| 226 | switch (cmd->resp_type) { |
| 227 | case MMC_RSP_NONE: |
| 228 | break; |
| 229 | case MMC_RSP_R1: |
| 230 | case MMC_RSP_R1b: |
| 231 | cmdat |= MSC_CMDAT_RESPONSE_R1; |
| 232 | break; |
| 233 | case MMC_RSP_R2: |
| 234 | cmdat |= MSC_CMDAT_RESPONSE_R2; |
| 235 | break; |
| 236 | case MMC_RSP_R3: |
| 237 | cmdat |= MSC_CMDAT_RESPONSE_R3; |
| 238 | break; |
| 239 | default: |
| 240 | break; |
| 241 | } |
| 242 | |
| 243 | if (cmd->resp_type & MMC_RSP_BUSY) |
| 244 | cmdat |= MSC_CMDAT_BUSY; |
| 245 | |
| 246 | /* set init for the first command only */ |
| 247 | if (!(priv->flags & JZ_MMC_SENT_INIT)) { |
| 248 | cmdat |= MSC_CMDAT_INIT; |
| 249 | priv->flags |= JZ_MMC_SENT_INIT; |
| 250 | } |
| 251 | |
| 252 | cmdat |= (priv->flags & JZ_MMC_BUS_WIDTH_MASK) << 9; |
| 253 | |
| 254 | /* write the data setup */ |
| 255 | writel(cmdat, priv->regs + MSC_CMDAT); |
| 256 | |
| 257 | /* unmask interrupts */ |
| 258 | mask = 0xffffffff & ~(MSC_IMASK_END_CMD_RES | MSC_IMASK_TIME_OUT_RES); |
| 259 | if (data) { |
| 260 | mask &= ~MSC_IMASK_DATA_TRAN_DONE; |
| 261 | if (data->flags & MMC_DATA_WRITE) { |
| 262 | mask &= ~MSC_IMASK_TXFIFO_WR_REQ; |
| 263 | } else { |
| 264 | mask &= ~(MSC_IMASK_RXFIFO_RD_REQ | |
| 265 | MSC_IMASK_TIME_OUT_READ); |
| 266 | } |
| 267 | } |
| 268 | writel(mask, priv->regs + MSC_IMASK); |
| 269 | |
| 270 | /* clear interrupts */ |
| 271 | writel(0xffffffff, priv->regs + MSC_IREG); |
| 272 | |
| 273 | /* start the command (& the clock) */ |
| 274 | writel(MSC_STRPCL_START_OP | MSC_STRPCL_CLOCK_CONTROL_START, |
| 275 | priv->regs + MSC_STRPCL); |
| 276 | |
| 277 | /* wait for completion */ |
| 278 | for (i = 0; i < 100; i++) { |
| 279 | stat = readl(priv->regs + MSC_IREG); |
| 280 | stat &= MSC_IREG_END_CMD_RES | MSC_IREG_TIME_OUT_RES; |
| 281 | if (stat) |
| 282 | break; |
| 283 | mdelay(1); |
| 284 | } |
| 285 | writel(stat, priv->regs + MSC_IREG); |
| 286 | if (stat & MSC_IREG_TIME_OUT_RES) |
| 287 | return -ETIMEDOUT; |
| 288 | |
| 289 | if (cmd->resp_type & MMC_RSP_PRESENT) { |
| 290 | /* read the response */ |
| 291 | if (cmd->resp_type & MMC_RSP_136) { |
| 292 | u16 a, b, c, i; |
| 293 | |
| 294 | a = readw(priv->regs + MSC_RES); |
| 295 | for (i = 0; i < 4; i++) { |
| 296 | b = readw(priv->regs + MSC_RES); |
| 297 | c = readw(priv->regs + MSC_RES); |
| 298 | cmd->response[i] = |
| 299 | (a << 24) | (b << 8) | (c >> 8); |
| 300 | a = c; |
| 301 | } |
| 302 | } else { |
| 303 | cmd->response[0] = readw(priv->regs + MSC_RES) << 24; |
| 304 | cmd->response[0] |= readw(priv->regs + MSC_RES) << 8; |
| 305 | cmd->response[0] |= readw(priv->regs + MSC_RES) & 0xff; |
| 306 | } |
| 307 | } |
Ezequiel Garcia | 82d5464 | 2019-01-07 18:13:25 -0300 | [diff] [blame] | 308 | if (data) { |
| 309 | if (data->flags & MMC_DATA_WRITE) |
| 310 | jz_mmc_write_data(priv, data); |
| 311 | else if (data->flags & MMC_DATA_READ) { |
| 312 | ret = jz_mmc_read_data(priv, data); |
| 313 | if (ret) |
| 314 | return ret; |
Paul Burton | d772713 | 2018-12-16 19:25:20 -0300 | [diff] [blame] | 315 | } |
Paul Burton | d772713 | 2018-12-16 19:25:20 -0300 | [diff] [blame] | 316 | } |
| 317 | |
| 318 | return 0; |
| 319 | } |
| 320 | |
| 321 | static int jz_mmc_set_ios(struct mmc *mmc, struct jz_mmc_priv *priv) |
| 322 | { |
| 323 | u32 real_rate = jz_mmc_clock_rate(); |
| 324 | u8 clk_div = 0; |
| 325 | |
| 326 | /* calculate clock divide */ |
| 327 | while ((real_rate > mmc->clock) && (clk_div < 7)) { |
| 328 | real_rate >>= 1; |
| 329 | clk_div++; |
| 330 | } |
| 331 | writel(clk_div & MSC_CLKRT_CLK_RATE_MASK, priv->regs + MSC_CLKRT); |
| 332 | |
| 333 | /* set the bus width for the next command */ |
| 334 | priv->flags &= ~JZ_MMC_BUS_WIDTH_MASK; |
| 335 | if (mmc->bus_width == 8) |
| 336 | priv->flags |= JZ_MMC_BUS_WIDTH_8; |
| 337 | else if (mmc->bus_width == 4) |
| 338 | priv->flags |= JZ_MMC_BUS_WIDTH_4; |
| 339 | else |
| 340 | priv->flags |= JZ_MMC_BUS_WIDTH_1; |
| 341 | |
| 342 | return 0; |
| 343 | } |
| 344 | |
| 345 | static int jz_mmc_core_init(struct mmc *mmc) |
| 346 | { |
| 347 | struct jz_mmc_priv *priv = mmc->priv; |
| 348 | int ret; |
| 349 | |
| 350 | /* Reset */ |
| 351 | writel(MSC_STRPCL_RESET, priv->regs + MSC_STRPCL); |
| 352 | ret = wait_for_bit_le32(priv->regs + MSC_STAT, |
| 353 | MSC_STAT_IS_RESETTING, false, 10000, false); |
| 354 | if (ret) |
| 355 | return ret; |
| 356 | |
| 357 | /* Maximum timeouts */ |
| 358 | writel(0xffff, priv->regs + MSC_RESTO); |
| 359 | writel(0xffffffff, priv->regs + MSC_RDTO); |
| 360 | |
| 361 | /* Enable low power mode */ |
| 362 | writel(0x1, priv->regs + MSC_LPM); |
| 363 | |
| 364 | return 0; |
| 365 | } |
| 366 | |
| 367 | #if !CONFIG_IS_ENABLED(DM_MMC) |
| 368 | |
| 369 | static int jz_mmc_legacy_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, |
| 370 | struct mmc_data *data) |
| 371 | { |
| 372 | struct jz_mmc_priv *priv = mmc->priv; |
| 373 | |
| 374 | return jz_mmc_send_cmd(mmc, priv, cmd, data); |
| 375 | } |
| 376 | |
| 377 | static int jz_mmc_legacy_set_ios(struct mmc *mmc) |
| 378 | { |
| 379 | struct jz_mmc_priv *priv = mmc->priv; |
| 380 | |
| 381 | return jz_mmc_set_ios(mmc, priv); |
| 382 | }; |
| 383 | |
| 384 | static const struct mmc_ops jz_msc_ops = { |
| 385 | .send_cmd = jz_mmc_legacy_send_cmd, |
| 386 | .set_ios = jz_mmc_legacy_set_ios, |
| 387 | .init = jz_mmc_core_init, |
| 388 | }; |
| 389 | |
| 390 | static struct jz_mmc_priv jz_mmc_priv_static; |
| 391 | static struct jz_mmc_plat jz_mmc_plat_static = { |
| 392 | .cfg = { |
| 393 | .name = "MSC", |
| 394 | .ops = &jz_msc_ops, |
| 395 | |
| 396 | .voltages = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | |
| 397 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | |
| 398 | MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36, |
| 399 | .host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS, |
| 400 | |
| 401 | .f_min = 375000, |
| 402 | .f_max = 48000000, |
| 403 | .b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, |
| 404 | }, |
| 405 | }; |
| 406 | |
| 407 | int jz_mmc_init(void __iomem *base) |
| 408 | { |
| 409 | struct mmc *mmc; |
| 410 | |
| 411 | jz_mmc_priv_static.regs = base; |
| 412 | |
| 413 | mmc = mmc_create(&jz_mmc_plat_static.cfg, &jz_mmc_priv_static); |
| 414 | |
| 415 | return mmc ? 0 : -ENODEV; |
| 416 | } |
| 417 | |
| 418 | #else /* CONFIG_DM_MMC */ |
| 419 | |
| 420 | #include <dm.h> |
| 421 | DECLARE_GLOBAL_DATA_PTR; |
| 422 | |
| 423 | static int jz_mmc_dm_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, |
| 424 | struct mmc_data *data) |
| 425 | { |
| 426 | struct jz_mmc_priv *priv = dev_get_priv(dev); |
| 427 | struct mmc *mmc = mmc_get_mmc_dev(dev); |
| 428 | |
| 429 | return jz_mmc_send_cmd(mmc, priv, cmd, data); |
| 430 | } |
| 431 | |
| 432 | static int jz_mmc_dm_set_ios(struct udevice *dev) |
| 433 | { |
| 434 | struct jz_mmc_priv *priv = dev_get_priv(dev); |
| 435 | struct mmc *mmc = mmc_get_mmc_dev(dev); |
| 436 | |
| 437 | return jz_mmc_set_ios(mmc, priv); |
| 438 | }; |
| 439 | |
| 440 | static const struct dm_mmc_ops jz_msc_ops = { |
| 441 | .send_cmd = jz_mmc_dm_send_cmd, |
| 442 | .set_ios = jz_mmc_dm_set_ios, |
| 443 | }; |
| 444 | |
| 445 | static int jz_mmc_ofdata_to_platdata(struct udevice *dev) |
| 446 | { |
| 447 | struct jz_mmc_priv *priv = dev_get_priv(dev); |
| 448 | struct jz_mmc_plat *plat = dev_get_platdata(dev); |
| 449 | struct mmc_config *cfg; |
| 450 | int ret; |
| 451 | |
| 452 | priv->regs = map_physmem(devfdt_get_addr(dev), 0x100, MAP_NOCACHE); |
| 453 | cfg = &plat->cfg; |
| 454 | |
| 455 | cfg->name = "MSC"; |
| 456 | cfg->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS; |
| 457 | |
| 458 | ret = mmc_of_parse(dev, cfg); |
| 459 | if (ret < 0) { |
| 460 | dev_err(dev, "failed to parse host caps\n"); |
| 461 | return ret; |
| 462 | } |
| 463 | |
| 464 | cfg->f_min = 400000; |
| 465 | cfg->f_max = 52000000; |
| 466 | |
| 467 | cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; |
| 468 | cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; |
| 469 | |
| 470 | return 0; |
| 471 | } |
| 472 | |
| 473 | static int jz_mmc_bind(struct udevice *dev) |
| 474 | { |
| 475 | struct jz_mmc_plat *plat = dev_get_platdata(dev); |
| 476 | |
| 477 | return mmc_bind(dev, &plat->mmc, &plat->cfg); |
| 478 | } |
| 479 | |
| 480 | static int jz_mmc_probe(struct udevice *dev) |
| 481 | { |
| 482 | struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| 483 | struct jz_mmc_priv *priv = dev_get_priv(dev); |
| 484 | struct jz_mmc_plat *plat = dev_get_platdata(dev); |
| 485 | |
| 486 | plat->mmc.priv = priv; |
| 487 | upriv->mmc = &plat->mmc; |
| 488 | return jz_mmc_core_init(&plat->mmc); |
| 489 | } |
| 490 | |
| 491 | static const struct udevice_id jz_mmc_ids[] = { |
| 492 | { .compatible = "ingenic,jz4780-mmc" }, |
| 493 | { } |
| 494 | }; |
| 495 | |
| 496 | U_BOOT_DRIVER(jz_mmc_drv) = { |
| 497 | .name = "jz_mmc", |
| 498 | .id = UCLASS_MMC, |
| 499 | .of_match = jz_mmc_ids, |
| 500 | .ofdata_to_platdata = jz_mmc_ofdata_to_platdata, |
| 501 | .bind = jz_mmc_bind, |
| 502 | .probe = jz_mmc_probe, |
| 503 | .priv_auto_alloc_size = sizeof(struct jz_mmc_priv), |
| 504 | .platdata_auto_alloc_size = sizeof(struct jz_mmc_plat), |
| 505 | .ops = &jz_msc_ops, |
| 506 | }; |
| 507 | #endif /* CONFIG_DM_MMC */ |